How can I find what Event a photo is in when that photo is found via Faces?

I've stumbled upon a photo via the Faces category. I do not know what Event this photo exists in, but I'd like to know (this same issue can occur with a photo found via Places of course too). How do I find out what Event this photo exists in? Of course I can pull the date or title data from the photo and then search for that data and visually find the photo from the search results, but I would assume there would be a much much easier method.
None of the information data seems to contain any event data. I would think each photo would contain information as to what Event it currently resides in.

Wait until iPhoto is done scanning for new images in the ".. might also be in the photos below" section, then right click (or Option-Click if your mouse has no right button) on the image, and in the last group of the menu that pops up should be an item "Show Event". While it's still scanning for more faces, the "Show Event" menu item isn't shown yet.
Message was edited by: tilman

Similar Messages

  • How can I find what apple ID I used to register my iMac when I first booted up? I am being told that by using this ID I will be able to go on to the App store and down load iPhoto at no cost. Is this true? My iMac does not have iPhoto resident on it now

    How can I find what apple ID I used to register my iMac when I first booted up? I am being told that by using this ID I will be able to go on to the App store and down load iPhoto at no cost. Is this true? My iMac does not have iPhoto resident on it now and I only purchased my new iMac in December 2012
    Thanks....

    Launch Keychain Access and click on Login in the left hand pane and then on Passwords.  Next do search for Apple in the search field at the top and click on Apple ID Authenicication in the list that comes up.  That will give you the ID no. and password.
    OT

  • I've installed LR on my new Mac - How do I find/what is the name of the file that opens to bring up my existing photos (on my external hd)?

    I've installed LR on my new Mac - How do I find/what is the name of the file that opens to bring up my existing photos (on my external hd)?

    Bookmarks and history are stored together in your profile folder in a database file named places.sqlite. These articles should help with restoring as much or as little of your other profile as you like:
    Locating the folder: [https://support.mozilla.com/en-US/kb/Profiles Profiles | How to | Firefox Help]
    The following article has suggestions for recovering bookmarks: [http://support.mozilla.com/en-US/kb/Lost%20Bookmarks Lost Bookmarks | Troubleshooting | Firefox Help].
    To move more settings, see: [https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile Recovering important data from an old profile].
    Hope this helps.

  • HT5622 how can I find what the charges aree to my credit card from the apple store? I get multiple charges every month and don't know what they are for...I want to cancel whatever is being charged to me...how do I do it?

    how can I find what the charges aree to my credit card from the apple store? I get multiple charges every month and don't know what they are for...I want to cancel whatever is being charged to me...how do I do it?

    Have a look at this link
    http://support.apple.com/kb/ht2727

  • HT4910 how can i find what devices are sync to my laptop as mine is saying 5 i dont no why

    how can i find what devies are synced with my computer as in itunes says 5 i dont have 5

    That information is not available.
    De-authorizing Computers (contributed by user John Galt)
    You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
      1. Open iTunes on a computer
      2. From the Store menu, select "View my Account..."
      3. Sign in with your Apple ID and password.
      4. Under "Computer Authorizations" select "De-authorize All".
      5. Authorize each computer you still have, as you may require.
    You may only do this once per year.
    After you "de-authorize all" your authorized computers, re-authorize each one as required.
    If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.
    For more information on authorization and de-authorization: iTunes Store- Authorize or deauthorize your Mac or PC.

  • How can I find and delete duplicate photos?

    How can I find and delete duplicate photos in iPhoto 2011?

    Duplicate Annihalitor - http://brattoo.com/propaganda/ - or Decloner - http://www.pixelespressoapps.com/decloner/
    LN

  • How can I find and remove duplicate photos from my computer?

    How can I find and remove duplicate photos from my computer?

    Terence,
    Yes, the duplicates appear in the iPhoto window. I have folders with same name occuring two or even three times sometimes with exactly the same set of photos (ie photos with the same ID) and sometimes with a limited set of photos. Other  folders appear only once.
    I normally take my MacBook with me if I'm shooting a lot of photos, such as on holiday, and then want to transfer them to my iMac when i get home. Other times I transfer the camera's memory stick directly to my iMac.
    I have great difficulty transferring the photos from my MacBook to my iMac. I don't want to store my photos on my iDisk due to the length of time it takes to upload them.
    Thanks again.
    Simon

  • I forgot my Security Question and Security Info email. How can I reset my Secret Question or how can I find what was my Security Info email is?

    I forgot my Security Question and Security Info email. How can I reset my Secret Question or how can I find what was my Security Info email is?

    You won't be able to view and/or change your rescue email address until you can answer your security question(s). If you only have one security question then you should be able to reset it according to http://support.apple.com/kb/HT6170 :
    Reset your security questions
    Go to My Apple ID (appleid.apple.com).
    Select “Manage your Apple ID” and sign in.
    Select “Password and Security” on the left side of the page.
    If you have only one security question, you can change the question and answer now.
    If you have more than one security question:
    Select “Send reset security info email to [your rescue email address].” If you don't see this link or don't have access to your rescue address, contact Apple Support as described in the next section.
    Your rescue address will receive a reset email from Apple. Follow its instructions to reset your security questions and set up new questions and answers. Didn't receive the email ?
    After resetting your security questions, consider turning on two-step verification. With two-step verification, you don't need security questions to secure your account or verify your identity.
    If you have more than one question then as you can't remember your rescue email address then you will need to contact Support in your country to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When they've been reset you can then use the steps on this page to view and/or change your rescue email address for potential future use : http://support.apple.com/kb/HT5620
    Or if it's available in your country you could change to 2-step verification : http://support.apple.com/kb/HT5570

  • How can I find the serial number for my stolen iPad that's associated with my apple ID ?

    How can I find the serial number for my stolen iPad that's associated with my apple ID ?

    If you registered it with Apple check your registered items at Your Support Profile for Registered Purchases. Also, see iOS- How to find the serial number, IMEI, MEID, CDN, and ICCID number.
    What To Do If Your iDevice Is Lost Or Stolen
    If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. What to do if your iOS device is lost or stolen
      6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      7. Find My iPhone
      8. Report Stolen iPad | Stolen Lost Found Online
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

  • How can I find out which Contact list in my outlook that iCloud is syncing with?

    How can I find out which Contact list in my outlook that iCloud is syncing with?

    Try the helpful tips in the following link to possibly make Outlook and iCloud play nice with your contacts:
    http://www.slipstick.com/outlook/icloud-outlook-problems-syncing-contacts/

  • My Ipad and macbookair have been stolen. How can I find the imei code of both devices considering that were all registered on icloud?

    My Ipad and macbookair have been stolen. How can I find the imei code of both devices considering that were all registered on icloud?

    Unless you have configured iCloud on the MacBook Air and made sure that Find My Mac was turned on, you can't track that.  And even if you did do that, that is not a foolproof method of tracking, as it relies on the thief connecting to the internet using the guest account on the machine and not getting in to your account and disabling Find My Mac or wiping the hard drive and installing a clean system.
    As for the iPad, similar rules apply there.  If it is a wifi-only iPad, it cannot be tracked any other way.  If it has 3G, your wireless carrier may be able to help you track it.

  • How can I find what scom group a specific server belongs to using powershell?

    Environment:  SCOM 2007 r2
    Server in question:  Running Windows 2003 Std. (yes I know this sounds crazy)
    Why do I need this:  I noticed at the console level we have had server unexpected shutdown events which are not generating email notifications. 
    Source shows: Windows 2003 Server Standard Edition
    Alert Rule:  Windows Shutdown Unexpectedly
    From what I see these are all windows 2003 server Std edition systems.  I did a track and trace using our exchange tracking system which confirmed the alerts were not being emailed. Not sure if there is a better approach for this, but not being a sql
    expert (however I do have someone I can leverage) I am trying to see if I can somehow extract this information using powershell.
    Secondary general question:  How can I find out the current size of our scom 2007 database and the number of objkects\servers being monitored? This is prep work for a migration over to 2012.
    Thanks in advance for the help!

    1. what scom group a specific server belongs to
    function Get-GroupNames {
     [cmdletbinding()]
     param($computerFQDN)
     $containmentRel = Get-RelationshipClass -name:’Microsoft.SystemCenter.InstanceGroupContainsEntities’
    $computerClass = Get-MonitoringClass -name:”Microsoft.Windows.Computer”
    $criteria = [string]::Format(“PrincipalName = ‘{0}’”,$computerFQDN)
     try {
     $computer = Get-MonitoringObject -monitoringClass:$computerClass -criteria:$criteria
     $relatedObjects = $computer.GetMonitoringRelationshipObjectsWhereTarget($containmentRel,[Microsoft.EnterpriseManagement.Configuration.DerivedClassTraversalDepth]::Recursive,[Microsoft.EnterpriseManagement.Common.TraversalDepth]::Recursive)
     catch {
     $_
     write-host “An error occurred while querying groups of $computerFQDN”
    foreach($group in $relatedObjects)
     [array]$Groups = $groups + $group.SourceMonitoringObject.DisplayName
     if($groups) {
     return $groups
     } else {
     write-host “No groups available for $computerFQDN”
    Usage:
     Get-GroupName -ComputerFQDN myserver1
    for detail, pls. refer to
    http://techibee.com/powershell/powershell-get-scom-groups-of-a-computer-account/1129
    Roger

  • How can I find what time a tab was opened in Safari?

    How can I find out what time a tab was opened in Safari?

    As of Safari 5.1.7 there does not appear to be a way to view the time in the browser, but it is still possbile to find from the raw history file. Open /Users/[yourusername]/library/Safari/History.plist in a text editor. Depending on how your text editor reads the file, you may see a lot of garbled text, but you should still be able to find the URL that you want the time for. After the URL you may see the page's title, but should also see a left square bracket followed by numbers.
    Example:
    _?http://www.apple.com/_Apple[377832904.6o
    The integer is an Apple timestamp (number of seconds since 00:00:00 UTC on 1 January 2001). Find a timestamp calculator online to get the actual time for your timestamp. In the example above, Apple was visited on Dec 21 2012 at 17:35:04 PST.
    Cheers.

  • How can I find what's really in my Library?

    After several problematic days, I finally installed iTunes 9.
    The new version then imported multiple files (so fast I hardly saw what half of them were, but they were additional to all my regular/ previous files - things like voice memos and other stuff).
    I notice that my memory usage has gone up considerably (even though I cannot see a lot of those new imported files in iTunes anywhere).
    Question: how can I find (and get rid of) what those imported files were please? On my c: drive folder I can see the iTunes folder with album artwork, games, music, applications, previous libraries - but I think there is much more stuff hidden around somewhere - any ideas please?

    What you see in your +My Music\iTunes+ folder is pretty much everything that takes up space. Be careful changing the files here, though. ITunes will not notice if you move or delete something, so the entry that points to it in iTunes will get a "!" mark. Better to review your libraries in iTunes and delete stuff you don't want, opting to move them to the Recycle Bin.
    The only other place iTunes stores anything (except for its own .exe stuff in +Program Files+, of course) is in the hidden system folder Application Data. In your Windows XP, you can view this folder by opening a Run box ( +Start > Run+ ) and typing %appdata%.

  • HT1925 how can i find what gb is my phone

    how can i tell what gb my iphone is & how big is my camera

    Please be aware that you are not communicating with Apple when you post in these forums. The only people who will reply to your posts are we your fellow users, and none of us get paid to help here, so it may take a while before someone replies. It also helps if you post in the correct forum; this is the QuickTime forum, not the iPhone forum.
    Regards.

Maybe you are looking for

  • Berkeley DB XML crash with multiple readers (dbxml-2.5.16 and db-4.8.26)

    I am using Berkeley DB XML (v. 2.5.16 and the bundled underlying Berkeley DB 4.8.26, which I suppose is now fairly old) to manage an XML database which is read by a large number (order 100) of independent worker processes communicating via MPI. These

  • Error in 5.1 logs on startup

    Hi, I seem to be getting the following error every once in a while, does anyone know what this could be caused by? cos_cache_getref: no cos cache created thanks

  • Automatic delivery dates in sales order.

    Hi all, The problem is that, The sales order is taking current date as delivery date , although ther are all config exist for availabiltity chek and Delivery & Transportation scheduling. The goods reciept processing time is 5 days in master record(MR

  • Discoverer 10 g drill down report regarding

    hi actually report has already done in oracle discoverer 4i ,now i want to upgrade to oracle discoverer 10 g . so could you help me in getting the upgrade to 10 g . thanks mahesh

  • Update after addition of authorization objects

    Hi, I had inserted an authorization objects in my zprogram. The testing is completed. My question: 1. is there any other place which I need to update this object information eg. SU24 / SU22 2. if it is required, what's the impact if I did not do it?