How can I fix a problem with Mail in my i-Phone?

I have an older i-Phone. For the past few weeks, when I check my e-mail, the bar at the bottom of the screen is blank.  There are no graphics and there is nowhere to click to respond to the message or delete it, etc.  How do I restore the various commands to my e-mail screen?

Basics from the manual are restart, reset, restore.
You could also try deleting the account, then adding it back.

Similar Messages

  • How can I fix my problem with importation of mediafiles

    Hi folks! Got a big trouble, my macbook nearly crashes (after some water inrush) and I took the opotrunity to rescue all my itune songs by exporting them on a DVD (I guess the right expression is mediafiles for them) I burn them on the DVD and put them to my PC. The importation went quite smoothly but after done some of the files can't play back. A message pop out which told me that it isn't allowed to open this file for me without logged in into itunes account. Its only allowed to log in with our user profile on max. 5 pc/macs. But I'm logged in, and my PC is the 4th of 5 PC for loggin in.
    Can anybody advice me how can I fix this problem and get all my songs played?
    Thnx in advance,
    KG
    Varo

    Have you authorized your computer to your iTunes Store account and not just signed into the account? For more information, see:
    http://support.apple.com/kb/HT1420?viewlocale=de_DE
    Regards.

  • How can I fix this problem with exporting Pages files?

    Hello,
    I'm having problems with exporting Pages files to Word or PDF (I haven't tried the other formats). Whenever I try to export the Page file, I get one message like this: "The document "XXXXXXX" could not be exported as "YYYYYYY". This problem started after the last Pages update, before that it was working fine. I restarted the computer, updated the OS, but the problem hasn't been solved.
    Does anyone know how to fix this problem?
    Thank you in advance!
    Best regards,
    Filipe

    Computers are made of parts made by humans and assembled by humans of materials that are not perfect.
    For example, a display cable that was accidentally pinched during assembly would pass quality control testing with flying colors and would not fail until the lid had been opened and closed several times.
    Likewise a display might not fail until powered on and off a few hundred times.

  • How can I fix a problem with incorrect drive capacity?

    When I do a get info on the drive capacity it says I have only 2.64gb free. However when I open it and total the folders there is near 300gb free which is what it should be. I can't find what is taking up the space

    First, empty the Trash if you haven't already done so. Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of your data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    To locate large files, you can use Spotlight. That method may not find large folders that contain a lot of small files.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore your volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    Install ODS in the Applications folder as usual. Quit it if it's running.
    Triple-click the line of text below to select it, then copy the selected text to the Clipboard (command-C):sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders. It may take some minutes for ODS to list all the files.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with ODS, quit it and also quit Terminal.

  • How can I fix lockup problems with dashboard?

    I have two computers running snow leopard. Up until recently dashboard worked well on both. Now dashboard works great on one. The other runs some widgets, but most widgets now lock up.
    I noticed that users running Lion had similar problems. I followed the suggestions to delete the "com.apple.dashboard.plist"  and "com.apple.dashboard.client.plist", then rebooted. Tried this twice. No improvement.
    Can you help.

    Billy,
    In cases like this, the first guess is Align to Pixel Grid.
    You may select everything and then untick Align to Pixel Grid in the Transform palette, and also untick Align New Objects to Pixel Grid in the flyout options.
    You may avoid document types with that as default (RGB for web and the like) or change the default for such documents.

  • How can I fix my problems with precise details / accuracy (pathfinder / adjustment / re-sizing) ?

    For some times, my illustrator seems  to have a problem.
    The accuracy isn't good, for example, when I pathfind two shapes, the final shape isn't the expected result (the global shape is deformed).
    An other example, I can't manage to stick two shapes together, either they overlap, or there is a space between both...
    Could you help me please ?
    PS : sorry for my english
    Billy

    Billy,
    In cases like this, the first guess is Align to Pixel Grid.
    You may select everything and then untick Align to Pixel Grid in the Transform palette, and also untick Align New Objects to Pixel Grid in the flyout options.
    You may avoid document types with that as default (RGB for web and the like) or change the default for such documents.

  • How can I fix a problem with PGA Tour shot tracker?

    PGA Tour Shot Tracker will not display for the full field. It appears momentarily and then goes all black. I've disabled FlashBlock, AdBlock, and still no help. It (Shot Tracker) will work for groups and individual players, however.

    Hello Meaghan,
    Thank you for the details of the issue you are experiencing with iMessage.  I recommend the following steps for the issue you described:
    To resolve issues with sending and receiving iMessages, follow these steps first
    Check iMessage system status for current service issues.
    Go to Settings > Messages > Send & Receive and make sure that you have registered iMessage with your phone number or Apple ID and that you have selected iMessage for use. Learn more abouttroubleshooting iMessage registration if the phone number or Apple ID isn't available for use.
    Open Safari and navigate to www.apple.com to verify data connectivity. Learn more about troubleshootingcellular data or a Wi-Fi connection if a data connection isn't available.
    iMessage over cellular data might not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports. Go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while on a call if your network doesn't support simultaneous data and voice calls.
    Restart your device.
    Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    If you are still unable to send or receive an iMessage, follow these steps
    Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    Verify that the contact you are attempting to send a message to is registered with iMessage.
    If the issue occurs with a specific contact or contacts, back up orforward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and re-create the contact in the Contacts application. Create a new message to the newly created contact and try again.
    Back up and restore your device as new.
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I recently purchase an ipad2.  I also have a mac laptop.  Now, when I facetime call using my iphone to my ipad2 or mac, it states busy.  how can i fix this problem?  I have the same apple id e mail for both ipad2 and mac.  it might be getting confuse now.

    I recently purchase an ipad2.  I also have a mac laptop.  Now, when I facetime call using my iphone to my ipad2 or mac, it states busy.  how can i fix this problem?  I have the same apple id e mail for both ipad2 and mac.  it might be getting confuse now.  I want to be able to face time also using my ipad2 to my laptop especially if one of the members of the family is traveling.  Thanks.

    thanks.  your answer was correct, clearer.  I have another question, maybe you can answer.  I just purchase my ipad2 2 days ago.  yesterday, there was a sound.  today there is no sound.  there is a sound only in movies and you tube and music.  but no sound on all apps and keyboards.  I look it up and seems like ther are few that have this problem.  I called walmart coz I bought it there and they told me that they have not heard that before but if I can't fix it, just return it and exchange it with anew one since I have 14 days to do that.  I tried rebooting it and still won't work.  Should I just restore it?

  • When deleting messages I get this message:"74608.emlx" couldn't be copied to "Messages" because an item with the same name already exists.  How can I fix this problem?

    When trying to delete messages in mail, I've been getting this message:“74608.emlx” couldn’t be copied to “Messages” because an item with the same name already exists."  The numbers at the beginning are always different but the ".emlx" and the rest of the statement is always the same.  How can I fix this problem?
    Thanks
    Candy777

    HT2500 Error when deleting email: Apple Support Communities

  • HT1338 I updated my MacBook Pro with Mountain Lion and now it is starting slow and opening with some of the programs. How can I fix the problem?

    I updated my MacBook Pro with Mountain Lion and now it is slow in starting up and loads a number of probrams. How can I fix the problem?

    Have you tried starting in Safe Mode and see if the slowness still occurs?
    Restart holding the "shift" key.
    (Expect it to take longer to start this way because it runs a directory check first.)
    If this works look in System Preferences > Users & Groups > Login items and delete any third party login items (-), you can always add them back with the (+). Also look in /Library/Startup Items. Nothing is put in that folder by default, so anything in there is yours.
    Reboot normally and test.

  • HT1871 Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3

    Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3

    Could it be because the SIM card got damaged while I cut it to fit the IPhone?
    Very likely. Hard to believe the carrier in Mexico doesn't have a micro-SIM card available.
    Or somehow the Chinese carrier found out and locked it?
    No, which is not possible.
    What can I do? Get a new SIM and see if it works again?
    Get a micro-SIM from the carrier in Mexico that you don't have to manually cut down. If that carrier doesn't provide one, switch to another carrier that is not so low-budget.

  • Regarding iMessage, when i want to send text to a person in my contacts app, i've been getting a message saying the number has not been registered with iMessage.  How can one fix this problem?

    Regarding iMessage, when i want to send text to a person in my contacts app, i've been getting a message saying the number has not been registered with iMessage.  How can one fix this problem?  It works on the iPhone.

    It takes two to tango, maybe it's your recipient that has weak Internet/Cellular connections.

  • I have recently updated my iTunes to the latest software. Since then my iphone will not sync with the computer, it doesn't show up in my computer any more. The computer makes the bing sound as I plug in but i am unable to sync, how can I fix this problem?

    I have recently updated my iTunes to the latest software. Since then my iphone will not sync with itunes, it doesn't show up in my computer any more either. The computer makes the bing sound as I plug in but i am unable to sync, how can I fix this problem?

    http://support.apple.com/kb/TS1538

  • I want to know about imessages and how it works !! how to register a number with imessages?? I saved a number in contacts but when I try to send a message it say "! not delivered" in red mark.How can I fix this problem??

    I want to know about imessages and how it works !! how to register a number with imessages?? I saved a number in contacts but when I try to send a message it says "! not delivered" in red mark.How can I fix this problem??

    Perhaps something in this support article will help:
    http://support.apple.com/kb/TS2755
    Regards.

  • Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number:  *********

    Hello Apple. Iphone6 ios8.0.2. I have problem with activation imsg and fctm. My number doesnt display on both apps. I can only use them with my apple ID. How can i fix this problem. Country:Azerbaijan. Number:  *******
    <Edited by Host>

    Hello Khayalh,
    You should be able to link your phone number by following the steps in the article below. From your iPhone, sign out of FaceTime and iMessage and then sign back in and it should link. Check in the Start Conversation With and I Can Be Reached at section in iMessage and FaceTime respectively. 
    iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
    http://support.apple.com/kb/HT5538
    Regards,
    -Norm G. 

Maybe you are looking for

  • Mail crashes when trying to open mail with large attachment

    It used to work fine (years), but for past 6 months, if I try to open an email (with the blue ball to the left) that has a large attachment (any sort), it crashes, no error message. On restarting, mail that had been deleted is back, and the most rece

  • Selection problem in a JList !!!!

    I am using a JList and on the selection of an item in this JList - I enable and disable some buttons. I have currenlty added a ListSelectionListener that allows me to trap the valuechanged event and thus if any item in the list is selected / deselect

  • New Users Not Appearing On Login List - Help!

    Hello Mac geniuses, I run a 10.3.9 network in an elementary school, and I since returning from summer vacation I have had problems with many of my client eMacs not displaying the names of users I have added in WGM. These eMacs are also still displayi

  • Setting up Airport Time Capsule

    We will soon set up a Time Capsule and new iMac.  Is there a preference to whether the iMac should be hardwired through the LAN Input, or connected wirelessly? Thanks. Edward

  • Delivery and billing block

    Hi : It is strange to get deliveyr and billing block once I finished creating the sales order, and block reason is 01, I don't know which condition to trigger that block? Is it possible to investigate how is that triggered?