How can I format Satellite A10 PSA10C - CD/DVD drive is not working

How can I format my laptop?
The problem is that my CD-ROM is not working or it can't read any CDs.
Help me guys and btw, is it possible to format it using USB Flash Disk?
Tnx in advance
Model: PSA10C-035WM

I successfully restored my Toshiba 1110 with no CD Rom. The CD Rom on the Toshiba is not robust. Many of them fail. You need a copy of Windows 98 and a Copy of Windows XP. The XP you loaded on your desktop will work because the Windows Production Key should be on the bottom of your computer. You also need to buy an adapter from 40 pin to 44 pin for the EIDE cable. This will cost about $10 and will let you install the laptop HD in your desktop computer.
The problem is that you cannot Windows XP Setup unless you are in windows. You can, however, boot a Dos floppy disk. Windows XP will not run in the Toshiba unless it is set-up from inside the computer. My system involves creating a small partition on the hard drive and loading the contents of the CD into the partition then loading Windows from the partition.
1) Use windows XP in your Desktop to create a large partition C: with the HPFS and a small partition D: (10 GB) FAT. You can pull the data cable on your desktop Hard Drive so that you don't format it in error.
2) Copy the contents of the win98 directory on the Windows 98 disk to the same directory on the small partition. Copy the contents of the I386 directory on the XP disk to the same directory on the small partition. Copy the two Setup files from the root of the XP disk to the root of the small directory.
3) Reinstall the Hard drive in your laptop.
4) Boot the laptop with windows 98 or XP boot disk.
5) Setup windows 98 from D:\win98\setup
6) Boot window98 from D: and install Windows XP from D:\setup.
7) Download the Lan driver from the internet then install all other drivers from the internet.

Similar Messages

  • Satellite A500 and Win8 - DVD drive is not working

    I have upgraded my Satellite A500-17X to Windows 8,but now my DVD Drive will not work.
    Anyone know how I can get it working again.
    Thank You.
    Cumbrian

    Solution here:
    http://www.csd.toshiba.com/cgi-bin/t...e&soid=3516888
    *Uninstall the Toshiba programs:*
    • TOSHIBA Recovery Media Creator
    • TOSHIBA Disc Creator
    Then restart your PC using the Power-->Restart option in Windows 8.
    Your CD/DVD should be accessible now.
    For help with uninstalling these programs follow the instructions below
    *To Uninstall a program or application:*
    1. At the START screen type Control Panel
    2. Select Programs --> Uninstall a program
    3. Find the two programs listed above and uninstall these applications
    4. After the application programs are uninstalled restart your computer using the Power-->Restart option in Windows 8
    5. When the computer power back on the CD/DVD drive should be available
    If the CD/DVD drive still does not appear follow the instructions below to uninstall a device driver
    *To uninstall a device driver:*
    1. At the START screen type Device Manager
    2. Select Device Manager > DVD/CD-ROM drives > right click on the device displayed > select Uninstall.
    3. After the driver uninstalls, power down you computer using the restart method. The driver will install automatically when the computer restarts.
    4. The CD/DVD drive should now be shown.

  • Satellite P105 mat****a dvd drive does not work with Win 7

    Greetings,
    I need an upgrade on my dvd for my vintage Satellite P105.
    I want the fastest dvd burner possible at this time because I am a movie fan and keep them in digital storage.
    1) First should I go get an external drive or can I get top performance with an internal dvd replacement from a parts dealer or Toshiba?
    The problem is when I upgraded to windows 7 things changed. I lost my sound but solved that by using a legacy driver for Visa as apparently the sound "board" on the laptop is made for only Vista. Next I found the dvd drive which is a mitsu****a UJ-450s internal does not work or is extremely slow in backing up movies from discs or files. The available burner software also seems intended for Vista as performance was acceptable then. Even the dvd burner software does not work.
    2) So, my question to the mavens of multimedia is: What should be my next move?
    3) Should I go external and face the USB bottle neck or
    4) go for the bus speed on the internal dvd?
    5) Given that an internal dvd is better as it is exactly a dvd-ram/IDE as it currently is, or some other bus configuration.
    6) Most importantly, what dvd burner would give me 18x speed with current software like ConvertXtoDVD and fit as an external or -- better -- as an internal dvd replacement or my slow drive currently?
    Of course, if you could give me a model number and direct me to sales it would be much appreciated.
    Thank you all in advance.
    Rachel_1

    1) First should I go get an external drive or can I get top performance with an internal dvd replacement from a parts dealer or Toshiba?
    You should know that not all internal ODD>>>>>>>>>>>>>>>>>>>>>ODD?>>>>>>>>>> devices are compatible. You will need to use an compatible and supported ne and such device could be ordered from an local ASP.>>>>>>>>>>>>>>>>>ASP?>>>>>>>>>>>>>>>>>>>>>>>>> >>
    But its more expensive as an external CD/DVD device therefore you could also choose an external one which would be compatible with all possible notebooks and computers.
    Makes sense
    2) So, my question to the mavens of multimedia is: What should be my next move?
    As mentioned. Good option would be to buy an external ODD burner>>>>>>>>>>>>>>>>>>Okay>>>>>>>>>>>>>>>>>>>
    3) Should I go external and face the USB bottle neck or
    External device are compatible with all computers and are cheaper>>>>>>>>>>>>>>>>>yes, but isn't the data thru put slower with an external via USB or should I get firewire?>>>>>>>>>>>
    4) go for the bus speed on the internal dvd?
    If you have the money for an internal device and want to use it only with P105 then you can choose also an internal burner.>>>>>>>>>>>>they are $96 here at toshiba site>>>>>>>>>>>>
    e
    5) Given that an internal dvd is better as it is exactly a dvd-ram/IDE as it currently is, or some other bus configuration.
    As far as I know its an IDE interface but the device would support master or slave or c-sel>>>>>>>>>>>>>>>>>>>what is c-sel????>>>>>>>>>>>>> settings. As mentioned, you have to buy an Toshiba recommended one.>>>>>>>>>>>>>the one sold here would be recommended, would they not?>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    6) Most importantly, what dvd burner would give me 18x speed with current software like ConvertXtoDVD and fit as an external or -- better -- as an internal dvd replacement or my slow drive currently?
    Look point 5)>>>>>>>>>>>>>>>>so you agree that a bus connection is superior to a USB then?>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
    Thank you for your prompt reply. Could you comment on my questions add to your message?
    Rachel

  • I purchased Elements 13 for my Imac that doesn't have a DVD drive.  How can I install it without buying a DVD drive?  I would like to also install it on my MacBook Pro.  Do I have to buy a second version.

    I purchased Elements 13 for my Imac that doesn’t have a DVD drive.  How can I install it without buying a DVD drive?  I would like to also install it on my MacBook Pro.  Do I have to buy a second version?

    Download from Download Photoshop Elements products | 13, 12, 11, 10
    Install then enter your serial number.

  • How can I get computer to use external DVD drive?I have a HP dvd640 plug in play drive I want to ude but my iMac dosen't see it as connected.

    How can I get *computer* to use external DVD drive? (1.8 GHz PowerPC G5 Version 10.3.9)

    Place cd/dvd in drive.  cd/dvd icon will show on desktop.
    How can I get computer to use external DVD drive?I have a HP dvd640 plug in play drive I want to ude but my iMac dosen't see it as connected.
    What is ude?
    How is it connected?  firewire or usb?
    When connected it should appear in system profiler.
    blue apple > about this mac > more info button. Click on the hardware line. It has a little triangle in front of the work hardware.
    look for firewire or usb.
    Robert

  • How can I get Maverisks to recognize internal DVD drive?

    The latest macOS, Maverisks, usually does not recognize a DVD disk that is inserted in the internal DVD drive. Is there way to solve this?

    Place cd/dvd in drive.  cd/dvd icon will show on desktop.
    How can I get computer to use external DVD drive?I have a HP dvd640 plug in play drive I want to ude but my iMac dosen't see it as connected.
    What is ude?
    How is it connected?  firewire or usb?
    When connected it should appear in system profiler.
    blue apple > about this mac > more info button. Click on the hardware line. It has a little triangle in front of the work hardware.
    look for firewire or usb.
    Robert

  • Since 2012 I have Photoshop Elements always worked without any problem, however now the language is suddenly German how can this be changed, removed the program and re-installed, not working. Program is downloaded and updated via the apple app store?

    Since 2012 I have Photoshop Elements always worked without any problem, however now the language is suddenly German how can this be changed, removed the program and re-installed, not working. Program is downloaded and updated via the apple app store?

    I've done some research on the SQLite database. Whenever Aperture hangs up (like during auto-stack or opening the filter hud) there are thousands of SQLite queries happening. These SQLite queries cause massive file I/O because the database is stored on the disk as 1kb pages. However, the OS is caching the database file; mine's only 12MB. I'm trying to track down some performance numbers for SQLite on osx but having trouble.
    It's starting to look like most of the speed problems are in the libraries that Aperture uses instead of the actual Aperture code. Of course, that doesn't completely let the developers off the hook since they choose to use them in the first place.
    Oh, and if anyone is curious, the database is completely open to queries using the command line sqlite3 tool. Here's the language reference http://www.sqlite.org/lang.html
    Hmm, just found this. Looks like someone else has been playing around in the db http://www.majid.info/mylos/stories/2005/12/01/apertureInternals.html
    Dual 1.8 G5   Mac OS X (10.4.3)   1GB RAM, Sony Artisan Monitor, Sony HC-1 HD Camera

  • Satellite P25-S520 - DVD drive is not working properly

    Fix DVD Drive or buy external drive
    My DVD drive is not working properly, in fact it may never have been working proper. Recently I tried to back up my PC to a DVD using Norton 360. Norton did not recognize the DVD was present. I then tried writing a text file to a DVD and was unsuccessful. Both DVD+R and DVD-R media were tried (Maxwell 16X).
    I could have probably lived with this however, I got a copy of Dragon NaturallySpeaking version 10 on a CD and my Toshiba would not recognize it. I tried the CD in my neighbors laptop and it was recognized.
    An attempt at updating the driver was also unsuccessful.
    I was able to rip a music CD last night so that at least is working correctly.
    Does anybody know how I can fix this? The important part is being able to load my new program.
    Searching some forums I've found that other people have had problems with the Pioneer drive. If the drive cannot be fixed I am not adverse to buying an external DVD drive. Unfortunately where I live there are no brick-and-mortar stores which sell external drives and I would prefer to avoid the hassle of getting a drive online and discovering that it does not work with my Toshiba. Can anyone suggest an external USB drive which will read and write CDs and DVDs and which is certain to be compatible with my Toshiba?
    Thank you for any help,
    Humbaba3000BC
    Satellite P25-S520
    PIONEER DVD-RW DVR-K12D
    Driver Provider: Microsoft
    Driver Date: 7/1/2001
    Driver Version: 5.1.2535.0
    Digital Signer: Microsoft Windows Publisher

    Any external USB CD/DVD drive will be compatible with your laptop.
    However you wont be able to boot of CD's (Run Recovery for example) if you use an external drive.
    So your best option would be to replace the internal drive with a Toshiba drive designed for the laptop. Call an ASP and ask for a quotation.

  • Satellite P200-1FC: CD/DVD drive will not start - error Code 10

    My Satellite P200-1FC was purchased in January 2008 and preloaded with Vista Home Premium. The DVD/CD Drive is listed in device manager as "TSST corp CDDVDW TS-L632H ATA Device".
    At first the drive worked perfectly, but has recently refused to start. Device manager now shows it with a yellow exclamation mark and it's status is given as "This device cannot start. (Code 10)".
    Clicking check for solutions produces "could not load driver software" but no solution.
    Searching similar questions in user forums suggests a use of a Microsoft Help & Support page headed "The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista".
    However this involves modifying the registry! As a relative novice I am reluctant to do this unless I can find no easier way.
    Must I bite the bullet and and enter this minefield, or is there a better way?

    >At first the drive worked perfectly, but has recently refused to start. Device manager now shows it with a yellow exclamation mark and it's status is given as "This device cannot start. (Code 10)".
    This error is definitely caused by a wrong registry entry.
    I had such error several times ago and I have solved it removing the lower and upper filters from these registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
    Here are some steps how it worked on my Windows system;
    - I removed the CD/DVD drive from the device manager
    - Then edited the registry as described above
    - Rebooted the notebook
    Im sure it will help you too.
    Bye

  • Satellite A45-S250 : How to use Recovery CD if DVD Drive is not working

    Hi all ,
    First , appologize for my english , i'm a french guy :)
    So my problem is that i would like to re-install everything on a A45-S250 by using the recovery CD.
    But the main problem is that the internal DVD drive is not running anymore.
    I've try by plugging an external DVD drive, but the laptop don't want to boot on it.
    I've seen that it can boot through a floppy drive, lan, or SD card. But with theses possibilities , how to be able to reinstall everything include in the recovery CD ?
    I may have a usb floppy drive, so i'll be able to boot on a disk boot. but then how to start the recovery CD procedure ?
    I'll prefer to use the recovery CD as a WinXP home standart, cause i know that the OEM serial won't work to a Original version of WinXP ...
    Thanks for your help !
    Kubs

    Hi
    If you want to use the Recovery CD then you would need a bootable CD/DVD drive.
    Fact is that you would be not able to boot from a USB CD/DVD drive or its not possible to copy the whole stuff on the SD card and then to boot
    You need an internal CD/DVD drive or external CD/DVD drive which could be connected to the PCMCIA port
    For me only these two possibilities could work!

  • What can I do if my CD or DVD drive doesn't work properly in Windows 8?

    QuestionWhat can I do when if my laptop CD or DVD drive doesn't work properly in Windows 8?
    AnswerNote: For help with this issue in Windows 7, please see this article.
    To get your CD or DVD drive working correctly, try these suggestions in the order listed.
    Reinstall the Driver
    Hold the Windows key and press the 'x' key to open a menu in the lower-left. In this menu, select "Device Manager." Expand "DVD/CD-ROM drives." Right-click the entry for the CD/DVD drive nested under "DVD/CD-ROM drives," then select "Uninstall." Finally, restart the computer. The computer will reinstall the drivers for the drive.
    Power Cycle
    Even when your laptop is off and unplugged, residual power can still be held in some components. While this is normal, clearing it can help with some hardware problems. Perform these steps to complete what’s called a power cycle.
    Ensure the laptop is turned off.
    Unplug the laptop's AC power cable.
    Unplug all wires and peripherals. This includes CDs, DVDs, USB sticks, mice, printers, and any other accessories.
    Remove the battery (if the model has a removable battery). If the model does not have a removable battery, check your user's guide to determine if you have a pinhole reset on the bottom. If you do, press this.
    Hold down the power button for thirty seconds.
    Reattach the battery if removed.
    Connect the AC adaptor to the power socket that was confirmed to be working in the first step.
    Connect the other end of the AC adaptor to your computer.
    Start the computer and test the drive
    Microsoft Fix-it
    Your computer may exhibit one or more of the following symptoms:
    Your CD or DVD drive no longer appears in Windows
    Your CD or DVD drive does not read or write and is shown as disabled
    The media in your CD or DVD drive cannot be read
    The media cannot be written to a CD or DVD inserted into the drive
    You receive an error message about your CD or DVD drive
    If any of these symptoms apply to your computer, use Microsoft Fix-it troubleshooter available here.
    System Restore
    Try using System Restore to restore to the most restore point from before the problem arose.
    How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
    System Recovery
    If the System Restore doesn't solve the issue, you could try a System Reset. Resetting your laptop to its original, out-of-the-box state is a great way to eliminate software as a possible cause of the problem. Note that doing a system reset will return the laptop to its default conditions, completely wiping your data. Information on how to perform a system recovery can be found in your user's guide.
    For more information on performing a recovery, see the following article:
    How To: Understanding System Restore, Refresh, Reset, and, Recovery options in Windows 8 + Video
    Contact Customer Support
    If the drive doesn't work after performing a recovery, it may be due to hardware failure. Please call customer support or seek servicing.

    See this Microsoft article - http://support.microsoft.com/kb/314060/en-us  For ways to fix manually
    and/or use the proper microsoft fixit 8.1 and 8 or the other one for Windows 7, Vista, and XP listed below.
    (these are from the Microsoft article)
    Resolution 2: Use the CD/DVD Fix it troubleshooter
    To automatically fix common issues with CD or DVD drives, click Run now, and then follow the on-screen instructions. Windows 8.1 and Windows 8   
    The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                    This troubleshooter fixes many problems. learn more
    Run now
    Windows 7, Windows Vista and Windows XP
    The Automatically diagnose and fix common problems with CD or DVD drives troubleshooter may automatically fix the problem described in this article.
                                    This troubleshooter fixes many problems. learn more
    Run now
    If your problem is not solved, try the next
    S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

  • DVD drive is not working on Satellite A series

    This is the second time my dvd drive hasn't worked
    it's coming up as theres a problem with code 39 what do i do!
    I started following someone else advice when you delete the
    drive and then reboot notebook but i don't know how
    to reboot notebook because I don't know what it is!
    Can someone please help me I need to use the DVD drive!
    I have already deleted the drive so what do I do now!
    Please help?!
    Thank You
    Rhian
    x

    hi...
    this is my 1st post here..so i really have no idea whether or not my problem has been discussed and I am not sure either whether I am having the same problem as the author
    lately but when I am trying to burn aD DVD, I keep getting error message in the middle of the process.
    The burning process was terminated immediately and I was asked to insert a new dvd to retry.
    But then, I received the same error. The weird thing is occasionaly that I was able to complete the process.
    I am pretty sure that the problem is not because of the dvd I used because as I said, sometimes I was a able to finish it.
    Unfortunately, I cannot recall what is the exact error message..but i hope this details help.

  • Installing Windows XP on Satellite A10 without CD/DVD drive

    I want to reinstall windows xp on a Toshiba A10 and the CD Rom is dead ...
    I've tryed to reinstall it from a bootable usb stick but i can't make it to boot from it.
    I was thinking about that LAN boot thing.
    Can I install windows from a lan pc and if a i can, can someone explain how or give me a tutorial or something?
    How can i install windows from the usb stick?
    Please help me i really need this to work.

    Hi
    It seems that the BIOS does not support booting from the USB flash drive.
    The booting from LAN is possible but if you want to boot from LAN then you will need an RIS Server.
    Here is a Microsoft Step-by-Step Guide to Remote OS Installation
    http://technet.microsoft.com/en-us/library/bb742378.aspx
    But to be honest I would recommend other method.
    If you want to install the Win XP on the HDD then you should copy the i386 folder from the Win XP CD to HDD (you can remove the HDD from notebook and could connect it to other computer using USB controller).
    Then you should go to i386 folder which you copied to HDD and should execute the setup.exe or winnt.exe
    Both exe file should start the installation setup.
    Greets

  • How can I save a jpeg? Cntrl-click on does not work as it did in version 2

    In Firefox 2 I could hold down the Control key and click on an image to open a window with a "Save as" choice. Then I could name the image and chose a location to save it to. In Firefox 3, the window opens as before but the "Save as" choice does nothing. So how can I save website images as jpegs in a specified location such as a folder on my hard drive or on a memory stick?

    Hi ddt333,
    Base on my test again, I found that if the value of relative position is less than 1, it will uses the absolute position, you could change its position to relative position with the value less than 1 (e.g. 0), after save and re-check its position, you will
    find that it still uses absolute position. By default it uses the absolute position, so when we add the new textbox to the document, its position is at left-top of document (left=0, top=0).
    The RelativeHorizontalPostion property is used to specify its
    relative to type (e.g. page, marging)
    There are LeftRelative and TopRelative properties of shape, so please specify these properties’ value, then change
    relative to type of shape.
    Regards
    Starain
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • HT1430 How can you restart your iphone if your lock button does not work?

    How can you restart or turn off your iPhone if the lock button does not work?

    The best way is to let the battery die. Or you can reset the phone settings which restarts everything.

Maybe you are looking for

  • Issue between PO and Sales order

    we are having a serious performance issue in one certain circumstance. we have a sales order with 1800 items on it. of these 1800 items, 21 have generated a third party PO, for the goods to be shipped directly to the customer from the supplier. When

  • IPhone 5 dead after updating to iOS 8.0.2

    After updating from 7.1.2 to 8.0.2, my iPhone 5 cannot charge and is not recognized by my Mac.  All original cables.   After 24 hours, the battery is dead, so there is no way to even find a solution by restoring or anything.  It is a brick.  If I wer

  • [QUESTION] File CONOTRL.SQL is not being created!!

    Dear experts, I am doing a Java refresh from our production to our development system. I have first restored the oracle 11 database. As it is NetWeaver 7.3 EHP1, it should be possible to do a refresh or system copy using the backup/restore method, wh

  • Will this setup work?

    Hi everyone, I am looking into purchasing an AirPort Express 2nd Gen from the apple store. I have a few questions for you guys... I am planning on keeping my existing router(Netgear N600 wireless router) in place, and have my printer connected wirele

  • Help with photos lost

    My daughter just sync he'd iPhone to iTunes on MacBook and lost all iPhone photos. Can I retrieve them. She did not photo stream them