How can i get a power bar code i only have a ee mobile wifi

How can i get a power bar code i only have a ee mobile wifi which doesnt allow me to sent texts .. ive tried the sim card in a unlocked phone but it wont send texts

You could try putting your SIM into an EE phone. It's only a SIM, it should be be able to send an SMS.

Similar Messages

How can I get rid of the text and only have icons in the bookmarkfield?

Earlier the bookmarkfied only showed icons but after the upgrade they show icons and text. How can I get back to only icons so I can have the good old overwiw back?

umparrothead wrote:
Test this by going to that folder with both in it and click View/Show View Options. In there, de-check "Show icon preview", and you should see the bordered icons go to default file type icons and the unframed ones remain the same. I honestly don't know how to re-embed the image in the icon data, as it does not play well with the typical paste in on Get Info. Hope this gets a solution rolling, because it's something that's bothered me as well.
Thanks umparrothead. Yeah, I see what you're saying. The copy and paste into the "get info," is buggy, but it does actually work. I have noticed this when trying to change the icon on an .avi file. The copy paste in "get info," initially shows the paste, but it's not reflected immediately in the files icon in the finder window. I have gotten it to show up as the files icon by moving the file to another folder, (in list view), and then... opening then and closing the folder.
See here the border on the one file is gone!!
This opening and closing does not work in the folder the file is in. It only works after moving it to another folder and then opening and closing?!? I think it has something to do with quickview trying to over-ride our choice of icon for it's own choice, whether it be a poster frame on a movie file, or in this case it's own "bordered" view of the photo inside. I imagine it might also show up after a restart, but that is surely far more extreme than the dreaded move file/open folder/close folder/open folder/move file back, trick. uuugghhh...
This copy paste thing is no solution to be sure. But it does work. I just wish there were some kind of script so I can run it on hundreds of photos at a time...
Any one else out there with any ideas?!?

How can I get the Serial No. if I only have the IMEI??

My friend bought an iPhone 4s and it has been stolen form his car,,
He has the bill with his name and IMEI only, so how can he get the serial number
to register the product in his Support profile??
try tracking his iPhone with help of Apple if possible

Alternatively, if he ever synched the iPhone to his computer, he can launch iTunes, go to the Preferences, select Devices, and hover the cursor over the backup file for the iPhone. That should show him the serial number.
Regards.

How can I get a search bar added to my email archives screen to make it easier to search for the right archives folder, Samsung has one so I was surprised to see that I have to scroll up and down to find the right folder?

How can I get a search bar added to my email archives screen to make it easier to search for the right archives folder, Samsung has one so I was surprised to see that I have to scroll up and down to find the right folder?

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
You can modify the pref <b>keyword.URL</b> on the <b>about:config</b> page to use Google's "I'm Feeling Lucky" or Google's "Browse By Name".
* Google "I'm Feeling Lucky": http://www.google.com/search?btnI=I%27m+Feeling+Lucky&ie=UTF-8&oe=UTF-8&q=
* Google "Browse by Name": http://www.google.com/search?ie=UTF-8&sourceid=navclient&gfns=1&q=
* http://kb.mozillazine.org/keyword.URL
* http://kb.mozillazine.org/Location_Bar_search

How can I get a search bar added when trying to archieve emails in my IPhone's email app?

My IPhone email app is connected to my Outlook email system in which I have many archieved folders, when I want to place an email in my archieved folders on my IPhone I have to scroll a long list of archieved folders to find the right one, how can I get a search bar added to find it easier? My colleague' s Samsung has that function already and can't believe that Apple can be behind Samsung on this.

You probably will not be able to get a refund. The iTunes Store makes it pretty clear that gifts are redeemable only in the same country, and the terms of sale say that all sales are final. But you can contact the iTunes Store and ask:
http://www.apple.com/support/itunes/contact.html
For future reference, you will not get responses from Apple to any question you ask in these forums. We're all just fellow users here. And you posted in a forum for questions about the Communities themselves. You usually will get the quickest and most applicable answers if you ask in the forum dedicated to the product or service about which you are asking.
Regards.

How can i get the footer bar to stay, whilst page scrolls?

how can i get the footer bar to stay, whilst page scrolls?
at the moment, on my site, if the page is longer than the screen, it goes behind the footer,
but the foot bar moves up the page as yo scroll down to see the rest of the content.
any way of getting the footer to stay put, while body/page contant scrolls ?
thanks

You can use some css to do it...
#footer_id {
position:fixed;
bottom:0px;
<div id="footer_id">Your footer content</div>
The css above will lock your footer to the bottome of the browser window. As long as your footer <div> is last in your html, it will float over the top of everything on your page when the page is scrolled. If it's not last in the html, you'll need to add a z-index to get it on top of your other content in the stack.

I have paid for ipages 09 on 15/05 but never succed to enter the serial code. After 45 days, altough I was charged by 20 chf, I cannot completely use all ipages tools(impossible to save ). How can I get again the serial code I paid for?

i have paid for ipages 09 on 15/05 but never succed to enter the serial code. After 45 days, altough I was charged by 20 chf, I cannot completely use all ipages tools(impossible to save ). How can I get again the serial code I paid for?

Getting the request for a serial number means that at some time you had the iWork ’09 trial installed. You need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user. The easiest way to fix the problem is to use Yvan Koenig's AppleScript that removes the files. You can find it on his box.com account in for_iWork'09 > other_iWork'09 items > uninstall iWork '09.zip. Download uninstall iWork '09.zip, decompress it, open it in AppleScript Editor and click the Run button.
Apple's support article on the subject says it's due to having a copy of the trial that is a higher version that the one you've purchased, but I'm not sure that is very common. This problem started with Snow Leopard & it seems to be some code in the iWork installers that doesn't do what it should.

HT201304 How can I get my restrictions pass code without doing a factory restore?

How can I get my restrictions pass code without doing a factory restore?

You cannot:
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
A
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
7. iOS - Unable to update or restore
Forgotten Restrictions Passcode Help
iPad,iPod,iPod Touch Recovery Mode
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
You can restore from a backup if you have one from BEFORE you set the restrictions passcode.
Also, see iTunes- Restoring iOS software.

How can I get the XSLT source code?

How can I get the XSLT source code?

Actually, I want to parse customer reviews for academic purpose.
I'm trying to follow the links in the customer reviews zone.
For example:
In the following page
http://www.amazon.com/gp/product/customer-reviews/B000LU8A7E/sr=1-1/qid=1180473311/ref=cm_cr_dp_all_helpful/102-2890495-8864146?ie=UTF8&n=1065836&qid=1180473311&sr=1-1#customerReviews
in the "customer reviews" section, there is a link "next" that gets the next 10 reviews.
The thing is that I don't know how to imitate its action using java and actually, I'm not sure if it is possible to do that using software.
I tried to look at the source code that I got using the previous java code I posted and I see that the next link always has the following href attributes "http://www.amazon.com/gp/product/customer-reviews/B000LU8A7E"
I tried to see if there is any javascript that tells the page which 10 reviews to get but with no success.
So if anyone knows how to imitate the next link action using software that will sure help me a lot.
Thanks in advance

My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

How can I get rid of old books that I have deleted from my device? It still shows up as purchased books on "Icloud".

How can I get rid of old books that I have deleted from my device but still shows up as "purchased books" on "Icloud". I don't want to see some of these books at all. I can sort by one that are PDFs and ones currently on device, but it still gives option to show those old titles. Does anyone know how to erase your "Icloud" history, please?

Nooooooo! lol... If I want to download again I will, I don't want an electronic trail. Plus when I have Ibooks open, sometimes I will accidently hit the item and it will immediatly try to download it. The problem with that is that its "Time magazines Best Photos of 2012" etc and it locks up my IPAD cuz of sheer size of the book. So I would like it gone from the history. Isn't there a way to clear the history?

How can i get my contacts back if i dont have the back up

How can i get my contacts back if i dont have the back up

if you didn't back them up then you cant get them back without physically puting them back in.

I was downloading music from my partners purchased music on my phone and it wiped all my existing music, how can i get my music back as i dont have it on my computer anymore?

i was downloading music from my partners purchased music on my phone and it wiped all my existing music, how can i get my music back as i dont have it on my computer anymore? please help me

If you bought this music from iTunes you can download it again from within your Purchases in the iTunes App.
Otherwise, razmee is right. you can only sync to one itunes library. If you sync to another one whatever does not exist on the new library will get removed from the phone.
That's is by design to avoid Piracy. As otherwise you could simply transfer purchases to other users.

HT204306 How can I get my old password back after I have changed it? I cannot change it back because it has been used in the last year

how can I get my old password back after I have changed it? I cannot change it back because it has been used in the last year

HI, thanks, but I know I can set a new password. I just wanted to get my old one back cos I have used it a long time & can therefore remember it.

How can i get emojis on my keyboard ? i have a iPhone 5c

how can i get emojis on my keyboard ? I have an iPhone 5c

Go to Settings>General>Keyboard>Add Keyboard and add the emoji keyboard. Then you access that keyboard by tapping on the globe icon to the bottom left of the keyboard area and it will toggle between your standard keyboard and the emoji and you click away!

How can i get a power bar code i only have a ee mobile wifi

Similar Messages

Maybe you are looking for