How can I get elements 11 to work with 16 bits photos?

In the expert mode of Photoshop Elements 11, I can only work with 8 bits photos. How can I get Elements 11 to work with 16 bits photos?

No, you can still buy photoshop cs6 (perpetual license) if one doesn't want to subscribe to the cloud version (photoshop cc version 14)
Either way is expensive compared to photoshop elements.
http://www.adobe.com/products/cs6.html?promoid=JOLIS

Similar Messages

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

My iPod Classic is seen by Windows but not by iTunes. I have reset it, gone to disk mode and it won't show up in iTunes. There appears to be music on it in a file called MUSICSAVE. How can I get this to work with iTunes again?

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

How can i get acrobat to work with windows vista

How can I get adobeexportpdf to work with windows vista?

But if, on the other hand you do mean Acrobat, please let us know what problem you are having.

Email messages from my icloud account update on all my devices showing if they have been read and if a reply has been sent. This does not happen with my tinyworld (TalkTalk) email account. Can I (how can I) get this to work with TinyWorld?

Email messages from my icloud account update on all my devices showing if they have been read and if a reply has been sent. This does not happen with my tinyworld (TalkTalk) email account. Can I (how can I) get this to work with TinyWorld?

You have to look at the email protocol being used. the Apple email system uses IMAP, does Tinyworld use IMAP or POP?
Does the email system permit delivery receipts to be requested?
Just some of the things one needs to determine from the information provided by the email service provider.

How can I get Lion to work with label printer- Brother QL 570 or Dymo 450 Turbo?

I can't get Lion to work with label printers, either Brother QL 570 or Dymo Turbo 450. I want to uninstall Lion and use Snow Leopard unless there is a way to make Lion work with these devices. Any ideas?

Dymo has released new drivers since Lion came out. Have you downloaded and
installed them from the Dymo website?
Some people have said that their Dymo label printers were set to off line by Lion, but
worked fine after going to Print & Scan, selecting the Dymo printer, and making sure
it was active/on-line. I had to do that with my Dymo 450 Label Writer.
I cannot offer any tips about Brother, but you may wish to check their website
for latest drivers.

I am college student and my professors require we use Turnitin however Turnitin does not support Firefox 4 how can I get it to work with Firefox 4 or how can I return to Firefox 3

Turnitin will not work with firefox 4 how can I return to firefox 3 or how can I get firefox 4 and Turnitin in sync

The Turnitin system requirements on mention Firefox 3. If it does not support Firefox 4 you can downgrade to Firefox 3.6
To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

Bought by a game on the apple store for an ipad but it has now frozen how can I get it to work with out paying again?

Game through the apple store has now frozen on my ipad. How do I get it to work again?

Hi there,
You may want to take a look at the troubleshooting steps found in the article below.
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/TS1702
-Griff W.

How can I get Recipefox to work with the latest version (16) of Firefox?

Recipefox worked on previous versions of Firefox. I could use the Grab It feature on many sites & easily retrieve recipes. Now, with the latest version of Firefox, it does not work on any of the recipe websites. Is there a more recent version of Recipefox that works with Firefox version 16, I am using 0.68. Does Recipefox get updated with newer versions of Firefox.

Hi,
You can try to right-click and '''Find Updates''' via '''Tools''' ('''Alt''' + '''T''') > '''Add-ons''' > '''Extensions'''. You can also '''Remove''' it, and search and install via the Search box on the top right or from [https://addons.mozilla.org/en-US/ AMO].
[https://support.mozilla.org/en-US/kb/Using%20extensions%20with%20Firefox Using Extensions]
If problems persist you can reset Firefox and start afresh with [https://addons.mozilla.org/en-US/firefox/addon/recipefox/?src=search recipefox].
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

How can I get MagicTrackpad to work with Boot Camp and Windows Vista?

Just installed Lion and then installed Magic Trackpad. Now I need to know how to get the Magic Tackpad to work with Windows Vista in my Boot Camp partition. Windows Bluetooth recognizes the Magic Trackpad but it says the device won't confirm the passkey. No passkey came with the Magic Trackpad and the option to not use a passkey still doesn't achieve connection with Windows. Suggestions/ comments, please.
TIA,
Picman

UPDATE
Just completed several lengthy sessions with Apple Tech Support (escalated to excellent Sr. Advisor). Bottom line is that there seems to be no answer to the problem of the Magic Trackpad not being able to maintain its pairing/connection with Windows (Vista in my case) or OS X (10.7 in my case) when switching Boot Camp partitions. In fact, when trying to re-pair it is necessary to remove the MTP batteries first. To pair at all with Windows requires the use of the Bluetooth passkey "0000" (not provided in MTP documentation). This achieves limited MTP/Windows functionality (cursor and "click" control only - with BC 3.1. BC 3.2 is supposed to provide more gestures, but I have not gotten there yet). Appears that when switching back to OS X, that passkey has remained with the MTP and is not what OS X is looking for, so it fails the connection. Removing/replacing the batteries probably dumps the passkey and allows the OS X connection. The Sr. Advisor says he sees this issue often (including with Windows 7) in their internal chat rooms, but no solution. He will be referring it to the engineers and will let me know the outcome. Meantime, assuming I keep the MTP, I'll have to resign myself to using a wired mouse when going to Windows (not a huge inconvenience, since it's only for Quicken; but the issue is worse than "in-elegant" for Apple!
I am satisfied that I have obtained the best possible help from Apple on this issue. If anybody has more, please reply.
Thanks,
picman

How can I get dashlane to work with firefox

i have added the extension but can not get a response from dashlane.

I don't use Dashlane myself... Does their support article help?
http://support.dashlane.com/customer/portal/articles/390903-how-to-verify-the-firefox-extension

How can I get Airplay to work with my 3TB Time Capsule and my two AV receivers

I have researched the net to death and my only solace is I don't appear to be alone. I have a 3TB Time Capsule that has a Denon and Pioneer receiver attached to it by ethernet. Also connected to the time capsule our three apple TV's. I can use airplay with my iPhones and iPads to the Apple TV but can't get either the Denon or the Pioneer to show up as Air Play options on any IOS Devices or my two Mac's.
I have the latest firmware on the Denon and Pioneer, the latest firmware on the Time Capsule and Mac's. I have tried power cycling, inserting a switch between the receivers and the time capsule but to no avail.
Any suggestions would be greatly

You can't officially as it relies on hardware.
A potential software solution is Airparrot.
http://airparrot.com
AC

How can i get javascript to work with version 18 - all boxes ticked but still problem

I have WINDOWS 8 (for 2 weeks) , Firefox v18. I try to use a banking site that demands javascript but when I try to use the site, I get "javascript not working (or available).
If I go into Youtube , any video I pick fails to run - instead I get flashing video screen
I have set Javascript enabled but no difference.
can anyone point me in right direction .
I have reloaded Firefox and reset it - problem still exists

hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

How can I get paypal to work with itunes?

I am having a problem with Paypal in general. I was thrilled when I saw that Paypal was a choice. So, I choose it for a payment option, verified all information and set up my preapproved payment account. For awhile everything was great. I bought music and podcasts with no problem. Then after trying to buy a song one day I was given a message that my account information has changed. I updated all my information (which I never changed in the first place) and that's when the problems started. I verifed all information with Paypal as well but when I click "Return to Merchant", I am directed to the apple website's itunes download page. I have already downloaded the latest version of itunes thinking MAYBE I needed to update. But still, no verification on the side of itunes that my account is active. Everytime I try to buy a song I am directed back to the page in itunes that I need to verify my paypal account. My account is active in paypal, but still I can't buy songs. I have verified my account information, I don't know how many times now in the past few days. I have emailed Apple support with my problem and have heard nothing back from them. I have been doing searches in discussions and have seen that paypal may not be the best choice for payment per so many problems customers are having. I feel I have no choice but to switch to a credit card if I want to buy anything in itunes. I think that if you offer a choice like paypal then it should be crediable. Apple really needs to take this choice away or fix it, and stop misleading customers into problems like this. It is really fustrating.
Oh yeah, once I actually got into my account information and re-entered all my info (once again!?) and then I am given an error message "Form not complete....enter country". This confuses me to NO END. My country (USA) is clearly stated in the form. I mean, you have no way to change it, it's already there! ?*&#@! So, I click "Done" but itunes will not accept it. I get the same "enter country" error over and over. I have changed browsers(from IE to Mozilla and back again) and tried countless advice I have found while searching in Discussions to no avail. I have updated my information until my fingers are sore. I have verified my paypal account so many time that my email is full of confirmations from Paypal. I cannot understand why this is happening or how to fix it. Any advice would be appreciated.
Thanks!

1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
3. Check the USB cable
4 Verify that Apple Mobile Device Support is installed
5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
7. Check for third-party software conflicts.
<Link Edited By Host>

How can I get Flash to work with my N-trig stylus on my Surface Pro 3?

Flash doesn't work at all with the N-trig stylus on the Surface Pro 3 with the latest WinTab drivers installed. The only freehand marks I can make create large useless lines that extend way beyond the lower-right corner the stage. Is Adobe aware of this?

Many people (including me) are also having the same issue. There are several other threads about this too on adobe and Microsoft websites. Some people are even having this issue with tasblets other thsn the surface pro 3, and this is COMPLETELY UNACCEPTABLE BECAUSE WE ARE PAYING MONTHLY FOR A PROGRAM THAT IS RENDERED USELESS BY THIS BUG!! I mean in almost every thread an adobe representative says the problem has been fixed internally and will be resolved with the next update, BUT WHEN IS THAT!!?? I mean if they are gonna sit here and have issues like this, they need to update them NOW not later, as we are paying EVERY MONTH and get updates like every 4-6 months. So instead of getting frequent minor and small updates to address things like this, they decide to leave us paying for a broken program for months until they're ready to release big update which will probably come with more bugs that we'll have to wait forever to get fixed all over again,
but LONG STORY SHORT:according to many adobe reps "the issue has been fixed internally and will be resolved with the next update"

How can I get CUDA to Work with a GTX560 Ti in CC 2014

One of my editing computers uses a GTX560 Ti card. In previous version of Premiere I was able to edit the "cuda_supported_cards.txt" file and my GTX560 Ti to the list. I then noticed a boost to render times and overall performance. With the latest version of Premiere Pro, the "cuda_supported_cards.txt" file isn't there anymore and Premiere tells me I am unable to use hardware acceleration with the Mercury Playback Engine. Is there a way with the latest version of Premiere CC to get my card to be recognized again?
Thanks.

I had updated my video card driver fairly recently and I use the GeForce Experience to keep up-to-date, but when I looked I didn't have the latest driver. After installing it, the GPU acceleration is now working. Thanks!

How can I get this to work with NAT?

Hi Masters,
I need to add a route-map to a static NAT but the option seems to be available only if using inside/outside NAT, not if using enable NAT.
This is a CISCO1921/K9 running 15.2(4)M6
Here's what I mean:
R2(config)#ip nat inside source static 192.168.3.20 10.10.10.20 ? --> allows the route-map option to be appended
extendable Extend this translation when used
mapping-id Associate a mapping id to this mapping
no-alias Do not create an alias for the global address
no-payload No translation of embedded address/port in the payload
redundancy NAT redundancy operation
route-map Specify route-map
vrf Specify vrf
<cr>
R2(config)#ip nat source static 192.168.3.20 10.10.10.20 ? --> no route-map option
extendable Extend this translation when used
no-alias Do not create an alias for the global address
no-payload No translation of embedded address/port in the payload
vrf Specify vrf
<cr>
What I need is multiple dynamic and static NAT rules between multiple interfaces, so I need a way to assign multiple static NAT depending on the destination.
For example, if server 192.168.3.0 wants to go to VLAN A, get statically translated to IP 1.
If the same server 192.168.3.0 wants to go to VLAN B, get statically translated to IP 2.
AS far as I know I need a route-map attached to the static NAT statements to make this happen, but the option is not available as shown above. And I don't want to use normal inside/outside NAT since I need the interfaces to allow NAT in both directions.
If anybody can share some light will be very appreciated!

Paul,
The commands:
ip nat source list or ip nat source route-map works fine for dynamic NAT or PAT, but I need static NAT.
And the Static PAT statements won’t work since we need all ports defined.
So, I guess I need a way to map static NAT depending on the destination using domain-less NAT.
Can this be accomplished?

How can I get elements 11 to work with 16 bits photos?

Similar Messages

Maybe you are looking for