How can I get Lion to recognize my boot camp partition.

Yesterday morning I found my mac suffered from a b-tree failure and was unable to access OS X 10.6. I ended up booting into my Boot camp partition of Windows XP and backed it up then reinstalled Snow leopard. Then I upgraded to Lion, saw it fail due to a partitioning issue, created a 2gb partition called Mac HD 2 (by shrinking mac hd), saw i could install but not full install. So I created another partition and installed Lion successfully. Got into Lion and shrunk my 2x 2GB partitions into one 4GB partition. My Windows XP hard drive boot camp partition was still on my desktop. I can access all the files but I can not boot into it. When I hold down the option key there is only Mac HD or Recovery partition.
Is there any way to get the boot camp partition to work?
I did notice that when I was looking through the settings I could choose which HD was the default boot option. Mac hd with 10.7 and a folder called Windows XP were both available.

We also cannot get Robohelp to recognize our FrameMaker installation.
We are using Robohelp 9 and Framemaker 11.
We are in the process of moving all of our Robohelp content to Framemaker, but our project team still needs CHM files for the next release or so. So we figured we could move our content to Frame 11, then import the Frame content into Robohelp when we needed to generate the CHM files.
The process works great when we use RH 10 and Frame 11, but we get the following error when we use RH 9:
"This operation cannot be completed without FrameMaker. Install FrameMaker and try again."
I have uninstalled and reinstalled Frame 11 and RH 9, but am still getting the same error. Buying a set of new Robohelp 10 licenses probably isn't an option.
Any other suggestions?
Thanks,
Sue

Similar Messages

How can I get MagicTrackpad to work with Boot Camp and Windows Vista?

Just installed Lion and then installed Magic Trackpad. Now I need to know how to get the Magic Tackpad to work with Windows Vista in my Boot Camp partition. Windows Bluetooth recognizes the Magic Trackpad but it says the device won't confirm the passkey. No passkey came with the Magic Trackpad and the option to not use a passkey still doesn't achieve connection with Windows. Suggestions/ comments, please.
TIA,
Picman

UPDATE
Just completed several lengthy sessions with Apple Tech Support (escalated to excellent Sr. Advisor). Bottom line is that there seems to be no answer to the problem of the Magic Trackpad not being able to maintain its pairing/connection with Windows (Vista in my case) or OS X (10.7 in my case) when switching Boot Camp partitions. In fact, when trying to re-pair it is necessary to remove the MTP batteries first. To pair at all with Windows requires the use of the Bluetooth passkey "0000" (not provided in MTP documentation). This achieves limited MTP/Windows functionality (cursor and "click" control only - with BC 3.1. BC 3.2 is supposed to provide more gestures, but I have not gotten there yet). Appears that when switching back to OS X, that passkey has remained with the MTP and is not what OS X is looking for, so it fails the connection. Removing/replacing the batteries probably dumps the passkey and allows the OS X connection. The Sr. Advisor says he sees this issue often (including with Windows 7) in their internal chat rooms, but no solution. He will be referring it to the engineers and will let me know the outcome. Meantime, assuming I keep the MTP, I'll have to resign myself to using a wired mouse when going to Windows (not a huge inconvenience, since it's only for Quicken; but the issue is worse than "in-elegant" for Apple!
I am satisfied that I have obtained the best possible help from Apple on this issue. If anybody has more, please reply.
Thanks,
picman

I have new 2T iomega external HD (Mac Companion) - my Mac (2.8 GHz i7 - Lion OS) will not recognize HD if hooked up with Firewire, but it does recognize if hooked up via USB - how can I get it to recognize with Firewire?

I have new 2T iomega external HD (Mac Companion) - my Mac (2.8 GHz i7 - Lion OS) will not recognize HD if hooked up with Firewire, but it does recognize if hooked up via USB - how can I get it to recognize with Firewire?

Try a different FW800 cable and also try doing a SMC reset. If neither work try another FW800 device to see if it's recognized, if it is then you know it's not the Mac it's probably the EHD.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Wait 15 seconds.
Attach the computers power cable.
Wait another 5 seconds and press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

How can I get iTunes to recognize the apps that are missing from the library screen but still on the machine??

My apps are not showing-up in the iTunes library but they are present in the apps folder. How can I get iTunes to recognize their presence?
Library-Apps-All (only three of several hundred appear).
Apps are still present in Users-Music-Mobile Applications
I am running iTunes 11.0, OS X 10.8.2 on a Mac Pro.
Ran Disk Utility, Techtool, Disk Warrior and then reinstalled Mountain Lion, updated it and repaired permissions. No change.
There is a file that says 'iTunes Library (damaged), which is the iTunes Database file. How can that file be re-created?
Any technical help on replacing that file with a new, fresh one would be appreciated!

It has always been very basic to maintain a backup of media and other important files. If you chose to reinstall the OS without having a backup, well that just is not smart.
If you are in the US and running iTunes 10.3 or later, iTunes purchases can be redownloaded via iCloud. Simply log into the iTunes store, select purchases, purchase history and redownload the content.
If you are not in the US.... well, seems you just learned and important and possibly expensive lesson.

Bridge wont recognizw my Nikon d610. I am running windows 8 and photoshop cs6 with 8.6 camera raw plug in. How can I get bridge to recognize my camera? Thanks to anyone who can help!!

Bridge wont recognizw my Nikon d610. I am running windows 8 and photoshop cs6 with 8.6 camera raw plug in. How can I get bridge to recognize my camera? Thanks!!

That camera model has been supported since ACR 8.3 and it is most certainly supported by ACR 8.6 and ACR 8.7 (beta).
Either you have damaged, corrupt image files, or a faulty Photoshop and/or ACR installation.
If there are no privacy issues, you can post one of your files to the FTP service of your choice (such as Dropbox or yousendit.com), post the link to it, and someone here can take a look at it for you.

How can I get RoboHelp to recognize my FrameMaker installation?

I have Technical Suite 3.5 installed and several RoboHelp projects linked to FrameMaker books.
The Frame books were created in FrameMaker 10. I then upgraded to Technical Suite 3.5, then later upgraded my FrameMaker to 11.
All was well, RoboHelp continued to update from the Frame book files.
Then last week my hard disk crashed. IT provided a new disk, installed the Technical Suite and FrameMaker 11, but now when I open the RoboHelp projects and try to update them, RoboHelp displays an error message that says "Adobe FrameMaker 10 is not installed. No FrameMaker documents can be updated."
When I try to relink the project to FrameMaker (File | Link), I get a similar message: "This operation cannot be completed without FrameMaker 10. Install FrameMaker 10 and try again."
How can I get RoboHelp to recognize my FrameMaker 11 installation, which it used to do prior to the crash and reinstallation?
Thanks.
Jerry

We also cannot get Robohelp to recognize our FrameMaker installation.
We are using Robohelp 9 and Framemaker 11.
We are in the process of moving all of our Robohelp content to Framemaker, but our project team still needs CHM files for the next release or so. So we figured we could move our content to Frame 11, then import the Frame content into Robohelp when we needed to generate the CHM files.
The process works great when we use RH 10 and Frame 11, but we get the following error when we use RH 9:
"This operation cannot be completed without FrameMaker. Install FrameMaker and try again."
I have uninstalled and reinstalled Frame 11 and RH 9, but am still getting the same error. Buying a set of new Robohelp 10 licenses probably isn't an option.
Any other suggestions?
Thanks,
Sue

How can I get iMovie to recognize the external camera?

iMAC running OSX 10.6.8 recognizes external HD Camera hardware, but iMovie fails to recognize the device. I can copy files "manually" using Finder, but cannot import them directly into iMovie. How can I get iMovie to recognize the camera? I have already re-booted all devices and tried multiple USB ports. In all cases the OS recognizes the camera, but iMovie does not.

OK This camcorder is a fine camcorder. I have an earlier model of a similar camcorder from Panasonic. However, this newer model has one problem. It is not compatible with iMovie if you shoot at the highest quality mode, (which is 60P or 50P - which might be called 28MBPS mode). If you shoot 30P or 30i (even 60i) it will import to iMovie. Also, iMovie can handle 1280x720P60 and P50.
It will definitely work on iMovie 11. It should probably work on iMovie 09. I doubt this camera will be recognized at all on iMovie 08, but it is worth a try. To see which iMovie you have, click iMovie/About and check the version. 9.04 would be iMovie 11. (9.08 is the current version, but it will not run on OSX 10.6.8). 8.06 would be iMovie 09. 7.1.4 would be iMovie 08.
OK So how to work around this limitation?
1) If you have Final Cut Pro X ($300) or can justify buying it, it will import 60P and 50P from this camera. However, if this seems a little pricey to you, keep reading.
2) If you set your camera to record in 1080P30 and shoot a short clip, then iMovie should see the camera. Then I would suggest using iMovie import screen to create a CAMERA ARCHIVE of your camera. This will copy to your Mac the entire contents of the video files on your camera. You will need them later. I am assuming you have some valuable footage on the camera that you would like to have.
3) Going forward, the simplest thing is to shoot in 1920x1080P30 and use iMovie normally. The biggest advantage of P60 or P50 is when you need really high quality slow motion effects. In other words, after you edit your movie, everything is converted to P30 or P25 anyway.
4) If you want to retrieve the 1080P50 or 1080P60 clips that you have shot, then there are a couple of apps you can buy to convert them to a form that iMovie can edit. Two such apps are ClipWrap and Voltaic HD. There are also various free apps, but I cannot vouch for them. Do a search on google and you may find some that work.

How can i get itunes to recognize my iphone so i can download it and then download that into my new iphone4s???

how can i get itunes to recognize my iphone (the first one) so i can download its info so i can then download that into my new iphone 4s.???

Including going through all of Step 5? That can take some time, and should fix the problem. You have also removed and reinstalled iTunes following the steps in this support document? http://support.apple.com/kb/HT1923 As a last resort, see this support document. http://support.apple.com/kb/TS5376

Is there a fix for the WIFI problem with Lion? How can I get Lion off of my Mac?

Is there a fix for the WIFI problem with Lion? How can I get Lion off of my Mac?

gmiller0 wrote:
My mac has 10.7.3 and will not connect to wifi after it wakes up. Have contacted AppleCare but the problem cannot seem to be resolved.. I guess this is a major issue with Lion:(
What model of Mac? I have a MBP running 10.7.3 and do not have that issue. From the other couple of posts I've seen about it, it seems to be maybe an issue with some iMacs? Have your tried searching the Lion or iMac forums for similar issues, just to see if anyone has hit on why it is happening?

How can I get iMac to recognize Canon Pixma mp990 printer wirelessly?

Although my Canon Pixma MP990 printer/scanner shows I've properly set it up for wifi, and the blue wifi light illuminates on the printer, my iMac now refuses to recognize that my printer is connected. Imac now shows the printer as offline. When the printer was set up for corded/wired connection, the Imac worked fine with it. How can I get iMac to recognize the wireless printer setup? Thanks!

Hi ..
Click here > Canon U.S.A. : Support & Drivers : PIXMA MP990
Then click Wireless Help
Make sure the printer is recognized in System Preferences > Print & Scan > Print
If not, download and install the drivers designated for the mp990 model.
In the System Preferences > Print & Scan > Print window, click + (plus) to add the printer.

How can I get Skype to recognize camera on MacBook Air?

How can I get Skype to recognize the camera on my MacBook Air? It recognized it until last week. (Is Apple working 24/7 to fix this irritating problem?)

See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
From Apple:
MacBook Air (Mid 2013): FaceTime HD Camera might not work after OS X 10.8.5 update
update resolution coming soon

My I phone 3GS keeps saying no sim. How can I get it to recognize the SIM card?

My iPhone keeps saying No SIM. How can I get it to recognize the SIM card?

TRy removing the sim card wipe it clean then insert it again. Your sim card tray might be dusty. Another option is turning your airplane mode on and off.
btw, is your network signal strong in the area where you are currently? Ask ATT if there is any area outage

I ran out of space on my icloud so my phone could no longer back up. I have now deleted lots from my phone, how can I get icloud to recognize this so it will complete a back up?

I ran out of space on my icloud so my phone could no longer back up. I have now deleted lots from my phone, how can I get icloud to recognize this so it will complete a back up.

A. Have you gone in to 'manage your iCloud?', and have you rebooted your iPhone. I think the idea is to delete yor previous backups and start with a new one.

How can I get LION to let me see the side of folders?

How can I get LION to let me see the side of folders?
and files? at the bottom of the window as in snow leopard.
I miss this and rely on it to monitor the available space on the hard drives ect.

Dov, that is close but not in the status bar but at the bottom of the volder window. Surely , everyone can't have forgotten snow leopard and leopard et al already, where you could could to display at the bottom of all ovened folders to see the status of the the files and hard drive. Boy I WISH I HAD A SCREEN SHOT OF WHAT I AM TALKING ABOUT.
Yes you can get the info from get info and in the list view. But we use to be able to have a line at the bottom that gave a running total, which to me was very useful as I throughput mondo files to discrete drives thoughout my network for sorting photos by topic to seperate drives.
ah here we go a screen shot off my macbook running snow leopard, it is that grey bar at the bottom which says "4 items 137,26 GB available",that I am wanting in the LION window bottom.

How can I get Lion re installed after crash and no recovery disk?

I bought Lion some time ago I did not do a recovery disk and now I had a huge crash. I started over with Snow Leopard cause that's all I had. How can I get Lion re installed?

Make sure you're up to 10.6.8 through Software Updates, and then re-download Lion from the App Store.
Incidentally, many Macs (from 2010 models onwards) have the ability to run Internet Recovery, even if your original hard drive crashed, which will allow you to re-download and install Lion directly from the internet.
But the best way is always to have a local backup of your system drive.
Matt

How can I get Lion to recognize my boot camp partition.

Similar Messages

Maybe you are looking for