How can I get music to open with songs, not with albums

How can I get music to open with songs instead of albums?

I was hoping to not have to click on 'songs' evey time I open iTunes..........

Similar Messages

How can I get CS3 to open on new iMac with 10.6.4?

Just bought a new iMac and am trying to get everything moved over to it. I use Dreamweaver, Fireworks & Contribute from CS3. When I try to open any of them (newly installed from the Adobe downloads) I get this error message:
file://localhost/Users/jeanetteg2/Desktop/Screen%20shot%202010-07-11%20at%206.39.27%20PM.p ngLicensing for this product has stopped working.
You cannot use this product at this time. You must repair the
problem by uninstalling and then reinstalling this product or
contacting your IT administratoror Adobe customer support for help.
Tried uninstalling and reinstalling, still the same....
Tried out Dreamweaver CS5 and don't like the changes they've made - doesn't work near as well for me as my old CS3!

Did you look at the system requirements for CS3?
I am not sure about CS3, but I owned CS2. When I wanted to upgrade to CS4 (I usually skip a version because of the cost), my PowerPC was pretty much obsolete. CS4 requires an Intel-based computer. So I bit the dust and bought a new MacPro (intel-based). Consequently CS2 no longer works on my new Mac, and CS4 does not work on my wife's older Mac (her's is not intel-based). I think it's all a conspiracy to make us buy new computers and software .
good luck,
matt

In my received emails, how can I get Firefox to open URL links that begin with "click."?

In my emails, how can I get Firefox to open links that begin with the word "click."? Instead of giving the me the message that says, for example, "Firefox can't find the server at click.americas.links.hp.com." This also happens when I try to open the links using Explorer.

This link was not valid when I clicked it. Please contact the person sending these links they do not seem to work. The page takes me to a page that says it will load after 5 seconds, however there is not valid link.

Help! I can preview the presentation in Finder however, when I click on "Open with Keynote" it says, "presentation can't be open". How can i get it to open?

Help! I can preview the presentation in Finder however, when I click on "Open with Keynote" it says, "presentation can't be open". How can i get it to open?

Select one and hit the Space bar to view it in QuickLook. Use the forward arrow keys to move from file to file. If the file can't be viewed in the QuickLook mode then the file is damaged and probably can't be copied or moved.
You could try a photo file recovery application like MediaRECOVER which can scan the memory card and tell you what files, if any, can be recovered before you have to purchase it.
OT

How can I get music from old mac to new mac?

How can I get music from old mac to new mac please?
Can't seem to make Migration Assistant work. Doesn't ask about or transfer files.

I just migrated into a new MBP from an old one.
It did not bring the music over. Apple's instructions are to use the Home Sharing feature of iTunes.
Open iTunes on your old Mac. Select Home Sharing under the Advanced menu. Sign in. Do the same on your new computer. Then when the library appears under Home Sharing on the left-hand panel on your new computer's iTunes, you can select all and Add To Library.
That's what Apple says, anyway.

How can I get files to open automatically upon download?

I would like files I download to open automatically and for the download window to be turned off. I know how to turn off the download window, but cannot get files to automatically download.

Hi JJMack. Thanks for getting back to me.
I think I've created confusion about what I want. All I want is to end up with a file that is flattened so that I can save it as a tiff without getting a warning that it contains layers. Please correct me if I’m wrong but I’ve always assumed I should always flatten a file before I save it as a tiff unless I specifically want to retain layers or transparency. I’m only talking here of files that open with a single layer: ie. Layer 1. I assume that if I don’t flatten such files the resultant files will be unnecessarily big?
The only reason I keep saying I want a Background layer is that I know that a flattened file will only have a Background layer. I don’t have any desire for a Background layer per se. I certainly don’t want to add extra layers - quite the opposite.
So perhaps the question I should have asked should have been:
How can I get files to open 'ready-flattened' by default so I can save them directly to tiff without having to manually flatten them every time?
Cheers

HT6114 After the latest OS X update (10.9.2) I cannot open Outlook (Office for MAC 2011). Outlook flashes briefly then nothing happens. How can I get Outlook to open?

After the latest OS X update (10.9.2) I cannot open Outlook (Office for MAC 2011). Outlook flashes briefly but does not open. How can I get Outlook to open?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

How can i get music from my ipod nano to my iphone 4s?

How can i get music on my ipod nano to my iphone 4s?

iPods (except iPod touch which is really an iPhone minus the phone) only sync with your computer running iTunes. So it needs to go through the computer.
Since you loaded the iPod from your computer's iTunes library, you can just load the same songs from your iTunes library to the iPad.

How can i get all these values in single row with comma separated?

I have a table "abxx" with column "absg" Number(3)
which is having following rows
absg
1
3
56
232
43
436
23
677
545
367
xxxxxx No of rows
How can i get all these values in single row with comma separated?
Like
output_absg
1,3,56,232,43,436,23,677,545,367,..,..,...............
Can you send the query Plz!

These all will do the same
create or replace type string_agg_type as object
2 (
3 total varchar2(4000),
4
5 static function
6 ODCIAggregateInitialize(sctx IN OUT string_agg_type )
7 return number,
8
9 member function
10 ODCIAggregateIterate(self IN OUT string_agg_type ,
11 value IN varchar2 )
12 return number,
13
14 member function
15 ODCIAggregateTerminate(self IN string_agg_type,
16 returnValue OUT varchar2,
17 flags IN number)
18 return number,
19
20 member function
21 ODCIAggregateMerge(self IN OUT string_agg_type,
22 ctx2 IN string_agg_type)
23 return number
24 );
25 /
create or replace type body string_agg_type
2 is
3
4 static function ODCIAggregateInitialize(sctx IN OUT string_agg_type)
5 return number
6 is
7 begin
8 sctx := string_agg_type( null );
9 return ODCIConst.Success;
10 end;
11
12 member function ODCIAggregateIterate(self IN OUT string_agg_type,
13 value IN varchar2 )
14 return number
15 is
16 begin
17 self.total := self.total || ',' || value;
18 return ODCIConst.Success;
19 end;
20
21 member function ODCIAggregateTerminate(self IN string_agg_type,
22 returnValue OUT varchar2,
23 flags IN number)
24 return number
25 is
26 begin
27 returnValue := ltrim(self.total,',');
28 return ODCIConst.Success;
29 end;
30
31 member function ODCIAggregateMerge(self IN OUT string_agg_type,
32 ctx2 IN string_agg_type)
33 return number
34 is
35 begin
36 self.total := self.total || ctx2.total;
37 return ODCIConst.Success;
38 end;
39
40
41 end;
42 /
Type body created.
[email protected]>
[email protected]> CREATE or replace
2 FUNCTION stragg(input varchar2 )
3 RETURN varchar2
4 PARALLEL_ENABLE AGGREGATE USING string_agg_type;
5 /
CREATE OR REPLACE FUNCTION get_employees (p_deptno in emp.deptno%TYPE)
RETURN VARCHAR2
IS
l_text VARCHAR2(32767) := NULL;
BEGIN
FOR cur_rec IN (SELECT ename FROM emp WHERE deptno = p_deptno) LOOP
l_text := l_text || ',' || cur_rec.ename;
END LOOP;
RETURN LTRIM(l_text, ',');
END;
SHOW ERRORS
The function can then be incorporated into a query as follows.
COLUMN employees FORMAT A50
SELECT deptno,
get_employees(deptno) AS employees
FROM emp
GROUP by deptno;
###########################################3
SELECT SUBSTR(STR,2) FROM
(SELECT SYS_CONNECT_BY_PATH(n,',')
STR ,LENGTH(SYS_CONNECT_BY_PATH(n,',')) LN
FROM
SELECT N,rownum rn from t )
CONNECT BY rn = PRIOR RN+1
ORDER BY LN desc )
WHERE ROWNUM=1
declare
str varchar2(32767);
begin
for i in (select sal from emp) loop
str:= str || i.sal ||',' ;
end loop;
dbms_output.put_line(str);
end;
COLUMN employees FORMAT A50
SELECT e.deptno,
get_employees(e.deptno) AS employees
FROM (SELECT DISTINCT deptno
FROM emp) e;
DEPTNO EMPLOYEES
10 CLARK,KING,MILLER
20 SMITH,JONES,SCOTT,ADAMS,FORD
30 ALLEN,WARD,MARTIN,BLAKE,TURNER,JAMES
CREATE OR REPLACE FUNCTION concatenate_list (p_cursor IN SYS_REFCURSOR)
RETURN VARCHAR2
IS
l_return VARCHAR2(32767);
l_temp VARCHAR2(32767);
BEGIN
LOOP
FETCH p_cursor
INTO l_temp;
EXIT WHEN p_cursor%NOTFOUND;
l_return := l_return || ',' || l_temp;
END LOOP;
RETURN LTRIM(l_return, ',');
END;
COLUMN employees FORMAT A50
SELECT e1.deptno,
concatenate_list(CURSOR(SELECT e2.ename FROM emp e2 WHERE e2.deptno = e1.deptno)) employees
FROM emp e1
GROUP BY e1.deptno;
DEPTNO EMPLOYEES
10 CLARK,KING,MILLER
20 SMITH,JONES,SCOTT,ADAMS,FORD
30 ALLEN,WARD,MARTIN,BLAKE,TURNER,JAMES
CREATE OR REPLACE TYPE t_string_agg AS OBJECT
g_string VARCHAR2(32767),
STATIC FUNCTION ODCIAggregateInitialize(sctx IN OUT t_string_agg)
RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateIterate(self IN OUT t_string_agg,
value IN VARCHAR2 )
RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateTerminate(self IN t_string_agg,
returnValue OUT VARCHAR2,
flags IN NUMBER)
RETURN NUMBER,
MEMBER FUNCTION ODCIAggregateMerge(self IN OUT t_string_agg,
ctx2 IN t_string_agg)
RETURN NUMBER
SHOW ERRORS
CREATE OR REPLACE TYPE BODY t_string_agg IS
STATIC FUNCTION ODCIAggregateInitialize(sctx IN OUT t_string_agg)
RETURN NUMBER IS
BEGIN
sctx := t_string_agg(NULL);
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateIterate(self IN OUT t_string_agg,
value IN VARCHAR2 )
RETURN NUMBER IS
BEGIN
SELF.g_string := self.g_string || ',' || value;
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateTerminate(self IN t_string_agg,
returnValue OUT VARCHAR2,
flags IN NUMBER)
RETURN NUMBER IS
BEGIN
returnValue := RTRIM(LTRIM(SELF.g_string, ','), ',');
RETURN ODCIConst.Success;
END;
MEMBER FUNCTION ODCIAggregateMerge(self IN OUT t_string_agg,
ctx2 IN t_string_agg)
RETURN NUMBER IS
BEGIN
SELF.g_string := SELF.g_string || ',' || ctx2.g_string;
RETURN ODCIConst.Success;
END;
END;
SHOW ERRORS
CREATE OR REPLACE FUNCTION string_agg (p_input VARCHAR2)
RETURN VARCHAR2
PARALLEL_ENABLE AGGREGATE USING t_string_agg;
/

I am trying to use powerpoint but when I open a document I want to work on it does not open on my desktop. It appears as open on mission control but it disappears offscreen. How can I get it to open where i need it and can work on it?

I am trying to use powerpoint but when I open a document I want to work on it does not open on my desktop. It appears as open on mission control but it disappears offscreen. How can I get it to open where i need it and can work on it?

It's almost certainly too late.
The time to create a backup is before a catastrophe. After a catastrophe, it's too late.

How can i get music to not show up on my phone that i dont want there

how can i get music to not show up on my phone that i dont want there

If the app is G-Toolkit and you have a Gmail app on your iPhone, delete the Gmail app. Apparently the G-Tool kit is tied to a Gmail app. From searching the web my impression is that G-Toolkit is not spyware and is from a legitimate company that produces app for several platforms.

How can I get my hp Laserjet 1012 to work with Windows 7?

How can I get my hp Laserjet 1012 to work with Windows 7?

Here is a list of products that are not supported in the win7 OS. This product is listed there.
Products not supported in win7
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

How can I set home page for a new tab? how can i get firefox to open the home page every time i open a new tab in Windows vista home basic??

How can I set home page for a new tab? how can i get firefox to open the home page every time i open a new tab in Windows vista home basic??
== This happened ==
Every time Firefox opened

Firefox can have multiple home pages if you wish. Each home page that will open when starting Firefox is separated by the "|" character.
See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
To have new tabs open a specific web site, add one of the following extensions:
http://sogame.awardspace.com/newtaburl/
https://addons.mozilla.org/en-US/firefox/addon/777

How can i get a copy of my ipone messages with the number, date and time stamp?

How can I get a copy of my iphone messages with the number it was sent from and the date and time stamp? Needed for court purposes.

Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
http://www.ecamm.com/mac/phoneview/
http://www.wideanglesoftware.com/touchcopy/index.php
You should probably consult your attorney to see if either of these will be acceptable.

In the iMovie 11 event library, how can I get the iPhoto video clips to combine with my camcorder pics listed below and in chronological order?

In the iMovie 11 event library, how can I get the iPhoto video clips to combine with my camcorder pics listed below and in chronological order?

Try forcing iPhoto to load the Library on the External Hard drive by launching it while holding down the Option key. Choose the Library on the External HD, and quit iPhoto, see if iMovie can see the Library with the iPhoto Videos contained inside.

How can I get music to open with songs, not with albums

Similar Messages

Maybe you are looking for