How can I get my Canon 885 to work on my Macbook Air - no software download from Apple?

I have a Canon 885 printer, and can't get a download from Apple for it.
I hacve downloaded the file from Canon, but the computer doesn't seem to want to see it.
Can anyone help?

I didn't see that your printer was supported, but since you didn't supply the full model (letters), you can check to see:
http://support.apple.com/kb/HT3669
If it is supported, here is a link to Canon drivers:
Canon: http://support.apple.com/kb/DL899
Printer setup:
http://support.apple.com/kb/PH11145?viewlocale=en_US

Similar Messages

  • How can I get my Canon A620 to work with Windows 7

    Just signed up here, ot the brightest with tech stuff. I'm trying to get my Powershot A620 to work with Windows 7. I'm guessing there's drivers I need to down load ? Will they be on the Canon website or on this help site ? 
    I'll keep looking around. 
    Steve

    If you need photo software and don't have any you can download Canon software here.
    http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a620#Dri...
    But if you already have software you use there is nothing special you need. Ether connect the camera using a USB cable or remove the SD card from the camera and use a card reader (either an external one or the computer may already have one built in.)
    If  you decide to connect the camera via USB you don't need a driver; its built into W7.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • How do i uninstall yahoo weather on iphone 4 cause it *****, and how do i get a weather widjet on lockscreen and change lockscreen, as apps i download from apple, lie to a human, please there has to be a way to jolt these phones and erase or uninstall har

    how do i uninstall yahoo weather on iphone, it no good, and the weather apps i do download say widjet for on screen lockscreen dont work as it says compatable but doesnt, and how do i change the apperance of lockscreen swip and the factory sound on screen for facboook notifications and gmail, to something different no option under sound, in settings for those to things, man ny old star tech anolog did better then this iphone. please help people. and havin to pay $35.00 just to talk to someone on app *****.

    You're welcome. And CDMA still exists! However, the newer devices for Verizon, from the iPhone 5 and above, come with a GSM slot and it is unlocked from the beginning to use with other GSM networks. If you do not want to return the phone for a refund, Apple has a recycling program, but you don't get much for it. You would be better to sell it outright as I said. Be careful though as you purchase newer phones on the internet, as they could be locked with Activation lock and you would need to contact the original owner to get the device unlocked, and if you read much here, that can be next to impossible to do sometimes, and Apple will not help. Good luck with your phones.

  • I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone an i have internet and all other functions working on my computer

    I have a macbook pro version 10.7.5 and my mailbox will not open at all and comes up with a quit message even though it is not open. how can i get into my account. it works on my iPhone and i have internet and all other functions working on my computer

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—the text, not a screenshot. I know the report is long. Please post all of it anyway.
    In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
    Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

  • How can I get my web cam to work in Adobe Connect ?

    This is actually an end user's question that I am having trouble answering to...
    We use Adobe Connect to give online language classes, the end user is one of the students.
    I cannot find the right Support answer to give him.
    Problem:
    My camera does not work when I connect to Adobe's rooms but camera works fine with other software.
    Even though I suspected my old camera was working fine, yesterday I went ahead and bought a new camera. 
    I thought perhaps my webcam software may have been a problem, so I bought a different type camera with different software. 
    Even after removing all the old software, same result:  
    I surmised the problem might be caused by my firewall and security software, so once I tried changing the permissions for Adobe, and my Webcam, but that didn’t work.   
    Another time, I restarted my computer right before class and then turned off my firewall completely so there would be no interference but to no avail. I’m totally perplexed.  
    Isn’t there anyone else experiencing a similar problem?   Has anyone else found a solution? 
    I run Windows Vista with McAfee Internet Security Software.  I always reboot the computer before class and open no other programs other than Google Chrome. 
    I now have a brand new Microsoft LifeCam Cinema Camera with LifeCam 3.5 Webcam Software. 
    I test my camera before going online.  It always works fine.   Then I shut down the camera program and login into class.   
    When I “connect webcam” in the room, the light on my camera comes on (suggesting that it is ON), but only a black image is transmitted to the room.

    Check to see if you have Google Voice installed. If so, remove it and see
    if your problem vanishes. If not Google Voice, check to see if you have
    any other communications software which interacts with your cam and
    disable it. This was the problem I had with a similar problem on a Mac.
    MosesJOI <[email protected]>
    10/13/11 12:08 PM
    Please respond to
    [email protected]
    To
    jsb152 <[email protected]>
    cc
    Subject
    How can I get my web cam to work in Adobe Connect ?
    Re: How can I get my web cam to work in Adobe Connect ?
    created by MosesJOI in General Discussion - View the full discussion
    Thanks a lot Heyward for the swift reply !
    I sent the advice out to the end user, but unfortunately this wasn't the
    solution.
    His reply is below :-
    The default resolution of my new camera is already set at 640x360, but I
    went ahead and tried several lower resolutions (e.g. 424x240; 320x240; and
    160x120) but none worked in the room - camera still showed up as black
    blank screen.  Also, as far as I can tell, I don’t have the option of
    adjusting the frame rate.
    I started playing around with my Internet Security Settings to see if they
    might be playing a role. So far, all to no avail.
    Hmm...quite a tricky one - webcams always are - maybe if he can find a way
    to adjust the frame rate (?).
    He's going to fiddle about with the settings a bit more and see if
    something does the trick.
    If anyone has had a similar problem and found an ingenious solution,
    please jot on a note on this thread.
    Replies to this message go to everyone subscribed to this thread, not
    directly to the person who posted the message. To post a reply, either
    reply to this email or visit the message page: [
    http://forums.adobe.com/message/3969561#3969561]
    To unsubscribe from this thread, please visit the message page at [
    http://forums.adobe.com/message/3969561#3969561]. In the Actions box on
    the right, click the Stop Email Notifications link.
    Start a new discussion in General Discussion by email or at Adobe Forums
    For more information about maintaining your forum email notifications
    please go to http://forums.adobe.com/message/2936746#2936746.

  • How can I get iCloud to accept my working Apple ID and password

    My Apple ID and password works for iTunes and App Store.  I'm trying to set up iCloud on my iPhone and iPad but i keep getting an error message that reads unsupported ID.  Apple ID must be in the form of email address (@me.com).  I don't have a MobileMe account. How can I get iCloud to accept my working Apple ID and password?

    I've also reset my password to my Apple ID. I still get the Unsupported ID and password.

  • How can I get my itunes onto my new laptop? Do I need to download itunes again or can I just copy it? My ipod classic has since been soaked in water and does not work so I cannot copy from there. Can anyone help?

    How can I get my itunes onto my new laptop? Do I need to download itunes again or can I just copy it? My ipod classic has since been soaked in water and does not work so I cannot copy from there. Can anyone help?

    You should copy everything from your old comptuer to your new one.

  • How can I get my iTunes remote to work on my laptop?

    I have a remote for my desktop that controls iTunes on it, however I rarely use it because I recently got a Macbook Pro.  How can I get the remote to control iTunes on my Macbook? 

    The desktop remote will only work with your desktop.  If you purchased a new Macbook Pro, its remote is sold seperately.
    At one time, the remote was included.  Unknown when it all changed. 

  • How can I get my excel spreadsheet to work in numbers

    How can I get this budget sheet to work in numbers when it's from excel.

    I couldn't get the picture of the whole thing it wouldn't load but you see where it say like 700.00 then below that it say 175.00 well that part works telling me what I need to know but when it get to where it says the 850 it stops working? it won't sum it out or something I'm not great with excel and this was sent to me by a first and it's our budget plan and I really need to be able to use it

  • How can I get my iPhone 5s to work in my 2015 outback

    How can I get my iPhone 5s to work in my 2015 outback?

    I Tried that and I can get calls out and in but no messaging.
    AWindow opens and says this feature is not supported  on this device
    my iPhone 4 worked fine   is it my iOS?

  • How can I get an external microphone to work on an iphone?

    How can I get an external microphone to work on an iphone?

    Japib is correct.
    WHAT happens? Exactly.
    Also helpful would be to tell what event preceded this behavior - added App, update iOS, etc.
    Quoted from  Apple's "How to write a good question"
       To help other members answer your question, give as many details as you can.
    Include your product name and specs such as processor speed, memory, and storage capacity. Please do not include your Serial Number, IMEI, MEID, or other personal information.
    Provide the version numbers of your operating system and relevant applications, for example "iOS 6.0.3" or "iPhoto 9.1.2".
    Describe the problem, and include any details about what seems to cause it.
    List any troubleshooting steps you've already tried, or temporary fixes you've discovered.
    ÇÇÇ

  • How can I get serial numbers or the free versions of Adobe, Air, Flash Player 14, and Reader XI Pro

    How can I get serial numbers or the free versions of Adobe, Air, Flash Player 14, and Reader XI Pro that I had installed on my computer before Microsoft crashed my computer and I had to do a fresh install? I finished reinstalling Win 8.1Pro on my computer thanks to Microsoft Lvl 1 Techies corrupting my Command Structure so nothing would work. I had recently taken a picture of my installed programs (control panel, uninstall programs list) so that I would be able to reinstall everything I needed. I can't seem to find an email for the Reader which I remember paying for, the others I believe were free installs. Can anyone help me out.

    Safari Version 5.0.5  <  from your first post
    5.0.5 is an outdated version of Safari.
    There is an update available for Safari for version 5.1.1
    That may help.
    Click your Apple menu icon top left in your screen the click Software Update
    Restart your Mac after the updates are installed.
    Try full screen ...
    If you have problems using Software Update from the menu you can use the standalone installer here >  Safari 5.1.1

  • I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

    I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

    For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
    For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
    See: 
    http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html  
    Be well...

  • How can I get the photos on my pc onto my Macbook without emailing each one individually to myself?

    How can I get the photos on my pc onto my Macbook without emailing each one individually to myself?

    Welcome to Apple Support Communities.
    Copy them from your PC to a flash drive or an external drive, then open iPhoto and select Import to Library.
    Depending on your settings, iPhoto might open automatically and ask if you want to import them when the device (camera or flash drive or external drive) containing the images is connected.
    At the end of the import, iPhoto will ask if you want to delete or keep the photos on the other device. Keep until you're absolutely certain all images are imported correctly and you've viewed them in iPhoto. It's always nice to have a backup.

  • Answer: to How can I get the reset button to work.

    How can I get the reset button to work?: Answer
    Thanks to everyone who helped on this. You are awesome. Especially Ned!!  Posted here because I was unable to add more to the existing post.
    Here is the question:
    When you click on the reset button, this error below comes up. If you can't find the button it is the navy colored rectangular thing in the lower left corner of page.
    ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
        at flash.display::DisplayObjectContainer/removeChild()
        at AddATree2/onReset()
    When you click on the reset button, this error below comes up. If you can't find the button it is the navy colored rectangular thing in the lower left corner of page.
      Here is the answer:
    //when you click the reset button everything is removed from the stage
        //except the star, baclground, and reset button (trees and greeting REMOVED)
        public function onClear(Event:MouseEvent):void
                if (tree3) removeChild(tree3);
                if (tree2) removeChild(tree2);
                if (webText) removeChild(webText);
                if (tree) removeChild(tree);
                clickCount = 0;

    This is the answer to what to put in the onclear function.

Maybe you are looking for