How can I get my Canon A620 to work with Windows 7

Just signed up here, ot the brightest with tech stuff. I'm trying to get my Powershot A620 to work with Windows 7. I'm guessing there's drivers I need to down load ? Will they be on the Canon website or on this help site ? 
I'll keep looking around. 
Steve

If you need photo software and don't have any you can download Canon software here.
http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a620#Dri...
But if you already have software you use there is nothing special you need. Ether connect the camera using a USB cable or remove the SD card from the camera and use a card reader (either an external one or the computer may already have one built in.)
If  you decide to connect the camera via USB you don't need a driver; its built into W7.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Similar Messages

  • How can I get Acrobat 7 Pro to work with Windows 8.1 Pro?

    Apparently Acrobat Pro 7 is not compatible with Windows 8.1 Pro X64. I am trying to save a web page to pdf but this feature does not work in Windows 8.1 Pro. Is there a patch or update that will fix this problem?

    It might be possible to get a lot of it working, but you will have to install a separate PS driver and rename it Adobe PDF and set the port to File. The print process is then to print to the Adobe PDF printer and then open the created file in Distiller to complete the process. I have been successful with this on a Win7, 64-bit system, but not tried it on a Win8 system. You are pretty much on your own if problems arise, unless you are willing to try wild suggestions that we might give (guesses really).

  • I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

    I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

    For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
    For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
    See: 
    http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html  
    Be well...

  • How can I get my Firefox persona to work with the new version of Firefox?

    Everything was working fine, then my computer automatically updated Firefox and my persona background disappeared. It's listed as enabled on the add-ons backgrounds under add-ons manager. I have Foxkeh tail wag. I went and reinstalled it but it still doesn't come on. I went to the firefox personas page and tried to install a different persona. NONE of them work now. How can I get my persona background back?

    Fixed! Thank you!

  • How can we get the web cam to work with sykpe or any out going calls

    can get the web cam to work with skype

    Hey there,
    What model laptop is this? Are you using the built-in webcam or is this a external web cam? Also what operating system are you using?
    Thanks!
    Sean
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • How do i get a scanjet 5200c to work with windows 7?

    I have a Scanjet 5200c that worked well with Windows XP.  When I went to Windows 7, it stopped working.  HP support said they did not support this machine with a driver for Windows 7.  Why not?  How can I get this perfectly good scanner up and running again?

    BSLund, welcome to the forum.
    I do not work for HP, but I have experience with driver development.  Once printers/scanners get older, it becomes too difficult to continue updating the driver.  There are newer printer/scanners that have to be supported.  Drivers are difficult to develop and maintain.  It is not as simple as going to the code and changing the model or OS version.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • How can I get my Canon 885 to work on my Macbook Air - no software download from Apple?

    I have a Canon 885 printer, and can't get a download from Apple for it.
    I hacve downloaded the file from Canon, but the computer doesn't seem to want to see it.
    Can anyone help?

    I didn't see that your printer was supported, but since you didn't supply the full model (letters), you can check to see:
    http://support.apple.com/kb/HT3669
    If it is supported, here is a link to Canon drivers:
    Canon: http://support.apple.com/kb/DL899
    Printer setup:
    http://support.apple.com/kb/PH11145?viewlocale=en_US

  • How can I get my new camcorder to work with iMovie?

    Hey
    I just bought the new Panasonic SDR-SW20 and it doesn't work with a Mac.
    At least that is what I read at amazon.com.
    The file types it records in are .MOD files. Can these be converted?
    And if they can, how do I do that and what program do I need?
    Could someone maybe explain to me how I can get it to work with iMovie?
    Thanks.
    Bye Sandra

    Hi Sandy,
    Yes, you bought the wrong format of cam for working easily with iMovie HD6. Your cam records in MPEG2, which will need to be converted to DV for use in iMovie. You might want to read what the following page says about that cam's format.
    http://www.camcorderinfo.com/content/Panasonic-SDR-SW20-Camcorder-Review-35018/F ormat.htm
    It doesn't give a good review of the video quality and that will only get worse with the conversion necessary to work with it in HD6. If returning the cam for something more suitable is possible, unless you have bought this solely for its underwater capabilities, that might be your best bet. The best cam for use with iMovie HD versions is a miniDV cam using firewire, to capture to your Mac.
    If you want to persue the workarounds, you will need to get MPEGStreamclip (free-Google it) and the Apple QuickTime MPEG2 plug-in (cost $20.00), available at the Apple downloads site.
    Hope this helps you.
    Forest

  • Please Help, How can I get 24Frame .mov's to work with broadcast footage?

    Hello,
    I am desperate for some help. I have 24 Frame image sequences and 29.97 B-Roll footage that I need to work with. I am forced to work in the B-Roll frame rate because it is a mixture of scenes and all the interlace is different shot to shot.
    So my question is how can I take this 24 Frame CG and get it to 29.97? I can’t conform it in Cinema Tools because it speeds up the timing. I can’t add pull down in After Effects because it looks really bad. Is there any other way that I can add pull down to this footage and have it still look good?
    I am in desperate need for some help so even some conversation might get the ball rolling.
    Thanks in advance

    I'm really surprised that you say it is looking bad out of After Effects since that is a good way to add the pulldown. What is it that is looking bad? Is the comp set up correctly? Is the CG stuff a true 24? You might want to conform it to 23.98 in Cinema Tools, then try adding the pulldown in AE. I don't think it should matter except that you aren't truly pulling down to 30fps so you'll have to change the rate at some point.
    The only other way I know to add the pulldown, is to use FinalCut at a 23.98 sequence, play it out to tape to add the pulldown, then capture it back in.

  • How can i get my iPhone 4 to work with my new macbook pro

    i just got a new macbook and i want to start using my iPhone 4 with iTunes but it won't allow me to move music to or from the iPhone how can i solve this? i really don't want to factory reset my phone and have to replace all music/apps.

    This: http://www.headlightsoft.com/expod/
    or this: http://www.macroplant.com/

  • How can I get i phone 4s to work with a tom tom car kit

    I upgraded to an i phone 4s from an I phone 3gs.  My tom tom app worked perfectly with the tom tom car kit on my old phone but now I have managed to get it to charge when plugged into the car kit but there is only poor gps reception showing, any Ideas on how to get my beloved sat nav back

    hi, I've got the same problem, cant get it to even charge so behind you on that. have looked on the tomtom site and see that they only stipulate that it will work with 3, 3s and 4 ..... miss out 4s! presumably there is an upgrade on the way!

  • How can I get my metronome click to work with 12/8 meter in Logic?

    I'm trying to get my KlopGeist click to 12/8 music.
    I can get it work with 4/4 and click on divisions set to 12th, but I cannot get truely 12/8.
    It's ok to recore, but the notation is different.
    Can anyone give me an answer?
    Thank you.

    You can try some workaround like this...
    Create an Arrange track for the Klopfgeist (instrument 256). Create a new (one bar) region and draw 4 dotted notes using pitch say G5. Select the region and set ins "Loop" parameter to ON in the track inspector. Done.
    When you need Click you can Mute/Unmute the Klopfgeist track instead of tweaking the Click button in the Transport.
    Another scenario can be done using the Environment click object and building a small Environment tool which can work with the Logic transport click etc.
    A.G
    www.audiogrocery.com
    Author of: Logic GUI Deluxe (Free),
    Vox De Bulgaria - s.a.g.e vocal pack for RMX,
    Logic Snapshot Console,
    RMX Power CTRL - Logic Environment Midi editor for Stylus etc.

  • HT204655 How can I get an Aperture version that works with 10.10.3?

    Photos seems to be a minimal improvement to iPhotos and a terribly inadequate replacement for Aperture.  Aperture is working with 10.10.2 on my new MAC, but when I installed 10.10.3 on my macbook, Aperture is crossed out.  When I open it, I get a message "this version of Aperture does not work with OS X Yosemite".  It also says I can get the correct version from the App store for free.  when I look for Aperture on the App store it is not listed.  What has Apple done?

    I Called Apple and they walked me through the process of getting Aperture to work on OSX 10.10.3:
    Find Aperture in your Applications folder then
    Drag it to Trash and empty Trash (your Aperture library is not affected by this).
    Restart your computer
    Log on to App Store, and find your Purchases
    locate The Aperture application.
    It should show Install, and not Upgrade at this point.
    click on that to download Aperture 3.6
    instal that in your Applications folder.
    Of course, this only works if you purchased Aperture from Apple, and registered it with them.
    This is worked for me and I now have Aperture 3.6 running on Yosemite. The drawback here is that there is no further support will be offered for Aperture, so another alternative will eventually be required. I took advantage of an offer from Adobe, and downloaded Lightroom CC and Bridge CC (Creative Cloud). I already had Photoshop CC, but they bundled it all together for me at a very reasonable price. All these applications will use your Aperture and iPhoto libraries should you wish to import them into the application, so there will be no duplication of Libraries.  Hope this helps you like it did me.
    Thank you for posting your solution. I'm sure it will help others in the future.
    You know, many people continue to use discontinued software for years without problems. There are millions of people out there still using iMovie HD 06 and iDVD because there is nothing better.

  • How do I get Adobe Professional 8 to work with Windows 7?

    I have a new computer with Windows 7 on it and when I try to install Adobe Professional 8 it says I need a Windows Vista Adobe PDF.dill file.  Where can I find this file?  I do not have Windows Vista.

    Error "The file AdobePDF.dll is needed" | CS3 | 64-bit Windows

  • How can I get my photosmart 3180 to work with my new extreme

    I have looked around here, and just can't figure this out, please someone help. I just purchased a 3180 hd with my macbook. Was printing wirelessly fine with my previous hd and new extreme. Now this one isn't working and hp said that it is not a supported wireless printer. Why on earth would apple sell this printer then.
    Could someone please tell me how to make this printer work over my new airport extreme base. PLEASE

    Hey Gabriel (and anyone else interested)
    I was glad to find your post as I had the same issue. My HP Photosmart C3180 would not appear anywhere with my new Airport Extreme 802.11n. I got it to work, but print only (no scan):
    First, remove the HP drivers that you may already have on your Mac. Go to Applications, Hewlet-Packard, and run the Uninstall program. Then go to Utilities, and run Activity Monitor. Locate the handful of activites that are HP related (I had 4) and remove them. Empty the Trash, then Restart. At this point you should be free of HP drivers.
    My setup is with an AirDisk and the printer, both USB to the AEBS through a simple USB hub. While the printer and the Extreme don't seem to get along, I found a thrid party driver that glues it all together nicely.
    http://gimp-print.sourceforge.net/MacOSX.php3
    Download the installer for Gimp-Print 5.0. After you run the install, simply go to System Preferences, Print & Fax. Click on the + in the lower right hand part of the screen and new window appears. Click on "Default Browser" in the upper right hand corner and you should see "HP Photosmart C3100 Series" appear with the Bonjour connection. (Make sure, of course, you are connected to your wireless network, everything is hooked up, the printer is on, and Bonjour is enabled).
    that was it! I printed the first page I had open in Preview and it worked flawlessly.
    Now, when I want to scan.... I'll probably just do this whole thing backwards and hook it up with the USB cable to my Mac. We'll cross that bridge next time.

Maybe you are looking for

  • STARTSAP_NBAS Phase DDIC password locked

    Guys, We are doing 4.6c upgrade to ERP6 and during STARTSAP_NBAS phase DDIC locking out and cant start SAP original system. We tried to unlock the password and also did the reset using SAPup reset DDICpwd. But its still locking out. When we tried to

  • How can I make slides NOT advance automatically?

    I'm building a project manually by making new slides and putting graphics and text on them.  It's not a recording of software.  I would like the user to read each slide for as long as they want to, then click to go to the next one.  I can't find a se

  • Translation of texts on Dynpro - Length !!

    Hello, I have some texts of type Label, Radiobutton, Checkbox on my dynpro and now I have to translate it. The route is Goto --> Translation --> CS (language). I get a list of texts but the problem is that some of them are to short for the translatio

  • Address book unknown addresses

    Can someone tell me why I am getting people's names in my address book that I have never heard of? Thanks . BGE

  • Can we get header

    Hi frends I am using FM so_new_document_send_api. to send data to the external pupose in that i am sending some data can we get in thse format purchaseno  stock material qty 1              23       mat          1 2             24        mat1        2