How can I get photo and info into contacts from photo

I have photos with critical contact info. How can I transfer into contacts on iPhone and iPad?

Are the photos on your phone/iPad? If so, just edit each contact and assign that photo to them.

Similar Messages

How can i keep mine and my husbands contacts from combining when syncing phone

How can i keep mine and my husbands contacts from combining when syncing our phones

Don't sync each iPhone with the same supported address book app on the shared computer.
There are a number of free email accounts that support syncing contacts over the air such as with a free iCloud account, with a Yahoo account, Gmail account, and Hotmail account.
Do that instead with different accounts for each of you and no longer sync contacts direct with a supported address book app on your computer.

How can I get rid of my own contacts from my wife's contacts list?

Somewhere along the way my wife's contacts app on her iPad, her Mac and iCould, was populated with all of my own contacts (lots). How can I get rid of mine without deleting her own. I have backed up her contacts on the Mac and I have checked that new contacts are not appearing on each other's lists. Hers is an iPad 2 running iOS 8.1.1. The Mac is running Mavericks.

Contact iTunes Support and request that they zero out your account balance.
iTunes Support -
http://www.apple.com/support/itunes/

How can I get Category, Tags info into new PC?

Old PC (Vista) crashed - the most recent backup was a system backup - it was not a Catalog backup utilizing PhotoShop Elements 6. However, I have a PSE 6 catalog backup done 6 months prior. But, can I get the more recent info from a Catalog folder?
On my new PC(Windows 7), loaded PSE 6, restored my 12,000 photos from the system backup file. None of my category, tags are listed in the Pane on the right side in my Photo Browser. Can I copy a catalog folder from the program files to bring those settings into my new PC? If so where do I copy it to?

I want to know if I can utilize the program file
that would be more current with category, tag settings; copy it into my PC and have PSE 6 utilize it for the settings?

Somehow my iTunes app has been put into the trash. How can I get this and all of the stuff that was in it back to my Application folder? I try to drag it out of trash, but it won't work.

Somehow my iTunes app has been put into the trash. How can I get this and all of the stuff that was in it back to my Application folder? I try to drag it out of trash, but it won't work.

Also, when I do try to drag it out of the Trash to put it back into Applications (on the Finder sidebar), it asks me to authenticate with the administration password. I enter it, and then a window appears saying that I can't do that because I do not have permission to modify iTunes. Please help.

After I synced my iphone to my home PC in outlook all of my calendar data moved to my computer and off my iphone. How can I get my calendar info back in my iphone?

After syncing my iphone to my Windows XP Outlook all of my calendar info went to my PC and is no longer on my iphone. How can I get the calendar info from my PC back to my iphone

Try restoring your device.

How can I get photos from my IPhone6 to automatically go to my IPad and Apple Mac computer

How can I get photos to automatically go to my IPad and Apple Mac Computer from my I Phone 6
Thank you,
jenjon63

This article describes the features of "My Photo Stream" and how to set it up in iCloud:
iCloud: Photo Stream FAQ

HT201302 Hi People! please help...I want to know how can i get photos from ipad to the computer, that were synchronized previously to ipad but from another pc that i dont have access anymore and these pics are now only found in this ipad and no other plac

Hi People!
Please help...I want to know how can i get photos from ipad to the computer, that were synchronized previously to ipad but from another pc that i dont have access anymore and these pics are now only found in this ipad and no other place.

Hi Alan,
Thanks for the help, but i've actually done that before.
It does not help, because it only shows the photos on the camera roll and do not show the photos synchronized with that pc that i dont have access anymore.
The photos/albums all appear on the ipad, i can see it without problems but i cant get them out of the ipad to save onto pc for backup.
And i reaaly need it, as it is the only place that i actually have these photos now...

I can log into my icloud account but i need to know my iPod security questions and answers.. How can i get them and see them???

I can log into my icloud account but i need to know my iPod security questions and answers.. How can i get them and see them???

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
(97586)

Iphone4 would not restore Error -50. I have tried to restore and it restored it to the point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out.

Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????

It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.

How can I get my books that I download from the Library that are WMA files into my I tunes so I can listen to them

How can I get my books that I download from the Library that are WMA files into my I tunes so I can listen to them. They have a ton of books but I can only listen to them from my windows media player and I wouldlove to download to my I pod but I have tried everything I can think of it they won't go over. Someone said all I had to do was copy them over and they would convert but I can't even get them to copy. Thanks.

Well it started happening AGAIN with my 2nd IPod. No matter what I did, it Itunes would NOT restore it!
I finally installed Itunes on my hubby's PC at work and managed to get it restored there.
Apparently, there must be some sort of compatibility issue with the windows version of Itunes and some other piece of software on my pc.
And one more important thing! I had to follow the instructions in the other thread that talks about how to correctly uninstall itunes and quicktime, in order to completely eliminate ALL traces of my "first" ipod's existence so it wouldn't demand that I restore it.
I think the software got "confused" and thought when I connected my 2nd ipod, that it was the 1st and that it still needed to be restored.
Basically, this is just POORLY written and POORLY tested software!

How can I get photo of callers to vshow full page since I just did the update it doesn't show but a thumbnail pic

How can I get photo of callers to vshow full page since I just did the update it doesn't show but a thumbnail pic

That is the design in iOS 7.1 and there isn't any way to change it. You can provide feedback to Apple if you want: http://www.apple.com/feedback/

How can I get my mail app to sync from my mac to iPhone, I don't have the 'info' option in iTunes?

How can i get my mail app to sync from my mac to iphone? i dont have the 'info' option in itunes!
I have created files within the mail app and want them to be the same on my mac and iphone.

You need a mail server that supports this then. Hotmail premium I believe does, but the free version does not. Gmail supports it, and any ISP that offers IMAP supports this capability. iCloud definitely supports it, so if you create a free iCloud email account and switch your primary email to it you would have this capability.

How can I get my materials back into EBP 5.5?

I have executed an initial replication of a single material into a clean EBP 5.5 (SRM 5.0) , i.e. no product master has ever existed
After changing MATERIAL filters in R3AC1 and afterwards replicating using R3AS I managed to get more materials into the EBP 5.5 but found out that my filter settings had to be changed. So i deleted all product master (COM_PRODUCT_DELETE_ALL) succesfully changed my filter and ran R3AS but no materials was replicated... I have checked SMQ1 and SMQ2 which were empty. I have even tried to go back to the starting point of replicating just the one material and still no luck (even synchronized filter with R/3). I have gone through a number of notes. I have gone into SMWP and there are some red lights but e.g. 'Adapter Status Information' and 'System Settings' looks fine.
How can I get my materials back into EBP 5.5? Is it a problem of changing filters and doing intial replications continuosly?
While writing the above I have just now created a new material in ECC 6.0 and set up the filter to replicate just this new material and it was succesfully replicated to EBP 5.5 with product master! I guess something has to be cleaned up before I can get my materials back into EBP 5.5??? How???

I managed to replicate all my materials with the broad range filter definition after working my way through all the errors in SMW01. However, I still don't understand why I couldn't make an initial replication of a single material (previously deleted)... anyway it is working now
Thanks for all the help!

Found an locked iphone5c, how can i get the owners info, email or anything if he/she only says "pls. bring back my phone.. godbless" on the activation menu??

found an locked iphone5c, how can i get the owners info, email or anything if he/she only says "pls. bring back my phone.. godbless" on the activation menu??

Try using Siri and ask "Who's phone is this?" It should give you the name, number, and email address of the owner. Also, you can try swiping to unlock, select Emergency, then see if they have a Medical ID set up. If they do, they may have the name of a contact with a phone number listed.

How can I get photo and info into contacts from photo

Similar Messages

Maybe you are looking for