How can I get the AirPlay information box to stop floating around my screen while looking at photos?

Thanks for answering
Well, the CS2 was my 1st full program that now my son is using in his new Laptop...
The CS4 Master Collection is my full program that I bought when I was in College course and now I use for my own works...
Both came in their own serial numbers and discs ... I install both completely to each computer but at the end on the registration asked for this "Validation code" and the message says that I can't do it on-line nor by mail; so to call to this phone 1-800-833-6687 and in there have the message to come to the "support " Adobe website and do all this going around.
Now I saw previously that page you send me... I really don't understand it ... I got CS2 installed but I just need the validation code to get rid of that 30 days message...
Why I have to uninstall it??? Could you explain me please..

Similar Messages

How can I get the disk information in Solaris 9

I am new to Solairs9. I use the format utility to list my partitions, but there are many unassigned partitions. I pasted the format response below:
# format
AVAILABLE DISK SELECTIONS:
0. c1t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@8,600000/SUNW,qlc@4/fp@0,0/ssd@w21000011c6413e10,0
Specify disk (enter its number): 0
format> partition
partition> print
Current partition table (original):
Total disk cylinders available: 14087 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 302 - 13482 63.96GB (13181/0/0) 134129856
1 swap wu 0 - 301 1.47GB (302/0/0) 3073152
2 backup wm 0 - 14086 68.35GB (14087/0/0) 143349312
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 home wm 13483 - 14086 2.93GB (604/0/0) 6146304
The part number from 3 to 6 are unassigned. What does this mean? How much space of these unassigned partitions? How can I mount these unassigned partitions to my local directories?
Thanks.

"+How can I get the disk information in Solaris 9+ "
This was cross-posted to the Solaris 9 forum as well.
http://forum.java.sun.com/thread.jspa?threadID=5223643

HT2589 Could you show me the full account information (account information)? How can I get the detail information that who charge me?

Could you show me the full account information (account information)? How can I get the detail information that who charge me?

I'm not entirely sure what you are asking, but you can view the purchase history on your account (and view your payment method) on your computer's iTunes : if you log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of your purchases. On your iPad you can only see a cut-down version via this page (which also allows you to contact iTunes Support if you have a problem with a purchase) : http://reportaproblem.apple.com
There are instructions on this page for managing and stopping auto-renewing subscriptions : http://support.apple.com/kb/HT4098
Or do you mean something else ?

How can I get the Task information..? Remedy for error "-200089"

Hello,
I am using PCI-6229 for the application, and VB6 for application development.
We have a policy to create the tasks and associated channels using Measurement and Automation Explorer.
I want to know can I retrieve the information of the tasks those are created ..
When my VB program starts, I use DAQmxLoadTask function to start executing the task, but for this I need to know the TASKNAME. On site if the service engineer accidentally renames the task name, the program stops execution. To avoid this problem, i would like to know how can I get the information about the tasks, such as the tasks those are created, their names, type of channels used (i/ps, o/ps, Analog channels), etc.
This would help my application to execute without hard coding the task names as well as I can close the tasks if they are running before exiting the application.
Also, while developing the application, it happens that the application crashes, and the tasks remain open and running. After I fix the error and execute the program, the application reports the error, "-200089 Task Name specified conflicts with an existing task name". To recover from this error, I need to restart the PC, which is most frustrating and time consuming. If I could know the tasks and task handles those are already created and running, I can safely delete them or continue using them.
I would appreciate if you could help me in resolving this problem.
Thank and regards,
Kunalb

Hi Kunalb,
To read the tasks currently configured on the system you can use this function: DAQmxGetSysTasks. This will return an array of the tasks on the system. In that same section of the DAQmx C Reference Help they talk about obtaining the other parameters you mention.
Another solution would be to add security to MAX such that only engineers with proper permissions could launch and/or modify the tasks. This can be done with Windows XP in the properties of a file.
I hope these suggestions help! Have a great weekend.
Best regards,
MatthewW
Applications Engineer
National Instruments
Message Edited by Matthew W on 08-10-2007 02:13 PM
Attachments:
DAQmxTasks.JPG ‏97 KB

How can I get the Airplay to appear on my iPhone 4S and iPad 2?

I have an iPad 2 and an iPhone 4S, and I have never seen the Airplay button that should appear on each device. I have checked wifi and it seems to works fine for printer and e-readers. Also, I have updated to the latest OS version as of this week. Is it possible to get to appear now? I want to use iPad in my classroom, so I need this feature to function. Thanks!

The Airplay icon only appears if there's an Airplay enabled device that the iPhone or iPad can find in the same network, or connected via bluetooth.
How are you attempting to use Airplay?

How can I get the rotation information of my wrists in Kinect for Windows v2 ?

Hi,all
Assuming we make human wrist as the coordinate origin point of a three-dimensional space Cartesian coordinate, then when moving the wrist freely, what is the wrist rotation information in the coordinate system? Can kinect V2 describe it just like the degree
of roll, pitch and yaw in Face Basics demo given in the V2 SDK Browser?
Based on Kinect Studio 2.0 on 3D View model, it gives a vector arrow at each joint in real time, when I move, the direction of arrows changes correspondingly. So I think this may help me to get the information I want.
Here are my questions:
1. Could I use Kinect V2 SDK to detect and output this information directly? If not, any suggestion to use the data which SDK output to get rotation information?
2. If the Q1 answer is yes, what is the accuracy of the sensor about the degree of roll, pitch and yaw on wrist?
3. I have read Kinect V2 SDK documentation about the body class, the JointOrientations property description says that "the joint orientations of the body", what I want to know is the joint orientation based on
what frame of reference? The specific value of body.JointOrientations looks what kind of data?
Any advise or guidance would be greatly
appreciated.

Thanks Carmine. It's really helps. But I still have some questions to ask.
As you said "a quaternion value, where the
Y component rotation is around the direction vector from the parent",and you also said "The
orientation value is ...not the rotation from the parent",my English is poor so I am a little bit confused.
About the accuracy, What is the level of accuracy under ideal conditions?
And in what circumstance
that "value could be 180 rotated" thing could happen?
Thank you for your time

How can I get the iTunes 1 page to stop popping up on my computer every 2 minutes?

Ever since I set up iTunes to synch with my IPad I get the iTunes page popping up on my computer every 2 minutes. It's very annoying. Can anyone tell me how to stop it?

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

How can I get the BPM information to populate for the songs in my iTunes library?

I'm trying to create playlists for my Aquatics classes as well as for walking. Is there something that needs to be set in iTunes? Do I need to purchase additional software?

iTunes does not measure BPM, so you'll either need to type in the information yourself or use a third-party product to determine the BPM. If you search MacUpdate for "BPM", you'll find a few such utilities, though the automatic utilities are in my experience often not particularly accurate.
Regards.

How can I get the Auto Brightness feature to stop turning itself off?

I just moved from a GS5 to the GS6. I'm having several issues with the GS6. For this discussion: I check the box for Auto Brightness control. Shortly thereafter, the box seemingly un-checks itself and the brightness blasts up. That's not easy to read and it certainly will deplete my battery charge more quickly. Have I missed something? Thanks for any and all help.@

Thank you! I removed The Car/Driving app and the Auto Brightness function
has been behaving for almost 1/2 hour now. That's a record! I appreciate
your help!!!

I just pressed the wrong button to erase of my IMac, how can I get back all information from my computer ?

I just pressed the wrong button to erase of my iMac, how can i get back all information ?

Possibly through a data rescue service (can cost a four-figure amount) if you didn't have an external backup.
But you must stop using that Mac immediately, or your data will be over-written.

How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size?

How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size? I would like them to open at the size they were previously resized like they used to in previous operating systems. They currently open at a very small size and the first colum is only a few letters wide necessitating a resize practically every time one wants to use it. Any help would be appreciated.

hi Prasanth,
select werks matnr from ZVSCHDRUN into table it_plant.
sort it_plant by matnr werks.
select
        vbeln
        posnr
        matnr
        werks
        erdat
        kbmeng
        vrkme
        from vbap
        into table it_vbap
        for all entries in it_plant
        where matnr = it_plant-matnr and
              werks = it_plant-werks.
and again i have to write one more select query for vbup.
am i right?

My iphone is broken,and i came to store to change a new one today. When I come home, I found I lost my backup and may be mistake is made during before backup.The information in my previous iphone is really important for me? how can I get the backup back?

my iphone is broken,and i came to store to change a new one today. When I come home, I found I lost my backup and may be mistake is made during before backup.The information in my previous iphone is really important for me? how can I get the backup back?

If you don't have a backup then the only possible solution is to go back to the store and see if they can get your old phone and create a backup of that. I know very often that Apple employees will wipe the returned iPhones clean before shipping them back to wherever they ship them.
When you say your old phone was "broken" does this mean it is dead and won't turn on?
Do you have a Time Machine backup of your computer, or a clone that might have this info on it?
Other than that I hate to say you may be out of luck. Time Machine and/or a cloning program performed regularily will inevitably save your a** in situations like this.
Good luck
PM

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date is created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD

How can you get the mail boxes in yahoo onto the e.mail app

How can you get your yahoo mail boxes onto the e.mail app on an IPad mini?

Go to the Settings App
Pick Mail, Contacts, Calendars
On the right side you'll see under the Mail section "Add Account”
Pick that and fill out the requested information

I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9. I can not get all the track to play with internal instrument sounds... only the piano track. how can I get the others to play... drums, bass etc???? Help

I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9. I can not get all the track to play with internal instrument sounds... only the piano track. how can I get the others to play... drums, bass etc???? Help

Don't drag the midi into an open Logic project. The tracks won't set up correctly.
'Open' the midi file with Logic as if it were a Logic project. Then all the tracks will be set up so you can start editing them and applying better saved sounds and instruments, but you'll be at a starting place where you can hear what's going on.

How can I get the AirPlay information box to stop floating around my screen while looking at photos?

Similar Messages

Maybe you are looking for