How can I get the disk information in Solaris 9

I am new to Solairs9. I use the format utility to list my partitions, but there are many unassigned partitions. I pasted the format response below:
# format
AVAILABLE DISK SELECTIONS:
0. c1t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@8,600000/SUNW,qlc@4/fp@0,0/ssd@w21000011c6413e10,0
Specify disk (enter its number): 0
format> partition
partition> print
Current partition table (original):
Total disk cylinders available: 14087 + 2 (reserved cylinders)
Part Tag Flag Cylinders Size Blocks
0 root wm 302 - 13482 63.96GB (13181/0/0) 134129856
1 swap wu 0 - 301 1.47GB (302/0/0) 3073152
2 backup wm 0 - 14086 68.35GB (14087/0/0) 143349312
3 unassigned wm 0 0 (0/0/0) 0
4 unassigned wm 0 0 (0/0/0) 0
5 unassigned wm 0 0 (0/0/0) 0
6 unassigned wm 0 0 (0/0/0) 0
7 home wm 13483 - 14086 2.93GB (604/0/0) 6146304
The part number from 3 to 6 are unassigned. What does this mean? How much space of these unassigned partitions? How can I mount these unassigned partitions to my local directories?
Thanks.

"+How can I get the disk information in Solaris 9+ "
This was cross-posted to the Solaris 9 forum as well.
http://forum.java.sun.com/thread.jspa?threadID=5223643

Similar Messages

HT2589 Could you show me the full account information (account information)? How can I get the detail information that who charge me?

Could you show me the full account information (account information)? How can I get the detail information that who charge me?

I'm not entirely sure what you are asking, but you can view the purchase history on your account (and view your payment method) on your computer's iTunes : if you log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of your purchases. On your iPad you can only see a cut-down version via this page (which also allows you to contact iTunes Support if you have a problem with a purchase) : http://reportaproblem.apple.com
There are instructions on this page for managing and stopping auto-renewing subscriptions : http://support.apple.com/kb/HT4098
Or do you mean something else ?

How can I get the AirPlay information box to stop floating around my screen while looking at photos?

How can I get the AirPlay information box to stop floating around my screen while looking at photos?

Thanks for answering
Well, the CS2 was my 1st full program that now my son is using in his new Laptop...
The CS4 Master Collection is my full program that I bought when I was in College course and now I use for my own works...
Both came in their own serial numbers and discs ... I install both completely to each computer but at the end on the registration asked for this "Validation code" and the message says that I can't do it on-line nor by mail; so to call to this phone 1-800-833-6687 and in there have the message to come to the "support " Adobe website and do all this going around.
Now I saw previously that page you send me... I really don't understand it ... I got CS2 installed but I just need the validation code to get rid of that 30 days message...
Why I have to uninstall it??? Could you explain me please..

How can I get the Task information..? Remedy for error "-200089"

Hello,
I am using PCI-6229 for the application, and VB6 for application development.
We have a policy to create the tasks and associated channels using Measurement and Automation Explorer.
I want to know can I retrieve the information of the tasks those are created ..
When my VB program starts, I use DAQmxLoadTask function to start executing the task, but for this I need to know the TASKNAME. On site if the service engineer accidentally renames the task name, the program stops execution. To avoid this problem, i would like to know how can I get the information about the tasks, such as the tasks those are created, their names, type of channels used (i/ps, o/ps, Analog channels), etc.
This would help my application to execute without hard coding the task names as well as I can close the tasks if they are running before exiting the application.
Also, while developing the application, it happens that the application crashes, and the tasks remain open and running. After I fix the error and execute the program, the application reports the error, "-200089 Task Name specified conflicts with an existing task name". To recover from this error, I need to restart the PC, which is most frustrating and time consuming. If I could know the tasks and task handles those are already created and running, I can safely delete them or continue using them.
I would appreciate if you could help me in resolving this problem.
Thank and regards,
Kunalb

Hi Kunalb,
To read the tasks currently configured on the system you can use this function: DAQmxGetSysTasks. This will return an array of the tasks on the system. In that same section of the DAQmx C Reference Help they talk about obtaining the other parameters you mention.
Another solution would be to add security to MAX such that only engineers with proper permissions could launch and/or modify the tasks. This can be done with Windows XP in the properties of a file.
I hope these suggestions help! Have a great weekend.
Best regards,
MatthewW
Applications Engineer
National Instruments
Message Edited by Matthew W on 08-10-2007 02:13 PM
Attachments:
DAQmxTasks.JPG ‏97 KB

How can I get the rotation information of my wrists in Kinect for Windows v2 ?

Hi,all
Assuming we make human wrist as the coordinate origin point of a three-dimensional space Cartesian coordinate, then when moving the wrist freely, what is the wrist rotation information in the coordinate system? Can kinect V2 describe it just like the degree
of roll, pitch and yaw in Face Basics demo given in the V2 SDK Browser?
Based on Kinect Studio 2.0 on 3D View model, it gives a vector arrow at each joint in real time, when I move, the direction of arrows changes correspondingly. So I think this may help me to get the information I want.
Here are my questions:
1. Could I use Kinect V2 SDK to detect and output this information directly? If not, any suggestion to use the data which SDK output to get rotation information?
2. If the Q1 answer is yes, what is the accuracy of the sensor about the degree of roll, pitch and yaw on wrist?
3. I have read Kinect V2 SDK documentation about the body class, the JointOrientations property description says that "the joint orientations of the body", what I want to know is the joint orientation based on
what frame of reference? The specific value of body.JointOrientations looks what kind of data?
Any advise or guidance would be greatly
appreciated.

Thanks Carmine. It's really helps. But I still have some questions to ask.
As you said "a quaternion value, where the
Y component rotation is around the direction vector from the parent",and you also said "The
orientation value is ...not the rotation from the parent",my English is poor so I am a little bit confused.
About the accuracy, What is the level of accuracy under ideal conditions?
And in what circumstance
that "value could be 180 rotated" thing could happen?
Thank you for your time

How can I get the BPM information to populate for the songs in my iTunes library?

I'm trying to create playlists for my Aquatics classes as well as for walking. Is there something that needs to be set in iTunes? Do I need to purchase additional software?

iTunes does not measure BPM, so you'll either need to type in the information yourself or use a third-party product to determine the BPM. If you search MacUpdate for "BPM", you'll find a few such utilities, though the automatic utilities are in my experience often not particularly accurate.
Regards.

Please for referral information, how can I get more disk space, or actually information and guidelines that can have enough free disk space. How, I have to delete documents or downloading to another drive.

Please for referral information, how can I get more disk space, or actually information and guidelines that can have enough free disk space. How, I have to delete documents or downloading to another drive. (The problem is that Safari could not download the file "iTunesSetup.exe" because there is not enough free disk space.Try deleting documents or downloading to another drive) ... Perhaps this is the main problem why can not open iTunes and inscription is: the folder "iTunes" can not be found or created, and is required. The default location for this folder is inside the "Music" folder. - And after options ok, appears option: Choose iTunes Library with inscription iTunes needs a library to continue. You may choose an existing iTunes library or create a new one - but still following options Choose Library and the following options can not open iTunes ... Please for instructions on how to eliminate the problem or eror ...
Mac is running OS X v10.6.8, Safari should be 5.1.10. Or Mac OS X / Version 10.6.8 / Build 10K549 / Serial Number W8****ATM / Processor 2.4 GHz Intel Core 2 Duo / Memory 4 GB 1067 MHz DDR3 or More Info:
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2,4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1,07 GHz
Boot ROM Version: MBP71.0039.B0B
SMC Version (system): 1.62f7
Serial Number (system): W80394HFATM
Hardware UUID: 94647506-C5D0-5D73-BC7F-FC680D238F43
Sudden Motion Sensor:
State: Enabled
<Personsl Information Edited by Host>

buy an external HD 1TB for $60
NO notebook is a mass storage device, so dont try to turn it into one, it doesnt work that way.
Unless youre using it every couple weeks, its static data and should be on an external HD
In the case of a Macbook Air or Macbook Pro Retina with ‘limited’ storage on the SSD, this distinction becomes more important in that in an ever rapidly increasing file-size world, you keep vital large media files, pics, video, PDF collections, music off your SSD and archived on external storage, for sake of the necessary room for your system to have free space to operate, store future applications and general workspace. You should never be put in the position of considering “deleting things” on your macbook SSD in order to ‘make space’.
Professionals who create and import very large amounts of data have almost no change in the available space on their computers internal HD because they are constantly archiving data to arrays of external or networked HD.
Or in the case of the consumer this means you keep folders for large imported or created data and you ritually offload and archive this data for safekeeping, not only to safeguard the data in case your macbook has a HD crash, or gets stolen, but importantly in keeping the ‘breathing room’ open for your computer to operate, expand, create files, add applications, for your APPS to create temp files, and for general operation.

I just pressed the wrong button to erase of my IMac, how can I get back all information from my computer ?

I just pressed the wrong button to erase of my iMac, how can i get back all information ?

Possibly through a data rescue service (can cost a four-figure amount) if you didn't have an external backup.
But you must stop using that Mac immediately, or your data will be over-written.

My iphone is broken,and i came to store to change a new one today. When I come home, I found I lost my backup and may be mistake is made during before backup.The information in my previous iphone is really important for me? how can I get the backup back?

my iphone is broken,and i came to store to change a new one today. When I come home, I found I lost my backup and may be mistake is made during before backup.The information in my previous iphone is really important for me? how can I get the backup back?

If you don't have a backup then the only possible solution is to go back to the store and see if they can get your old phone and create a backup of that. I know very often that Apple employees will wipe the returned iPhones clean before shipping them back to wherever they ship them.
When you say your old phone was "broken" does this mean it is dead and won't turn on?
Do you have a Time Machine backup of your computer, or a clone that might have this info on it?
Other than that I hate to say you may be out of luck. Time Machine and/or a cloning program performed regularily will inevitably save your a** in situations like this.
Good luck
PM

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date is created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD

I have a Mac Pro OS 10.7.5 and have a DVD+R disc with files on it, but it ejects the disk after about 10 seconds--what to do? How can I get the data off this disc? I can see it has been already burned, so files are on there?

I have a Mac Pro OS 10.7.5 and have a DVD+R disc with files on it, but it ejects the disk after about 10 seconds--what to do? How can I get the data off this disc? I can see it has been already burned, so files are on there?

Try cleaning the lens and see if that will restore functionality to the DVD drive. Use a DVD lens cleaning disk, if you have a can of compressed air, shoot some into the slot or wrap a fine microfiber cloth (eyeglasses cleaning cloth) around a business card and insert it gently inside the slot.
If no success, make an appointment at an Apple store genius bar and get a free diagnosis from them.
Ciao.

I can't change any information for any songs in my library, everything is just greyed out. How can I get the ability to edit my song information?

I can't change any information for any songs in my library, everything is just greyed out. How can I get the ability to edit my song information?

I found one other way to do it. I just deleted them all out of my iTunes library. Now I can re-import them from Window's My Music file with the original artists' names intact.
Thanks for your help, Matt!

I synced firefox information to the servers and exchanged my laptop. How can I get the new laptop to sync with my firefox data?

I want to get my firefox sync data on my laptop. However, I haven't paired this device, I just have my information on the firefox servers under my account. How can I get the sync info on this new laptop?

If you don't have a 2nd device available which is already setup with your Sync account, pairing can't be done.
In order to set up a '''new device''' when you can't "pair", you need three things; the user account name ''(email address used)'', the password for the account, and the '''Sync Key'''.
If you didn't make a copy of the Sync Key as prompted at the end of the Sync set up process, you can't successfully setup a new device and won't be able to recover your data.

How can I get the photos from iPhoto copied to a disk in the order I want?

How can I get the photos from iPhoto copied to a disk in the order I want??

To ensure a custom ordering, sort the files in an album and rename the files with a sequentially numbered filename.
File > Export > Version/Originals
Then use "Filename > Sequential"
or "Filename > Album name with index"

How Can I Get the Amount of Free Disk Space Using space using windows 7 please share example using GetDiskSpace

How Can I Get the Amount of Free Disk Space using windows 7 please share example using GetDiskSpace i have already studied http://digital.ni.com/public.nsf/allkb/9958B8E473C4EF1786256BBC0053B64F

Reading your question a bit more in detail, I doubt whether you are using Win32 API GetDiskFreeSpace function (for which my previous post is the solution) of Programmer's Toolbox GetDiskSpace function.
With reference to the second one, it works even with disks larger than 2GB but you need to use the proper formatting code to display the returned value. I updated my example to show total free space in the debug output window and added a comparison with 3GB value using UInt64TypeCompareUInt from the Programmer's Toolbox.

How can I get the disk information in Solaris 9

Similar Messages

Maybe you are looking for