How can I get the right click to work in firefox -- it works in internet explorer

how can I get the right click to work in firefox -- it works in interne

Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

Similar Messages

  • I downloaded bundle for ms office only to realise its just a template.my questions are can i be refunded and how can i get the right msoffice because am in need of it badly

    i downloaded bundle for ms office only to realise its just a template.my questions are can i be refunded and how can i get the right msoffice because am in need of it badly

    You can request a Mac App Store refund at reportaproblem.apple.com
    You can buy Microsoft Office at office.microsoft.com

  • HT4759 how can i get the right version to install icloud on my mac

    how can i get the right version to install icloud on my mac

    Open the Mac App Store and buy Mountain Lion.
    (90636)

  • How can I modify the "right click" menu of a table control?

    Hello,
      How can I modify the "right click menu" of a table control. I would like to be able to remove the ability to add or delete columns and maybe other selections. I want to keep the ability to
    add or delete rows

    Hi Andy,
    Dialog & User Interface VIs -> Menu functions
    Never used them, eh?

  • Inside the browser, right click on the mouse seems to be disabled. How can I enable the right click button? It works fine on toolbars and tab bar but not inside tabs or windows. I would like to be able to copy and paste and such. Thank you

    Right mouse button does not open any menu when clicked inside of tabs or windows. Works properly on the toolbars, in the address line, search bar...etc. but has no action on the page I'm browsing. I purchased a mouse recently and like the old one, the right button works in all other areas of my operating system. I would like to know if there is a setting in firefox that I can change to correct this.

    There are also websites that can disable the right-click context menu.
    See Tools > Options > Content : JavaScript > Advanced > Allow Scripts to:
    [ ] "Disable or replace context menus"
    There are other things that need attention:
    Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
    *Shockwave Flash 10.0 r42
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/

  • Convert a catalog form PSE 7 to PSE 13 : Conversion works, but images are not related to the catalog anymore so you have to connect each single picture !!! How can I get the right relation automatically ?

    My images are not related to the converted catalog, only preview works, tags and other information is given, but the (network) path to the original images is missing and is substituted by a local path with c:\. How can I solve the problem automatically ?

    I actually need to apply this to at least a couple different layouts. Two exampled below (The outlined boxes are text areas, the black boxes where the product images will go.)
    I prefer InDesign5, but I have 6 too.

  • I'm embarrassed to ask this: when I click to initiate a new email message in the "From" box it automatically chooses the wrong email address (I have three but use one mainly). How can I get the right choice to appear automatically?

    I'm embarassed to ask this: when I click on the new mail icon to write a new email message, in the box "FROM" appears the wrong email address: I have three but mainly use one. How can I correct this so that the right email address appears in the "FROM" box?

    I assume this is Apple Mail. Try this:
    Preferences > Accounts > your-first-account
    Select Outgoing Mail Server of account/name you wish to use and check Use only this server
    Repeat for other accounts.

  • How can i get a right-click click box to work?

    I am using Captivate 7 and to accurately mimic the software I have inserted multiple right-click click boxes but without success. After reading previous posts, I have tried the following:
    - publishing to SWF and HTML5
    - publishing to the default folder and launching the HTML from there (i can see .css and .js files in the folder as well)
    - unchecking "Enable Accessibility" in Publish Settings
    I'm very new to Captivate so any help or advice you can give on this would be great.
    Thanks
    bianca

    Read this post about Flash Global Security:
    http://www.infosemantics.com.au/adobe-captivate-troubleshooting/how-to-set-up-flash-global -security
    Not having the publish folder location set up as a trusted location can also cause right click to fail.

  • How can I get the previous clicked node in a Tree?

    I have a JTree. If a node is selected, before the user select another, I need to make a question if he have sure about the new selection.
    If the user answers not, I need to select the previous node.
    I have in my class a variable, type of DefaultMutableTreeNode, that makes reference to the last node selected.
    How can I turn this node selected again, if the user select "No"?
    Thanks for any help.
    Renato de Melo

    You don't want to maintain a reference to the last selected node, but to the last selected path. Nodes within a tree are addressed using a TreePath, with contains references to each node from the root, down to a specific node. Look at the JavaDocs of javax.swing.tree.TreePath for more info.
    Also, JTree has getter/setter methods for the selectionPath.

  • I can't get the right click to bring up settings

    I am so frustrated.  this is my tenth time at this page because you keep sending me all over the place.  I have followed the directions for disabling the hardware acceleration because all of my videos are showing in green screen.  When I right click, it only gives me "about adobe"  It is EXTREMELY frustrating.  I am ready to take my computer somewhere and have this player taken off because I can't watch ANYTHING because of this, and your instructions DON'T WORK.  I need to know where I can go in MY computer to change the settings of this program before I lose my MIND.  I have been at this over an hour and your site is just an exercise in frustration!

    Sorry you're frustrated.
    Please disable hardware acceleration using the steps outlined here (Step 1 under Solve Video Playback issues):
    https://helpx.adobe.com/flash-player/kb/video-playback-issues.html
    If you're using Internet Explorer on Windows 8 or higher, follow these instructions instead:
    https://support.microsoft.com/en-us/kb/2528233
    If you're still stuck, please follow the directions in the guide on providing the dxdiag report and additional information about what you tried and saw.

  • Hey i bought a new iPad, synchronized it with my old laptop, now bought a mac computer an lost the rights to put photos onto the iPad! how can i get the rights back?? HELP, please!!!

    hey i just bought this new ipad, am really fond of it, but first time i synchronized it, i did so by using my old windows laptop. now i bought a mac computer and lost the rights to put photos onto my i pad. how am i able to get my rights back and go an putting photos and pictures on my ipad??
    i'm not that good at working with computers , so please help me....
    Lisa

    Welcome to Apple Communities.
    You need to migrate some files to your Mac using Windows Migration Assistant. Migrate your Music folder and the folder with the photos. Then, in your Mac, you will have iTunes as you have in your old computer. After that, open iPhoto and drag the photos to it. Finally, connect your iPad to your Mac and sync it

  • How can I edit the right-click context menu?

    I seem to have two entries for every Adobe product when I right-click a file and choose "Open With..." Is there a way to either clean it out automatically, or fix this myself?
    ...Mike

    Could be caused by several things I believe.
    You have already checked you have only one application folder with one Adobe
    app for each in it on your Disk?
    Also look in the preferences in Bridge under file type associations for the
    given extensions, do they also show double applications?
    Try first to refresh preferences with restart Bridge holding down option
    key, it is the first aid for Bridge and curing many problems.
    Also use Disk Utility to check and repair permissions for your OS.
    I seem to have two entries for every Adobe product when I right-click a file
    and choose "Open With..." Is there a way to either clean it out automatically,
    or fix this myself?

  • Can't get the right-click option to work on Quicktime

    While using Firefox, I right-clicked on a quicktime video/song, and a small box with options appeared. I accidentally clicked on the wrong thing and now when I right-click on a quicktime video/song nothing pops up. I tried uninstalling quicktime and reinstalling but that didn't work. Any suggestions?

    The brush tool usually applies a calligraphy brush automatically, but this type of brush is not supported by variable width profiles

  • How can i perform the right click and double click operation in ipad.

    I have an email application i.e web application working fine in desktops, in that application if i will double click on the mail that mail will be open, and after opening that mail if i will right click on the mail it will show the different functionality .
    But i cant do that in ipad, is there solution to this problem ????

    mm.thejeshwini wrote:
    That application is a web-based application and the desktop version of the application has the functionality to open or pop-up a new window when double clicked on a particular text and now i want the same functionality to be performed on ipad. And some functionality to be worked for right-clicked also.
    I understand what you have and what you want. However, the iPad is not a desktop computer. What you want may not be possible. The developer may have already created an app specifically for the iPad. Have you checked the App Store?

  • How do I get the right-click-on-tab - "Bookmark all tabs" to put the bookmarks in a folder of my choosing without creating a subdirectory named "[Folder Name]

    Every time I create a new folder, say on the bookmarks toolbar, like "REOPEN 6-13-14" and use the "Bookmark all Tabs" function to create bookmarks to reopen later, it creates a sub directory in the new folder called [Folder Name]. If I have 4 windows open with multiple tabs and do this, it creates 4 separate [Folder Name] folders in the "REOPEN...." folder. Really want to just add all bookmarks into one big folder to reopen later.

    If you use "Bookmarks All Tabs" then Firefox will always create a new folder with the name that you specify in the location that you specify.
    If you do not change the default name then it keeps [Folder Name] for its name.
    This also happens if there is already a folder with the same name and you thus get multiple folders with the same name.

Maybe you are looking for