How can I get the selected rows from two ALV grids at the same time?

I have a program that uses two ALV grids in one dialog screen. I'm using the OO ALV model (SALV* classes).
The user can select any number of rows from each grid. Then, when a toolbar pushbutton is pressed, I'd have to retrieve the selected rows from both grids and start some processing with these rows.
It is no problem to assign event handlers to both grids, and use the CL_SALV_TABLE->GET_SELECTIONS and CL_SALV_SELECTIONS->GET_SELECTED_ROWS methods to find out which rows were marked by the user. Trouble is, this only works when I raise an event in each grid separately, for instance via an own function that I added to the grid's toolbar. So, I can only see the selected rows of the same grid where such an event was raised.
If I try to do this in the PBO of the dialog screen (that contains the two grids), the result of CL_SALV_SELECTIONS->GET_SELECTED_ROWS will be empty, as the program does not recognize the marked entries in the grids. Also, an event for grid1 does not see the selected rows from grid2 either.
As it is right now, I can have an own button in both grid's toolbar, select the rows, click on the extra button in each grid (this will tell me what entries were selected per grid). Then, I'd have to click on a third button (the one in the dialog screen's toolbar), and process the selected rows from both grids.
How can I select the rows, then click on just one button, and process the marked entries from both grids?
Is it somehow possible to raise an event belonging to each grid programmatically, so that then the corresponding CL_SALV_SELECTIONS->GET_SELECTED_ROWS will work?
Thanks.

Hello Tamas ,
If I try to do this in the PBO of the dialog screen (that contains the two grids), the result of CL_SALV_SELECTIONS->GET_SELECTED_ROWS will be empty, as the program does not recognize the marked entries in the grids. Also, an event for grid1 does not see the selected rows from grid2 either.--->
is it possible to have a check box in each grid & get the selected lines in PAI of the screen ?
regards
prabhu

Similar Messages

How can I get a birthday reminder from items which are in the read-only cal

I am looking for a solution to get a reminder message for birtdays which are within the read-only calender imported/updated from he address book. I so far have not found the option where to turn on the reminder and I do not want to duplicate items (ie creating another birthday calender inside iCal).
Thanks for comments.
PB G4 Ti, 1GHz, 10.2.8 Mac OS X (10.4.7)

Hi ontour,
This limitation is one of the many reasons I wrote Dates to iCal. It is a replacement for the Birthdays calendar in iCal, so you would need to turn the Birthdays calendar off in iCal's preferences.
See here: http://discussions.apple.com/thread.jspa?threadID=466478
Best wishes
John M

How can I get Directory and Files from a Maped Networkdrive of the AppS

Hello,
we have the following Situation.
We have a Windows-Server (Server-A) in an Network with ActivDirectory and an Windows-Server (Server-B with an WebApplicationServer outside of these ActivDirectory as standalone.
On Server-B we mapped a Directory from Server-A (FileExplorer and then MapNetworkDrives) as Drive Q.
Now i tried to get the Directory of Q:\abcd but it doesn't work.
I tried the FM EPS_GET_DIRECTORY_LISTING and also RZL_READ_DIR, but both doesn't worked.
RZL_READ_DIR is doing a "CALL 'ALERTS' ..." and is comming back with sy-subrc = 1
EPS_GET_DIRECTORY_LISTING is doing a "CALL 'C_DIR_READ_FINISH'..." and comes back with "Wrong order of calls" in the Field file-errmsg. Next Call is "CALL 'C_DIR_READ_START'..." and this comes back with "opendir" in Field file-errmsg.
I tried the same with two Servers in the same ActivDirectory-Network. The Result was the same, i don't get the directory of the mapped drive. But now i get from the Call "CALL 'C_DIR_READ_START'..." the file-errmsg "opendir: Not a directory" and file-errno 20.
Is there any idea for solving my Problem?
I have to get this directory, read the files from the List and have to rename them after wriing the data to our databasefile.
I want to read them with OPEN DATASET, rename them by writing a new File (also OPEN DATASET) and after that i do an DELETE DATASET.
Thanks and Greetings Matthias
Edited by: Matthias Horstmann on Mar 25, 2009 4:12 PM
Filled in Scenario with 2 Servers in same AD-Network

Halo Mattias,
i using this function get file file name and directory:
at selection-screen on value-request for p_file.
call function 'F4_FILENAME'
    exporting
      program_name = syst-cprog
      dynpro_number = syst-dynnr
      field_name    = 'P_FILE'
    importing
      file_name     = p_file.
Rgds,
Wilibrodus

HT4623 how can i get my contact back from my old iPhone to the new iphone

my iphone broke i buy a new one and i dont know how to get my contacs back and picture / videos

did you have a backup of the old phone and do you still have it?

How can I see My Photo Stream from two Macs associated with the same Apple ID?

I have a MacBook Pro (my personal machine) and an iMac (our family computer).
The iPhoto library housing all of our family photos lives on the iMac.
The iPhoto library on my MacBook Pro is currently empty.
I have an account on both machines. I have associated the same Apple ID with both machines.
When I launch iPhoto on my MacBook Pro and attempt to turn on photo sharing (so that I can see My Photo Stream, as well as other shared streams), iPhoto informs me that "iCloud Photos for xxx@xxx is being used with another library named 'iPhoto Library'."
My iPhone, which is also affiliated with the same Apple ID, shows the streams just fine.
What can I do to remedy this situation? I'd like to be able to view my shared streams on my MacBook Pro, while leaving the actual massive photo library on the iMac.

I found out about this issue when I created a new library with some photo's I wanted to sync to my iCloud account. I found the following on the Fat Cat Software page and thought it might be helpful to others:
Using Photo Stream with multiple libraries
Starting in iPhoto 9.2, Apple introduced a new feature called Photo Stream, which lets you automatically transfer photos via their iCloud service between your iPhoto library and your other devices such as an iPhone, iPad, or another Mac. This feature works when you have multiple iPhoto libraries set up, but there are a couple things to be aware of.
First, iPhoto will only allow Photo Stream to be active in one iPhoto library at any given time. If you've already enabled Photo Stream in one library, but then open a second library and enable Photo Stream there, this will cause Photo Stream to be turned off in the first library.
Any photos downloaded by Photo Stream are actually stored in an entirely separate location from any of your iPhoto libraries. This means that, even if you do switch Photo Stream from one library to another, you will not need to go through redownloading all the photos you already have in Photo Stream back from the iCloud servers. So, switching Photo Stream from one library to another is a relatively inexpensive operation, so you can do it as often as needed without it being much of a hassle.

How can I get my photos back from icloud

How can I get my photos back from my iPhone 4 on the icloud I got my music and my contacts but for some reason I can not get my photos.

Hi sadie,
When you did the backup, were the 1500 pictures all on your camera roll? Or were they on other Albums?
iCloud is not a storage device for your photos. You should be importing them to a computer or uploading them to a cloud storage facility like DropBox or Flickr.
Each time you do a backup of to iCloud, it creates a backup of what is on your phone at that moment in time. So, if you had some photos on one backup, but not the other, you would only be able to "recover" the photos from one of those backups. Photos in iCloud are not aggregative.
Also, the iCloud backup of photos only includes those photos or videos in the Camera Roll. Photos in any other album are not backed up:
http://support.apple.com/kb/PH12519?viewlocale=en_US
If you had PhotoStream turned on, then the last month's-worth of PhotoStream, or the last 1000 PhotoStream photos would also still be viewable.
Can you tell us where those 1500 photos were located when you did your backup?
Sorry that you lost your photos. Take a look at DropBox in the App Store, or check out Flickr. If you aren't importing your photos on a regular basis to a computer, then these would be your best bet to protect your photos going forward.
GB

Getting the Selected Row from a JTable

hi,
how Can i get the Selected row from a JTable
thanks...

You know that JTable class? Well, you see those methods in it called "getSelectedRow()" and "getSelectedRows()"...?

My computer crashed and I lost everything. It was the only computer with Sync on it and I cannot get my recovery key: how can I get all my bookmarks from that Sync account?

My computer crashed and I lost everything. It was the only computer with Sync on it and I cannot get my recovery key: how can I get all my bookmarks from that Sync account? I have a ton of bookmarks/saved password and the only way to get on sync is create a new recovery key and lose all of my information.
Is there any way to get my stuff back without creating a new recovery key and losing all my old stuff?

It has always been very basic to always maintain a backup copy of your computer for just such an occasion.
Use your backup copy to put everything back.

How can i get HD video out from the lumia 900. ? ...

How can i get HD video out from the lumia 900. ? Is there some kind of gable. ? N8 has HD cable port..so where is lumia`s port. ?

Download Zune and start it, when started connect your Lumia 900 and you can now transfer mediafiles from the Lumia to your PC through a USB connection. For Mac use the Mac connector.
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

I was charged for a movie that never was downloaded, i asked for it but the conection was too slow and I never was able to have the movie that i asked for...how can i get it without being charged again, who could remove the chage from my Crecit card?

i was charged for a movie that never was downloaded, i asked for it but the conection was too slow and I never was able to have the movie that i asked for...how can i get it without being charged again, who could remove the chage from my Crecit card?

You may not be able to get a refund, since the terms of sale for the iTunes Store state that all sales are final. You can contact the iTunes Store, explain the reason for your request, and ask, though:
http://www.apple.com/support/itunes/contact.html
It's possible they'll make an exception for you, particularly if the problem was on their end preventing the movie from downloading in a reasonable time.
Good luck.

How Can I get multi column values from dynamic search help?

Hi Gurus;
I'm using dynamic search help in my program.
I want to get multi column values from search help. But I dont know solution for this issue.
I'm using F4IF_INT_TABLE_VALUE_REQUEST FM.
How Can I get multi column values from dynamic search help?
Thanks.

Believe it or not, the same FM worked for me in a dynpro. I will try to explain here how it works in custom screen and then you can do your work for other screens or program types. I am not going to write my actual work but will explain in general.
I have 4 fields (FLD1, FLD2, FLD3, FLD4) and i made the search based on FLD2 and when user click on a line (could be any field), then this would bring the line on to the screens.
There are like 3 steps.
You have your value_tab for my fields FLD1, FLD2, FLD3 and FLD4. This is just the data that we pass into the FM. (data: IT_VALTAB type table of ZVAL_TABLE)
Next map the screen fields into an internal table (data: It_dynpfld type table of dselc ). I also have other internal tables defined (just to keep it straight, i will be putting here) data: It_return type standard table of ddshretval.
Next step is to call the function module. Make sure you have values in IT_VALTAB.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
exporting
        retfield        = 'FLD2'
        value_org       = 'S'
      tables
        value_tab       = It_VALTAB
        return_tab      = It_return
        dynpfld_mapping = It_dynpfld
      exceptions
        parameter_error = 1
        no_values_found = 2
        others          = 3.
    if sy-subrc <> 0.
      message id sy-msgid type sy-msgty number sy-msgno
      with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    else.
      perform get_selected_fields tables It_return.
    endif.
The code within the perform GET_SELECTED_FIELDS - We need to map the result fields after user selects it. The code goes like this. This is step is to update the dynpro fields.
I need a internal table as well as a work area here. like,
data: lt_fields type table of dynpread,
        la_fields type dynpread.
field-symbols: <fs_return> type ddshretval.
so fill out LT_FIELDS from the IT_RETURN table
loop at lt_return assigning <fs_return>.
    la_fields-fieldname = <fs_return>-retfield.
    la_fields-fieldvalue = <fs_return>-fieldval.
    append la_fields to lt_fields.
    clear: la_fields.
endloop.
Call the FM to update the dynpro
call function 'DYNP_VALUES_UPDATE'
    exporting
      dyname               = sy-repid
      dynumb               = '1002' "This is my screen number. You could use 1000 for selection screen (hope so)
    tables
      dynpfields           = lt_fields
    exceptions
      invalid_abapworkarea = 1
      invalid_dynprofield = 2
      invalid_dynproname   = 3
      invalid_dynpronummer = 4
      invalid_request      = 5
      no_fielddescription = 6
      undefind_error       = 7
      others               = 8.
if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
good luck

How can I get CDP neighbor information from access point reports in Cisco Prime 2.0

How can I get CDP neighbor information from access point reports in Cisco Prime 2.0? I have looked through all the reports and I cannot find a report that gives me the CDP neighbor information of an access point. I thought that information was in there, however I cannot seem to find it.
Thanks in advance!

Hi
You can get this from an inventory report in PI (Select Report Type AP). Here is an example of PI 2.1 works for me. Once you export this into excel you can sort based on controllers & filter the single controller connected AP you want.
Regards
Rasika
**** Pls rate all useful responses ****

In chrome I'm getting green double underline hyperlinks to ads. How can I get rid of this without adding more junk to the computer?

I have both safari and chrome, because I'm used to chrome. The only extension I have is Google docs. I started getting green double underline hyperlinks to ads. How can I get rid of this without adding more junk to the computer? People suggest programs to do it, but how do I know they won't make it worse?
Is someone from Apple here and can answer?
Thanks!

You may have installed the "VSearch" trojan. Remove it as follows.
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Reset the home page and default search engine in all the browsers, if it was changed.
Step 2
Triple-click anywhere in the line below on this page to select it:
/Library/LaunchAgents/com.vsearch.agent.plist
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
Restart the computer and empty the Trash. Then delete the following items in the same way:
/Library/Application Support/VSearch
/System/Library/Frameworks/VSearch.framework
~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

I don't no much, but I can follow instructions. How can I get my rental movie from my iPhone to my iPad.... And I've rentented another movie, now I want to get it from pc to iPad....help be much appreciated...

I don't know much, but I can follow instructions. How can I get my rental movie from my iPhone to my iPad.... And I've rented another movie, now I want to get it from pc to iPad....help be much appreciated...

Did you rent the film directly on the iPhone ? I've never rented films, but from : http://support.apple.com/kb/HT1415 :
You can move the rental between devices as many times as you wish during the rental period. However, the movie can only be played on one device at a time. If you rent a movie on an iPhone, iPad, iPod touch, or Apple TV, it is not transferable to any other device and you must watch it on that device.
If you've rented a film on your computer's iTunes then you should be able to sync it to your iPad from your computer's iTunes via the Movies tab that shows on the right-hand side of iTunes when you've selected the iPad 'device' on its left-hand side

How can I get an itunes movie from macbook to apple tv via airplay, how can I get an itunes movie from macbook to apple tv via airplay

how can I get an itunes movie from macbook to apple tv via airplay?

You don't use Airplay. You set up Home Sharing on both and under the Computers section of AppleTV you'll then find it under Movies (or Rentals if rented), assuming it's in a compatible format.
AC

How can I get the selected rows from two ALV grids at the same time?

Similar Messages

Maybe you are looking for