How can I get the verification codes for system updated

I still can't get the verification codes to be sent to my mobile phone after I updated my system to ios 8.0 since yesterday

Hello Slordan2012
Log in to appleid.apple.com and resend the verification email to then verify the address. If you cannot get pass that, then you can always force the restore on your iPad and then enter in the password to bypass trying to turn it off.
Apple ID: Associating and verifying email addresses with your Apple ID
http://support.apple.com/kb/he68
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Regards,
-Norm G.

Similar Messages

  • How can I get the verification code for iCloud it's not letting me do it password has been reset but I can't reset the iPad until I have turned off find my iPad but I can't do that until I have verified iCloud any ideas

    I'm trying to help set up a new iPad but it will not send me or cannot receive the verification email so I can set up iCloud what can I do?

    Hello Slordan2012
    Log in to appleid.apple.com and resend the verification email to then verify the address. If you cannot get pass that, then you can always force the restore on your iPad and then enter in the password to bypass trying to turn it off.
    Apple ID: Associating and verifying email addresses with your Apple ID
    http://support.apple.com/kb/he68
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Regards,
    -Norm G.

  • How can I get a verification code for Photoshop Elements 7 ?

    I CAN NOT GET A VERIFICATION CODE FOR PHOTOSHOP ELEMENTS 7
    SO I CAN SEND EMAIL WITH PHOTO.  WOULD SOMEONE TELL ME HOW
    TO GET THE VERIFICATION CODE. I HAVE TRIED REPEATABLY TO
    ADOBE WITH NO RESPONSE.
    CHARLES TODD
    Email:   [email protected]

    I am talking about that when I try to share a Photo from the Organizer of Photoshop Elements 7
    thru the use of Email attachment, It will not transmit.  I get a message that tells me to enter
    a "Verification Code".  I do not have a verification code and have been unable to get one from adobe.
    This is Photoshop Elements 7 which I bought from Adobe. It was a packet of Photoshop Elements 7
    and Photoshop Premiere Elements 7. Any advice would be appreciate.
    Charles Todd....Email:   [email protected]

  • How can I get the connection code for the magic track pad?

    I want to use my magic trackpad and I scrapped the box with the connection code. How can I get it again? I don't need it for Mac, but yes for windows...

    user570667 wrote:
    Hi 2 all,
    How can i get the source code from java concurrent program in R12? like , "AP Turnover Report" is java concurrent program, i need to get its source code to know its logic. how can i get its source code not the XML template?
    Regards,
    ZulqarnainDid you see old threads for similar topic/discussion? -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Java+AND+Concurrent+AND+Source+AND+Code&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • How can I get the PUK code for my SIM card?

    I had to do a factory reset this morning on my DROID RAZR. As I was going through this afternoon setting everything up again, I saw that I could set a password for my SIM card. I thought it was asking me to create a password, not enter a default one. So needless to say, I locked myself out of my phone, and I need the PUK code. I cannot call, this is my only phone, and I cannot go to a local store today or tomorrow. I also cannot go the next two days without my phone. I've tried doing a chat, but because it's only sales that communicate through the chat, they were less than helpful and told me I can only fix this by going to a store, which I can't do.
    So, can I chat with anyone to get my PUK code today via internet?

    Why is this working for everyone, but me? When I follow these instructions (and many others that I've found in this community -- which has been helpful with other matters thus far) There is no PUK or SIM information. I have an (ESN) and my phone number. that's it. Help! I'm in a rabbit hole!
    Many thanks for any support you can provide!

  • How can I get the sample code for crawler plugins?

    Hi,
    One SES document mentioned that there are three sample crawler plugins, which reside in $ORACLE_HOME/search/sample/agent. However, I couldn't find them. Did I miss installing something? Can anyone share with me the sample code?
    Thanks.
    Jun Gao

    The original 10.1.6 sample plugins are no longer distributed in 10.1.8.1 as there were a few problems with them. I would suggest you take a look at
    Simple File Crawler
    http://www.oracle.com/technology/products/oses/pdf/Buidling_Custom_CrawlersJan12_07.doc
    Sourcecode here:
    http://www.oracle.com/technology/products/oses/files/simplefilecrawlerpluginmanager.java
    and here
    http://www.oracle.com/technology/products/oses/files/simplefilecrawlerplugin.java
    And the two crawlers under "Sample Code" on the OTN page:
    http://www.oracle.com/technology/products/oses/index.html

  • How do i get a verification code for element9 so i can send pics

    how do i get a verification code for element 9 so i can send pics

    I know some email services block bulk email completely and I’ve only tested it with Gmail which works fine. Should also work with other web mail e.g. Yahoo and Hotmail. Before you start it will help to check your internet security settings. If they are set to High, reduce the settings to Medium temporarily. Then follow these instructions.
    1. Log in to your mail provider on the web and add the following email to your address/contacts book.
    [email protected]
    2. Open Organizer and on the menu click:
    Edit >> Preferences >> Sharing
    3. Choose Adobe Email Service from the client dropdown menu.
    4. Add your name and email address to the fields provided and click OK
    5. Test the system (first use only)  by selecting a photo in organizer and choosing Share >> Photo Mail then click Next
    6. Choose a contact then click  Next
    7. Click Next Step, then click Next - the sender verification dialog will open.
    8. Check you have spelt your email address correctly and hit the Resend E-Mail button.
    9. Go to your inbox (also check spam) and when the Adobe mailer message is received copy (Ctrl+C) the long verification code.
    10. Return to the verification dialog and paste it into the Sender verification field and click OK.

  • How can i get the source code from java concurrent program in R12

    Hi 2 all,
    How can i get the source code from java concurrent program in R12? like , "AP Turnover Report" is java concurrent program, i need to get its source code to know its logic. how can i get its source code not the XML template?
    Regards,
    Zulqarnain

    user570667 wrote:
    Hi 2 all,
    How can i get the source code from java concurrent program in R12? like , "AP Turnover Report" is java concurrent program, i need to get its source code to know its logic. how can i get its source code not the XML template?
    Regards,
    ZulqarnainDid you see old threads for similar topic/discussion? -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Java+AND+Concurrent+AND+Source+AND+Code&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your repl

    How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your reply. Thanks!

    It's good to read Antoniad's post.  It reassures me that I can use my new iPad as an international communication device which is the reason I purchased the thing.  However, I called Verizon today (my provider of cellular data) who told me that I can't just pop in a SIM card as you suggested.  He also said that he was from the "Pre-Pay" division of Verizon and he was certain that I couldn't do what I planned to do.  I was extremely disappointed as I had called Apple prior to buying the iPad and I read the algorhythm on the website for choosing an iPad before purchasing.  Those sources were quite specific and the information seemed clear.  I would be able to use my iPad to communicate through cellular connections while traveling on the road, literally, abroad.  I was told that I could pop in a data card wherever I was, just as you indicated in your message above, and voila I was good to go.  The Verizon rep definitively rained on that parade, but said that I might be able to do this if I have a "Post-Pay" account, a different area of Verizon.  I haven't had the chance to talk to this division yet, so I looked to Apple's Support for answers.  Maybe I will find out that I can use my iPad as an international communication device while traveling on the road afterall, however, it appears I may need a different type of account (Post-Pay), something I was never warned about. Can I switch to this kind of account?  I don't know.  I have to find out.  If you have any information about this issue, it would be good to share since I strongly suspect there are others who bought the iPad for the same purpose that I have.

  • How can I get the HTML codes in illustrator?

    Hi, I am a graphic designer, and I am getting into the web world, I wanna know how can I get the HTML codes to upload a web design made using Illustrator,...¡?Does any one know?Please let me know...

    everyone here is right, dreamweaver is better and you will need to understand html for this to work. HOWEVER, you can make a functional website using just illustrator and notepad (or text edit if you're on a mac).
    Design your site in illy, slice it up with the slice tool. http://s23.postimg.org/mv311kpp7/test_illy.jpg 
    Save for web and select html and images, you'll get an html file and an images folder. Open the HTML file in your text editing program and it will look like this: http://s10.postimg.org/f32nf6r2h/html_stuff.jpg   you'll have to know HTML codes but you can find tutorials online for most stuff, you'll just have to figure it out. In my fake site, i linked a button to google so i had to add <a href> tags to the code. http://s22.postimg.org/5avpadhch/a_href.jpg  save the html file and open it in your web browser, hopefully not IE. You can't tell in the picture but the middle button actually does link to google. http://s21.postimg.org/qd77slqmf/firefox.jpg

  • I have entered the wrong numbers to put my phone in pass code lock.  However, I didn't set the autolock....how can I get the pass code lock reset?

    I have entered the wrong numbers to put my phone in pass code lock.  However, I didn't set the autolock....how can I get the pass code lock reset?

    Your only choice is to place the phone in DFU mode (search Google for instructions) and restore as a new device.  You will lose all your data.

  • In Elements 11 how do I get the verification code needed to send files as e-mail attachments ?

    In Elements 11 how do I get the verification code to send files as e-mail attachments ?

    I’ve found it usually works best with web mail via Adobe after obtaining verification. I know some email services block bulk email completely and I’ve only tested it with Gmail which works fine. Should also work with other web mail e.g. Yahoo and Hotmail. Give it a try. Before you start it will help to check your internet security settings. If they are set to High, reduce the settings to Medium temporarily. Then follow these instructions.
    1. Log in to your mail provider on the web and add the following email to your address/contacts book.
    [email protected]
    2. Open Organizer and on the menu click:
    Edit >> Preferences >> Sharing
    3. Choose Adobe Email Service from the client dropdown menu.
    4. Add your name and email address to the fields provided and click OK
    5. Test the system (first use only)  by selecting a photo in organizer and choosing Share >> Photo Mail then click Next (Mac users should use attachments)
    6. Choose a contact then click  Next
    7. Click Next Step, then click Next - the sender verification dialog will open.
    8. Check you have spelt your email address correctly and hit the Resend E-Mail button.
    9. Go to your inbox (also check spam) and when the Adobe mailer message is received copy (Ctrl+C) the long verification code.
    10. Return to the verification dialog and paste it (Ctrl+V) into the Sender verification field and click OK. Wait for validation confirmation then click OK to continue

  • How can I get the serial number for registration and instalation?

    Hello ,How can I get the serial number for registration and instalation?

    contact your local sales representative.
    You don't need a serial number to install LabVIEW.
    Registration is optional.
    Activation is needed after the evaluation period.
    Install it without number and it will work for a limited time (30days?) in evaluation mode, giving you plenty of time to decide if you want to buy it.
    Check the license manager to see the activation status of everything installed.
    LabVIEW Champion . Do more with less code and in less time .

  • How can i get  the column name   for assigned constraint name  from  the  user_constraints   table?????

    Hi  ,
    I  have a table  so  many constraints   on so  many  columns. I  need to  know  which column has which  constraint plsql dev?? like below...
    table_name -------- col_name ------ constraint_name_of_that_col
        xxxxxx              xxxxxxx              xxxxxxxxxxxxxxxx
    or else please let me know  how can i  get the  corresponding col_name for a particular  constraint name???

    My be this can give you a help:
    [code]
    SELECT *
    FROM   ALL_CONSTRAINTS
    WHERE  R_CONSTRAINT_NAME IN (SELECT CONSTRAINT_NAME
                                                               FROM   ALL_CONSTRAINTS
                                                               WHERE  TABLE_NAME = 'TABLE_NAME'
    [/code]

  • How can I get the souce code of a labview vi .

    Hi
    How can I get the source code of a labviw vi.
    Mal

    The LabVIEW block diagram is the source code.
    It is compiled through the LabVIEW environment into a format suitable for running.
    It does not go through an interim conversion to another language before it gets compiled, so
    there is no other source code. The actual vi breaks down into 4 parts :
    Front panel
    Block diagram
    Code (diagram compiled to machine code)
    Data (control and indicator values, default data, diagram constant data, and so on)
    Thanks
    Sacha Emery
    National Instruments (UK)
    // it takes almost no time to rate an answer

Maybe you are looking for