How can I insert the reusult of a failed test of a secuence in the status batch result status message box ?

Hello, I'm totally new to programming. I started with LabView and test stand to make some test as VI's. When test stand secuence ends, the batch result box (batchmodel.seq) pops out for the several uut's tested in every socket. I'd like to add to the status message the information fo the test wich failed instead of searching this info in the xml (or html) report.
Joel Urbaez
Test Engineer ,
Napco Alarm Lock Intl. Group.

Hi Joel:
Every report in TestStand comes with message on top of the report (below the header) that tells you which step in the sequence caused the failure. Hence, you do not need to read through the entire report to get this information. If you still want to use the banner to report this information you can do the following:
1. After the sequence has executed you will have to add a step in the Post-UUT sequence.
2. Here you can either choose to show a message popup where you can display the step that failed
3. You would have to use the following variables:
If ( RunState.Sequence.Locals.ResultList[0].Status = "Failed") ? RunState.Sequence.Locals.ResultList[0].TS.StepName
4. You can also try to modify the modelsupport2.dll file for the functions that bring up the popup banner to add more information.
Thank you
Nandini
NI

Similar Messages

How can you insert "Page Break" in a pdf file so you will specify the pages

How can you insert "Page Break" in a pdf file so you will specify the pages

How / from what was the PDF originally created? It would be easiest to insert page breaks into the original document, then recreate the PDF.

How can I insert a button in my form that add a copy of the page where I'm in? It is possible?

Hi! I'm doing a cv template for my company so that Human Resourses can send to candidates. I made the form and I have a page for the "professional experience" area. This page is enough for a recent graduated student but not for a senior candidate (that has more experience). Can I insert a "ADD" button on this page where it creates a reset copy of the "professional experience" page where the candidate could add more professional experience? Thanks

Yes, by using JavaScript to create a new page by spawning a template page. The downside is that is will only work with Reader 11 (and Acrobat) and not previous versions of Reader. It also won't work if you need to Reader-enable the document so that pre-11 versions of Reader can save the filled-in form. If these limitations are not a problem and you need more help, post again.

How can I insert an image into an mov file in iMovie while keeping the background music?

I have a short MOV file movie clip that has background music but one of the images (it's a static element with text) is incorrect. How can I replace the image but keep the backgroup the same? Also what size would the image need to be to properly fit?
Thank you!

Hi hyue,
Thanks for visiting Apple Support Communities.
If you would like to add an image to a project in iMovie for iOS, see this article for helpful steps:
iMovie for iOS (iPad): Add photos to a project
http://support.apple.com/kb/PH3171
All the best,
Jeremy

How can I insert a line that extends from a word without it affecting the formatting of the WHOLE document?

I am trying to create a simple form for people to print out and fill in. I want fields like 'Name' with a line extending from the word for people to write on. What should be the simplest of tasks has confounded me for HOURS. Inserting a line as a 'shape' or 'drawing with pen' just messes up the formatting of the whole document. I've used Pages 'Help' but it almost forced me to staple my eyelids to the carpet. Surely there is a SIMPLE way to do this. I even tried 'tricking' Pages by 'underlining' a row of spaces. It won't even allow you to do this because Pages is far more clever than a human.
My cat is looking at me with increasing consternation.

I would use a right-aligned tab with an underline leader.

In GB, I need to insert an audio track. When I try, it obliterates part of the adjacent bridge (track). How can I insert an audio track in an audio timeline without stepping all over clean material? Is it possible to recover the "clean" track bridge?

Am doing an audio timeline in GB. Need to insert a corrected section of track. When I try the insert, it knocks out the top part of the adjacent track bridge/element. How can I insert cleanly in a timeline? Is it possible to "recover" the good track that was "stepped on?"

Undo what?
Insert in a new track?
I don't think so. I've started an audio book and I'm doing chapter long segments (assuming I can make simple corrections, such as ones made in iMovie and numerous other video editing programs. Routine edits in GB are simple and intuitive. I cannot wrap my mind around the fact that I'm prevented from doing a simple drag and drop, import or paste a two-sentence audio clip. Nor can I find any reference to straightforward audio elements.
Any suggestions you might have would be appreciated.

How can I insert data into the standard CRM tables ?

Hi Experts,
Scenario----
I need to download few attributes (fields) from SAP MDM to SAP CRM via SAP XI. I'm using the 'COMT_PRODUCT_MAINTAIN_API' API for it.
The attributes(fields) that are present in the strucutres of API are downloaded into CRM system (by executing the Inbound proxy that is created based on the Message Interface created on XI) by calling the functions present in the API.
And for those fields that are not present in CRM, but need to be downloaded into CRM, I'm creating the Set Type attributes in CRM, which get appended to the API.
My query is:
There are fields in CRM into which I need to insert the values. But they are not listed in the API. So, how can I insert(/download) the values into these standard fields?
Regret the long description. Intended to be clear.
TIA. Points will be awarded.
Regards,
Kris
Edited by: Kris on Jul 21, 2008 8:00 AM

he INSERT program throws exception???
can any one help me how to insert data into tabel.I have never used the jdbc driver to access, but what do you think that the flag READONLY=true means? An insert is not a read.
Kaj

How can I Insert pictures in the text? Is there another way besides attaching a file?

How can I insert a picture in the text email instead attaching file?

The feature to add images in tables is gone, ike about another 90 features that exists in Pages 09.

How can I insert a number of photos in a numbers doc without the file becoming too large?

How can I insert a number of photos into a numbers doc without the file becoming too large?

Use smaller photos.
Seriously, reduce the file size of the photos in Preview, PhotoShop, iPhoto or other application before inserting tehem into the Numbers document.
Regards,
Barry

I have powerpoint for Mac on my imac. I can't seem to get the active text box function to work like it did on my PC. How can I insert an active textbox into a presentation that will allow me to type while presenting?

I have powerpoint for Mac on my imac. I can't seem to get the active text box function to work like it did on my PC. How can I insert an active textbox into a presentation that will allow me to type while presenting?

I've gotten a little further on this. The dynamic select is
working fine. It's the "a href" code that isn't. I'm wondering if
someone can look at this line and tell me if it's okay to build the
query string this way. The storeid comes through fine but I'm still
not getting the employeeid value to pass. Here's line that's not
working:
td><a href="registerStoreCust.php?storeid=<?php echo
$row_storeRS['storeid']; echo "&employeeid="; echo
$_GET['employeeLM']; ?>">Register
Customer</a></td>

How can I insert an existing ApDiv into a tab in the Spry Tabbed Panel?

I have 5 of them all containing nested Apdiv within nested ApDivs (a long storie ) that I would like to insert into 5 tabs in the Spry Tabbed Panel.
Please help.

"Hi Gramp,I realize I have made hard work for myself but I really don't know any better. I also realize now that taking on this project may have been a mistake :-)I taught myself how to use the design side of Dream Weaver. These five ApDivs were created in the content area of the spry tool and it worked fine. (yes a lot of work though)For the first time I looked at the code side. I wanted to try to bring a peace of code from another page for something unrelated and when it didn't work I took it out and without noticing, deleting a line from the Spry tool.Of course like a classic newbe I was working without a backup copy so here I am. Loosing hours of tedious work and on the verve of tears :-)I do have some questions though. My APDiv
What does "apDiv1" stands for and what does "My APDiv" stands for?Is the only thing I have to do is changing this line for my five ApDivs and paste it in the appropriate places in the code? Thanks again,Gilaad
Date: Sat, 16 Jun 2012 20:39:07 -0600
From: [email protected]
To: [email protected]
Subject: How can I insert an existing ApDiv into a tab in the Spry Tabbed Panel?
    Re: How can I insert an existing ApDiv into a tab in the Spry Tabbed Panel?
    created by Altruistic Gramps in Spry Framework for Ajax - View the full discussion
You have really made hard work for yourself by using APDiv's. I suppose it can be done, but I would not. To answer your question, I have create an example as per#apDiv1
My APDiv
Content 2
Tab 1
Gramps
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4498679#4498679
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4498679#4498679. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Spry Framework for Ajax by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How can I insert a table in the header?

The question is easy: How can I insert a table of one row in the header.
Thanks in advance.
Jesús.

There are multiple versions of Pages in circulation on Mavericks and Yosemite. Telling us which one helps with a more accurate answer.
If you are referring to Pages v5, then you cannot insert a table into the header or footer, because implicitly, these are table cells too. The discontinued Pages ’09 v4.3 would allow table insertion in the document header/footer fields.

How can i insert the variable value in MS ACCES Query

i am creating one Query (query1) in MS ACCESS ( like we creaate Tables, Forms and Reports in MS ACCESS ) in this Query i have given 2 constent value in BETWEEN CLAUSE , after that i Created a CROSS QUERY which is based on the privious Query (query1).
Now i want to insert the variable value using JSP and HTML in to Query(query1).
Doing this i want to execute the Query (query1) with variable perameters and
wants to get the risponce form CROSS QUERY.
In this matter how can i insert the value in Query(query1) using JDBC and JSP.

The query is
Select ZMSGMAP.GROUP_CODE as 'group', ZMSDSTATE.STATE_DESC as 'state', ZMSTRN.YRMON, sum(ZMSTRN.CMAQTY) as 'qty' from ZMSDSTATE,ZMSGMAP,ZMSTRN Where ZMSTRN.STATE=ZMSDSTATE.STATE and ZMSTRN.PLANT=ZMSGMAP.PLANT_CODE and ZMSTRN.YRMON between "+p1+" and "+p2+" Group by ZMDGMAP.GROUP_CODE, ZMSDSTATE.STSTE_DESC, ZMSTRN.YRMONUsing this query i m trying to display the risult but the YRMON is displaying in a single column, i want to display it ia seperat columns. here p1 and p2 is YRMON(it is the yer month like 200102), for this solution i have created Cross table Query which is based on uper Query (query1) and design it column wise Display, it is givng the right display, but the problem is this i m not getting the technique throw which i can insert the variable values in to the query1 (which is designed in MS ACCESS).
u can contact me on [email protected] for more details.

How can I insert multiple page contents in the page layout properly?

I wanted to create 4 columns on the page layout. These 4 columns are of page contents.
After creating new web page based on that page layout, I attempted to enter 4 different inputs on all 4 columns.
Then, the result (from all columns) becomes the same.
Image - edit the web page based on 4 columns page layout:
Image - after edit & save:
How can I insert multiple page contents in the page layout properly?

First, I copied the HTML snippet for the Page Content on Sharepoint's Design Manger. The code of Page Content HTML snippet is shown below:
<div data-name="Page Field: Page Content">




<div id="ctl02_label" style="display:none">Page Content</div>
<div id="ctl02__ControlWrapper_RichHtmlField" class="ms-rtestate-field"
style="display:inline" aria-labelledby="ctl02_label"><div align="left"
class="ms-formfieldcontainer"><div class="ms-formfieldlabelcontainer"
nowrap="nowrap"><span class="ms-formfieldlabel"
nowrap="nowrap">Page Content</span></div>
<div class="ms-formfieldvaluecontainer"><div class="ms-rtestate-field">
Page Content field value. Lorem ipsum dolor sit incididuntet dolore.</div>
</div></div></div>


</div>
After I published the page layout, I found the code for Page Content from its ASPX page. The code is shown below:
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/></div>
So, I attempted to create 4 columns by using 4 HTML snippets of Page Content on the same page layout. The page layout is generated from HTML file to ASPX file.
Then I edited some parts in ASPX page layout:
<asp:Content runat="server" ContentPlaceHolderID="PlaceHolderMain">
<table>
<tr>
<td style="width:70px;"> </td>
<td style="width:250px; text-align:right;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:40px;"> </td>
<td style="width:200px;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:25px;"> </td>
<td style="width:200px;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:25px;"> </td>
<td style="width:200px;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:175px;"> </td>
</tr>
</table>
</asp:Content>
The 4 columns for Page Contents appeared on the web page when I created new page using that page layout. But the problem is that all 4 columns displayed the same result from 4th column.

How can I insert a parameter to the layout template?

How can I insert a parameter defined in report to the layout template? just like insert a field. I wanna display the parameter in the output.

If its Ebiz, concurrent program.
Put this in your template in the starting,
where the P_BUSINESS_GROUP_ID is one of the concurrent program parameters,
<?param@begin:P_BUSINESS_GROUP_ID?>
and then you can access the parameter in your rtf like <?$P_BUSINESS_GROUP_ID?>
Upload the rtf template back into apps.
and then rerun the conc pgm :)

How can I insert the reusult of a failed test of a secuence in the status batch result status message box ?

Similar Messages

Maybe you are looking for