How can i install 3rd party software into my Mac with OS X Mountain Lion

Dear Experts,
I wish to install a software downloaded from a broadband service website (Yes, 4G broadband from Malaysia) for my 4G dongle to be able to work with OS X (10.8.1). But the system stopped me from installing it, as it said 'the installation file is not downloaded from App store and my security preference has stopped it'?!
I have my 4G broadband with me but can not be used :-(
**It works with my Macbook Air (OS X 10.6.8)

Right-click it and press Open to install that application

Similar Messages

  • Can't install 3rd party software

    I've just done an archive and install of Tiger on my G4 with a NewerTech 2gig CPU.
    I was able to download and install the update to 10.4.10 without problem. However, now when I try to install anything else, I get the authenticate admin window but it just opens, then snaps closed. I don't have time to put in my password. I tried DiskWarrior and trashing the pref files for system pref and finder. I've also run Cocktail. I've run out of ideas. Any help would be appreciated.

    I had VirusBarrier X4 installed before I did the archive and install. I didn't choose save/transfer my personal setting when I did the install. So, VirusBarrier shows up in the application folder but since I can't install any 3rd party software I haven't reinstalled it. I tried to uninstall it but the uninstaller can't find that it's been installed, as I suspected it would, but took a chance.
    I don't have EyeTV. I been using Macs since 84. This is a new one on me.

  • How do I install 3rd party software with no optical drive on 27"

    How do I install Dreamweaver and Photoshop software without an optical drive, plus I have files on MacBook Pro to transfer but I do not want ti transfer everything and Transfer Assistant does not allow enough tight selection

    Buy an external optical drive to use.
    Borrow a Mac with an optical drive. Clone the DVD to a USB flash drive.
    Connect to another Mac via Target Disk Mode and use the other computer's optical drive.
    Connect another Mac to your home network and transfer over the network.

  • How can I install 3rd party apps , not thru Apple store

    My MBP got Mountain lion as OS. I want to install Kies of Samsung so that I can xfr pix from Samsung Galaxy camera to my MBP. Is it possible??

    http://samsung-kies.en.softonic.com/mac

  • How can I install 3rd party apps with OS 10.8.2on my MBP.

    Hello friends,
                          My MBP OS was upgraded to 10.8.2. Now I am unable to install apps from 3rd parties. Its only installing apps from Apple store only. Is ther a way out?
    Best regards
    Mohan

    Control-click one and choose to open it, or set Gatekeeper to allow usage of that software.
    (70334)

  • 3rd Party Software's to integrate with current application

    Hi All,
    Could you please tell me(simple steps-;)) how to use the 3rd Party Software's to integrate with current application(ATG).
    Example :cybersource (validate the address and credit card),to do this what are steps we need to follow and do we need to create any components to configure the software .
    I will appreciate if you share the resolution it will be helpful to others too.
    Regards,
    Jyothi.mj

    I think this would be a good start
    http://www.scribd.com/ron_gelinas/d/64173966/41-Integrating-CyberSource-with-ATG-Commerce
    Thanks

  • Can I use 3rd party instruments/plug-ins/loops with Garageband '11 running OS X 10.6.8? and how do I install?

    Can I use 3rd party instruments/plug-ins/loops with Garageband '11 running OS X 10.6.8? and how do I install?

    10.6.8 won't run on a PowerPC Mac. 
    10.6.8 also won't run the latest Java.  Here's what version of Java you can run:
    https://discussions.apple.com/docs/DOC-5532

  • Prevent shockwave player from trying to install 3rd party software?

    I am a sysadmin for a relatively small-ish enterprise (around 50-ish PCs).  We have scripts which push out shockwave player to all our systems but when a user loads a page which requires shockwave, they get a UAC prompt because the player is trying to install 3rd party software (usually Google Chrome browser).  How do I stop this from happening?  Is there a command line argument I can set (preferable method) or some other centrally-managed method for turning this off?  Thanks in advance.
    M

    I guess I am not explaining myself very well. 
    I am currently using the EXE full installer from the distribution page.  The installation works very well and I can get it to run in "silent" mode to avoid interaction with the user.  Once the installation finishes, and I load a web page which requires Shockwave player, I get prompted at that point to download/install Chrome.  That is the part I would like to know if it's possible to stop, because all our users are getting UAC prompts and it's always because Shockwave wants to run some installer after loading.  I had hoped that going to the distribution version (as opposed to the straight download from the Adobe.com home page) would resolve this but they seem to be the same version, which makes me wonder why I bothered to sign up for it in the first place.

  • STOP INSTALLING 3rd PARTY SOFTWARE

    STOP FORCE INSTALLING 3RD PARTY SOFTWARE WHEN UPDATING REGULAR ADOBE FLASH.  I HAD A GOOD DEAL OF RESPECT FOR YOU AS A COMPANY, UNTIL YOU STARTED FORCING THIS TYPE OF STUFF DOWN THE CONSUMERS THROAT.  HOW MUCH IS MCAFEE PAYING YOU FOR THIS?  THIS IS TANAMOUNT TO WHAT APPLE DOES BY INSTRUCTING US HOW TO THINK AND NOT GIVING US AN OPTION TO OPT OUT.  SO GO SCREW YOURSELF AND STOP INSTALLING THIS ON OUR MACHINES WITHOUT GIVING US AN OPTION.

    the official word is that it is not supported and can invalidate your warranty.
    also discussion of any such activities is not allowed on here.
    threads/posts will be deleted and or locked if they are.

  • HT4972 i have iphone 3gs v 4,2.1 i want to upgrade to ios 5 i will erase all data, how can i install again the software, and now my device can not detect to my computer? what can i do? please help me..

    have iphone 3gs v 4,2.1 i want to upgrade to ios 5 i will erase all data, how can i install again the software, and now my device can not  be detect to my computer? what can i do? please help me..

    You can not install iOS 5. It is no longer signed by Apple. You can only install the current version of iOS. For a 3GS, that's 6.1.3.
    However... if you have 4.2.1 on your phone, odds are it is not a 3GS, it is a 3G. If that's the case, you've reached the end of the road for that. It can not run anything higher than 4.2.1.

  • How can i get 3rd party plugins for logic such as massive or nexus?

    how can i get 3rd party plugins for logic such as massive or nexus?

    Buy the 64bit AU versions from their respective online stores...
    Massive can be found at;
    http://www.native-instruments.com/en/products/komplete/synths-samplers/massive/p ricing/?content=2115
    Nexus 2 (as Nexus 1 will not work with Logic Pro X) from;
    http://refx.com/products/nexus/summary/
    However, I suspect, based on the fact you could have simply searched on Google.. that buying them wasn't what you had in mind.................

  • How can I install Photo Expressions software?

    How can I install Photo Expressions software?  I tried to drag and drop all items on to the Applications folder as I've done with other software, but this did not seem to work.

    Those are definitely windows files. Is it possible that the CD/DVD has a different folder for a Mac version of the program? If I have found the correct web site (Individual Software) there is no mention of a Mac version.
    Stedman

  • How can I install Camera Asisstant Software in A200-1AE?

    How can I install Camera Asisstant Software in A200-1AE without reinstalling the system?
    I cannot find this software on my system and I cannot find it on DVD which I got with my PC.
    Please someone help me.

    Hello Karol
    If your notebook has built in web cam placed over the LCD display this software will be listed under START > All Programs. Everything is described in Users manuals document.
    When you start your notebook in the task bar is placed small symbol. If you place the mouse pointer over this symbol you will see Camera Assistant Software dialog. To start this software you can also move mouse pointer on to left display side (somewhere in the middle of the left LCD side) and small window will be open. There you can start this software.
    Please let me know if your A200 has built in web cam or not.

  • After power down and a cold restart, I automatically restart in my Administrator Account.  Running 10.8.4 with one Administrator account, one user account and one guest account.  Recently downloaded and installed 3rd party software (Panorama).

    After power down and a cold restart, I automatically restart in my Administrator Account.  Running 10.8.4 with one Administrator account, one user account and one guest account.  Recently downloaded and installed 3rd party software (Panorama).  Installation required that I create a super user named Other with root privileges. I did so and successfully installed the 3rd party software.  I powered down a few days late and when I restarted, I went automatically to my Administrator account with no login password required.  I deleted the Other account, powered down and restarted with the same result - opened in Administrator.   I then followed the steps to disable root user, powered down, cold restart - same result, opened in Administrator account.
    Any suggestions?  Any thoughts?  Much appreciate any help you might offer.
    jtsinphl

    Welcome to Apple Support Communities
    Disable automatic login. Open System Preferences > Users and Groups > Login Options, press the padlock at the bottom left corner, and select "Off" next to "Automatic login"

  • How can I install my twain Scanner into Elements 12

    How can I install my twain Scanner into Elements 12? I tried the solution showed on Adobe Web (Copy the folder ImportModules from Optional Plug-ins to folder Plug-ins) and did not get results. Is there any other procedure to do? My computer is MAC. Thanks!!!

    Hi Barbara.
    1) I restarted the computer
    2) The drivers are the latest
    3) Samsung Multifuncional CLX-3185FW
    4) OS X 10.9.4
    I have Elements 8 Installed and recognize the scanner on the "import menu".
    Any idea?
    Thanks for the help.

Maybe you are looking for