How can I install logic 9 on new mac 10.8

how can I install logic 9 on new macBook pro 10.8?
My Cd rom shows Logic 7 and on the old mashine (MacBook white 10.6) I have Logic pro 9.
My MacBook pro 10.8 does't accept the Cd Rom...
Regards
Paul

Kerrse,
...and it's content?
While your method will get the app itself across.. the content will present a possible problem, though once it is updated to 9.1.8 the OP could try the "in menu' option to download content but the essential stuff normally gets installed from the DVDs initially with LP9 Boxed set... so it may not be as easy as simply copying across the app only.
However, worth giving a try.....

Similar Messages

  • How can I install logic pro 7.2 (made for power pc) on a brand new Macbook pro?

    How can I install logic pro 7.2 (made for power pc) on a brand new Macbook pro with OSX 10.7.4?
    This message appears: You can't open the aplication LogicPro.mpkg because power pc aplications are no longer compatible.
    Thanks folks

    You should be able to copy all the files from your old computer, although it might not work if the old machine didn't have an intel processor. When I got a new Mac a few months ago, I used the migration assistant to copy everything from my old computer's time machine backup disk. All my old pro apps, such as Final Cut Pro 6, work fine on the new machine under Lion.
    Later, I wanted to install Soundtrack pro and couldn't do it from the original disks. So I installed it on my old machine and copied the files. It worked perfectly.

  • HT4759 how can i install icloud to my mac which is running on Mac OS X version 10.6.8?

    how can i install icloud to my mac which is running on Mac OS X version 10.6.8 ?

    You must first upgrade to 10.7.5 or later.
    Upgrading from Snow Leopard to Lion or Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • How can i install logic pro on my macbook air

    How can i install logic pro on my macbook air?

    Welcome to the Apple Support Communities
    If you bought it in discs, buy the USB SuperDrive or use Remote Disc

  • My laptop has broken and I want to migrate to a mac. Is my creative suite for Windows can be installed on my new Mac?

    My laptop has broken and I am decided to migrate to a Mac. Is my Creative suite for Windows can be installed on my new Mac?

    if you have cc, yes.
    if you have cs6, you need a cross-grade, Order product | Platform, language swap
    otherwise, no.

  • How can i install IMessage on my mac

    How can i install IMessage on my mac. i could not do that.

    Hi,
    Messages beta will only install on Lion.
    http://www.apple.com/macosx/mountain-lion/messages-beta/  There is a download button on this page.
    The app needs to be Downloaded, Installed and then the computer Restarted
    The last is quite important.
    9:49 PM      Saturday; June 9, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.7.4),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • How can I install Logic Pro 8 on my OSX Lion?

    Having had to do a clean install of OSX Lion I find I can't install Logic 8 on my system. I can't understand why an expensive in-house product that is only 4 years old can't be installed on the latest OS. Can't find any advice from Apple, and am still waiting for a call back fron the support line.
    How can I get around this - I have already spent a day re-installing all my other software on Lion, so reverting to Snow Leopard is not an option.

    What do you mean, it's not installing?
    Give more details please... We cannot mind read or see your screen here

  • How can I install cs3 on new iMac with no disc drive?

    I purchased cs3 and have all the original discs and serial number but can't use them so easily with the new macs... I have read the other discussions and tried the links to download the cs3 trial and then imput my serial number.
    http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
    the links that are on this page give me http error: 404 message
    Is it just me? Do these links no longer work? Does anyone have anyother ideads on how to get around this?
    I'm not completely ignorant about computers- ignorant enough for this to be a very frustrating Saturday morning though... and the Adobe  chat is of no help which only make me want to punch an install disc even more.
    any help is appreciated
    Thanks!

    I was signed in with download assistant, no just in at adobe.com... I've tried different perferences and settings but when I click on the links nothing seems to happen. I've been messing around with this for a few hours now and it dawned on me that it may have something to do with my internet. I live outside the city- totally nice for gardening, totally terriable for internet thus I have a verizon data plan and not unlimited internet, I think possibly verizon is shutting it down because of restrictions I have on my data. This type of thing also happened when I upgraded to Mavericks. The file itself was larger than my month's data so it seemed like it wouldn't initiate the download... I don't know for sure if it is the same problem here but if you're telling me that you are having more successful results than I am that might be the reason.
    I'll take my computer to work or to my mom's house or somewhere where I can have unlimited access and see if I have any better success.
    Thanks so much for all your help!

  • Installing Logic on new Mac

    Hi
    On my current MacBook pro I'm running Logic 9 pro which was an upgrade from Logic 8. I'm awaiting delivery of a new MacBook pro which I plan to install Logic on as a new installation (rather than using migration assistant or setup assistant) My question is do I have to install Logic 8 then the Logic 9 upgrade as I have previously done on my current Mac? or can I just install the Logic 9 upgrade and if so, does the Logic 9 install discs contain all the Apple jam packs? Thanks in advance!

    Yes,
    The Logic 9 Upgrade is identical to the full retail version...
    Same number of Discs, same content...
    Well it was when I got it...
    Just make sure you have your Logic 8 Serial Number handy for when you are asked for it...
    Also, if your New Mac ships with lion, you will need to run Software Update to get the latest version of Logic 9 for Lion...
    Or you can Download it from Here
    http://support.apple.com/kb/dl1014
    Logic for Lion
    http://support.apple.com/kb/HT4807

  • Transferring pre-installed logic to new Mac

    I'm about to buy a new Mac and I'm wondering if all the files on my old macbook will transfer directly to the new computer without any hassle. My macbook was bought with Logic Express 7 (at the time) pre-installed and I've since updated to Logic 8 and then 9. Will the migration assistant transfer Logic along with the upgrades with no problems and, if so, can I then upgrade on my new mac to Logic studio? I'm willing to buy Logic Studio for £400 but, obviously, I'd prefer to buy the upgrade, as I already have Logic Express. Also, I have a downloaded Orange Vocoder plug in - will this transfer and work automatically as well?? Cheers dudes. Dan

    Hi,
    if you buy the Studio Upgrade, just install this onto your new Mac. However, you must own and keep all the old versions with their serial numbers, because they belong to your upgrade chain, but you mustn't install them onto a new mac before upgrading.
    Fox

  • How can I migrate data to new Mac Pro with only 1 monitor

    I am ready to set up my new Mac Pro.  I know how to migrate my files from my G5 using Firewire and making the new computer a target disk.  My problem is, I have only 1 monitor.  Is there an easy way around this, OR of not, can I use my Macbook Pro just a monitor and if so how? 

    If you make the new computer a FireWire Hard drive, the only thing on its monitor will be the firewire symbol. You don't need a monitor to see that.
    But if you did, you could start the new computer up first, look at the firewire symbol, get a warm fuzzy feeling, disconnect the  monitor and plug it into the old computer to make the transfers.

  • How can I instal ibooks in my Mac OS X Lion 10.7.5 (11G63)

    Any way to install IBooks in my mac air with an Mac OS X Lion 10.7.5?

    Upgrade to Mavericks:
    Upgrading to Mavericks
    You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
    Upgrading to Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks- System Requirements
          Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.

  • How can i install System Preferences for Mac OX S 10.6.8

    Hi ,
    My Mac book OS X started problem about system preference. I cant open or find system preference to adjust my time and date. Pls help me how can I reinstalled or find system preference .
    Thanks

    Apple - iCloud - Learn how to set up iCloud on all your devices.
    Kubilaynevay wrote:
    I want to install icloud on my iMac with IOS 10.6.8
     Sorry... you cannot.
    However... Once you have iClound Established on your iPhone... you will be able to use your Computer to access iCloud at iCloud.com.

  • How can I open PPS with new Mac Mini?

    How can I open PPS files with my new Mac Mini?

    Microsoft PowerPoint 2011...
    http://www.microsoftstore.com/store/msstore/en_US/pd/productID.237192800
    Apple Keynote...
    http://store.apple.com/us/product/MB942Z/A/iWork-09?
    OpenOffice...
    http://www.openoffice.org/download/other.html#tested-fulll
    File Juicer...
    http://echoone.com/filejuicer/

  • How can i down great a new mac pro 13" retina with osx 10.8 Mountain Lion to osx 10.7 lion?

    Hi Guy's,
    Can you help me with the following problem please?
    I have a new Macbook pro 13" with retina and a ssd HD.
    On this machine is a osx 10.8 Mountain lion installed.
    I need to down great this machine to osx 10.7.3. lion
    Bud it won't work.
    I use a usb key to bood to 10.7.3 it works always on a normal macbook pro.
    Can someone help me on this please?

    You can't. No new Mac can run any older version of OS X then what originally came on it.
    There are a few exceptions but to do so you would need a model that also came with the older OS at some point but then you would also need the older OS X installer files. Which aren't available to a Mac that came with a later OS X version.

Maybe you are looking for

  • IPhone 6 package lost in transit?

    I ordered an iPhone 6 that was scheduled to arrive last Friday, and it is Wednesday now and the package still has not arrived. I called Apple and they put a tracer on the lost package to start an investigation but they said there is nothing else they

  • FM actuals using F-48 (Post Vendor down payment)

    Dear sirs, I would like to know if it is possible to turn a COMMITMENT posting in FM into ACTUALS, by using transaction F-48 (Post Vendor Down Payment). Thanks a lot, Artur Campos

  • Static ? static ? static ?

    i wish to use the main() function to see my results step by step. but, do i really have to make every method a static one in order to elimate the error message " can't make static reference to method test2() in class testdrive" ? is there a better wa

  • Livecache Error in SCM5.0 - Database Instance Not Found

    Hi, I installed SCM5.0 SR2 IDES version on Windows 2003. I selected Livecache in SAP System option when installing SCM5.0. After complete installation, I executed MAxDb exe file to install the MaxDb. I get this error when I try to access LCA Monitor

  • Pricing related

    Dear SAptechies, If I create a round trip booking from sales order for a container and want to charge for single trip if it is loaded and no charge for other side of trip if the container coming back is empty. I don't want to bill my custoemr for the