How can i install windows 7 on my second hard disk while the first hard disk running with windows 8.1

I have Toshiba laptop P-75 model :
this model have two slots for the hard disks , on my first hard disk i am running the default windows 8.1 which came with the original condition (when i bought my laptop) , since i am a civil engineer many of my field programs  is not working on the
windows 8.1 version and the rest programs barely works appropriate!
I want to download windows 7 on the second hard disk, thus having dual boot in order to chose which windows i want to use.
thanks in advance 
ENGR. Saeed Al-Khaled 

You need to consult with Toshiba as this is a hardware specific problem and you may not be able to install Windows 7 dues to lack of hardware drivers and/or the laptop being configure for Secure Boot which Windows 7 does not cope with either.
It is your responsibility to do the research for this project to ensure compatibility and needed hardware drivers.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Similar Messages

  • Just bought a new macbook air, how can i install my iphotos from my mac desktop to the air

    just bought a new macbook air, how can i install my iphotos from my mac desktop to the air
    Bill

    Connect the two Macs together (network, firewire target mode, etc)  or use an external hard drive formed Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
    LN

  • I redirected iTunes to an external drive and moved my iTunes library and folder, but my hard drive is still low on space.  How can I be sure that my music is all on the external HD ONLY, especially with the new iCloud technology?

    I redirected iTunes to an external drive and moved my iTunes library and folder, but my hard drive is still low on space.  How can I be sure that my music is all on the external HD ONLY, especially with the new iCloud technology?  It doesn't look like I created any more space by doing this, AND I totally lost all my iTunes playlists.  I'm not sure if because I added old library materials manually if this messed up my playlists, or if the new location is just not reading my moved library.  In any case, I followed step by step instructions and found a few holes and thought I'd just "figure it out" but I guess I'm not as smart as I thought since I'm still scratching my head many hours later.
    Thanks for any support ;-)
    Eaglerocker

    Quick answer if you use iTunes' default preferences settings:  Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive.  Open iTunes and immediately hold down the option (alt) key (shift on Windows) so you get a prompt to select a library, then guide it to the 'iTunes Library.itl' file in the moved iTunes folder.
    If this is to a new computer and you put the copied iTunes folder in the default location of Macintosh HD > Users > *User Name* > Music  then you don't even need to start with the option key held down, iTunes will automatically look for it there.  (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)
    iTunes: How to move [or copy] your music [library] to a new computer [or another drive] - http://support.apple.com/kb/HT4527 - a somewhat bewildering and not always easily understandable set of options.

  • HT1338 im on osx snow leopard but the lion is no longer available on app store. How can i still upgrade to lion? my computer by the way is not compatible with mountain lion. thanks

    im on osx snow leopard but the lion is no longer available on app store. How can i still upgrade to lion? my computer by the way is not compatible with mountain lion. thanks

    Hello royalaqua,
    I do think you should ask yourself if upgrading to Lion is the right course to take.
    Snow Leopard is an excellent OS and Lion has literally been frozen out after barely a year.   Remember too that some of your apps may not work with Lion (those that have Rosetta, for example) so that could mean more new purchases.   Plus you may need to uprate your RAM too.

  • How can i install os on a second hard drive

    can i install  OS ON A SECOND HARD DRIVE

    I would say it is 99% normal common and a must. Maybe a couple - a bootable copy of your working system, no need to "install" it.  One that you can use to restore from in addition to TimeMachine.
    Not knowing what model Mac Pro whether it is 6,1 Late 2013 or something older and what its options are.
    http://liondiskmaker.com/
    Lets you create your own clean install Mavericks installer (use flash, hdd, any bootable volume)
    http://www.bombich.com/
    Carbon Copy Cloner vs. Super Duper-Which is better?  (  1 2 3 4 5)
    http://forums.macrumors.com/forumdisplay.php?f=1

  • How can a variable in a header be set to display the first header on a page, even if the paragraph format is different, such as a Header 1, Header 2, etc.?

    The type of first header on the page varies depending on the content, such as a Header 1, Header 1 Top, Header 2, Header 2 Top, etc.
    What syntax could be used to define the <$paratext[paratag]> in a Running H/F to pick up the header first header on the page?  Simply using a Running H/F1 with <$paratext[Header 1]> would miss Header 1 Top.
    Thank you.

    You can include more than one paragraph tag in the [paratag] part of a building block. When you include multiple paragraph tags, FrameMaker uses the first paragraph it finds with one of the tags. Separate the tags with commas, as in the following example: <$paratext[Head1,Head2]>
    … says my old 7.0 User Guide. As far as I remember, there have been other threads about how to interpret first paragraph it finds :-}

  • How can I install ML in a second mac with out pay

    i have two macs ind I want to install ML in the second mac how can i do i have to pay again

    Install Snow Leopard or Lion on the other computer. From that computer sign into the App Store with the same Apple ID used to purchase Mountain Lion. Click on the Purchases icon in the toolbar. Locate the Mountain Lion entry which should now have an active Install/Download button on the right.
    Also, read:
    Make Your Own Mountain/Lion Installer
    1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/Lion application. After Mountain/Lion downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the Mountain/Lion installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
    2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
    Open Disk Utility in your Utilities folder.
    After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
    3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
    4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
    Double-click on the InstallESD.dmg file to mount it on your Desktop.
    Open Disk Utility.
    Select the USB flash drive from the left side list.
    Click on the Restore tab in the DU main window.
    Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
    Drag the mounted disc icon from the Desktop into the Source entry field.
    Double-check you got it right, then click on the Restore button.
    When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
    Note: The term Mountain/Lion used above means Lion or Mountain Lion.
    As an alternative to the above you can try using Lion DiskMaker 2.0 that automates the process.

  • How can i install Lightroom on a second computer?

    I've been using Lightroom on my PC for years (NOT the CC version).  I want to install it on my laptop so i can use it while travelling.  I believe that the license allows for that. But how do i install it? When i try to do it from the website it takes me to a trial for CC.

    Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 5.7
    This is the trial version. But on the initial screen that displays when you start Lightroom after it is installed there is provision to indicate that you have a serial number. Choose that option and enter your serial number that you already have.

  • How can I install Photoshop on a second computer?

    I have photoshop on a computer that is about to die and I downloaded it online so I don't have the original disks to put photoshop on my new computer how can I download it again or do I have to pay for another copy?

    For future reference you are allowed to install and activate Photoshop on two computers for your own use. In this case you would want to deactivate off the old computer before it dies.

  • How can I install LR4 & CS6 on second computer?

    How can I download CS6 and LR4 to a new MacAir notebook? I have this software on my iMac. I think there is no charge for downloading to the second computer with the same OS.

    Cloud or traditional license?
    For traditional license, down the trials from the Adobe website and activate them with your serial number.

  • How can I install Lion on a second Mac?

    After the first installation nothing was left on my computer: No install file nothing except for the installed OS.

    Yes.  You needed to copy the install app to a usb drive or some such *before* installing.
    Now you will have to download again; but you won't be charged again if the same Apple ID at App Store.
    Phil

  • How can I install Aperture on my new Macbook Pro. I am up to date with my Mac Pro, I have the Aperture 1 and installation disks but cant remember how I got to 3. Can anyone help?  Many thanks regards Alf

    I have an up to date version of Aperture on my Mac Pro, and I would like to install it on my new Mac book Pro. I have the original installation disks for Aperture 1 and 2. I cant remember how I got to Aperture 3, I think it was via a web download but not sure. I have checked my purchases in the App Store but there is no indication of me buying an upgrade to Aperture 3.
    Ive tried to download it from the App Store but it wants me to pay again.
    Can anyone help on how to install Aperture 3 on my new Macbook .
    Many thanks regards  Alf

    Then you can download the Trial version of Aperture 3 and unlock it with your serial numbers - you will need all three for all three versions: A current link to the Trial version is in this support document, also instructions on how to reinstall on different systems:
    Aperture 3.4: May quit unexpectedly on launch after updating
    Regards
    Léonie
    BTW: Your Aperture 3 serial number will be displayed in the "About" panel - the panel you see, when you use the command "About Aperture" from the Aperture menu in the main menu bar.

  • How can I install Solaris 9 8/20 x86 on an Ext. USB Disk?

    I am fairly new to Solaris. Does anyone know know to do an install to a completely separate ext. USB hard disk?
    I think that it can be done since I can get through the initial installation CD with the partitions, slices, and MBR being created and the files copied over. However, when it comes time to reboot and continue, the CDA starts up from USB disk and lists 2 devices to boot -- CD & DISK. This is the problem, it keeps trying to load up from the IDE-PCI controller instead of the USB Disk. It has no problems loading from or booting up the CD.
    BTW, this is running on a Dell Inspiron 5100 with the primary disk holding Windows XP. There is no extra room left on it. That's why I'm using the ext. usb disk.

    See your post at http://forum.sun.com/thread.jsp?forum=6&thread=15932&tstart=0&trange=15

  • How can i stretch pictures in picture library webpart and remove the home tab that comes with the site

    Hello people
    how can i stretch images to fit into my picture library webpart?
    also how can i remove the Home tab that comes with change the look.

    Hi,
    Let’s verify the following:
    Whether you use the picture  library web part or Image Viewer web part or Picture Library Slideshow Web Part.
    I think you should custom the web part to stretch images to fit into your web part. There is no OOTB method to achieve it.
    Whether the home tab is your library name.
    To remove the Home tab, edit the web part->Appearance->”Chrome” choose none.
    Best Regards,
    Lisa Chen
    Lisa Chen
    TechNet Community Support

  • How can I get an image or clip in front of  the first transition with auto transition on?

    I have been trying to set up a project using auto transitions.  I cannot get a clip to start before the first transition.  The problem is when I post the project to Smugmug or FaceBook the preview box that appears is black.  I want it to show the first frame of the clip to give an indication of the content of the clip.  The only option seems to be to turn off automatic transitions and manually put them it at each break.
    Any ideas?

    What program was the artwork created in and what version of Illustrator are you using? ALWAYS provide this information first so we know what features you have available.
    If everything is native Illustrator artwork, then you can probably copy the portion of the paw you want outside the circle and use a PathFinder command to merge that shape with the circle, then put the resultant shape behind the artwork.

Maybe you are looking for