How can I install Windows 8.1 Enterprise on my Macbook Pro  With BootCamp?

How Can I Install Windows 8.1 Enterprise on my MacBook Pro?

Hi Armin.S,
I apologize, I'm a bit unclear on the exact nature of your question. If you are asking about the system requirements for running various versions of Windows under Bootcamp, or just more generally how to set up Bootcamp on your Mac, you may find the following articles/pages helpful:
Boot Camp: System requirements for Microsoft Windows operating systems
http://support.apple.com/kb/HT5634
Mac Basics: Using Windows on your Mac with Boot Camp
http://support.apple.com/kb/HT1461
Apple - Boot Camp Support
https://www.apple.com/support/bootcamp/
Regards,
- Brenden

Similar Messages

  • TS1389 Only one song won't play after authorizing my computer. I authorized it over and over. I even deauthorized all computers, and still same results. How can I fix this ? I'm using a MacBook Pro with iTunes 11

    Only one song won't play after authorizing my computer. I authorized it over and over. I even deauthorized all computers, and still same results. How can I fix this ? I'm using a MacBook Pro with iTunes 11

    Hi Deb,
    Deauthorizing all is definitely the way to go.  You will just need to authorize your computer again after, as well as your husband's.
    Here's some additional information on deauthorizing all:
    iTunes Store: About authorization and deauthorization
    http://support.apple.com/kb/ht1420
    I hope this helps!
    - Ari

  • How can I install Windows XP on my Lenovo IdeaPad S10-2 with all partitions deleted?

    Lenovo Masters:
    Good day to you all.
    I would like to ask how can I install WinXP in my S10 (no DVD drive)?  First, I want to share that I committed the mistake of using it without any anti-virus software installed.  As a result, it bugged down.  Now in my attempt to reformat it and make it as fresh as day one, I followed the steps on how to make a bootable USB drive.  I was not aware that this unit is only compatible with WinXP (I tried to upgrade to Win7).  And in the process, I deleted both partitions of the HDD.. Now I'm receiving the message "windows was not able to detect a hard drive.. blah.. blah.." dead end for me..
    Can anyone grant me his/her generosity and enlighten me on what to do? Badly need help.. Thanks! 

    you should format the partitions, i think, you haven't done it so, windows can't detect any harddisk installed or your harddisk is dead.
    try to format the disk by using windows installation ( usb ) and try to install again.
    also, check if you see your hdd under bios ( press f2 to load bios, then check bios order )
    ordering recovery discs won't help you due to you don't have any dvd-rom. i suggest you to call lenovo support line and ship your laptop back to service to reset your harddisk to its default.
    ( lenovo may charge you )

  • How do I install windows 7 drivers correctly on my macbook pro retina?

    I've installed Windows 7 Ultimate (64 bit) twice now, and each time I get on, none of the bootcamp drivers seem to be installed correctly.  This means I can't access the internet because a network adapter isn't present, and I can't play games because the NVIDIA drivers aren't there.  I've seen other people have had this problem in the past, but their fix was to download bootcamp 3.x from Apple's download site, but obviously that doesn't work now as the version is newer.
    Does anyone know how to correctly install Windows so this doesn't happen, or how to get the drivers installed correctly?
    Thank you very much for your time

    For 2 reasons, and they are about the hardware.
    1) Apple/Mac and BC restrict the way you use the computer. Maybe not for you but for me. It does not allow you to create any other parttitions for Windows to use. You can't even re-partition the BC partition into 2 drives. That will HOSE the Windows system and maybe the OS X part.
    2) Apple/Mac does not allow the use of all the hardware. You can not use both graphic cards. switch between them. Windows Must use the descrete graphics adapter which cause the system to run hotter. This is a limitation imposed by Apple as with Reall Windows PCs that have both the Interl embedded and add-on descrete graphics you can switch between them.
    Actually BC 4 has been out since Lion shipped on new Mac's. BC 4 also restricted the installation of Windows to just Win 7, no more XP. Which was what you could do with Snow Leopard and BC 3
    Message was edited by: Shootist007

  • How can I install software of a CD on my MacBook Pro 13' ?

    I have bought software (SPSS, adobe, office) to install on my Macbrook Pro 13'.
    However, the software has been delivered in CD format.
    How can I install this software on my macbook?
    Do I have to copy the CD to a USB?
    Already thanks for your tips!
    Fleur

    Fleur,
    you could borrow or buy an external CD/DVD drive with a USB connector to install the software from your CD to your MacBook Pro.

  • How can i install windows application (like hislider) on my macbook?

    Recently i'm  trying to create html slider plugin for my website. so i intall hislider software in my computer to create stunning image slider. This software is running ok, but i also like to install it on my MacBook.
    Can anyone shed any more light?

    There are presently several alternatives for running Windows on Intel Macs.
    1. Install Boot Camp 4 if you’re running 10.7 Lion http://www.apple.com/support/bootcamp/
    or Boot Camp 3 if you’re running 10.6 snow Leopard http://support.apple.com/kb/HT3777. Purchase Windows XP w/Service Pak2, Vista, or Windows 7.  Follow instructions in the Boot Camp documentation on installation of Boot Camp, creating Driver CD, and installing Windows.  Boot Camp enables you to boot the computer into OS X or Windows.
    2. Parallels Desktop for Mac and Windows XP, Vista Business, Vista Ultimate, or Windows 7.  Parallels is software virtualization that enables running Windows concurrently with OS X.
    3. VM Fusionand Windows XP, Vista Business, Vista Ultimate, or Windows 7.  VM Fusion is software virtualization that enables running Windows concurrently with OS X.
    4. CrossOver which enables running many Windows applications without having to install Windows.  The Windows applications can run concurrently with OS X.
    5. VirtualBox is a new Open Source freeware virtual machine such as VM Fusion and Parallels that was developed by Solaris.  It is not as fully developed for the Mac as Parallels and VM Fusion.
      6. Last is Q.  Q is a freeware emulator that is compatible with Intel Macs.  It is much slower than the virtualization software, Parallels and VM Fusion.

  • How can I install my CS2 upgrade to my new macbook pro?

    Help! I have a new Macbook pro and an old upgrade of CS2 photoshop (upgraded from Photoshop 6). I bought these two for a PC and was told in the Mac shop that I could run them on my fancy new machine..........apparently not, it won't install classic photoshop 6 as presumably it's too old. I also have CS2 Indesign but can't find the install button to press for that either......Am I screwed? I can't afford new programmes.

    CS2 is the oldest version that can be upgraded to CS5. You may want to do that now before you lose the opportunity when CS6 comes out. You can upgrade and crossgrade to CS5 for Mac.
    Another thought...
    I run CS2 for Windows on Linux through Wine. It works fine. You could probably install Wine on Mac and do the same.
    The salespeople might have been referring to running your Windows software on Mac with a virtual machine... with the help of such apps as VMWare Fusion or Parallels. These let you run Windows on top of Mac OS X without rebooting into a Windows partition. See the marketing line: "It Runs Windows Too".

  • How can I install epson stylus nx625 driver on my Macbook Pro?

    I've spent a frustrating few hours today going back and forth between Apple tech support and Epson tech support and still do not have a solution to what should be a simple problem.  I got a new MacBook Pro as a work computer and want to install my home printer on it so that I can print when working from home.  The printer is an Epson Stylus NX 625 all in one.
    The directions on Epson's website indicate that the only way to install is use the "Software Update" function by going to the Apple icon on the upper left corner.  When doing this, the system looks for an update and finds nothing.  Printer is connected to the MacBook  via usb cable and is also on my wireless network.  I called Apple tech support and they said they don't have a driver for this Epson device and I should contact Epson.  I called Epson tech support and they say that they don't even have the driver for this device on their website because "Apple has signed off on ownership of this driver and only they can deliver this to you via their software update".   Can anyone help?
    I am running Mountain Lion, OS X 10.8.1
    Thanks for any assistance provided.

    Patrickdom wrote:
    The directions on Epson's website indicate that the only way to install is use the "Software Update" function by going to the Apple icon on the upper left corner.
    I am running Mountain Lion, OS X 10.8.1
    Thanks for any assistance provided.
    Epson Stylus NX 625 drivers for Mountain Lion.

  • How do I install creative suite already bought onto my macbook pro with no disk drive?

    HI. I have creative suite 6 on my imac. The licence is for 3 computers.  How do I download it onto my new macbook pro that has no disc drive?
    Help? Cheers

    You have a disk drive on your MacBook Pro. You may not have a DVD or CD drive.
    You download Creative Suite 6 from this link (look at the bottom of the page):
    Download and Installation Help

  • How can I sync the contacts from outlook on my macbook pro with my iPhone

    My iPhone 5 is backing up on iCloud and my music, etc is syncing through iTunes (11.4) on my MacBook Pro 2.5 GHz Intel Core i5 4GB 1600 MHz DDR3 but my calendar and contacts from Outlook 2011 are not syncing.  Does anyone know which settings I may need to change?  I have updated my operating system to OS X 10.9.4 and iTunes.

    You'll need to find a way to export your Outlook contacts and calendar to Apple's Contacts and Calendar applications. There are some paid software apps that can do this but I don't know of any free way other than exporting each event/contact individually. Outlook 2011, when it first came out, synced well with iCal and Address Book (or whatever it was called) but that's no longer the case... maybe when Office for Mac 2014 comes out?
    Sorry that I don't have an answer to what seems to be a common problem.
    Clinton
    MacBook Pro (15-inch Late 2011), OS X Mavericks 10.9.5, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

  • How can i install lion for free in my new macbook pro?

    because i read that i can get it for free if i bought it after the june 6th

    Go here >  Apple - OS X Lion and Lion Server - Up to Date Program
    Then click "Redeem from the Apple Online Store"
    If you have problems there, click here >
    OS X Lion Hardware Up-to-Date Program - Step 1

  • How do I install CS6 Design Standard on a 13" Macbook Pro with no disk drive

    I have the serial code from online registration but dont know how to install without the disk!

    Welcome to Apple Support Communities
    If you have the application on a DVD, you have two options:
    1. If you have another PC or Mac, use Remote Disc to install the app > http://support.apple.com/kb/HT5287?viewlocale=en_US
    2. Buy an external DVD drive and use it to install Adobe CS6 Design

  • How can i erase all my data off my old macbook pro with a damaged screen?

    screen is badly damaged (it was stepped on while closed) but computer works fine........
    before trying to either sell it for parts or sell to a friend who could connect a screen i want to remove all of my things off the memory and from all programs. is this possible?

    My computer is not working, is my personal data lost?
    Install/upgrade RAM or storage drive in Mac's

  • How can I install windows 7 on MBA

    HI ,
    Can some one help me to solve how can I install Windows 7 64 bits on my Macbook air 13" on Max OS X Mavericks
    I tried to follow what they recomend bout bothing happend
    Boot camp assistance does help me anything. I don't know why it is so complicate and verry tricky

    Follow the instructions in the manual >  manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_10.8.p df

  • How can i install windows games in my macbook pro

    I m a game lover but since i've macbook pro,i haven't played any game on my macbook...so guys please tell me how can i install windows games to my macbook pro.

    As eww said, that computer isn't specifically made for gaming. To get advanced graphics in a game, your computer needs what is called a "discrete" graphics processor, or GPU. This means a seperate chip that processes graphics. In Apple laptops, these are only found in the 15" and 17" MacBook Pro. It is not common to find these in laptops in general that are not expensive and high-end. What you have in yours is an "on-board" or "integrated" GPU. This means that graphics processing is done by a small portion of your main processor (the Intel i5 board). This takes away a portion of primary prossessing and dedicates it to graphics. This works perfectly find in most scenarios, but video rendering, gaming, and 3-D graphics tend to suffer. Most high-end, modern games require discrete GPUs to run at full quality these days.
    As far as running Windows 7 and Mac OS both, yes you absolutely can. If you install Windows 7 via Bootcamp (this would require you to have a Windows 7 CD), when you turn on your computer it will default to opening up in Mac OS. But if you hold down the Option key (bottom of the keyboard next to the Command button) while the computer is booting up, it will ask you if you want to open Windows or Mac OS.

Maybe you are looking for