How can I instantiate and load a new CachedRowSet object from a non-JDBC so

How can I instantiate and load a new CachedRowSet object from a non-JDBC source?
cheers

webrowset reads whole data;
I would rather need to get data line by line

Similar Messages

How can i add and configure a new AIR-LAP1142N-E-K9 Access Point to a AIR-WLC4402-12-K9 WLAN controller

How can i add and configure a new AIR-LAP1142N-E-K9 Access Point to a AIR-WLC4402-12-K9 WLAN controller

Thanks alot, that helped me .....
what about option 43..i am using one wlc and the switch where wlac and APs are connected is playing the role of dhcp server used by APs as there is a dhcp pool configured. please advise. will the command be
option 43 hex (f104xxxxxxxxxxxx) f104 adding to it the management ip address of the wlac in hexadecimal.
if the ip address is 192.168.10.5 then the command will be
option 43 hex f104c0a80a05
please correct me if i am wrong!!!!

The Safari on my iMac is no longer supported, how can I download and install a new version?

The Safari browser on my iMac OSX 10.6.8 is no longer supported. How can I download and install a supported Safari browser?

If you’re running Safari 5.1.10, you need to either upgrade the computer’s OS or switch browsers.
To upgrade, open the Mac App Store and try downloading Yosemite. If you get told it's incompatible, choose About this Mac from the Apple menu, check if the computer has at least a Xeon or Core 2 Duo(not Core Duo) CPU and 2GB of RAM, and if it does, click here and order a download code for Lion 10.7.
Back up your data and check your applications for compatibility before upgrading. In particular, Mac OS X 10.7 and newer don't support PowerPC programs such as versions of Microsoft Office prior to 2008.
(123754)

How can i resset and create a new password cause i forgot my password and i can't connect anymore?

how can I get a new password because I forgot my password

connect the iPod to your syncing computer and restore it via iTunes. If it asks for the unknown passcode, place the iPod in recovery mode and then restore it. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

How can I Save and Load the Configuration File of a VNA HP8510C with LabView

Hello, I'm working with a HP8510C. In order to simplfy the use, I try to save and to load the configuration file. Actually, such files are saved in the HP8510C, but there is only 4 places to save. It will be more interresting when I can storage this file in the computer with Labview. I don't have found anything about in the Documentation.
Has someone already deal with such a question?
Géraud DEVOS
IWE Karlsruhe

geraudIWE a écrit:
Hello, I'm working with a HP8510C. In order to simplfy the use, I try to save and to load the configuration file. Actually, such files are saved in the HP8510C, but there is only 4 places to save. It will be more interresting when I can storage this file in the computer with Labview. I don't have found anything about in the Documentation.
Has someone already deal with such a question?
Géraud DEVOS
IWE Karlsruhe
Hello GerauIWE,
Have you try to use the Hewlett-Packard 8510C Instrument Driver?
You can download it on :
http://sine.ni.com/apps/we/niid_web_display.drv_results?p_app_area=&p_man=hewlettPackard&p_keywords=8510c&p_inst_type=&p_env=845&p_drv_type=&p_int=
Best Regards,
Sanaa T
National Instruments France
Sanaa T.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> http://www.nidays.fr/images/081110_ban_nidays09_468X60.gif

How can i save and load .txt files

right now i am writing an encryption prog but can't figure out how to save the encrypted text or load encrypted text for decrypting. can someone help me?

java.io.FileWriter/FileReader

How can i send and receive a 2us digital pulse from Labview

i want to communicate with a system using 2us pulse
like if i want to send 11010100 then i will send
|----2US----|----2US----|.............
I I___I I_____________I I______________I I_______________________
|----1-----|-------1-------|------0-------|--------1--------|------0-------|---------1---------|------0-------|------0-------|
when i will send 11010100 to system the system will repond me by sending 10111001 usinf same 2us pulse as i have shown above.
I have pci-6025E+CB 50LP connector block+Cable and LABVIEW 10 installed in my PC.
Can this be done using NI's labview and PCI card ?
if yes then how ?
i m new to NI and this is my first Project using NI's hardware.

The fastest I would trust software timing is in the tens of milliseconds. And even then, don't count on exactness. The software timed DIO are best used for static applications (only change every once in awhile, usually controlling a relay or the like). From my quick search, you will want something like the PCI-6220.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

How can i attach and send a document via email from my iphone?

I could not find an option to attach a document from my iphone as i have lot of official responsibilities it's very difficult sent such mails.

To remove your facebook contacts go to SETTINGS / FACEBOOK and toggle off CONTACTS.

How can I boot to a fakeRAID -Raid0 set drive from a non-raid hdd

Hi all,
First of all, my English is bad and I hope I can explain it what my problem is. Secondly, I need your expert help with my problem right now.
I'll just layout some hardware information and some history before I start. Currently, my motherboard has 3 hdd controllers which are:
1) Intel - 6 ports --> contains 2 sets of RAID drives = 2 x 60gb SSD (boot drive) and 2 x 500gb HDD (data drive) both in RAID 0
2) Jmicron - 2 ports --> 1 port is used by the DVDROM
3) Marvell - 2 ports --> I don't use these ports as they are slow and are so bad - currently disabled in BIOS
HISTORY: Before, my 2 x 60gb SSDs (RAID 0) contained Arch 64 + Windows 7 64 with Grub as the main bootloader. I remembered having a hard time setting up intel fakeraid with Arch linux + Win7 dual boot before, but fortunately, with your help, I found the solution and I've been using it ever since until today.
NOW is kind of a different issue. I bought a new 60gb SSD (just one). I totally reformatted everything with my 2 x 60gb SSD Raid 0 and I decided to just use that exclusively for windows, still in RAID 0. My brand new SSD will ONLY have Arch64 on it. So I installed Windows 7 first on my Raid SSD set. I plugged my new SSD to the Jmicron port so I can take advantage of AHCI. I don't want to mix my new SSD to the Intel Controllers since its not RAID anyway. Anyway, I installed Arch 64 on the new SSD in the JMicron Port fine.
Now here comes the problem, I set the Jmicron port where the Arch is installed to be the primary boot in the BIOS (since GRUB is there) and I can't boot to Windows! It gives me an error that It can't find the target drive (Win7 in the Raid 0 - intel ports). I've tried modifying the menu.lst and trying so many combinations and It still fails. Of course, I can boot to Arch fine since the drive is independent. It looks like grub legacy can't boot to fakeRaid drives if its not installed on that same drive.
Can you give me advice on how to fix this issue?
Also, I was just thinking, is there a 3rd party Windows Bootloader, that can be installed in Raid 0, that can pick up Linux and boot from it. I was thinking of just making the Windows 7 as primary boot in BIOS, with a 3rd party bootloader, then just boot to Arch.
Thank you!

Yes, I have redirected my User folder to the D: drive.
I know that some shared components must reside on the C: drive; that's fine. I just don't have room for the entire installation on there.
The real issue here is that, when a drive other than C: is selected as the destination, the CS6 package installs into a broken state every time, out of the gate, on my system. Some components get installed to D: and some to C:, but the various components of the programs seem confused about what exists where, as shown below:
I select a folder on D: as the destination folder for the install, and here is what I get:
64-bit versions of the package -- Program files are installed to the D: drive as specified, but attempting to start them results in a configuration error message stating that the program must be uninstalled and reinstalled, and lists "Error code: 1".
32-bit versions of the package -- Program files are installed to the C: drive against what I specified. The shortcuts installed in the Start menu for the 32-bit versions point to the locations where these program files SHOULD be, on the D: drive. If the Adobe folder containing the program files is copied over to the correct location on D:, these programs function normally with no errors.
I have the 32-bit versions working by copying the program files from C: to D:. I just want to get the 64-bit versions working as well.
Any help you could give would be greatly appreciated; I'm really looking forward to testing the CS6 suite on my system!

How can we contrrol the focus of an form Object from the Managed bean??

I am getting the following script error...
Can't move the focus to the control because it is invisible or not enabled or of the type that does not accept the focus...
I have a button whose action is mapped to a function in the Managed bean.
In the managed bean
I am making the button Invisible along with some other components.
Can any one help me out....

@BalusC
You were proposing the following solution in other thread..
<html>
<head>
</head>
<body>
<f:verbatim>
<script>
setFocus('</f:verbatim><h:outputText value="#{myBean.focusId}" /><f:verbatim>');
</script>
</f:verbatim>
</body>
</html>
But it is giving the following error
javax.faces.FacesException: org.apache.jasper.JasperException: /EducationDetails.jsp(97,29) The element type "script" must be terminated by the matching end-tag "</script>".

How can I delete and start new loading my shuffle?

How can I erase and start all over loading my shuffle?
Pari

Restore the iPod Shuffle to factory settings in iTunes using the instructions in this Apple support document.
http://support.apple.com/kb/ht1481
B-rock

How can i view and apply new custom patterns without going to preset manager? i had this facility but have now lost it

how can i view and apply new custom patterns without going to preset manager? i had this facility but have now lost it. i design patterns but am fairly new to photoshop. i used to be able to click on the drop down menu in patterns in the 'fill' box but cannot now do this. have i inadvertently clicked on something to turn this facility off? i now have to go to 'preset manager' and manually move my new design to the first box and click 'done' so that i can use it.

Which version of photoshop are you using?
After you define a custom pattern it should be added to the bottom of whatever patterns are already loaded.
For example, if you define a custom pattern and then go to Edit>Fill>Pattern, the newly defined pattern should have been added to the existing loaded patterns.

My itunes is on an old computer. So old that I can't update it and so Haven't used it in two years. How can I move it to my new laptop and make sure this doesn't happen again? Very frustrated that I've spend $$ but can't get my music.

My itunes is on an old computer. So old that I can't update it and so Haven't used it in two years. How can I move it to my new laptop and make sure this doesn't happen again? Very frustrated that I've spend $$ but can't get my music.
I want so set up itunes on my laptop and make sure that I get all of my old music and any music shared from my sons' itunes accounts. Do I have to set up itunes on my new laptop first and then use the same logins? Really concerned about losing any music, etc.

These are two possible approaches that will normally work to move an existing library to a new computer.
Method 1
Backup the library with this User Tip.
Deauthorize the old computer if you no longer want to access protected content on it.
Restore the backup to your new computer using the same tool used to back it up.
Keep your backup up-to-date in future.
Method 2
Connect the two computers to the same network. Share your <User's Music> folder from the old computer and copy the entire iTunes library folder into the <User's Music> folder on the new one. Again, deauthorize the old computer if no longer required.
Both methods should give the new computer a working clone of the library that was on the old one. As far as iTunes is concerned this is still the "home" library for your devices so you shouldn't have any issues with iTunes wanting to erase and reload.
I'd recommend method 1 since it establishes an ongoing backup for your library.
Note if you have failed to move contacts and calendar items across you should create one dummy entry of each in your new profile and iTunes should merge the existing data from the device.
If your media folder has been split out from the main iTunes folder you may need to do some preparatory work to make it easier to move. See make a split library portable.
Should you be in the unfortunate position where you are no longer able to access your original library or a backup then then see Recover your iTunes library from your iPod or iOS device for advice on how to set up your devices with a new library with the maximum preservation of data.
tt2

HT204053 I changed my email address and iphoto is using my old email address. How can I change it to my new address?

I have a new email address. I am trying to send photos from my imac using iphoto. The old email address is not active. How can I
change it to my new email address to send iphotos?

Welcome to the Apple Community.
First change it with Apple, Start here, change your country if necessary and go to manage your account
Then change it on your device. In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
When you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.

Iv'e synced and backed up my ipod onto my old laptop which has now broken, how can i sync and back it up on a new computer without everything being lost?

Ive synced and backed up my iPod onto my old laptop which has now broken, how can i sync and bakc it up onto a new computer without everything being wiped?

you will have to plug it into your new computer and connect it to itunes, then hit the backup button it should start backing up. THERE YOU GO! HOPE IT HELPED! please hit the "this solved my question" button

How can I instantiate and load a new CachedRowSet object from a non-JDBC so

Similar Messages

Maybe you are looking for