How can I keep emails and read later when off line please

How can I keep email to read later when off line please

I'm not sure how it works on your iPad, but once the email has been downloaded onto my iPad, I can read them even in Airplane mode with WiFi disabled. I don't see the images that are in the emails, but I can read the messages. I have one POP account and three IMAP accounts and it works for all four accounts.

Similar Messages

How can i keep mine and my husbands contacts from combining when syncing phone

How can i keep mine and my husbands contacts from combining when syncing our phones

Don't sync each iPhone with the same supported address book app on the shared computer.
There are a number of free email accounts that support syncing contacts over the air such as with a free iCloud account, with a Yahoo account, Gmail account, and Hotmail account.
Do that instead with different accounts for each of you and no longer sync contacts direct with a supported address book app on your computer.

How can I keep music and audio books organized on external drive

how can I keep music and audio books organized on external drive

Hi RUEDIFISH,
Thanks for visiting Apple Support Communities.
You may find these articles helpful with moving your iTunes library to an external drive:
iTunes for Mac: Moving your iTunes Media folder
http://support.apple.com/kb/ht1449
iTunes: Back up your iTunes library by copying to an external hard drive
http://support.apple.com/kb/HT1751
Best,
Jeremy

How can i send email for suport to rest my questions' please helpe'

how can i send email for suport to rest my questions' please helpe'

You need to ask Apple to reset your security questions; this can be done by clicking here and picking a method, or if your country isn't listed, filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(109789)

How can I keep a playlist on phone when syncing with new computer?

When syncing my IPhone I am prompted with an ominous message that says "Are you sure you want to remove the existing music ... from this phone and sync with this ITunes library? Music .... will be removed and items will be synced from this ITunes library" The answer is no because I have a playlist I would like to keep on the phone, but add one which resides on the computer I am attempting to sync with. That is not an choice presented, the choices are Cancel or Remove and Sync. Apple should either give more options or at least a better explanation. I have synced this phone and computer combination before but have since created a new playlist in the computer (a Mac Mini).
So how can I keep a playlist on the phone and add one from the computer too? Is it possible to view the phone as a drive and move items around in that manner? I use ITunes on both Windows and Mac platforms but this issue has always been problem for me. I also have IPhone 3 (used as an IPod), IPhone 4S and Iphone 5.

Unless you can get the iPod backup file (and restore the iPod from that file on your new computer) from the "dead" computer you will lose all the app data you can export via email.
- Yu can trabsfer iTnes purchases from the iPod by:
iTunes Store: Transferring purchases from your iPhone, iPad, or iPod to a computer
- You can transfer non-itunes purchased music to the new computer by using one of the third-party programs discussed in this previous discussion.
Best iPod to PC
- After you move the stuff to the new computer, either restore the iPod from the backup, or if no backup, restore to factory defaults,new iPod and sync.

TS4002 iCloud for email is not on my Mac. How can I get email and iCal to sync with iphone and ipad.

iCloud for email is not on my Mac. It should be under Internet and wireless in System Preferences but it is not. Basically I am trying to get iCloud running successfully on my Mac for email and Calendar so that it will sync with my iPad and iPhone. I was an MobilMe customer and I've been having trouble with this conversion to iCloud. Thanks.

I too was a mobileme user and have just migrated to iCloud on mackbook pro w/OS 10.7.4. Transition caused my sent mailboxes to rearrange themselves so that I have no comprehensive 'sent' mailbox as I did previously and the view on both incoming and outgoing mailboxes keeps rearranging itself no matter how many times I set preferences. One result is that search function no longer works. Is anyone else having problems like this? All was fine for a week after transition but after having an evening when my password was repeatedly rejected I had to log in and out of iCloud (as directed by tech support) and w/in an hour or so the mailbox problem began.

How can one transfer emails and contacts from Zimbra to gmail, without it being deleted if the Zimbra account is shut down?

How can one move Zimbra Contact list and emails to a gmail account, so they won't be deleted if the Zimbra account is shut down?

What does this have to do with iPhones or anything else Apple related. Contact Zimbra and ask them...

How can I keep songs and apps that were downloaded by a former roommate?

My pc says songs or apps are not authorized by this computer because my former roommate purchased them...can I keep these songs?

They are not your songs and you have no legal right to them.
Sorry.

How can I keep a state machine readable when using large amounts of in/outputs

Hello, I am new to Labview,
Read trough the fundamentals and the
getting started and a lot of examples.
What I want to do is use a standard
state machine from the template, and add some stages, for example
orange, apple, banana. At this point I can use numeric controls to
put in the amount of oranges, apples, bananas there are. I can even
use a led to tell the user which state of the state-machine is
active.
The thing is there will be more numeric
controls and more leds and it would be nice if the code would still
be readable when there are 20 inputs and 20 outputs.
Questions
(1) It would be nice if I could use the
typedef to select the right state AND the corresponding numeric
controls and leds out of a cluster or an array kind of structure to
keep the number of wires low. Is this possible, how can I do this?
(2) I tried to put the numeric controls
into a cluster but that way I can't put the numeric control for the
apples in the upper right corner and the numeric control for the
oranges in the lower left down corner of the front panel.
(3) An example would be really nice, I
know that I saw some examples describing this problem but there are
so many examples that after a few hours of searching I haven't found
the right one yet.
Thanks in advance for the effort.
p.s. I will not use Labview to do
calculations on fruit, I am only using this to make the question
easier to understand.

I can only start a proper answer but I might as well start with that.
When I am developing State Machines I have to think about what data is used and manipulated in each state. I then have to think about where am i going to keep and manage the data. I list all of the fields that are "touched" in each state and what values are used together and which are independent form the others. After this phase of the analysis, I usually have some data structure defined (cluser array etc).
Then I flipp from thinking about the state to thinking about the data (after all this is LabVIEW and the data-flow paradigm is critical). If I see data that is only used by the State machine and is used in many of the states, then the data structure get put in a shift-register for easy access in each state. This maybe enough of an answer for your fruity question.
When i see data that is shared or only used in a handful of states then I concider putting the data in an Action Engine. Depending on how you design your AE, you can access each of the fruit totoal by name or increment etc as required.
If your app demands many fileds that are all related (can't be broken into distinct data structures) then create a cluster that has all of your values that are used by the AE. Then create an Wrapper VI for each call of the AE but only put the associated fields on the FP of the wrapper and then bundle that value into the cluster and invoke the AE.
Ben
PS: Sorry about reverting to neBulus mode but this topic could take days to cover in detail.
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How can I write left and right in the same line of a richtextbox?

I want to write, in the same line, text with a right aligment and other with left aligment. How can I do it?
thanks

I want to write, in the same line, text with a right aligment and other with left aligment. How can I do it?
thanks
As
Viorel_ says "Perhaps there are other much easier solutions. For example, create two
RichTextBoxes with no borders (if you only need two columns of text)" but the real issue would be saving the info in the RichTextBox's (RTB's) RTF or Text to two different RTF or TextFiles. Although I suppose if it was just going to
a TextFile then you could somehow use a delimited text file so each same line number of each RTB is appended to the same line and delimited. That way you could probably load a split array with each line from the text file splitting on the delimeter per line
and providing RTB1 with index 0 of the split array and RTB2 with index 1 of the split array. I'm not going to try that.
This is some leftover code from a long time ago. It has three RTB's. RTB1 is there I suppose because the thread asking for this code wanted it. RTB2 is borderless as well as RTB3. The Aqua control in the top image below is the Panel used to cover RTB2's
scrollbar. So RTB3's scrollbar is used to scroll both controls.
I forgot to test if I typed past the scroll position in RTB2 if both would scroll as maybe RTB3 would not since it would not have anything to scroll to I suppose.
Maybe this code can help or maybe not. The bottom two images are the app running and displaying nothing scrolled in RTB2 and RTB3 then the scroll used in the bottom image.
Disregard the commented out code in the code below. It was there so I left it there. I suppose you should delete it. Also I didn't set the RTB's so one was left aligned and the other right aligned. I believe the Panel becomes a control in RTB2's controls
when it is moved to cover RTB2's vertical scrollbar but don't remember although that seems the case since both RTB2 and RTB3 are brought to front so if the Panel was not one of RTB2's controls I would think it would be behind RTB2 and RTB2's vertical scrollbar
would display but don't remember now. In fact I don't really remember how that part works. :)
Option Strict On
Public Class Form1
Declare Function SendMessage Lib "user32.dll" Alias "SendMessageW" (ByVal hWnd As IntPtr, ByVal msg As Integer, ByVal wParam As Integer, ByRef lParam As Point) As Integer
Const WM_USER As Integer = &H400
Const EM_GETSCROLLPOS As Integer = WM_USER + 221
Const EM_SETSCROLLPOS As Integer = WM_USER + 222
Dim FixTheProblem As New List(Of String)
Private Sub Form1_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Me.CenterToScreen()
Panel1.BackColor = Color.White
Panel1.BorderStyle = BorderStyle.Fixed3D
RichTextBox2.BorderStyle = BorderStyle.None
RichTextBox2.ScrollBars = RichTextBoxScrollBars.Vertical
RichTextBox3.BorderStyle = BorderStyle.None
RichTextBox3.ScrollBars = RichTextBoxScrollBars.Vertical
RichTextBox3.Size = RichTextBox2.Size
RichTextBox3.Top = RichTextBox2.Top
RichTextBox3.Left = RichTextBox2.Right - 20
Panel1.Size = New Size(RichTextBox2.Width * 2 - 16, RichTextBox2.Height + 4)
Panel1.Left = RichTextBox2.Left - 2
Panel1.Top = RichTextBox2.Top - 2
RichTextBox2.BringToFront()
RichTextBox3.BringToFront()
FixTheProblem.Add("Curry: £6.50")
FixTheProblem.Add("Mineral Water: £4.50")
FixTheProblem.Add("Crisp Packet: £3.60")
FixTheProblem.Add("Sweat Tea: £2.23")
FixTheProblem.Add("Motor Oil: £12.50")
FixTheProblem.Add("Coca Cola: £.75")
FixTheProblem.Add("Petrol Liter: £3.75")
FixTheProblem.Add("Shaved Ice: £.50")
FixTheProblem.Add("Marlboro: £2.20")
FixTheProblem.Add("Newspaper: £.25")
FixTheProblem.Add("Spice Pack: £.75")
FixTheProblem.Add("Salt: £.50")
FixTheProblem.Add("Pepper: £.30")
For Each Item In FixTheProblem
RichTextBox1.AppendText(Item & vbCrLf)
Next
RichTextBox1.SelectionStart = 0
RichTextBox1.ScrollToCaret()
Dim Fix As String = ""
For Each Item In FixTheProblem
Fix += Item.Replace(":", "^:") & vbCrLf
Next
Fix = Fix.Replace(vbCrLf, "^>")
Dim FixSplit() As String = Fix.Split("^"c)
For i = 0 To FixSplit.Count - 1
If CBool(i Mod 2 = 0) = True Then
RichTextBox2.AppendText(FixSplit(i).Replace(">"c, "") & vbCrLf)
ElseIf CBool(i Mod 2 = 0) = False Then
RichTextBox3.AppendText(FixSplit(i) & vbCrLf)
End If
Next
End Sub
Dim RTB2ScrollPoint As Point
Private Sub RichTextBox2_Vscroll(sender As Object, e As EventArgs) Handles RichTextBox2.VScroll
Dim RTB2ScrollPoint As Point
SendMessage(RichTextBox2.Handle, EM_GETSCROLLPOS, 0, RTB2ScrollPoint)
SendMessage(RichTextBox3.Handle, EM_SETSCROLLPOS, 0, New Point(RTB2ScrollPoint.X, RTB2ScrollPoint.Y))
'Me.Text = RTB2ScrollPoint.X.ToString & " .. " & RTB2ScrollPoint.Y.ToString
End Sub
Private Sub RichTextBox3_Vscroll(sender As Object, e As EventArgs) Handles RichTextBox3.VScroll
Dim RTB3ScrollPoint As Point
SendMessage(RichTextBox3.Handle, EM_GETSCROLLPOS, 0, RTB3ScrollPoint)
SendMessage(RichTextBox2.Handle, EM_SETSCROLLPOS, 0, New Point(RTB3ScrollPoint.X, RTB3ScrollPoint.Y))
'SendMessage(RichTextBox2.Handle, EM_SETSCROLLPOS, 0, New Point(0, 10))
End Sub
End Class
La vida loca

On Illustrator CS6 (Mac OS) how can I keep an open file minimized when opening other files?

I work with several files at a time and it can become annoying when you open several files and a minimized file keeps opening after each one. I don't want to have it open in the background, I just want it to stay minimized until I'm ready to work with it.
Thanks in advance

Hi Lytle,
Let me clarify few more things here. There is an option Window>Arrange>Float in Window / Float All in Windows. You can use this option to float all your documents i.e. make them in separate document window. Now you can minimize these individual windows. But, when you open any more document your last active document window will come into focus. To avoid disturbing minimized state of other documents you can keep a blank document floating and before opening any document make it active and then open any new document. This is a kind of workaround to get rid of this issue.
Hope it helps!
Thanks!
Dhirendra

How can I save a previously published web page off-line instead of deleting

I have some web pages with photos I do not want to post anymore on my iWeb site. However, I do not want to "delete" the pages because I spent so much time putting them together. Is there a way to save them off-line somewhere for access later on? I am a Scoutmaster and post photo pages of our hikes and adventures. I prefer to save my "masterpiece" pages somewhere for future reference instead of deleting them, which is the only option, to make room for more pages.
Thank you so much for assisting me.
p.s. Is there a number limit to the amount of photos I can drag over from iPhoto to an iWeb photo page?
iMac, Powerbook G4, MacBook Pro Mac OS X (10.4.10) Love Macs. I've owned a Mac since the 128 in 1984.

See this article: "Separating Sites in a single Domain"...
http://web.mac.com/mark8heaton/iWeb/DomainSeparation/SiteSeparation.html
iWeb's Help viewer says: "The photo grid holds up to 99 photos." But you can have multiple Photos pages and create a living, growing photo gallery...
http://www.mac.com/web/en/Tips/013C4180-4787-4847-BAAB-319222AFC652.html

How do I save the "Slide Show" functions when off line ?

I'm working on an interative porfolio (to use off line) using IWeb. But once saved in a folder on my computer, the Slide Show functions (black background, reflection effects, sliding thumbnails, etc.) are not existing (?)
By the way, can anybody tell me about a good (and simple to use !) shareware for editing iteractive slideshows ?
Thanks !

Thanks a lot !
Those links are perfect !
The slideshow effects you mention are only available
when you publish to .Mac.
It is possible to enhance the slideshow you get when
you publish to a folder, but you need the help of
third-party expertise. Your first port of call should
be here:
http://www.geocities.com/[email protected]/iWeb.htm
l
As an alternative, you might also like to take a look
at the first post in this Discussions topic:
http://discussions.apple.com/thread.jspa?threadID=3132
01&tstart=0
[ Visit here
for iWeb Tips, Tricks and Hacks ]

What exactly is using data and how can i keep it from using data when im not using my phone?

So i have an iphone 4 and i have used a lot of data this month(like almost 2GB) and i have barely touched my phone outside of wifi areas. I always shut down any apps that use data like youtube, funnypics, facebook, etc. but i do play some games during my breaks at work but they dont require data to play so to my knowledge those games arent using data(or are they?) i just need some help figuring out exactly what on my phone is using data all the time so i can turn it off. Is it icloud? Emails on auto update? Offline game apps(minecraft, sonic dash, the Mr. Series games?) Do all apps use data regardless? Somebody please answer me. And No im not buying a bigger data plan. 2GB is my limit but it seems as though i am hitting that easily with my iphone but the rest of my familyis usually miles away from 2GB and they all have Samsung Galaxy S4s.

My first stop would be in Settings > Cellular if you are on iOS 7. This has a lot of goodstuff. you can turn off cellular data as a who, see your current usage and even see which apps have used data and how much. You can even turn off individual apps form using cellular data (restricting them to wifi only).
I hope this helps!

How can I recover bookmarks and reading list?

Firefox crashed as soon as I tried to use it so I uninstalled it and installed it back again, but all the bookmarks and pages on my Reading List are gone. Is there a way to get them back?

Hello,
Sorry to hear that you lost what you wanted to keep a track of. Did you have Firefox sync on? With that you can be able to restore your bookmarks but apart from that it's impossible to my knowledge that you'll be able to restore deleted bookmarks.

How can I keep emails and read later when off line please

Similar Messages

Maybe you are looking for