How can I keep the field in the same page

How can I keep the field in master frame in the same page of the detail frame?
They are in the different pages sometimes?
Thank you.

I believe the OP has a question similar to mine...
I have several groups, and the master for each group is only one line, and the detail is between 1 and five lines, like so:
A
A1
A2
B
B1
C
C1
C2
C3
...The problem is, sometimes only the master record gets printed at the bottom of the page, and then the detail is printed at the top of the next page. I don't need each group on it's own page. I just want to be sure that if the detail can't fit on the page with the master, then I want the master to only print on the next page.
Can you help with this?

Similar Messages

How can I format a field in the form creator?

How can I format a field in the form creator? It's putting the same text in all the fields within a table. I want each field within the table to have different text. As soon as you click out of the table, all the text is the same.
I even changed the fields from a text box to a drop-down list so a person can make their selection, which will be a quantity from 0-9. There are two of these such fields. You make your selection in each, click off the table and both fields show whatever I selected in field 1. The original Qty I selected in the bottom field was a 5 but it changed it to whatever is in the top field on it's own. I've added a screen shot.

This behaviors usually happens when you create the fields but a copy paste command from one of the fields. The copy paste command assumes that your intentions is to maintain a copy of the field in two separate locations (e.i, a form field "company name" printed in each and every page of a multi-page form document.
Go to the properties fields of each field and make sure to assign unique form field names.

How can we add additional fields to the BP Search RESULT screen?

Dear Experts,
How can we add additional fields to the BP Search RESULT screen so that the BP's being displayed in a search result show maintained values for the particular column/field?
Thanks!!!

Hi Laxman,
I got same requirement for ibase hierarchy.I want to add new fields in Ibase hierarchy AB.Do you have any idea regarding this.My requirement is that ,i want to dispaly a fields as a check box which display that this component is in under warranty or not by checking the box.Plz tell ,how can i add a new field in tree type context node.I add a new fields using AET ,but that is not available in that AB.
Thanks
Vishwas Sahu
Edited by: vishwas sahu on Nov 17, 2009 1:51 PM
Edited by: vishwas sahu on Nov 18, 2009 5:22 AM

How can i add Custom fields into the

Dear Experts
We have Ecc6.0 system,
How can i add Custom fields into the Infotype Screen(PA30),i heard that we do it by PM01 Tcode.
But in PM01 i am unable to find the enhance infotype tab.
How can i do it ....pls help.....
Regards
Sajid

Hi,
Do it thru the third tab : Single Screen.
There write down the infotype number (e.g. 0022) and say generate objects.
Regards,
Dilek

How can I have two fields with the same name if it makes sense?

Hello, folks :)
I have a pretty hard time figuring out how I can have two text fields with the same binding name.
The whole problem is that when I need two fields with the same binding name they are still differnent coz they have the same name but differnt indices.
I should make a form filled at runtime by merging a pdf form file and an fdf file data file. And I have no choice to do it differently. And my form file needs some data like customerName, companyName twice in one form. But there's only one possible buinding name indexed zero.
How can I create a field with absolutely the same name or is it just impossible due to possible name conflicts? And is there a workaround to this problem? I just need one piece of data repeated in different places.
Thanks for your replies :)
P.S. if u think that the problem is not clear enough let me know. I'll supply you with more details. But the general process can not be changed.
One pdf should be mergred with an fdf with as the result of their merge a new filled and flattened form. I have no control over fdfs their are generated by Oracle and I can not fill the form using XML files coz this process should be integrated in a working application.

I just thought about a really ugly workaround with a server-side script adding values to fdf files but it's a bit of work and tests and personally i think it's a bad idea :-(

How can I keep my signature on the left side when using rtl on mail application

I'm writing in Hebrew & English on apple Mail application on OS X /mountain Lion.
When I'm starting to write a mail in HEBREW it's automatically move the signature to the right side which I don't like it because my signature is in English (My Hebrew is a why better from my English ; )
How can I keep the signature on the left side as default?
Hope to get your support in this issue.
Thanks in advance,
Joni.

Joni11 wrote:
How could i do this?
Sorry, I don't know. But have you already tried selecting your sig and using the usual alignment tools? It seems to work for me when used in the new message pane.

How can I create color fields of the main color automatically?

Hi
I have many images files. For each picture, I need a color field of the main color, so the one that is most commonly seen.
This color should be saved as a new image as background.
How can I do it in Photoshop, so this is done automatically.
Thank you.

Sounds specialist to me. Have a look at Channel Calculations in Photoshop help, but as Christoph says, you are going to need scripting to automate the process. It's not an easy thing to Google either, but I found this PDF Search for 'analyzing color'
http://help.adobe.com/en_US/photoshop/cs/using/WS7901119A-3EE7-4806-B5AF-1A6D58827A81a.htm l
If you are pre Creative Cloud, you'll need the Extended version.
Good luck

My 5 year old iMac's hard drive is at the point of failing. I'm trying to save al files on it, but it wont allow backup via Time Machine to an external hard drive. How can I keep from losing all the files and programs if the hard drive fails?

I'm concerned that my iMac, purchased 5 years ago, is about the crash and I can't back up my files and programs to an external hard drive via Time Machine because the computer freezes after only a couple hundred MB and gets nowhere near the required amount.
How can I save these files and programs if the computer hard drive fails or has to be replaced without the backup being able to be done? I need to do something quickly, but I'm not sure what I can or should be doing.

Get an external hard drive, some good ones that I like are the OWC, http://www.macsales.com Mercury Elite Pro drives...they are very good and reasonably priced.
Get the drive, connect via USB or FireWire, then use Disk Utility to format the new drive as Mac OS X Extended (Journaled), and then use Disk Utility to Restore the current drive to the new drive. Restore actually clones the drive so you will have a bootable backup on the external drive.
After you have formatted and named the external drive, click Restore in the main Disk Utility window, drag the name of the old hard drive to the Source box, and drag the name of the new external drive to the Destination box. DU will make an exact clone of the internal drive on the external drive.
That clone will be a complete backup of the operating system and all of your data.
You can test it by restarting the iMac and hold the Option key. That will give you a grey screen showing all bootable drives. Just click the external drive, then click the upward pointing arrow under it and the iMac will boot from that drive.

How can i keep multiple tabs in the tab strip without them compressing into one tab?

when i open more than 6 windows , they all compress into one tab from where i have to access pages with a drop down menu. i want all the tabs to open up and the individual tabs to appear separately on the tab strip which can be scrolled up or down. thank you

hi
the problem is in the firefox tab strip at the bottom of the page. i have attached two screenshots . when i open more than 6 tabs, they all get compressed into 1 tab. i want all tabs to stay open individually, and the tab strip should therefore have a page scroller icon forming when many tabs open. i have had this in the earlier computer i had, but recently got a new one. now i cant figure how to set firefox to do what i need.
thanks

How can I keep my cursor on the screen ?

my cursor on my imac goes off the screen. How can I control it?

Thanks for your reply, but I am talking about tasks not events. I can see my events, I cannot see any tasks below that. I used to be able to, but they have disappeared. I can plan a new task, but it never shows anywhere on my screen after i have planned it.
Cheers,
Russ Kent

How can i add one field in the container for the standard task-90310004?

Hi,
Please let me know thw steps to add one field in the container for the standard task-90310004.
Usefull suggestions will be rewarded.
Regards,
Neslin.

Hi,
Containers are used for holding Application data for Workflow purposes.
Event container
Task container
Workflow container
Role container
Binding is the linking of data from one container to the other for making data available all across the workflow.
But you can get values from one container to another container like this
Container(Con)
1. WF Con to Role, Wf con to task con, Wf con to event
and
2. Event con to wf con, task con to wof con
and
3. Method con to task con
and
4. Task con to method con
So, we don't have direct possible binding from task con to task con.
Thanks and Regards,
Prabhakar Dharmala
Message was edited by:
Prabhakar Dharmala
But you can do pass values from first task con to wf con and again from wf con to another task con

How can I Validate all fields of the form and show validation summary?

Hello,
I am building a dynamic form with livecycle. I need to implement two fetures:
1. Show the user all invalid fields of the form when he tries to submit it (show him validation summary) and guide him to correct the errors.
2. Remove the highlight frame from mandatory fields after user enters his input.
Thanks a lot in advance,
Peter.

Okey once more a try...
Normally you don't get a list of the fields that didn't pass the validation. So, you have to script the list by yourself!
If you put the validation script in the exit field that means if the user doesn't enter the field, the script won't be executed.
You could make an additional script into presave, presubmit, validate or whatever that will force the user to go to the field.
For example make a field only mandatory if the user doesn't enter anything.
Way to make mandatory fields that won't be shown if the user had provided response
if (this.rawValue == null) {
this.validate.nullTest = "error";
this.edge.color.value = "255,0,0";
this.assist.toolTip.value = "This field is mandatory, please provide a response...";
xfa.layout.relayout();
else {
this.validate.nullTest = "disabled";
this.border.edge.color.value = "255,255,255";
this.assist.toolTip.value = "This field is optional...";
xfa.layout.relayout();
Will JUST get mandatory if the user doesn't provide response. (Is an older script I got here and changed slightly for you.)
Do the parts in the event that should "fire" them. Probably divide it into two parts with two if statements instead of the else...
Think good about the event!
Way to make a list of what things the user has forgotten!
You can make an invisible TextField that will be shown AND populated if the user tries to submit something invalid.
Calculate Event of the Textfield:
this.rawValue = " "
if (Dezimalfeld1.rawValue == null)
{this.rawValue = this.rawValue + "*Please enter something into Dezimalfield1, Page1,... ";}
if (Dezimalfeld2.rawValue == null)
{this.rawValue = this.rawValue + "*Please enter something into Dezimalfield1, Page1,... ";}
(Of course you've got to name the fields exactly.
All scripts are JAVASCRIPT!)

How can I have multiple fields on the left and one large field on the right?

I'm trying to conserve space on a form. I have five "pass/fail" fields on the left and would like a large free text field to the right. This will be an area to comment on the "pass/fail" section. When I add the multi-line text box, it moves all my "pass/fail" mulitple selection boxes.
Any advice?

Sorry FormsCentral doesn't allow a fields to spam over multiple rows.
Gen

How can I keep Firefox from changing the language for the spelling checker?

I'm using Firefox 20.0 on Fedora 17 (Xfce) fully updated. At random intervals Firefox will either set the language to some random version of English (Zambia, much of the time) until I notice and set it back or it will simply uncheck US English without selecting anything else. It also turns the spelling checker off once in a while. It's hard to say just what, if anything, triggers this because I only close Firefox for updates, and only reboot for kernel updates. Most of the time, my computer runs 24/7 and Firefox stays open sometimes, for over a month without any other issues. I found two old, closed threads on this, but neither of them had anything applicable.

There's an issue with this because Firefox looks at the page you're visiting and decides on the dictionary based on the language code. At least according to this [https://bugzilla.mozilla.org/show_bug.cgi?id=682564 bug].
I'm still looking to see if there's anything that can be done to stand on the programs neck until it cries uncle and uses EN-GB regardless. But I'm not holding my breath.

How can I keep Bing from replacing my home page?

AfterI select my home page it reverts to a Bing Search tool bar when I return. What can I do to keep it as a home page?
Fran Ciurczak

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
You can open the about:config page via the location bar and do a search for jzip via the Filter at the top of the about:config page. 
You can reset all jzip related prefs that appear bold (user set) via the right-click context menu to their default values.
See also:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.com/kb/Preferences+are+not+saved

How can I make a table continue in same page

I have a three column table, I want it to continue on the same page instead of continuing into a next page, is there a way to do this?

Hi Javier,
A solution by Badunit
Table 1
a
b
c
d
e
f
g
h
Table 2. Formula in B2 (and fill Down and Right)
=IFERROR(IF(OFFSET(Table 1::$B$1,ROW()−1+(COLUMN()−2)×(ROWS(B)−1),0)="","",OFFSET(Table 1::$B$1,ROW()−1+(COLUMN()−2)×(ROWS(B)−1),0)),"")
a
d
g
b
e
h
c
f
Table 2 can be any shape.
Regards,
Ian.

How can I keep the field in the same page

Similar Messages

Maybe you are looking for