How can I Know the real time of my 24p project?

I made an animatc as part of planning a 7 min animated video on Premiere Pro using a 24p project, trunsting that my ruler is set to 24 fps and that the time displayed was the real time of the video (not the NDF time), since there was no indication on Premiere's create sequence window that the ruler was on NDF basis. (When you cerate a new sequence,on the new sequence settings window you set the timebase as 23,976, but the ruler is shown as 24FPS, no indication of drop or non drop frame.)
Recently I Had to export a 29,97 version of my project, and it was in fact 14 frames bigger. So I concluded that my time ruler was also showing me a NDF time not the real time of the video.
Is there a way of creating a 24p project, with a ruler that gives me the real "clock" time? Or any Formula to "convert" a NDF time to DF (real) time, so I know where, on an NDF ruler, do I have  to stop to have a 7 min video?
Thanks in advance
Mauricio

I think the best you can do is use the System Information application (Utilities Folder), looking in the wireless section.
charlie

Similar Messages

  • How can i know the logging time per data acquisition?

    Hi There,
    I'm using SignalExpress version 2.5.1 Tektronix Edition.
    I'm connecting my PC with a Tektronix Oscilloscope through Ethernet cross-cable.
    I use SignalExpress to log the data, the question is how can i know what will the time be for each data that acquire and saved in the log?
    As inside the log, under the time row, it just only show number in sequence but not time.
    Hope that some one can help me on the matter.
    Thanks in advance.
    Good Day!

    hi Priyanka,
    you can try
    1. check in metadata repository to get the data target name. rsa1->metadata repository->query
    2. if query exist in system, go to BEx Analyzer, type in query technical name or description, and 'change'/display the query in query designer, data target name is on right side (cube/ods).
    or 3. go to table RSRREPDIR, COMPID = query technical name, and INFOCUBE is the data target name. (if you only know query description, go to table RSZELTTXT, get ELTUID and put the value to COMPUID in RSRREPDIR to get INFOCUBE the data target name)
    after got the data target, go to rsa1->infoprovider, locate the data target, and right click 'show dataflow', you will get the datasource name.
    hope this helps.

  • Parental Control, how can I know the remaining time (from command line)

    Hello,
    I did setup Parental Control on my kid's iMac.
    I configured a "Weekday Time Limit". On their desktop, they can get the information about the remaining time by clicking simply on the clock.
    I would like to know how I can get this information while I am connected via ssh
    Thank you in advance.

    Apparently all the Parental Controls preferences files are stored here:
    /Library » Application Support » Apple » ParentalControls » Users » username
    I imagine somewhere in there it keeps a record of the remaining time etc.  You'll need root authority to access Users onwards.

  • How can I see the elapsed time in an imovie project

    I am submitting a video for my national board teaching portfolio, and I need to reference certain things in the video at a certain time. How do I identify the time of a particular frame?

    I agree with Bengt W. There are many reasons, even in a simple movie, to want to know the timing of things. This is a surprisingly frustrating product. For want of timing information, you are requiring your users to pay $300?
    In my situation, I took some video of a show (with the performers permission) with an iPad and an iPod.  All I want to do is make a movie with one video as the main position with a series of cutaway clips from the other. It is incredibly frustrating to do this without knowing where you are within each clip.
    When helpful and capable forum participants like we have here have to spend time explaining how best to make do with a product, it's a clear indication of a fault with the product. Now, I either have to spend extra time in iMovie making due with this crippled interface, or I have to spend time looking for an alternative product.
    Consider this a feature request!

  • How can i know the price for iphone s5 in Middle East in Oman

    hi..
    please help me
    i want to buy an iphone 5s. how can i buy it from apple store?
    how can i know the real price for my country, aware that i am in Middle East exactly in Oman?
    and how many time it will take to reach in my country Oman?
    please help as soon as you can..
    thank you

    As I said, if you want to buy it from the USA online Apple store, you will need to have a credit card issued by an American Bank or financial company, you will have to have a USA billing address associated with that card, and you will have to have it shipped to a USA street address.
    Aramax is a shipping company - you do not have a credit card from them and they cannot pay for your purchase.  Having an account with a shipping company doesn't provide you with a USA source of payment for your purchase.
    As I understand it, the Oman government does not allow the iPhone to be sold in Oman, there are no official service providers for it, and thus there is no legitimate source to buy an iPhone from within Oman.
    Online Apple stores do not allow payment by foreign means or in foreign currency, they do not do currency exchange, nor do they ship internationally.

  • How can u know the process chain total time, individual time?

    Hi guru's
    How can u know the process chain total time, individual time?
    and what options will available in sm37?
    Thanks
    prabha reddy

    Hi Prabha
    Iam not very sure about total time and individual times.
    But you can go to tcode rspcm for monitoring the daily process chains. it gives you details like 1. status  2.start date & time  3. Log ID  of each process chain.
    or you can go to log view of particular individual chain to know how long it has run.
    SM37: tcode for simple job selection.
    here you check the status of job.
    you can select for certain conditions like
    1. scheduled
    2. released
    3. ready
    4.active
    5. cancelled
    Assign points if it was helpful
    Revert back if you need further info/
    regards
    AP

  • How can I implement a real time datawarehouse

    Hi, I'm a little lost here but I want to know how can I implement a real time datawarehouse in sql server, I don't know if it is only to make the extraction process the shortest time possible.
    Thank you

    Hi Mega15, 
    I agree with everything Seif and Louw said, but I'd like to add that if you are using SQL Server 2012 or 2014 and you want to use DirectQuery or ROLAP mode (depending on what SSAS mode are you using, tabular or multidimensional) you may be interested on
    using columnar indexes on your base tables. 
    Analytical and aggregated queries will take GREAT advantage from these indexes, they will perform much better than with traditional B-Tree indexes in most of your scenarios. 
    Regards. 
    Pau.

  • How can I know the size of DB Table

    Hi, Guys,
    1. How can I know the size of the DB Table in terms of kb
    2. If I delete some records from the Table, does the actual size of the Table remains  same or will it be reduced.
    3. If size remains same after deletion, how to reduce the size ( i.e. occupied space).
    thanks
    Mahesh

    Hi
    1. How can I know the size of the DB Table in terms of kb
    There is no precise method/tcode/program to know the Table size of a tables.
    Just based on the record size of a table(say for example 2kb), and if 200 records are there then, we roughly assume that it occupied 400 kb.
    All the tables are stored in Table spaces.
    2. If I delete some records from the Table, does the actual size of the Table remains same or will it be reduced.
    Time being it remains same. it won't get reduced immediately
    during some next DB reorganisation it gets reorganised by reducing it.
    3. If size remains same after deletion, how to reduce the size ( i.e. occupied space).
    during next DB reorganisation it gets reorganised by reducing it.
    Reward points if useful
    Regards
    Anji

  • HT4759 How can I know the Devices using my i Cloud or Apple ID?

    How can I know the Devices using my i Cloud or Apple ID?

    This information is not available. If you have any misgivings, change your password at http://appleid.apple.com - it should be at least 8 characters - 12 would be better - of which one must be a capital letter and one a numeral. No punctuations signs, and no real words.

  • How can i know the phone is in a call or not?

    How can i know the phone is in a call or not?
    I need to detect it and then send alert to the phone.
    Should i use AXL or JTAPI?

    If you are pushing text or audio to an IP phone, using CiscoIPPhoneExecute, you can use "Priority" as "2", then it will not execute that command.
    0 = Execute Immediately
    The URL executes regardless of the state of the phone. If the Priority attribute does not get specified in the , the default priority gets set to zero for backward compatibility.
    1 = Execute When Idle
    The URL gets delayed until the phone goes idle, at which time it executes.
    2 = Execute If Idle
    The URL executes on an idle phone; otherwise, it does not get executed (it does not get delayed).

  • How can I make the hour times in the left margin in iCalendar dark enough to read

    How can I make the hour times in the left margin in iCalendar dark enough to read? (Eye transplant too expensive; couldn't schedule anyway under the circumstances

    I can't read anything on the new ical. I'm a teacher of the visually impaired and know how to access voiceover and zoom but hey, i just want to be able to open the app and visually scan a month quickly and visually.
    Never had a problem with the original ical - how to get it back?

  • How can I know the name(s) of font from built-in font dialog from Word VSTO AddIns.

    Hi, All !!
    I would like to extract some values from the built-in font dialogbox "wdDialogFormatFont" through VSTO AddIns.
    Figured out short codes;
    Microsoft.Office.Interop.Word.Dialog 
    F_DLG  =  Globals.ThisAddIn.Application.Dialogs[Microsoft.Office.Interop.Word.WdWordDialog.wdDialogFormatFont];    
    F_DLG.Show();
    MessageBox.Show( F_DLG.FontMajor.ToString() );
    MessageBox.Show( F_DLG.FontHighAnsi.ToString() );
    Ther last two lines (red ones) do not work at all.
    How can I know the name of the fonts ? (English and Non-English)
    In VBA, it works beautifully.
    Thanks !!

    Hi,
    According to the description, you want to get some options from the build-in dialog dispaly by code.
    As far as I know, we can declare an dynamic object to achieve the goal. Here is the code for your reference:
    dynamic F_DLG = Globals.ThisAddIn.Application.Dialogs[Microsoft.Office.Interop.Word.WdWordDialog.wdDialogFormatFont];
    F_DLG.Show();
    MessageBox.Show(F_DLG.FontMajor);
    Also we can use refrection to get the property we wanted like below:
    Microsoft.Office.Interop.Word.Dialog F_DLG = Globals.ThisAddIn.Application.Dialogs[Microsoft.Office.Interop.Word.WdWordDialog.wdDialogFormatFont];
    F_DLG.Show();
    MessageBox.Show(F_DLG.GetType().InvokeMember("FontMajor", BindingFlags.GetProperty, null, F_DLG, null).ToString());
    Regards & Fei
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How can I get the elapse time for execution of a Query for a session

    Hi ,
    How can I get the elapse time for execution of a Query for a session?
    Example - I have a report based on the procedure ,when the user execute that it takes say 3 min. to return rows.
    Is there any possible way to capture this session info. for this particular execution of query along with it's execution elapse time?
    Thanks in advance.

    Hi
    You can use the dbms_utility.get_time tool (gives binary_integer type value).
    1/ Initialize you time and date of beginning :
    v_beginTime := dbms_utility.get_time ;
    2/ Run you procedure...
    3/ Get end-time with :
    v_endTime := dbms_utility.get_time ;
    4/ Thus, calculate elapsed time by difference :
    v_elapsTime := v_endTime - v_beginTime ;
    This will give you time elapsed in of 100th of seconds...
    Then you can format you result to give correct print time.
    Hope it will help you.
    AL

  • How can i know the RPM of my HD?

    I guys...
    Simple question...
    How can i know the RPM of my HD?
    I have a Mac mini and i would like to know that.
    Any ideas?.
    Thanks so much!!!

    Hi!!
    It doesn't show...
    Vendor:          NVidia
      Product:          MCP79 AHCI
      Link Speed:          3 Gigabit
      Negotiated Link Speed:          1.5 Gigabit
      Description:          AHCI Version 1.20 Supported
    FUJITSU MHZ2120BH G1:
      Capacity:          120.03 GB (120,034,123,776 bytes)
      Model:          FUJITSU MHZ2120BH G1                   
      Revision:          00810009
      Serial Number:                  K64PT9427599
      Native Command Queuing:          Yes
      Queue Depth:          32
      Removable Media:          No
      Detachable Drive:          No
      BSD Name:          disk0
      Medium Type:          Rotational
      Bay Name:          Lower
      Partition Map Type:          GPT (GUID Partition Table)
      S.M.A.R.T. status:          Verified
      Volumes:
      Capacity:          209.7 MB (209,715,200 bytes)
      Writable:          Yes
      BSD Name:          disk0s1
    Macintosh HD:
      Capacity:          119.69 GB (119,690,149,888 bytes)
      Available:          21.38 GB (21,376,569,344 bytes)
      Writable:          Yes
      File System:          Journaled HFS+
      BSD Name:          disk0s2
      Mount Point:          /
    FUJITSU MHZ2120BH G1:
      Capacity:          120.03 GB (120,034,123,776 bytes)
      Model:          FUJITSU MHZ2120BH G1                   
      Revision:          00810009
      Serial Number:                  K64PT9427599
      Native Command Queuing:          Yes
      Queue Depth:          32
      Removable Media:          No
      Detachable Drive:          No
      BSD Name:          disk0
      Medium Type:          Rotational
      Bay Name:          Lower
      Partition Map Type:          GPT (GUID Partition Table)
      S.M.A.R.T. status:          Verified
      Volumes:
      Capacity:          209.7 MB (209,715,200 bytes)
      Writable:          Yes
      BSD Name:          disk0s1
    Macintosh HD:
      Capacity:          119.69 GB (119,690,149,888 bytes)
      Available:          21.38 GB (21,376,569,344 bytes)
      Writable:          Yes
      File System:          Journaled HFS+
      BSD Name:          disk0s2
      Mount Point:          /
    Those are the 2 texts...
    Any idea?
    Thanks!!

  • How can i Know the email linked to icloud

    Please can anyone help me how to know teh email linked to my phone ??
    it shows me h********@hotmail.com i tried to logged in with my account that belong to h********@hotmail.com and it says inocrrect password or email i tried to reset my id but no reset mail was sent to my email ..
    so i tried to creat a new with the existing email addreess and it works and verified and finally i tried to activate it with h********@hotmail.com with the new passs and it says account cannot be activate with h********@hotmail.com it is linked to another account ..
    so please how can i know the linked email to my phone
    Thank you

    Welcome to the Apple community jorjh.
    If you mean that Find My Phone is asking for a password to a different Apple ID to your current Apple ID.
    This feature has been introduced to make stolen phones useless to those that have stolen them.
    However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7, or if you restore from a previous back up made before you changed your details.
    The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID using your current password, you don’t need access to this address if it’s previously been used with your Apple ID, once you have saved these details enter the password as requested on your device and then turn off "find my phone" and delete the account from your device.
    You should then change your Apple ID back to its current state, save it once again and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
    This article provides more information about Activation Lock.

Maybe you are looking for