How can I know what page I'm on in a document?

One of the worst features in AppleWorks was that it would only display the total number of pages but not the page you were looking at/working on. It's very disturbing to me that this archaic feature was brought back for the new Pages. I want to be able to see, i.e., Page 28 of 30, or if I'm scrolled between pages, Pages 28-29 of 30, or if I've highlighted content across multiple pages, 3 of 30 Pages.
Is there a way to do this WITHOUT creating a footer in every single document I create?

On Yosemite 10.10.1, Pages ’09 v4.3 can be used in full-screen mode, and it does feature a format bar by moving your pointer to the top of the screen. Here you can set the background color, etc. as with prior OS X releases.
The ability to toggle full-screen mode is in the keyboard sequence: control+command+F. The diagonal, double-arrow button decoration, used in prior OS X releases, is removed from the upper right corner of the document title bar in Yosemite. Apple has replaced this visual design cue with an arcane implementation in the green traffic light of the document titlebar. Patently useless after one is in full-screen mode, invisible unless one moves their mouse pointer on it, and where one has to resort to the keyboard to exit full-screen.

Similar Messages

  • What is the last version update in apple tv and how can i know what is my Operating System

    What is the last version update in apple tv and how can i know what is my Operating System
    i have an apple tv 3
    thx

    6.1
    Settings > General > About > Apple TV Software

  • How can i know what transaction is handle by the TM?

    How can i know what transaction is handle by the TM?

    Hi;
    Please see below
    E-Business Oracle Trade Management Product Information Center [ID 1297829.1]
    Regard
    Helios

  • How can i know what SubVI is on SubPanel?

    How can i know what SubVI is on SubPanel?
    In the main of my application i have three subpanels that open many different SubVI, i need to know what reference of subvi is actually open
    what could be the best way to do it?
    thanks,
    Andres

    I'm not aware of a way of directly getting the VI reference from the subpanel control after a VI has been inserted into it. Seems like an oversight to me if it's not there. This means you will either have to create a mechanism for saving the reference that's currently open at the time that you invoke the "Insert VI" method, or you can use a roundabout means like getting the run state of a VI or reading an indicator's value, as mentioned in this thread.

  • How can i know what redemtion code i have ?

    how can i know what redemtion code i have ?

    You read the email from the vendor who sent you the code if you purchased online, or you look at the box you bought with a redemption card inside if you bought in a store
    Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  • How can i know what ipad i have

    How can i know what i pad i have?

    Identify iPad Models...
    http://support.apple.com/kb/HT5452

  • How can I change the page size of a scanned PDF document?

    How can I change the page size of a scanned PDF document?
    I scanned a 50-page document with an HP 5610xi All-In-One using the software that comes with it: HP Scan Pro. Though the physical document has standard 8.5" x 11" pages, the PDF resulting from scanning has page size set to 35.42 × 48.67 inches (according to Preview's "Tools > Inspector". I want to resize the pages to 8.5" x 11". Shouldn't Preview be able to do that with "Tools > Adjust Size..."? When I try, the menu option is grey so I can't select it.
    I'm using Preview Version 4.2.

    Thanks for the insight; that explains why it's the wrong size. I selected 300dpi scanning (which is the default, actually), but HP Scan Pro evidently created a PDF with 72dpi indicated. I want it fixed because I want to distribute the file to other people and have them able to print or display it without problems.
    I still don't know why Preview won't let me change it, but your question about whether I wanted to print it did lead me to find a workaround: "File > Print" and "Save as PDF..." saved it with the correct page size.

  • How can I know what version of my Crystal Reports XI (Release 1 or 2)?

    I find the product version no. in the HELP-> About Crystal Reports is 11.0.0.2495.
    I don't know it is release 1 or release 2, I want to download the service patch,
    which version of service patch should I need to download ?
    Derek Yim

    Hi Derek,
    This is duplicate thread.
    You question is answered here:
    [How can I know that what version of my Crystal Reports XI ?;
    Regards,
    Shweta

  • How can I know what objects are under specific tablesapce?

    Dear all,
    I want to find out how many tables are under "SYSAPPL" tablespace. How can I know that?
    Please advice,
    Amy

    Assuming you have appropriate privileges,
    SELECT COUNT(*)
      FROM dba_tables
    WHERE tablespace_name = 'SYSAPPL'If you don't have access to DBA_TABLES, you may be able to use USER_TABLES or ALL_TABLES, but that may miss objects that are in that tablespace that you don't have access to.
    Justin

  • Objects deleted under transport request by me-how can I know what were dele

    I am using my collegue's user id and password.
    I was creating data element and adding it to segment in we31 and then I did program change in se38.
    Unfortunatley, I was created all the above under my colleague's existing transport request which contains so many objects.  After I realised, I deleted some to create all under a fresh request ( it seems some which are not related to my development were also deleted . so how can i find what ever were I deleted ? ) ...not sure what was I deleted...may be one program, one transaction code etc.
    Kindly help me how to find out what were I deleted under that request  ?
    YOUR HELP WILL BE HIGHLY APPRECIATED.

    There is no easy way to find it out. Something you can do that you can find out the object list from TADIR table which is created by your friend and then go to E070 table and E071 table and check among those objects which are not attached with any transport request.
    So thus you will get a smaller list of objects and your friends objects ( deleted by you) will be definitely in that smaller list. Now you can check with your friends so ensure which are the objects deleted by you.

  • NForce2 chipset in (K7N2 Delta), how can i know what type it is?

    Ive managed to get my Athlon Xp 3000+(400FSB) CPU stable by updating my motherboards Bios. It then handles the 200FSB, until i play a game, or really heavily load the CPU. Ive tested running the memory at 400Mhz whilst running the 3000+ on a 333Mhz, and it works fine all the time no problems.
    Ive then seen there are 2 (or even 3) versions of the chipset:
    A previous NForce 2 Chipset that when it gets to the 200FSB it will just not handle it, because it buggy.
    And a NForce2 Ultra 400 Chipset that can make the 200FSB without problems. My question is...how can i know which version i have?

    Quote
    Originally posted by Latinmike
    :idea:AS FAR AS I KNOW IF YOU HAVE A K7N2 DELTA series (6570) ULTA 400FBS YOU HAVE AN nFORCES 2 CHIP. YOU CAN CHECK MOBO SERIAL NUMBER AND CHECK THE MSI SITE. THAT IS THE FOR SURE WAY TO TELL,
    IF YOUR RUNNING YOUR PC AND YOUR CPU IS 166 FBS (333) AND YOUR MEMORY IS RUNNING 200 (400 FBS) YOU NEED TO SET YOUR CLOCK/RATIO TO 5:6. GOOD NOTE IF U WANT TO OC YOUR SYSTEM W/OUT CHANGING YOUR VCORE VOTAGE THAT WILL PRODUCE MORE HEAT, AND MORE LIKLYTO RUN STABLE GIVE THIS A SHOT SET YOUR SYSTEM PERFROMANCE TO MANUAL SET YOUR FBS TO 187 MUILT. TO 13X= 2431GHz, 170 X 13 WIL GIVE U 2210GHz SET YOUR CLOCK/RATIO TO 1:1 TRY 2OR 2.5-3-3-7 GIVE IT A SHOT  :lol_anim:AS SOON AS I CAN GET MY NEW MEMORY I WILL TRY. AS FAR AS I KNOW THIS IS THE BETTER WAT TO OC THAT CPU W/O THAT MUCH MORE HEAT. IF YOU DO TRY IT PLEASE LET ME KNOW THE OUT COME.  

  • How can we know what r the reports done on a particular cube or ods

    Hi Fnds ,
         I just want to know what r the reports done on my CUBE or ODS.
             is there ant specfic table or t-code for that.

    Hi Ravi,
    Double-click on your DSO/ Cube, go to the 'where-used list' option on the top right-hand side. When you drop-down, you can see all the objects where the DSO/Cube is used. If it is being used in a query, the same would be displayed
    Rgds,
    Sonal

  • How can I know what my skype number is?

    I have a regular subscription. Do I also have a skype number with this free subscription? If yes, how can I find out what my number is so that people can call me from landlines?

    I ALSO need my number for friends to use

  • How Can I know what is causing a lot of Redo entries ?

    Hi
    My production database began yesterday to generate a lot of archives and I want to know what transactions are causing a lot of Redo entries ?
    I guess it can be a process repeating something a lot times ( insert, deletes, updates, etc... )
    Thanks for helping me

    user2931261 wrote:
    Hi
    My production database began yesterday to generate a lot of archives and I want to know what transactions are causing a lot of Redo entries ?
    I guess it can be a process repeating something a lot times ( insert, deletes, updates, etc... )
    Thanks for helping meDBMS_LOGMNR will reveal DML that produces the REDO

  • How can I know what kind of field is?

    Hi,
    I have a function that receive a field, and depends of the kind of field (Text, numeric or date) is necesary execute a expecific script.
    Is it possible ask to the field if it is a numeric, text or date field?
    Thanks

    I have no straight answer for this situation... However you may achieve this using workaround methods using following two properties...
    $.name or this.name gives you the name of the fields you gave at design time. So name those three fields they way you can easily identify their type with their name. And build you logic based on that.
    You may also use $.className or this.className to get what kind of the field it is but not to the granularity to the level of your expectation.
    I prefer the first one. Try that and let us know what you found.
    Good luck,
    SekharN

Maybe you are looking for

  • I would like to use iPhoto to see existing Picture folder without importing

    The following is a question for Aperture, as well. I have a huge Picture file (90G), and I do not want iPhoto to import that Picture folder thereby making a duplicate. I only want one Picture file, the existing system folder called Pictures. And I wa

  • Windows 8 Bootcamp Does Not Recognize External Monitor

    So, my Bootcamp of Windows 8 does not recognize my external monitor when I try to plug it in. I have read that the startup must recognize the monitor during the boot process. However, I have already done this and my external monitor remains in sleep

  • Without Warning, OSX 10.6.8 emailer has epic fail

    Even my MacGuru of some 17years could not figure what the *wild weasel* malfunction was coming from. He's the one who steered me to use the designated iCloud account page. Suddenly, for no apparent reason, my 10.6.8 emailer *epically failed* to recei

  • AS2 using HTTPS - Handshake failure # null

    Hello, I have scenario IDoc - PI - AS2 using HTTPS. when i am trying to send data it is giving me "Handshake Failure" error. I have check certificate and configuration properly. Parnter is saying "your client doesnu2019t sent the requested client cer

  • How Transport Screen 0111 of User Exit MM06E005 from Development to Quality

    Hi Gurus, Greetings!!! I have implement a Screen Exit MM06E005 for my PO Requirement (ME21N, ME22N, ME23N). I am able to see the added screen details in my Development Client However, after transporting the request to Quality, I am unable to see the