How can I know which clients are connected to my network through express and which are connected through extreme?

I have an airport express extending, through wireless, a network provided by an airport extreme. How can I know which clients are connected to my network through express and which are connected through extreme?
Here you can see both routers:
I would expect to some clients connected to the express, other than the extreme. And that's all I see: only the airport extreme appears as client of the airport express.
Below, one can see the summary of the config for both routers.
Would somebody explain it?
Thanks,
Marcelo
Message was edited by: Marcelão

please disregard this answer.
Message was edited by: Marcelão

Similar Messages

  • How can i know the exact model of my wireless network card? macbook pro 13"

    how can i know the exact model of my wireless network card? macbook pro 13"

    I think the best you can do is use the System Information application (Utilities Folder), looking in the wireless section.
    charlie

  • I used part of my name in my home network.  Now I understand this was stupid security error.  How can i change the name of my home wifi network, airport express?  Thanks.

    I used part of my name in my home network.  Now I understand this was stupid security error.  How can i change the name of my home wifi network, airport express?  Thanks.

    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the picture of the AirPort Express
    Click Edit in the smaller window that appears
    Click the Wireless tab at the top of the next window
    Edit the Wireless Network Name
    Keep it short.....maximum 10-12 characters or so. No blank spaces or punctuation marks in the name
    Click Update at the lower right of the window to save the new setting and wait a full minute for the AirPort to restart

  • How can I use the Messaging App & Game Center when both my wife and I are using same apple ID on our ipads?

    When I try to set up my wife's messages app, it tells me the apple ID is already in use and won't let me go through with it.  Also, after the IOS5 update, my wife's game center login went away and syncs to mine and we cant figure out how to get it back to hers.

    You will need to create a new Apple ID for your wife.  This may require a new email address too.  As for Game Center, there is a sign out dialogue on the main page if you tapon your ID.

  • How can I add a client wireless usig Airport Utility 6.0?

    In menu airport of firmware 6.0 there is not window "Add a wireless client". I'm using Mac Os lion with Airport Utility6.0, how can I add a client wireless with this firmware)?

    If you have a dual band AirPort Extreme, you can add another to "extend" both bands of your network to provide more  wireless coverage.
    The "best" way to do this is to connect the "remote" access point back to your main AirPort Extreme using an Ethernet connection. This preserves bandwidth on the network better than any other method...and...you can locate the "remote" Extreme exactly in the area where more coverage is needed. Instructions for thhis are here:
    http://support.apple.com/kb/HT4260
    You might be able to connect using wireless only, but this is always "Iffy".
    In general, the Extreme would need to be located approximately half the distance from your main router to the general area that needs more coverage. But, walls, ceilings and other obstructions usually come into play, requiring some experimentation. Instructions are here:
    http://support.apple.com/kb/HT4259
    If you elect to try wireless, you really won't know if things will work until you try. Recommend that you have a "Plan B" if wireless does not work for your purpose.

  • How can I know in which Tables are the fields stored

    Hi,
    In transaction FSE3 Display Financial Version
    Statement Version, if I drilldown in details, I can
    see Item No, Chart of Acc, From Accountm To Account D,
    C.
    when I do a F1 on the fields, I can see that it is a
    structure. How can I know in which Tables are the
    fields store?

    Hi Ankit,
    There are no rules or guidelines for finding the table but i will share some of the tips used generally.........but i am not sure if we can do it for a tree structure..but try anyways....
    Double click on the structure name seen on the F1 pop up window...
    in the structure screen, try to analyse the field which is very important something like a key in that set of fields or do the same for the fields which we feel are more important,then click on the domain for that field....once in the domain..click on the "where used list for the domain" on the top...
    it will display a pop up -> select only "table" and then press "Tick/OK"..A list will be displayed with the data element and table name ..from this we need to find out the right one we need either by going for text of the table or going through each and every one
    It takes time but does the job.....
    Regards
    Byju

  • How can i know the no .of  connections are used in the connection pool

    Hi
    I am using tomcat connection pool in my project .but how can i know how many connections are used by my project .how can i know how many connections are used plez help me

    You mean INSIDE the webapp, using the Admin Console (tomcat docs should be helpful in that case)... Where are you supposed to search for the info?

  • How can I know which photos are in the library was used in each album I have created before.

    How can I know which photos are in the library was used in each album I have created before?
    I have many photos in the library folder of iPhoto, but actually I don't know which photos were used in my album.
    Is there any method to find this?
    Thanks.

    Album or Book?
    If Album you can find the ones not already used:
    File -> New Smart Album
    Album -> is not -> Any
    Regards
    TD

  • How can I know "No of open connections"

    Dear experts,
    How can I know "No of open connection". i.e. No of open connection.
    Thanks

    I'm assuming you probably just want the number of user sessions that are currently open, which would be
    SELECT COUNT(*)
      FROM v$session
    WHERE type = 'USER'Justin

  • How can I know which model of K9A2VM I have?

    I have a K9A2VM motherboard with an Athlon 64 x2 3600+ AM2 CPU. I would now like to upgrade to an AM3 Phenom II CPU with lots and lots of cores.
    However, I have a problem. I don't know if I have K9A2VM-FD or K9A2VM-FIH and I don't know how to find out. I've opened my box and looked at the card, but it only says K9A2VM. By reading the specs and looking at pictures, I know it has to be one of them, or at least that it is not K9A2VM-F V2 since it only has two RAM slots and I have four of them installed. There are other obvious differences too, which I can easily spot by looking at the picture.
    Now, looking at the CPU support page for -FD and -FIH, they seem to have differences in what CPUs they support:
    -FD at least supports an X6: http://www.msi.com/product/mb/K9A2VM-FD.html#/?div=CPUSupport
    Phenom II X6    Thuban    HDT90ZFBK6DGR    1090T    200    3.20    3M    6M    E0    125    7501v1B.zip
    But the -FIH CPU support page is different: http://www.msi.com/product/mb/K9A2VM-FIH.html#/?div=CPUSupport
    If I can use that processor, I'm really happy. But -FIH doesn't seem to support Phenom II at all. So provided that the information in the CPU support page is correct, it's fairly important to me to know which model I have. But in case nobody knows how I can distinguish between them; if I buy a Phenom II X6 CPU and it turns out that my motherboard doesn't support it; what is the worst thing that can happen? Will I break the CPU or motherboard, or will it simply not work, but the hardware will still be fine?
    Thanks.

    So this is a MS-7501 Version 1.0 card, in addition to being a K9A2VM. The entire web refers to it as "K9A2VM-FD / FHI". One will work, and the other will go up in smoke. And there is no easy way to know which is which. So how can I know? The reason I bought this card was so I could upgrade the CPU at a later time. Now it seems that's not possible, because the available information is so very poor. I've never had to gamble when purchasing hardware from other vendors. Is this common for MSI?

  • My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

    My iPad is disabled, but I know the passcode.. When i connect it to iTunes it says it can't access it because it has a passcode. How can i get rid of the passcode without resetting the iPad? And if there is no way to do so, how do I completely reset it?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • How can I know which link was clicked in the link list

    Hi everyone
    I'm using list of links in my page to display list of the files in some directory.
    How can I know which link user was clicked. There are some code:
    <%
    String dir = "..//files//";
    File fin = new File(dir);
    File files[]=fin.listFiles();
    for(int i=0;i<files.length;i++)
    File x = files;
    %>
    <%=x.getName()%><br>
    <%
    %>
    Please help

    You need to pass some data on the querystring to the page you are linking to.
    <a href="Main_Work.jsp?file=<%=x.getName()%>"><%=x.getName()%></a><br>
    This will send a parameter called "file" with the value of the file name that the user clicked.
    Now in Main_Work.jsp you can access this data as follows:
    <%
    String s = request.getParameter("file");
    File f = new File("..//files//"+s);
    %>

  • How can i know which version of Smartview is installed on my system ?

    Hi All,
    How can i know which version of Smartview is installed on my system ?

    Do you know what version of Essbase you are running? that could help. You can find that in EAS. Right click on the server name and select edit ptoperties, then look on the environment tab. As a final measure, find the smartview.exe on yout machine right click and select properties. in one of the tabs there might be a version number

  • How can I know about the latest updates / versions which when available for all the CC products, without having to install and check it with the Desktoip Creative Cloud Application ?

    How can I know about the latest updates / versions which when available for all the CC products, without having to install and check it with the Desktoip Creative Cloud Application ?

    Thanks for looking into this Jeff!
    I work with an Inventory module software and is responsible for software detection across several computers. Once an updated version comes up, I update our database with latest software details to get it detected if installed on any machines.
    The problem tracking updates with Desktop Creative Cloud Software are;
    1)We have to have it installed with the CC applications in-order to get the notification of the latest updates and have to check everyday.
    2)Only relates to the latest updates, so in-between we may miss a prior update unknowingly.Hence, the remote machines having those updates may not get  detected with the software version update which would create problem in reporting.
    3)For all CC products, there is no base or previous updates available for installation if we miss one.
    I went through the Adobe Products Update pages [Product updates] which holds good when it comes to Acrobat and Reader software which I follow to track down any newer updates but this is inconsistent when it comes to CC products like in After Effects CC, Dreamweaver CC etc...
    So overall to be very specific, is there any one channel I can follow to get the notifications only for the updates on CC products and then may be I can rely on Desktop Creative Cloud for installation if not available anywhere like in product update pages of Adobe ?
    Regards,
    Subrat

  • How can we know which index is triggered

    hi all ,
    how can we know which index is triggered in perticular select statement ? is that just based on the fields which used in the select statement or can we know from ST05 ?
    thanks,
    ram

    Hi Ram,
    You can go to transaction ST04(if you are authorised)...
    Now select 'Detail analysis menu' button.
    Now select SQL Request button under 'Resource consumption by' section.
    Now in the ' SQL statement pattern by ' field , give the part of the select statement you want to check.
    Now press execute.
    Now select the line item displayed and goto menu option <b>Goto->Explain SQL</b>.
    It will give you the execution plan for the particular SQL statement.
    From here you can get the index values from INDEX RANGE SCAN statement in this output.
    Hope this has been of some help to you...
    Regards,
    SP.

Maybe you are looking for