How can I Left Align text in the Marker Arrangement tabs?

It would make it easier to read the heading text of the Arrangement Marker tabs if they were Left Aligned when the project is minimised.
Is there any way of setting this up or is it a default?

I'm not aware of a way to make Firefox hide the first tab instead of the last tab; maybe there is an add-on with that feature.
There is a hidden setting to open the new tab at the end of the bar instead of next to the page you're reading. Then, of course, you won't have this problem. Instead, you'll have the problem that it's hard to figure out which tab had that link in it. In case you want to try it out, here's how.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''tabs''' and pause while the list is filtered
(3) Double-click the '''browser.tabs.insertRelatedAfterCurrent''' preference to switch it from true to false (it should turn bold)
You're done here. You can keep it open in case you hate the change and watch to switch it right back. In that case, double-click again to switch it back to true.

Similar Messages

  • How to apply left align Syle for the panelLabelAndMessage components in ADF

    HI All,
    Using jdev version 1.6.
    There is one FormGroupLayout and undrthat many panelLabelAndMessage components and each panelLabelAndMessage having different types components like textbox,dropdown etc .
    Here question is how to make llabel as eft aligh for the all components of panelLabelAndMessage .
    text-align:left is not working for the components under the panelLabelAndMessage .
    i have tried by hardcoding the lable align text align as Left ,its working .But if we apply from the CSS class its not working .
    syntax fallowed
    <af:panelGroupLayout id="pgl1">
    <af:panelFormLayout id="pfl1">
    <af:panelLabelAndMessage id="plam8" styleClass="panelLableClas">
    <af:inputText value="xyzzz" label="employee" id="it68"/>
    </af:panelLabelAndMessage>
    <af:panelLabelAndMessage id="plam9" styleClass="panelLableClas">
    <af:inputText value="adbcs" label="depetmantname" id="tg"/>
    </af:panelLabelAndMessage>
    </af:panelFormLayout>
    Styless class syntax used:
    .panelLableClas{
    text-align:left;
    Thanks

    Hi,
    this is where skinning serves you better
    af|panelLabelAndMessage::label{
    text-align:left;
    Read up on skinning: http://docs.oracle.com/cd/E23943_01/web.1111/b31973/af_skin.htm#BAJFEFCJ
    Frank

  • How can i change a text on the frontpanel?

    Hello,
    i have a cluster which looks like the attached cluster but with more and smaller quadrants.
    Now i want to add a text above each column. This can be done with a description. But now i want to load the description dynamically from somewhere (file, global) so that it must be changeable. But it seems not to be possible to change the text of a decoration.
    What other possibilities are there to add a text above the cluster? I tried to to it with a text-array but there i cant make the text be shown like in the description  (counterclockwise).
    Thx for any ideas.
    Attachments:
    text.vi ‏10 KB

    Hi OnlyOne,
    you can get acces to them using the property node, but you can´t change the value. You can use boolean controls to do it.
    Mike
    Attachments:
    text_LV80.vi ‏16 KB

  • How can I change default text in the invitation e-mail?

    Hi
    Is there anyone that knows how to change the default text in
    the e-mail invitations? I want to change the english text to
    somthing in my language.

    I have wondered that myself... I have even asked... everyone
    says it's not an option. I could be wrong... I would have to defer
    to the Adobe guys. I am on Connect everyday doing something with
    curriculum. I have found several issues that I wish Adobe would
    correct or add. I see that the new service pack has addresses one
    of them (custom reports) although, I still see bugs.
    I would love to be part of the their team that works toward
    making it better.
    Changing notifications is one thing. As far as language, that
    is a different issue.
    ~Angie

  • I spend a lot of time arranging my tab groups in the tab group view. But Panorama keeps rearranging them whenever I open up firefox. How can I get it to keep the last arrangement I left the tab groups in?

    My laptop resolution changes many times a day because I use a docking station. I suspect that this could be causing Panorama to rearrange my tab groups. None the less, I would like it to stop! Anyone know how I can get it to comply?

    Hello. I have just tried this add-on you suggested, and no change.
    And no, there was no some other add-on before, not that I know about it. Mainly, I need this option while I'm on a forum (IP board powered), it is not really something so important, but it's neat function for me.
    So, to be more detailed - I read a certain topic on this forum, and some of the posts from other members contain YouTube screens (looking same as on the original YouTube page), showing the frame of a video.
    In earlier versions of Firefox, I used to click on a small YouTube logo button (right side, down, between "watch on full screen" and "watch later" buttons). Clicking on this button automatically opened new tab, leaving forum tab as it is, and in new tab original YouTube page, with that certain video. In the same time, in Google search page, when clicking on a link, all links were opening in the same tab.
    Now, after some of the latest updates of Firefox, I noticed that some default settings were changed - in Google search, clicking on a link always opens a link in a new tab. I have found out here on your forum how to set this back in about:config feature, and now I have again that links in a Google results page are opened in the same tab (that's the way I like it).
    But YouTube screens on this forum are now also being opened in the same tab, and that is what I don't like, and trying to change back.
    So, what I need: all links to open in the same tab after clicking, as I have it now, and YouTube screens (e. g. on this forum) to be opened in a new tab (by clicking on a small YouTube logo ("watch this video on YouTube").
    Pedantic I am, I know that, and I know that this may look silly to some people, but if there is a way to do something, please tell me.
    Thanks for answering, and best regards.
    P.S.
    Is it possible that forum updates changed my setting, and not the Firefox? Thanks again...

  • How can you left click anywhere on the screen automatically using applescript

    Im trying to create a script that automatically opens up an application and then click on the buttons inside of the application (Note that the buttons that the application uses are not considered buttons by applescript's standards). What I tried so far is this:
    tell application "System Events"
      click at {724, 490}
    end tell
    The faults that I can see so far is that I didn't specify whether I wanted to do a left or right click. Please help

    Adobe CSS 4, Windows. The file is a PDF file. Please see below ... Thanks for your help !

  • Left-aligning text in Final Cut 7

    I am using Final Cut Pro Version 7.0.3, doing mostly subtitles for TV series.
    Because of the amount of titles done daily, and because we left-align around 30% of all our subtitle text, I would save a lot of time if there was a keyboard shortcut to left-align text in the subtitle clips.
    Text Settings under the Control tab in the Viewer, automatically chooses Center Alignment, which is fine, but how can I left-align text without having to choose from the Alignment options? I could not find this option in the keyboard layout, so I could not assign a key for left-alignment.
    Does anyone know how to do this?

    This is not a direct answer to your question, but in my experience most FCP-7 users don't use the Text option in text intensive projects. As you have discovered, the Text options are limited.
    Instead they use Boris Title 3D which is bundled in FCP-7:
    Boris Title 3D gives you much more control over your text, and defaults to left justification:
    You might take a look and see if using this tool (which Apple provided to address the shortcomings of the Text generator) can help you.
    MtD

  • How to align text at the top and bottom of a cell?

    I'm making a periodic table and need help with aligning text at the top and bottom of a cell. I'll have a picture in the middle of the cell with text above and below the pic. Thank you in advance for any kind of suggestions you can give me.

    It sounds as though you want to have 3 separate items inside of a single cell; text at the top of the cell, text at the bottom of the cell, and then a picture in the middle of the cell.  I am no expert, but to my knowledge that is not possible (someone please correct me if I am wrong.)  I also cannot figure out how to put a picture inside of a cell itself.
    I do have a way to accomplish the end result so long as what you need is the final look and not a useable table in numbers.
    Create 2-3 cells for each element.  (The middle cell, unless you can put pictures in a cell and I don't know, would just be there for peace of mind, but would hold the picture if you can, I would just do two if the pictures are to be in front of the cell anyway.)  The top cell align text to top on the Text tab of the inspector.  The bottom cell, align text to bottom on the same tab.  Then place the picture in the middle.  Now, you have what you want except there is one or two lines dividing the cells.  To get rid of this, either click the middle cell if you have one, or the top or bottom cell.  Click on the Cell tab of the inspector.  Select the bottom border and/or top border button and select "No Border" under border styles.  To make this fast, select a full row at a time, or use command click to select all of the same type of rows (middle, top, or bottom) and change all cells at once.
    I hope this helps.  Best of luck!
    ~Bret

  • How can I create a text pop up window in my Pages document? I want text to pop up when the reader hovers his/her cursor over a certain word.

    How can I create a text pop up window in my Pages document? I want text to pop up when the reader hovers his/her cursor over a certain word in the document. I am teacher. So for example when a student came to word he/she did not know, if he/she hovered the cursor over the word, a defintion or other information would appear.  You can do this in Word using bookmarks/hyperlinks but I can't figure this out in Pages. I can link it to another point in my Pages document but I just need the text to pop up - not take the reader to another location.  THANK YOU!!!!!!

    Have you tried Word for Mac?
    You will need to test if links survive export or printing to .pdf
    Peter

  • HT5622 We have two iphones with the same Apple ID. Since I installed iOS this morning I have started receiving all my sons texts and when I send him a text it is delivered to both of us. How can I remove my phone from the joint Apple ID and remove myself

    My son and I both have iphones with the same Apple ID. Since I installed iOS this morning I have started receiving all my sons texts and when I send him a text it is delivered to both of us. How can I remove my phone from the joint Apple ID and remove myself from finding out what he is up to during Freshers week!

    You have to use a different Apple ID for your son.
    Read this note:
    iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family
    still valid for ios 7

  • My 10 yr old wants to text from his iPod touch. We have 1 family Apple ID. How can I monitor his texts without receiving all of his friends messages? Do I need a separate Apple ID or can I link a new email address to the same Apple ID?

    My 10 yr old wants to text from his iPod touch. We have 1 family Apple ID. How can I monitor his texts without receiving all of his friends messages? Do I need a separate Apple ID or can I link a new email address to the same Apple ID?

    Just an email address
    MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime

  • The new Pages in Mavericks OS:  How can I get a ruler down the left side?  When I click on "Show Rulers,"  all I get is a ruler at the top.

    In the new Mavericks OS, when I use Pages, I cannot find a way to get a ruler on the left side of the document.  When I click on "Show rulers," all I get is a ruler at the top of the document.  How can I get a ruler on the left side?

    Wait for an Apple update to Pages which is suppose to put the vertical ruler feature back in.

  • How user can get a Sales Text for the any Line Item in the Billing?

    Salute Masters ! !
    How user can get a Sales Text for the any Line Item in the Billing?
    It's coming for other Order (Line Item for Bought out Item at Project Site - Some Item they procure at project site & complete the task).
    Where I can configure in system for all.
    Rgds
    Srivastav
    09973504950

    Hi,
    Sales text can be copied from customer to order , order to delivery and delivery to billing .
    Check the T-code : VOTXN , do the customization as per your requirement.
    check the below link :
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/dd/55f993545a11d1a7020000e829fd11/content.htm

  • How to Align Text in the TextArea

    How to Align text in the TextArea. My purpose is that I want to post the records after retrieving from database. All the records in each fields should keep aligned like Oracle WorkSheet.
    I want this way
    Code Name Place City
    a01 nilopher swiss street japan
    a02 rozina lovely street aus
    a03 benazir king's camp pitsburg
    and the out put should not look like this :-
    Code Name Place City
    a01 nilopher swiss street japan
    a02 rozina lovely street aus
    a03 benazir king's camp pitsburg
    here place and city records are getting disturbed accordingly the length of name.

    Well, first off (if it's not default, that is) you must set a monospaced font on the TextArea, unless you want to count pixelwidth of each and every string and then do an estimate on how many fill blanks you want...
    If you have the each string as a line, you use a StringTokenizer on it, extract each token, put all the tokens for that line into an array of strings.
    When every line is done, you compare the length of the nth String of each array and save the highest numbers.
    Then you reassemble each line from the arrays and pad in spaces where the tokens are too short.
    HTH,
    Fredrik

  • How can I delete a name in the address of a text message?

    How can I delete a name in the address of a texas message?  The letter W appears as an addressee in error.  The text message was not sent.  The other addressess in the message was correct.

    if there are going to be a lot of dash characters you could read the string character by character, compare the value of the character with the range of values for a letter in ascii, and not copy it to a new string if it doesn't match. If the odd character out is only going to be a dash, you can search the string for the character, split the string at this point, append it to a string buffer and keep doing this till you're done. Just suggestions :)

Maybe you are looking for