How can I localize the text of process names, task names and user actions within a process?
I'm very interested in using the capabilities of Adobe LiveCycle Process Management for my project, however I have one rather large concern... I hope someone here can tell me whether there's a way to address it.
Since I work for the Government of Canada, I have to meet certain requirements relating to bilingualism of the user interface. It's my understanding that the Workspace portion of LiveCycle has already has support for French.
But what about the design of my processes? How can I display text to a user in the language of their choice when they're interacting with my processes? ... in particular, I'm thinking about the process name, task names, and user actions.
I hope that this is possible without too much pain. I imagine this must be a pretty common requirement!
Thanks in advance to all who respond.
You can completely change the content of whole pdf by using "renderPDFForm" operation under service "FormsService". in this operation there is Template category where you can set the Locale.
And if you need to change the other workspace options like Complete, Save as Draft , you can then import workspace ui project and then change apppropriate values.
Thanks,
Prashast
Similar Messages
-
How can i make the text go vertically in numbers
How can I make the text vertical in numbers? I have merged the cells and cannot find an option for making it go vertical as opposed to horizontal.
I already gave two tools to fit this kind of needs.
tip #1 :
--{code}
--[SCRIPT write_vertically]
Enregistrer le script en tant que Script : write_vertically.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Saisir dans une cellule le mot à écrire verticalement puis le sélectionner.
ATTENTION, il ne faut pas sélectionner la cellule mais le mot qui doit apparaitre surligné.
Aller au menu Scripts , choisir Numbers puis choisir “write_vertically”
Le script colle dans la cellule le mot apès avoir inséré un return entre tous les caractères.
Pour mon usage personnel j'associe un raccourci à ce script grace à FastScripts.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: write_vertically.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
In a cell, type a word to write vertically then select it.
CAUTION, don’t select the cell but the word which must be highlighted.
Go to the Scripts Menu, choose Numbers, then choose “write_vertically”
The script insert in the cell the word after inserting a return between every characters.
For my own use, I link a shortcut to the script thank to FastScripts.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/12/17
2012/01/01 no longer use a local variable, use result
--=====
on run
Clear the clipboard *)
set the clipboard to ""
Copy the selection in the clipboard *)
my raccourci("Numbers", "c", "c")
Loop waiting that the clipboard is really filled *)
repeat
try
if (the clipboard as text) is not "" then exit repeat
on error
end try
end repeat
Extract the clipboard's content *)
the clipboard as text
Insert return between every characters *)
my recolle(every character of result, return)
Fill the clipboard with the edited string *)
set the clipboard to result
Paste in the cell *)
my raccourci("Numbers", "v", "cas")
end run
--=====
on recolle(l, d)
local oTIDs, t
set oTIDs to AppleScript's text item delimiters
set AppleScript's text item delimiters to d
set t to l as text
set AppleScript's text item delimiters to oTIDs
return t
end recolle
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
tell application "System Events"
if not (UI elements enabled) then set (UI elements enabled) to true
end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
local k
tell application a to activate
tell application "System Events" to tell application process a
set frontmost to true
try
t * 1
if d is "" then
key code t
else if d is "c" then
key code t using {command down}
else if d is "a" then
key code t using {option down}
else if d is "k" then
key code t using {control down}
else if d is "s" then
key code t using {shift down}
else if d is in {"ac", "ca"} then
key code t using {command down, option down}
else if d is in {"as", "sa"} then
key code t using {shift down, option down}
else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
else if d is in {"kc", "ck"} then
key code t using {command down, control down}
else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
end if
on error
repeat with k in t
if d is "" then
keystroke (k as text)
else if d is "c" then
keystroke (k as text) using {command down}
else if d is "a" then
keystroke k using {option down}
else if d is "k" then
keystroke (k as text) using {control down}
else if d is "s" then
keystroke k using {shift down}
else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}
else if (d contains "c") and (d contains "s") and d contains "a" then
keystroke (k as text) using {command down, shift down, option down}
end if
end repeat
end try
end tell
end raccourci
--=====
--[/SCRIPT]
--{code}
tip #2 :
--{code}
--[SCRIPT rotate_cell_contents]
Enregistrer le script en tant que Script : rotate_cell_contents.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner une cellule dont le texte doit être tourné de 90 degrés.
Aller au menu Scripts , choisir Numbers puis choisir “rotate_cell_contents”
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: rotate_cell_contents.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select a cell whose contents must be rotated for 90 degrees.
Go to the Scripts Menu, choose Numbers, then choose “rotate_cell_contents”
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2011/06/23
2011/06/26 -- No longer use an auxiliary text box. Now keep the text attributes.
2012/01/31 -- edited for Lion
--=====
on run
local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2
local le_texte, la_largeur, la_hauteur, myNewDoc
my activateGUIscripting()
Extract properties of the source/target cell *)
set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
set selection range to range (name of column colNum1 & name of row rowNum1)
end tell
Cut*)
my raccourci("Numbers", "x", "c")
Trigger Preview *)
tell application "System Events"
if "Preview" is not in (name of every application process) then launch application "Preview"
end tell
delay 0.2 -- required
New document from the clipboard *)
my raccourci("Preview", "n", "c")
Rotate to left *)
my raccourci("Preview", "l", "c")
Copy *)
my raccourci("Preview", "c", "c")
Quit *)
my raccourci("Preview", "q", "c")
(system attribute "sys2") < 7
if result then
Click the [Don't Save] button in the warning sheet *)
tell application "Preview" to activate
tell application "System Events" to tell application process "Preview" to tell window 1
name of buttons
repeat 50 times
delay 0.1
if exists sheet 1 then exit repeat
end repeat
tell sheet 1 to click button 2
end tell
end if
Back to Numbers *)
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
-- just reset the focus on the table
end tell
Paste in the cell *)
my raccourci("Numbers", "v", "c")
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
local d_name, s_name, t_name, row_num1, col_num1, row_num2, col_num2
tell application "Numbers" to tell document 1
set d_name to its name
set s_name to ""
repeat with i from 1 to the count of sheets
tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
if maybe is not 0 then
set s_name to name of sheet i
exit repeat
end if -- maybe is not 0
end repeat
if s_name is "" then
if my parleAnglais() then
error "No sheet has a selected table embedding at least one selected cell !"
else
error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
end if -
How can I get the "text" field from the actionEvent.getSource() ?
I have some sample code:
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.ArrayList;
public class JFrameTester{
public static void main( String[] args ) {
JFrame f = new JFrame("JFrame");
f.setSize( 500, 500 );
ArrayList < JButton > buttonsArr = new ArrayList < JButton > ();
buttonsArr.add( new JButton( "first" ) );
buttonsArr.add( new JButton( "second" ) );
buttonsArr.add( new JButton( "third" ) );
MyListener myListener = new MyListener();
( (JButton) buttonsArr.get( 0 ) ).addActionListener( myListener );
( (JButton) buttonsArr.get( 1 ) ).addActionListener( myListener );
( (JButton) buttonsArr.get( 2 ) ).addActionListener( myListener );
JPanel panel = new JPanel();
panel.add( buttonsArr.get( 0 ) );
panel.add( buttonsArr.get( 1 ) );
panel.add( buttonsArr.get( 2 ) );
f.getContentPane().add( BorderLayout.CENTER, panel );
f.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE );
f.setVisible( true );
public static class MyListener implements ActionListener{
public MyListener() {}
public void actionPerformed( ActionEvent e ) {
System.out.println( "hi!! " + e.getSource() );
// I need to know a title of the button (which was clicked)...
}The output of the code is something like this:
hi! javax.swing.JButton[,140,5,60x25,alignmentX=0.0,alignmentY=0.5,
border=javax.swing.plaf.BorderUIResource$CompoundBorderUIResource@1ebcda2d,
flags=296,maximumSize=,minimumSize=,preferredSize=,defaultIcon=,disabledIcon=,
disabledSelectedIcon=,margin=javax.swing.plaf.InsetsUIResource[top=2,left=14,bottom=2,
right=14],paintBorder=true,paintFocus=true,pressedIcon=,rolloverEnabled=true,
rolloverIcon=,rolloverSelectedIcon=,selectedIcon=,text=first,defaultCapable=true]
I need this: "first" (from this part: "text=first" of the output above).
Does anyone know how can I get the "text" field from the e.getSource() ?System.out.println( "hi!! " + ( (JButton) e.getSource() ).getText() );I think the problem is solved..If your need is to know the text of the button, yes.
In a real-world application, no.
In a RW application, a typical need is merely to know the "logical role" of the button (i.e., the button that validates the form, regardless of whether its text is "OK" or "Save", "Go",...). Text tends to vary much more than the structure of the UI over time.
In this case you can get the source's name (+getName()+), which will be the name that you've set to the button at UI construction time. Or you can compare the source for equality with either button ( +if evt.getSource()==okButton) {...}+ ).
All in all, I think the best solution is: don't use the same ActionListener for more than one action (+i.e.+ don't add the same ActionListener to all your buttons, which leads to a big if-then-else series in your actionPerformed() ).
Eventually, if you're listening to a single button's actions, whose text change over time (e.g. "pause"/"resume" in a VCR bar), I still think it's a bad idea to rely on the text of the button - instead, this text corresponds to a logical state (resp. playing/paused), it is more maintainable to base your logic on the state - which is more resilient to the evolutions of the UI (e.g. if you happen to use 2 toggle buttons instead of one single play/pause button). -
How can I program the text fields in my email forum to have rounded corners
How can I program the text fields in my email forum to have rounded off edges or corners.
this is the code im using.
// insert code here// insert code here// prepare email field
var email = sym.$("email")
email.html("Enter your Email: ");
inputEmail = $('<input />').attr({'type':'text', 'value':'', 'id':'email'});
inputEmail .css ('font-size', 14);
inputEmail .css ('width', 350);
inputEmail .css ('background-color', '#4e4e4e');
inputEmail .appendTo(email);
// prepare topic field
var topic = sym.$("topic");
topic.html("Topic: ");
inputTopic = $('<input />').attr({'type':'text', 'value':'', 'id':'topic'});
inputTopic .css ('font-size', 14);
inputTopic .css ('width', 350);
inputTopic .css ('background-color', '#4e4e4e');
inputTopic .appendTo(topic);
// prepare message field
var message = sym.$("message");
message.html("Message: ");
inputMessage = $('<textarea />').attr({'type':'textarea','rows':'10', 'cols': '25','value':'', 'id':'message'});
inputMessage .css ('font-family',"Arial,Helvtica,sans-serif");
inputMessage .css ('color',"#ffffff");
inputMessage .css ('font-size', 14);
inputMessage .css ('background-color', '#4e4e4e');
inputMessage .css ('box-shadow', '#4e4e4e');
inputMessage .css ('width', 350);
inputMessage .css ('height', 150);
inputMessage .appendTo(message);
var submitBtn = sym.$("btn");
submitBtn.html("Submit");
submitBtn.css("text-align", "center");
submitBtn.css("font-size",14);
submitBtn.css("font-weight","bold");
submitBtn.css("color","#ffffff");Try this: inputEmail.css ('border-radius', '25px');
attachment
more details -
How can I make the text bigger in iCal?
How can I make the text bigger in iCal? I've looked at Preferences and View.
Sorry, did not see that you are using 10.6.7
-
How can i see the text of one view?
I want to see the text of one view stored in my Oracle DB, then i run the next query:
SELECT TEXT FROM ALL_VIEWS WHERE VIEW_NAME = view_name;
The problem is that the information return me truncated.
How can i see the text of one view?
Sorry, my English is terrible.
I'm from Argentina.Use 'set long 100000000' at sql prompt. Run your query again.
-
How can i make the text bigger?
How can i make the text bigger?
1. press "T" to bring up the text tool.
2. click the text you want to edit
3. highlight the text you want to change size with your cursur
4. If it's not already up, press Command + T to bring up the text tool box and adjust the size under the character group. The value you want to change will have a "TT" next to it.
If this doesn't help. More details will help us help you. -
How can I view the text messages sent and received on one of the other phones on my plan?
You would have to view them on the other phone.
-
How can I change the text color in pages
Hi , how can I change the text color in pages app
Select the text you want to change.
Tap the i in the top bar.
Tap Style in the top bar.
Tap the Font name/size
Tap Color then choose the color you want the text. -
How can I modify the text of the automatically created emails of WAS 6.40.
Hi community,
I have a question. How can I change the text of then email which ist automatically send by the EP6/WAS6.40 when I create a new user. The email displays the message "Dear Sir or Madam, your user xzy was created with the following password xxx."
How can I modify this text. Where is it located in the Enterprise Portal / WEBAS 6.40 .
Thank you.
Best Regards,
Olaf ReissNot easily or readily available as of now. It WILL be part of the new features in the NetWeaver 04 release. (*This same question was asked in my EP6 certification class one week ago and this is the answer I got.)
Found this guide in another post...it should help doing what you need manually...
http://help.sap.com/saphelp_nw04/helpdata/en/33/d494c86203ea40b7b44ddd471baab1/frameset.htm
Hope this helps!
CS -
I have added metadata in Prelude. How can I see the text in Premiere?
I have added metadata in Prelude. Now in Premiere, I can see the "speaker" but none of the text I added. How can I see the text in Premiere?
Message was edited by: Kevin Monahan
Reason: More searchable titleBoth the Project and Metadata panels in Premiere Pro have a Metadata Display dialog that allows you to select which metadata properties are displayed. To access this dialog, right-click the panel's tab and select Metadata Display.
-
How can I fix the text in my photo book that reads"your default text had not been edited. Printed books will not include this text?"
You will get this warning, if your book includes textboxes that still include the default text, like "Insert Title". You need to find these boxes and add your own text. Look for boxes like this:
Make a PDF-preview of your book and look, where the preview differs from what you are seeing in iPhoto.
iPhoto, Aperture: Previewing an order in iPhoto or Aperture -
How can I change the text in an iPhoto book from Spanish to English?
How can I change the text in an Iphoto book I'm trying to create from Spanish to English??
In the Creative Cloud Application you can change in Preferences the App language. Then you can download and install additional the other language.
With Photoshop you can now go to Preferences > User Interface and switch between all installed and available languages. -
How can I change the text in F1 Help?
I made a General Text in T-code SE61, the name is 'ZTEST'.
And at the SE80, in the local program,
I used functions like these:
HELP_OBJECT_SHOW
HELP_OBJECT_SHOW_FOR_FIELD
DSYS_SHOW_FOR_F1HELP
These functions can display F1 HELP.
But I want to send a text using functions,
and display F1 HELP.
Example)
'Hello! This is your program.'
Sending this to F1 HELP by functions, and display.
If you know, please help me.
Thank you.
Edited by: Jaime White 999 on Apr 19, 2011 9:20 AMMy source is like this:
REPORT z_test008.
DATA: lt_links TYPE TABLE OF tline.
SELECTION-SCREEN: PUSHBUTTON 2(6) s_button USER-COMMAND click.
INITIALIZATION.
s_button = 'uB3C4uC6C0uB9D0'.
AT SELECTION-SCREEN.
CASE sy-ucomm.
WHEN 'CLICK'.
CALL FUNCTION 'HELP_OBJECT_SHOW'
EXPORTING
dokclass = 'TX'
doklangu = sy-langu
dokname = 'Z_TEST'
doktitle = 'Description'
* CALLED_BY_PROGRAM = ' '
* CALLED_BY_DYNP = ' '
* CALLED_FOR_TAB = ' '
* CALLED_FOR_FIELD = ' '
* CALLED_FOR_TAB_FLD_BTCH_INPUT = ' '
* msg_var_1 = ' '
* MSG_VAR_2 = ' '
* MSG_VAR_3 = ' '
* MSG_VAR_4 = ' '
* CALLED_BY_CUAPROG = ' '
* CALLED_BY_CUASTAT =
* SHORT_TEXT = 'X'
* CLASSIC_SAPSCRIPT = ' '
TABLES
links = lt_links
EXCEPTIONS
object_not_found = 1
sapscript_error = 2
OTHERS = 3.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDCASE.
I just want to know that how can I change the text in F1 HELP, do not use SE61.
In the source, I want to send the text by functions, and display that.
Thank you. -
How can I restore the text selection highlight colour to the default black colour in indesign CC ?
Manish Shama, thanks for your speedy response. I was able to get into my MAC settings and change the background from the black to whatever color I like, so that helps (THANKS!). But the real issue is that the selected text does not turn white (even though that's what's specified in my MAC settings), it remains black. I really want to have the selection reverse out as it always has for years and years going all the way back to PageMaker Any ideas?
Maybe you are looking for
-
Mail, Address Book, iCal, Safari problems after 10.4.6 update
Updated to 10.4.6 from 10.3.9 via purchased Tiger disks, and have been having problems with Apple basic applications. Address Book opens, then freezes and must Force Quit. iCal opens, then freezes and must Force Quit. Mail opens, but cannot retrieve
-
I'd like to create a workflow that runs every time the computer goes to sleep. Is it possible to do this?
-
Show odata response message in sapui5
Hello, I want to show the message text of a oData response in a messageBox? Kind regards, Richard
-
Hi, I am interested knowing, if there is any BAPI available for doing Inbound Delivery in SAP. I have a requirement to do partial inbound delivery which I cant do with VL31n or VL30. even if can do with these transactions, I will not be able to run t
-
Correcting a 'Schoolboy error??'
i have a hour worth of rushes with incorrect white balancing, does anyone have a miracle cures, weve got tungsten walls instead of white...? ive heard the 3-way correction could help me, just looking for somebody who may have tackled this type of iss