How can I make a table cell extend beyond the page? The text disappears when the cell becomes larger than the page.

How can I make a table cell extend beyond a page? The text disappears when the cell becomes bigger than the page. I want the table to continue to the next page.

As a student, you might be able to get Office for Mac from the college bookstore at a substantial discount. Otherwise, I think your best option for documents that need to be shared with Office users is to get one of the free Office clones such as LibreOffice.

Similar Messages

How do I get the screen to refresh when drawing a line larger than the art board

How do I get the screen to refresh properly when drawing a line larger than the art board when the screen scrolls? Everything turns white in CS6, CS5 and CS4.

Existing art - not the new art. The new art just gets a proxy shape - seen in my example as the blue rectangle. The existing art is what gets smeared as you drag past the edge of the screen. If it's anything other than an Ilustrator thing, it's a Mac thing. I've never known it to be any other way other than maybe in the past showing blank white instead of stuttered art on probably 10 different macs over the years.
Take any art that you've ever created. Zoom in so that your art is bigger than your screen (so that there's somewhere to scroll). Rectangle tool (or move, scale, rotate(?) something, or draw a line) Start your rectangle anywhere, drag so that you are at the edge of the screen, causing it to scroll. The existing art will get all effed up. The rectangle you're drawing will draw as you expect it to - that's not the issue.
How does Wade take his videos?

How can i make a free facetime video call? There's always appearing that my provider might charge for the call?

How can i make a free facetime video call? There's always appearing that my provider might charge for the call?

If you make a call then tap the Facetime button to connect Facetime, the duration of call up to Facetime connection will be charged under your regular airtime. However, duration during facetime conversation will not consume airtime.
But if you tap the Facetime button on the Contact Page, then the whole duration will not consume airtime.
For Facetime to work, both parties must be connected to wifi.

How can I make my Apple tv remote stop interacting with my MacBook and my iMac? Everytime I press the reote, the sound will go up or down on my computers or they will wake up.

How can I make my Apple tv remote stop interacting with my MacBook and my iMac? Everytime I press the reote, the sound will go up or down on my computers or they will wake up.

Welcome to the Apple community.
If you don't want to use a remote with your computer the easiest thing to do is just to turn the IR off. (System Preferences/Security/General)
If you still want to use your computer remote then you must pair your computers remote with the computer AND the Apple TV remote with the Apple TV.
To pair a remote with a device hold down the menu and FF buttons together for six seconds or until you see a chain icon on screen (best take the computer into another room, or turn it off, when you do this)

My ipod touch is 3rd gen how can i update my ios from 4.2.1 to 5.1.1 when i shift restore and load the ipod3_5.1.1.ios its always say your firmware is not compatible

my ipod touch is 3rd gen how can i update my ios from 4.2.1 to 5.1.1 when i shift + restore and load the ipod3_5.1.1.ios its always say your firmware is not compatible

I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

Having trouble with my screen becoming larger than the phone supports. Can this be fixed easily?

Having trouble with my screen becoming larger than my phone supports. Can this be corrected without taking the phone to an Apple store?

The sign on screen (where the current time and the slide to unlock) and if I can get it to open, the next screen that show all the apps. Have been unable to get any further that that second screen. The screen contents appear to be about twice the size they should be. I have been able to "reset" the phone by turning it off, but the problem happening several times a day and now occasioanally the reset does not work. This just started happening about 3 days ago and is increasing in frequency. I have had this phone about 14 months.

How can I make a table cell liquid?

Let me explain...
I have a table on one of my photo pages. It consists of 3 columns, the first which is merged all the way through, and 5 rows.
The last 2 columns house my thumbnails, and the 1st column acts as the "container" of the selected thumbnail.
Now when I select a vertical photo everythin looks great. But when I select a horizontal thumbnail, it is squished to fit in the 1st column.
Is there a way to make that 1st column a "liquid" width so that it can adapt to the size of whicever photo it is displaying?

NEVERMIND - figured it out.

How can I make a table span multiple pages?

Hi guys,
I really hope someone can help me out. First off I am a indesign novice. I have primarily been using indesign scripting to take other user's indesign documents and generating dynamic previews and PDFS with indesign server 2014 (it's pretty cool stuff).
Someone gave me an indesign document that has a table that starts off in the middle of the page and depending on how many rows they want the table to be it should bump the overflow'ed table rows to the 2nd page.
In indesign I have tried to link the text frames together. It looks ok in indesign as the linked content shows up on page two.
Whenever I run the script to generate the preview JPEG the table on page 1 gets cut off and doesn't render anything on page 2.
Using a script I was able to examine all the textframes on the page and none of the text frames have their "overflows" property set to true.
What am I doing wrong here? I'm sure there are a million things I'm missing but what are some of the basic things I can look for. I'm totally lost here guys.
Thanks,
Dustin

DustinMichaels1982 wrote:
Whenever I run the script to generate the preview JPEG…
I'm not familiar with the script you are talking about, but if you want to make Jpegs of your pages, the best route is to export the document as PDF, and then open in Photoshop, where you can save as Jpeg. If creating Jpegs was not your goal, can you explain further?

How can I make a table screen-reader accessible?

I need to make a table screen-reader accessible prior to publishing on the web. Is there any way to make a table accessible in Numbers?

This is difficult to answer without more specifics. How are you publishing to the web? And which screen reader are you targeting? In general you can get data out of a Numbers table quite easily in csv format (either comma-separated or tab-separated). With some work in AppleScript you could export it as a table with html markup. Presumably from there you have tools to convert and publish.
SG

How can I make fact table?

Hi all
I would like to make fact table in oracle 11g using SQL syntax. how can I do so?
Is Analytical Workspace Manager available by defult in oracle 10g or 11g?
Do you recommand good book for implementing star schema or ROLAP? i want the setps and sql syntax examples.
thanks

Hi,
You can make a fact table through any number of ways viz:
- CREATE TABLE syntax , your table design would correspond to the dimensional model (Star Schema / Snowflake Schema) specifications
- You can alternately use an ETL Tool like OWB to design your star schema
As far as I know i dont think Analytical Workspace Manager comes by default with an Oracle DB Installation
- Read any book you find on Dimensional Modeling to get a hang on building Star Schemas and OLAP Concepts. You would definitely find one such book in "The Oracle documentation library"

How can I make a control inside a loop in a subVI change value when the calling VI's control changes?

Hi.
I think this is a pretty basic LV question, but I have not been able to find a good solution.
I am attaching VIs that show the problem I am having, but obviously, the real application is a lot complicated, which forces me to try to do it this way.
The issue is: I have a subVI with a Boolean control inside a loop. When the control is true I want some action to take place. When the subVI is run on its own, it works fine, acting properly when I set the boolean control to true via the LV FPGA interface from the host. However, when I use it as a subVI, in which the top-level VI calls several instances of the subVI, I have the Boolean controls in the top level VI. What is happening is that the false Boolean value with which the top-level VI starts is passed into the subVIs, and not updated, even though the control is inside the loop.
Can any one suggest a good solution?
Thanks,
AlejandroZ
Attachments:
CallingVI.vi ‏7 KB
subVI.vi ‏8 KB

Hi.
I know the example I posted might seem silly, but it was just to illustrate the problem I am having. In reality this is the application:
I have some LV FPGA code which uses a few FPGA IO to implement a serial link to communicate with a device. Most of the time we are getting data from the device, so the serial link is used to send a read command, read in the data and put it into a FIFO. However, I also wanted the VI to support sending data to the device, so I added an array control to put the data you want to send, and a boolean control to tell it you want to send it.
Since sending and receiving data are done using the same FPGA IO, they cannot be independent operations, because they would garble each other. Therefore, in the subVI I have a loop in which I first read data if there is any to read, then check the boolean write control to see if there is data to write.
As I mentioned, this works perfectly for talking to a single device. However, we run into the issue of this topic when trying to replicate this for several devices.
One easy solution is to not have the loop in the subVI, and have it in the calling VI (I am favoring this simple solution right now). The only reason why I have not done this yet, is that the subVI has more than one loop, so I am going to have to create several subVIs. I just posted to see if there was an even simpler solution...
There have been some other possibly good solutions proposed here, though I am not sure if they work in LV FPGA.
Thanks for all your responses.
AlejandroZ

How can I make a table continue in same page

I have a three column table, I want it to continue on the same page instead of continuing into a next page, is there a way to do this?

Hi Javier,
A solution by Badunit
Table 1
a
b
c
d
e
f
g
h
Table 2. Formula in B2 (and fill Down and Right)
=IFERROR(IF(OFFSET(Table 1::$B$1,ROW()−1+(COLUMN()−2)×(ROWS(B)−1),0)="","",OFFSET(Table 1::$B$1,ROW()−1+(COLUMN()−2)×(ROWS(B)−1),0)),"")
a
d
g
b
e
h
c
f
Table 2 can be any shape.
Regards,
Ian.

How can i make it where if data is entered into a field it is mirrored to another field within the document?

I do not want them named the same as I don't want the second one appearing until after it is entered into the first field.

Hi,
If the form fields have the same name then the data entered in one field will be auto populated in other with the same name. For example, if there is a form field named custom field 1 in one document and there is another field with the same name(custom field 1) in the other document and you upload them together into a single transaction and send the document, then the data entered in custom field 1 in one document will be auto populated in custom field 1 of other document as well. This also applies for one document only as well.
Does this help?

How can I get rid of a green vertical line (edge of text box) when I export as jpeg?

It just won't go away. Can you help?

Please repost in the Adobe application you are using. This forum is for general design questions.

How can I make a tent with two halves of the info ( and pictures one direction and the other half the opposite direction ( towards each other of course)

How can I make a table tent in PAGES with both halves of the info and pictures turned towards each other? I can figure out how to turn just the picture upside down AND the text sideways, but not upside down with the picture included so that it is at the top and not the bottom!

Layout the picture and text (in text boxes) the way you want them in the lower half of the page. Then Select All and Group them. With the Group selected, type Cmnd+D to duplicate it and then hold down the Shift and Command keys and grab a corner box (you’ll see a double headed arrow) and rotate the box until it’s upside down. (Holding down the Shift key will constrain the rotation to 45 and 90 degree positions.) Now drag the box into position in the top half of the page.
Walt

How can I make a table cell extend beyond the page? The text disappears when the cell becomes larger than the page.

Similar Messages

Maybe you are looking for