How can I make all my tracks start at the same time? In bar 0 to be more specific

HI! I want all my tracks to start at the same time. I need teh audio files to start at bar numer cero.

Hi, first you'll have to adjust the project start to bar zero like shown here:
http://help.apple.com/logicpro/mac/10/#lgcpce0833d7
…then select all regions in your project and make sure the playhead is positioned at the start of bar zero exactly, now follow this:
Have a nice day!

Similar Messages

  • I have an iphone 4 how can I delete all my junk mail at the same time without having to selct each maessage

    How do i delete or empty all the messages in my junk email at the same time without having to mark each message?

    Not certain, but this can fix myriad Mail problems...
    Safe Boot from the HD, (holding Shift key down at bootup),  it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move this folder & file to the Desktop.
    Move this Folder to the Desktop...
    /Users/YourUserName/Library/Caches/Mail/
    Move this file to the Desktop...
    /Users/YourUserName/Library/Mail/Envelope Index
    Reboot.
    If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
    /Users/YourUserName/Library/Mail/MessageRules.plist
    /Users/YourUserName/Library/Mail/MessageRules.plist.backup
    Note, in 10.5 & up /Users/YourUserName/Library/Caches/Mail/ may or may not exist.

  • HT1373 How can I make all of my devices use the same iTunes library?

    I have an iMac, Macbook Air, Macbook, iPad, iPhone and an iTouch. So, as you can imagine, I have many devices that need to be on the same page at all times. I take my Air to campus with me and use it for classes, along with my iPad, so I usually plug my iPad into my laptop for updates, dowloads, transfers, charging, etc... The same with my iPhone. However, when I get home and I plug my iPad or iPhone into my iMac, it does this whole (This iPad is currently synced to another library, would you like to Erase & Sync to this library). No. I want my Air and iMac to be the same so I can plug my devices up to either of them without having to worry about erasing or adding anything that I don't want erased or added.
    How, if at all, can I accomplish this?
    Thanks!

    You can't.  An iOS device can still be synced with only one computer.  That is making sense have it referer to multiple files from your computer (backup, iTunes medias, sync information).
    As you will only sync your iOS with one computer, it is iCloud you need to use to keep all your content in sync.  While on the go, you use your iPad for a purchase for exemple, iCloud will allow you to push that purchase to all your devices automatically.  Though, it doesn't mean that it will sync with any devices.
    iCloud will allow you, once properly configure, to use any documents, media, purchases, apps, bookmarks, content, calendar, email... and so one in sync from any of your devices without the assle to sync from an iOS device.

  • How can I get rid of multiple pictures at the same time?

    how can I get rid of multiple pictures at the same time?

    Adobe Bridge, lightroom and your file browser (windows explorer or Mac Finder) can select multiple pictures at once and then delete. If you are looking for more than that for information, you will need to be more specific at what your doing, what OS you have, and version of software your using. If necessary post screen shots so we can see what your doing. The more information we have the more detailed of an explaination can can give back to you.

  • How do I delete all of my mail at the same time?

    How do I delete all of my mail at the same time? Or is this even possible? Thanks for your help.

    Unfortunately it isn't possible. You have to select one at a time. You might want to add your name to the many that have requested this feature in the past.
    https://www.apple.com/feedback/ipad.html

  • I am doing two people's jobs and I need to use two separate log-ins on the same website. How can I keep both log-ins open at the same time. Everytime I switch tabs I have to log in again.

    I am doing two people's jobs and I need to use two separate log-ins on the same website. How can I keep both log-ins open at the same time. Everytime I switch tabs I have to log in again.

    Try one of these extensions for multiple cookie sessions.
    Multifox: <br />
    http://br.mozdev.org/multifox/ <br />
    Cookie Swap extension: <br />
    https://addons.mozilla.org/firefox/3255/ <br />
    Cookie Pie extension: <br />
    http://www.nektra.com/oss/firefox/extensions/cookiepie/

  • How do I make Organizer and Editor open at the same time?

    I'm new to PSE 10 and want to know how to make Organizer and Editor open at the same time. I can get the Organizer up, but have to pick out a photo and click on Fix: Full Photo Edit to get Editor to open. Is that the only way to do it?
    Thanks,
    K

    Create Desktop shortcuts for the Organizer and the Editor:
    The Editor's executable is:
    "C:\Program Files (x86)\Adobe\Photoshop Elements 10\PhotoshopElementsEditor.exe"
    The Organizer's executable is:
    "C:\Program Files (x86)\Adobe\Elements 10 Organizer\PhotoshopElementsOrganizer.exe"
    Ken

  • How can 2 user edit 1 word document at the same time

    hi,
    in office 2013 professional plus, can 2 user edit 1 word document at the same time?

    Hi,
    As far as I know, multiple users can not edit Word file in the same time directly. Could you give me your demand?
    Please check the two follows workarounds if they are helpful:
    http://blogs.msdn.com/b/johnmullinax/archive/2010/04/19/co-authoring-how-two-people-can-edit-one-word-2010-doc-at-the-same-time.aspx?Redirected=true
    http://www.ehow.com/how_7229904_allow-word-document-same-time.html
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Regards,
    George Zhao
    TechNet Community Support
    Hi
    thank you; its worked.
    I'm so excited about this; thank you again.

  • How can I save multiple tabs to open at the same time?

    Hi,
    I have a set of websites that I need to access regularly and I'd like to be able to open all the tabs in a window at the same time rather than clicking on each one individually.  I know this was possible in previous safari versions but I can't figure out how to do it in Yosemite (v8).
    Can someone walk me through how to do this please?  I've googled this but haven't been able to find an answer for this latest version of safari.
    Thanks!

    Try one of these extensions for multiple cookie sessions.
    Multifox: <br />
    http://br.mozdev.org/multifox/ <br />
    Cookie Swap extension: <br />
    https://addons.mozilla.org/firefox/3255/ <br />
    Cookie Pie extension: <br />
    http://www.nektra.com/oss/firefox/extensions/cookiepie/

  • How can I use OnBoard+Aditional audio cards at the same time? !!! BIOS PROBLEM !!!

    I want use both audio cards. The On-board audio + SoundBlaster Audigy. Because I have mp3 player mp3tunes ( from http://www.mp3tunes.nl ) that is able play on both audiocards at the same time. It is good for DJ. One audiocard is for pre-listen.
     But in BIOS is possible set only disable or auto-detect.   When I set autodetect, then OnBoard audiocard is automaticaly disabled if there is another audiocard.  Please tell me, what can I do for enable both audiocards ?

    It's been awhile but as I promised here is my update:
    I purchased an E-MU 1820m Pro Audio interface several months ago and ran it in my system for some time with the onboard audio disabled. Since this audio system is mainly for mid/high end audio production making use of low latency and up to 192mhz sample rates & 20/18 i/o then it is a bit of an overkill for using it for general multimedia & games so I thought I would place my c-media pci card back in and enable the onboard setting & see if the two systems would run ok together.
    I first made sure that I uninstalled the e-mu card & then put the onboard card back in & installed the drivers. I then installed the E-MU, making sure that it wasn't sharing an IRQ with my 9600 pro like it originaly did on the first slot. So after installing that and the IRQ's were looking good I tested it all out and the results after two weeks have been perfect. I use the C-Media audio with the WDM drivers and use it for general audio & multimedia while I use the E-MU card with the E-MU ASIO 2 drivers and I use this with my audio production programs like Sonar, FL Studio & native Instruments Battery & Traktor.
    Conclusion: Yes you can run a pro audio system as well as the onboard sound card with the MSI 865 Neo2 FIS2R.

  • How can I log into two differant accounts at the same time in two windows without the second window affecting the first.

    I'm trying to log into two facebook accounts at the same time in differant windows. When ever I log into the second account in the second window it changes the login in the first window. When I hit home or any other link the first window account has been logged out and logged into the second window account. I tried installing a second copy of firefox in a differant folder that the first but it seems to use all the files of the first installation. If I can get 2 toatally seperated instalations that don't rely on the same history, cookies, cache, etc I belive that will solve my problem. Please help.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; OfficeLiveConnector.1.4; OfficeLivePatch.1.3)

    Nah, that won't work. Facebook has a feature that gets your IP Address, so as soon as you sign into one on the same computer, it changes the other login for safety purposes (say, someone was on a public library PC. They forgot to log out. Someone else logs in, and it automatically logs them out). You'll need 2 computers to do that.

  • How can I get two cameras to aquire at the same time rather than one after the other

    I've got (2) PCI-1428 cards, Two Uniq Vision cameras with power supplies, cameralink cables, and IMAQ-D6804 cables. Both cameras are being triggered by the same switch, but they are not grabbing images at the same time. Right now it is triggering one camera as desired, but the other doesn't aquire until after the time-sensitive event. On the next test, the two camera will trade these roles. I am using 2 cards, so they should acquire at the same time. How do I change it so that they grab images at the same time? Thank you for your help.
                                                      ​            Deater

    Hi Deater,
    Thank  you for your post.  Triggering from two cameras at the same time may be a little trickey, but it can be done.  There are multiple ways to tackle this problem.  If you have a RTSI cable, you can RTSI the two PCI boards together internally to lock them in HW.  You should also be able to use the triggering line on each board.
    One of the best methods for triggering multiple boards is called GenLocking.  The following Developer Zone page describes GenLocking more fully and has several examples to help you out: http://zone.ni.com/devzone/conceptd.nsf/webmain/a3​87b5c0ac6f6f4e86256c87005fcddf.
    The "HL Grab with two boards.vi" shipping example is also a good example of the code needed to trigger two individual boards in LV.  I found a similar post that may be of some help as well: http://forums.ni.com/ni/board/message?board.id=230​&message.id=2691&requireLogin=False
    Hope this helps!
    Thanks,
    Scott Savage
    National Instruments
    Applications Engineering
    www.ni.com/support

  • How can i make Event witch is started before the page render.

    hello i want to do this :
    when i open some JSP no matter from where i want to have a backing bean for this jsp that have a method that starts before the render response.
    my ideas is to have a list of records from a sql server and i need a method that makes a conncetion to the sql server and add everythink in the request so when the jsp is displayed to have content.
    i need example of the backingbean method paste plz.

    I think you can add the sql coneection and all those initial things to the constractor of the bean which contains the variable u need in the page..
    and leave the getters and setters of those variables empty..
    if the DB changes frequently, you can make the scope of the bean: page scope
    otherwise let it be session scope..

  • How can I make my movies always start from the beginning?

    I want to use my iPod to present short videos as part of a live presentation. I've conquered the hurdles, and have the iPod sending video out to my projector, but I want to ensure that every movie starts at the beginning, even if I had cut it short in the last presentation.
    I thought I saw a setting for this somewhere, but now I can't find it.

    WaMuHIP07 wrote:
    Right-click the videos that you want to always start from the beginning in iTunes. The options tab of the video file properties contains this option control. Uncheck the box that says "Remember Play Postion."
    Or hit the left side of your scroll wheel when launching it on your iPod

  • How can I make my projects in GarageBand sound the same when listening with speakers as it sounds when listening with headphones on?

    Hi, I'm trying to export a song that I made in Garageband using mutliple tracks and a backing track. It sounds great in the headphones and all the levels are good. But, once I export and listen with my speakers, the levels are different, but sound good once I plug my headphones back in. I'm hoping to use the song in a video that will play through speakers, so I really hope someone can help. I'm new to Garageband, so I could use all the help. Thank you for your time!

    What you describe has nothing to do with GarageBand.
    Every speaker system or headphones have their own characteristics which can be measured and documented with a frequency response diagram. That describes that some speakers/headphones sound more boomy or less "bright" than others, instead of neutral.
    There are a ton of other parameters that influence the sound:
    Playing too loud (for the amp or speakers) can introduce distortion that alters the sound even before you recognize it as (nasty) distortion.
    The same song sounds different when played back with different levels. This is a trick your ear is playing on you. It is documented in the Fletcher Munson curves.
    The acoustic plays a major role. With headphones, you eliminate the acoustic environment compared to your speaker that reacts to your room and any room resonance.
    The placement of your speakers. Putting them against the wall gives you a 3dB boost in the lower frequency range (depending on the room dimensions). Putting them in the corner adds another 3dB. Placing one speaker in a corner and the other one not is even worth.
    The list goes on ...
    People spend their money on all kinds of plugins and often forget that the convertes like microphone (sound comes in) and speakers (sound comes out) are the most important components (besides your ears). Investing in good speakers is a good start. When buying headphones, make sure they are real headphones and not fashion accessories like Beats.
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

Maybe you are looking for