How can i make available 2 licences of CS6 to 6 people on a Windows 7 environment

I have purchased 2 licences of Creative Suite 6 and I am trying to distribute it to 6 machines and have only 2 of those machines be able to use CS6 at any one time. Can someone pls help me do this?

Hi foberhuber,
Welcome to the Community!
We would suggest you to install the software on 4 machines and use 2 at a time, installing the software on 6 machines is possible however activations will be messed up.
Thanks!
Ankit

Similar Messages

How can I make Use of PS and Ai (offer) in spite of running Windows Vista ?

How can I make Use of PS and Ai (offer) in spite of running Windows Vista ?

Once you have signed up, you could - in theory - choose "other version" under the icon on the CC website and install CS6, but I'm not sure if that works for this special offer or only for "full" CC. Anyway, it seems simple enough to upgrade to Win 7 or Win 8 and perhaps you were planning on starting fresh, anyway...
Mylenium

How can I make Adobe Photoshop 5.0LE work on my new PC running Windows 8?

How can I make Adobe Photoshop 5.0LE work on my new PC running Windows 8?

Adobe Photoshop LE is too old. I do not think it will work in compatability mode. It was made circa 1998 before XP. It is time to pony up for new software. Adobe Photoshop Elements is inexpensive and provides a world of capabilities undreamt in 1998.

How can i make a back up on my desktop ? i have pc windows and itunes 11.0.4

how can i make a back up full on my pc ? i have iphone4 version 6.0.1 with itunes 11.0.4 ?

Hi.
Messages are included with the iPhone's backup which is updated by iTunes as the first step during the iTunes sync process.
Are you wanting access to your messages on your computer?
If so, there are 3rd party utilities that provide for extracting messages and other data from your iPhone's backup on your computer's hard drive, or transferring messages from your iPhone for access on your computer.

How can I make a spread wider in CS6?

I have code to resize a spread which is crashing. Is there a constraint imposed by the underlying pasteboard? If so how can I increase the width available for the spread? I'm running Windows 7, CS6 SDK. The crashing code is:
PMRect newPasteBoard(-width/2, -depth/2, width/2, depth/2);
UIDList items(spreadUIDRef);
PMRectCollection newFrames;
newFrames.push_back(newPasteBoard);
result = Utils<Facade::IGeometryFacade>()->SetItemsBounds(
     items,
     Transform::PasteboardCoordinates(),
     Geometry::OuterStrokeBounds(),
     newFrames
     );//************** This call crashes. Width, depth are 10000 and 984

beebibi12 wrote:
Trevor Dennis, The healing brush set to Content Aware in combination with the Shift key etc. works great for straight lines but in my case the strings are not in a straight line
Best, Bee
Your'e kidding me. Right? You don't have to do the entire length of the line in one stab.
beebibi12 wrote:
Could you please expand on the idea with the alpha channel mask and Curves adjustment layer -
Thanks,
Best, Bee
Forget the Alpha mask idea. I'm home now and it is a total non starter in this case. But try some of these if you want to learn the technique

How can I make the background of the Menu Bar white? I have Windows Vista

After downloading the latest version of Firefox, the Menu Bar and the one underneath have a dark background that do not permit me to see the words or signs clearly. How can I fix this?

You may have installed a persona that isn't working properly for you.<br />
You can uninstall your current Persona and revert to the Default theme (Tools > Add-ons > Appearance/Themes).
See:
* https://support.mozilla.com/kb/Using+themes+with+Firefox
* http://kb.mozillazine.org/Themes (Lightweight theme)

How can I make a DVD and send it to other people

I want to submit a plan of ideas to the management of my company and I would like to submit them on a DVD, How do I do that?

Do you have a Officejet 8500a?
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Realtek network card seems to be disappeared. how can i make it visible again for the OS?

i can't access my LAN card. somehow it is disappeared. how can i make it visible again for the OS? my OS is windows 7. thanks very much for your help

right click on the button bar, then select "customize toolbar", drag any button you like into the toolbar and you're done!
Diego

How can I make a new genius mix? Apple has made two automatically, but I would like one based on other genres within my iTunes library. I have tried updating my genius mixes to no avail.

How can I make a new genius mix? I do not want to make a genius playlist. Genius has already created two mixes but I would like another based on other genres within my extensive music library. I have tried updating Genius from Store>Update Genius but to no avail. Thank you!

Hi. The two user tips both describe a sequence of steps that should get your library from the point where it threatens to wipe data from your device to where it is syncing normally, while recovering as much information as possible. It may still be necessary to wipe and reload the device but this should only take place once all the data that can be recovered has been recovered.
Doing step 1 of 8 and then complaining things aren't the way you want them to be yet strikes me as premature...
Since you appear to have all your media content, and we are discussing an iPod classic, not an iOS device, the main worries are already taken care of. What's left is ratings, playcounts, playlist membership and checked status. Since your device holds only part of your library at best you could only recover the missing data for the content that is on the device using third party tools.
Recreating the previous checked/unchecked status of every track in your library from where you are now may not be that easy. Syncing with selected playlists has many advantages, one of which would have been that you would have a named playlist that could have been retrieved by 3rd party software if you had used this method.
You haven't explained what caused your problem in the first place, but if you have a Previous iTunes Libraries folder holding old copies of your iTunes database (generated with each iTunes update) then it would be possible to restore the most recent of these and then update the library with any changes in your media folder.
BTW Apple doesn't offer free support for this kind of issue with iTunes.
tt2

How can I make an invalid dynamic disk Array available to the OS again

Hello Storage Pros
The setup
I have a Promise VTrak E610f head unit with 2 VTrak 610j expansion units attached to it together giving me over 27 TB of usable storage space.
At the hardware level I slip the storage into 6 parts containing 7
1TB disks and had the parts configured into 6 RAID 6 arrays. In the end; each of the 6 arrays gives me 4.6TB of usable storage space.
On the OS level, I have the storage attached to 2 servers: Windows server 2008 and windows server 2008 R2 over a Qlogic fiber channel switch. Each of the 6 arrays are viewable as basic disks of 4,6Tb which I went on to configure as a single RAID 0
spanned volume of 27TB and for that all the disks had to be converted to dynamic.
The problem
Now comes the problem: On my first attempt to do a firmware update on the VTrak E610f storage; all the volumes were rendered foreign and I had to import them to be able to use them. Although the import was successful, I lost all the set NTFS permissions
and SMB share and I had to manually reconfigure them. Upon doing so The OS registered some inconsistencies in the storage and recommended that I ran chkdsk. Since the storage is that big I reluctantly complied and restarted the server.
The first server was restarted BUT chkdsk did not commence as scheduled, the server powered right up. After logging in to inspect; I discovered - to my surprise, that the disks were now shown as invalid in Disk Manager and were no longer visible to
the OS. Assuming that maybe a restart of the other server and the storage would set things right, I went ahead to do so but to no avail. After rebooting the entire system (including the storage), the other server also displayed the disks as invalid and were
no longer visible to the OS as well.
My question is; how can I make the disk available again from this ‘invalid’ state without losing data?
What I tried but did not help:
Taking the disks offline and then online again did not work, after the disks were online again, they still appeared as invalid.
Reactivating the disks threw an error “operation not allowed on an invalid disk pack”
Calling support of the storage manufacturer: they did not find anything wrong with the system, after 5 hours we had to stop.
I fear converting the array from dynamic to basic will destroy all the data.
HxD is showing no errors in the disks
If there is any expert out there with helpful tips; your assistance will be greatly appreciate.
Cheers
John

Hello Shoan
Thanks a lot for your response and tips. Sorry I could not get back to you in good time for I had to run some of the tests you provided, it took some time to
thoroughly re-test the system.
The summary
The initial firmware upgrade attempt forced 3 disks offline and the other 3 became foreign. I had to re-import them to have access again. after re-importing
the disks I realized all NTFS permissions and SMB shares of the folders on the disks had disappeared, but at least the disk was visible and accessible at that point - but not fault free. It was recommened that I let chkdsk run. However rebooting the
system to allow chkdsk to run did not result in chkdsk running, instead chkdsk did not run and after restart, the OS showed the disks as invalid. And that is still the case now.
Response to your questions:
Yes the storage array was (and is still) connected to another server 2008 R2 server when the problem occurred. The second server is also displaying the same problem: the disks are shown as invalid.
The loss of SMB shares and NTFS permissions occurred after the initial firmware upgrade attempt, some disks (3 out of 6 of them) were forcibly offlined and the other 3 were, suddenly, marked as foreign. In the end, and to have access to the disks
I had to online the offlined 3 disks and then reimport the rest of them. From the way I understand it, if the upgrade was not the cause, then at least it was the trigger.
In as far as converting disks from dynamic to basic, I was not in luck so far:
Three of the companies I have contacted (recommended by promise Technology technician) so far only work with smaller disks like 2TB, 27 TB like I have is so
far too big.
I’m not sure converting the disks to basic will help much though, since that would break the single 27 TB volume which the OS was working with into 6 individual
disks of 4.6 TB. Will I be able to get the data back that was written to just one volume from those 6 individual and unrelated disks?
Above all, I have connected the RAID storage system to a newly installed Server 2008 R2, the disks are also shown as invalid.
I have spent more than 17 hours in remote sessions with a Promise Technology technician trying the resolve the issue. From the technician’s side all seems in place with the exception
that the disks are invalid in the OS.
I have contacted Microsoft Customer Support service with the issue. Given that Microsoft did not manufacture the storage unit, can they help at this point – or am I better off
putting my hopes else?
Your help is always appreciated and again, thanks for your response and advice.
JohnV

HT2509 I have installed a font from the internet into Font Book and saved it in my Fonts folder under my user library. How can I make it available in Word to type a document?

I have installed a font from the internet into Font Book and saved it in my Fonts folder under my user library. How can I make it available in Word to type a document?

Font Management in OS X

How can I make the media size print option "custum" become available if it is not currently?

How can I make the media size print option "custum" become available if it is not currently?

See this article also: http://readwrite.com/2013/10/15/ios-7-fixes-iphone-4-4s#awesm=~oktbEwjOyyvr80

How can I make the Help Topics available offline?

How can I make iBooks Author Help Topics available offline?

Deleted and re-installed...
Still get the following:
The selected topic is currently unavailable
Make sure you’re connected to the Internet. For help connecting, choose Apple menu > System Preferences, click Network, and click “Assist me.”
If you’re connected to the Internet, and the content still doesn’t appear, try again later.

I have Win 7 saved (installation file) in My MacBook Pro Licence version. How can i install it on MacBook Pro. After installation how can i make it to work with Parallel desktop or VMware fusion software.

I have Win 7 saved (installation file) in My MacBook Pro Licence version. How can i install it on MacBook Pro. After installation how can i make it to work with Parallel desktop or VMware fusion software. I can buy these softwares.

http://www.simplehelp.net/2009/02/02/how-to-install-windows-7-in-os-x-using-para llels-desktop-a-complete-walkthrough/
http://blogs.parallels.com/consumertech/2011/10/24/install-windows-right-from-wi thin-parallels-desktop-7-guest.html

How can I make my app available with out logging in

Hi guys,
How can I make my application available with out logging in. In other word, it should work as a normal website no user name or pass word is required ?
Best Regards,
Fateh

Hi Fateh,
Edit your page, and under the security of your page change the authentication from page requires authentication to page is public
Authentication: page is PublicSo, that your page wont ask for a login.
Brgds,
Mini
Mark Answers Promptly

How can i make available 2 licences of CS6 to 6 people on a Windows 7 environment

Similar Messages

Maybe you are looking for