How can I make open link in new tab cause tabs to the new tab's left to shift left rather than tabs to the new tabs right to shift right?

When I follow a link in a new tab, the tab opens to the right of the current tab as expected. To make room for the tab on the tab bar, any tabs to the right of the current tab shift right. If there is room for all the tabs on the bar, this behavior is perfect. If however, there isn't sufficient room, some tabs must be hidden to the right or the left of the visible bar. Currently the rightmost visible tab is hidden. This behavior is suboptimal for me because I very often want to switch to tabs on the far right while I very seldom want to switch to tabs on the far left. Is there is a way to cause tabs to the left of the new tab to shift left thereby hiding the leftmost visible tab? Thanks

I'm not aware of a way to make Firefox hide the first tab instead of the last tab; maybe there is an add-on with that feature.
There is a hidden setting to open the new tab at the end of the bar instead of next to the page you're reading. Then, of course, you won't have this problem. Instead, you'll have the problem that it's hard to figure out which tab had that link in it. In case you want to try it out, here's how.
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''tabs''' and pause while the list is filtered
(3) Double-click the '''browser.tabs.insertRelatedAfterCurrent''' preference to switch it from true to false (it should turn bold)
You're done here. You can keep it open in case you hate the change and watch to switch it right back. In that case, double-click again to switch it back to true.

Similar Messages

  • How can I make "Open Link in New Tab" open the new tab in the same window, not a different window?

    When I Ctrl-click a link and choose "Open Link in New Tab" it chooses to open the new tab in a different window (one that's already open) rather than opening the new tab in the same window. Even though the other window is minimized, it automatically gets restored and placed on top of the window I was in. This interferes with my context, forcing me to minimize the window again to get back to the one I was in before. I want the new tab to open in the same window, so I can still see the tab I was in. Some links seem to have the "Open Link in New Tab" behavior automatically, so I never know when I'm going to get thrown out of my current window. Very annoying.

    If you have a mouse with a scroll button then try to middle click the link to open the link in a new tab.
    It is also possible that the links use onclick JavaScript instead of a href to specify the action.
    See also:
    * http://kb.mozillazine.org/browser.link.open_newwindow.restriction
    * http://kb.mozillazine.org/browser.link.open_newwindow

  • How can I make sure linked in contacts are only added once?

    For some reason the linkedin contacts are appearing endlessly in my mac address book. Every time I delete they come back - Very annoying especially since I have to delete folders manually one by one. How can I make sure linked in contacts only added once? And how can I delete from mac address book  in one go?

    If you installed software from LinkedIn to synchronize the contacts, refer to the developer for support. Otherwise, how did you import the contacts?

  • How can I make a link in a AccordionTab?

    Hi,
    This is my website:
    www.student.tue.nl/V/b.a.t.moor
    As you can see the basis for my website is a Spry Accordion.
    The words with a large font-size are the first navigationlevel. The
    smaller words in the Tabs are the secondaire navigationlevel. Now I
    want to make it this way that when you click on a single word (for
    example: first ideas), you will enter a new page. So it has to link
    to another document (i.e. firstideas.html)
    Is this possible? If so, how can I make this?

    Problem is that its a tab menu. The very nature of the
    javascript that
    drives it is to open that tab anywhere where the mouse clicks
    along its
    length. As the links are also in the tab it just ignores
    these and opens
    the tab.
    Can you not move the links to within the sub-section of the
    tab, that's
    how things usually work with a tabbed menu.
    I'm sure its not impossible to achieve what you want but it
    might be
    beyond your capabilities. It certainly looks as though you
    would need to
    alter the code substantially and maybe re-write the
    javascript to make
    it conform.
    Bas-TUe wrote:
    > Hi,
    > This is my website:
    http://www.student.tue.nl/V/b.a.t.moor
    >
    > As you can see the basis for my website is a Spry
    Accordion. The words with a
    > large font-size are the first navigationlevel. The
    smaller words in the Tabs
    > are the secondaire navigationlevel. Now I want to make
    it this way that when
    > you click on a single word (for example: first ideas),
    you will enter a new
    > page. So it has to link to another document (i.e.
    firstideas.html)
    >
    > Is this possible? If so, how can I make this?
    >

  • Can I make opening links in new tabs the default?

    I know I can open links in a new tab by right-click and choose open link in new tab. Is there a way to make this method the default choice so I don't have to right click? I use windows 7

    Click using the middle button on the link.

  • How do I make "open link in new tab" go back to the second line after "open"?

    I've newly upgraded to FF4.0 but I'm so used to opening new tabs by right-clicking a link and choosing "open link in new tab" instinctively by moving down a notch and clicking it as the second selection. FF4.0 new has it as the first option. Is there anyway to reposition it?

    Please click the '''Solved'''' button next to the answer that solved your Firefox support issue, '''when you are logged in''', so this thread gets marked as '''Solved''' to help other users who may have this same problem.

  • How can I make a link or icon to a document on my iPad?

    I would like to create a bookmark icon on my iPad to a document I create. I can email my documents to myself without any problem or make a link from dropbox, but I would like to be able to make a link that I can open on my iPad without being online.  For instance, I can e-mail a document to myself and then open it in different apps, but I am not given a choice of creating a link or bookmark icon on my iPad to get to that document quickly for when I don't have Internet access.

    If you open the document in Adobe Reader, then Adobe Reader will keep a copy of the file. You can later launch Reader and open it from there while offline.

  • How can I make a link to EBS from BIEE 11g?

    Hello, I have some trouble with BIEE.
    I tried to make a link to EBS from BIEE using Action, but it doesn't work.
    I read manual and set as it is written, but when I click the link I got
    message which says that "Oracle eBusiness Suite Server cannot be used now.
    Please try it again.
    If it won't be solved, contact to support desk".
    I tried to edit xml files in many ways, but it doesn't work...
    The document and posts about making link to EBS from BIEE 10g can be
    often found on internet but not about 11g.
    If anyone knows about this solution, please help me.
    Yuchi

    Hi Daan,
    Thank you for your reply!
    I construct the link by looking the document provided by Oracle.
    http://download.oracle.com/docs/cd/E14571_01/bi.1111/e16364/ebs_actions.htm#CJAFDEIB
    In this document I followed the step to make database object and connection pool, set up
    authentication and modify xml files. Then I thought I could use BI Action Navigate to EBS,
    but it didn't work, then I asked coworkers and I've told to do "5.3 Embedding Links to Oracle Business Intelligence in Oracle E-Business Suite" in this document.
    At first I thought I need not do this setting because I would like to make action navigate from BI to EBS,
    not from EBS to BI.
    Although I managed to embed link to BI in EBS, it still doen't work.(but the connection from EBS to BI was successful)
    And I tried to verify BI and EBS are in same domain, but I have no idea how to verify.
    Could you please give me the way to check it?
    Sincerely,
    Yuchi
    Edited by: yuchi on 2011/01/04 18:58

  • How can I make a photo from two merged projects available for a book that I started using one project ? They merge but the book only allows me to access the original project photos even though the merged photos can be seen in the project ?

    I have successfully merged two projects in order to add new photos for my book.  The library available to the book which has 26 completed pages accesses only the original project library.  Has anyone else had this problem ?  It is frustrating to see the photos I want in the merged project file, but to have only the original photos when I started the book available in the book library.

    That will work, but it is the long way 'round.
    As Frank noted, Book Albums are just specialized Albums.  Albums can show any Image in your Library, regardless of where the Album is located on the Library Inspector, and regardless of which Project contains the Image.  You can put your Albums anywhere (in a Folder called "Books" for example).  You can put Images from anywhere in your Library in any Album.
    The easy way 'round:
    - Make a new Book Album
    - Select Images you may want to put in your Book.  Flag them.
    - Select some more.  Flag them.
    - Go to the "Flagged" container (listed near the top of the Library Inspector), select all, and drag-and-drop them to your Book Album.
    - Repeat as needed, or just drag-and-drop directly into the Book Album.
    Note that you can remove any Image from any Album (including Books) by selecting and hitting the "{Delete}" key.  This _does not remove the Image from the Project that contains it, or from the Library.
    Note, too, that once the Images are in your Book Album, you then put them in the Book you are creating for publication.  The Book Album contains the superset of Images with which you populate the Book itself.  The Book Album also holds the Book.
    A good (imho ) introduction to the parts of Aperture can be found in this short guide I wrote.
    The User Manual is helpful.  Here is
    the chapter on making Books. 
    From that chapter, here is
    the section detailing how to create and populate a Book Album.

  • How can i make a linking column in a report

    I basically want to add a column to the end of my reprot that contains the test more info and then make this linkable for the attrubuites of that particualr row.
    I know how to make a column linkable and how to link it to the id of the row, all i need to know is how to add a row to the report conitaning the same value for each row like a default row or something?
    Any one any ideas
    Thanks
    Dan Stead

    Thanks i have done this to add a clumn link and put all the links in correctly the thing i am having trouble is where to put the word "more Info" so that this is then displayed in the column and linkable.
    I have tried putting this in HTML Expression [Insert column value] but this only shows the word more info the link doesnt work.
    Any one any ideas?
    thanks
    Dan Stead

  • How can I make a link a different color than the other links according to the current page?

    Hello.  I have created a navigation bar.  And I would like to style the links to have the current page link a different color than the other links.  For example, if all of the links have a black background, I would like to have the current page link to have a white background.  The reason that I would like to style them this way is so that the visitor knows what page is being visitied.
    I tried different ways but all of them did not show to make any change to the links.  This is what I have so far.  The links work, but all of them have the same color and background.  When on the home page, I would like to have the home page link to have a white background with black letters.  I would appreciate your advice.
    <head>
    ul {
        list-style-type: none;
        text-align: right;
        padding-top: 10px;
        padding-bottom: 6px;
        padding-right: 10px;
    li {
        display: inline;
    a:link {
        color: #FFF;
        background-color: #000;
        text-align: center;
        padding-top: 8px;
        padding-right: 8px;
        padding-bottom: 8px;
        padding-left: 7px;
        text-decoration: none;
    a:visited {
        color: #FFF;
        background-color: #000;
        text-decoration: none;
    a:hover {
        color: #000;
        background-color: #FFF;
        text-decoration: none;   
    a:active {
        color: #FFF;
        background-color: #000;
        text-decoration: none;   
    a.menu:link {
         color: #000   
         background-color: #FFF;
         text-decoration: none;
    </head>
    <body>
    <div class="navigation">
        <ul>
            <li class="menu"><a href="index.html" target="_self">HOME</a></li>
    </body>
    Thank you very much.

    http://www.itworld.com/development/351097/setting-active-menu-item-based-current-url-jquer y

  • How can i make my macbook my main I tunes computer, I am wanting to get rid of an old one that holds all the songs and video's

    I am getting rid of an old computer biut want to transfer all music to my macbook...my music is abouy 90gb in total...

    How to use Migration Assistant to transfer files from another Mac

  • After I slide to power off my 3GS iphone I can't on it back again. The apple logo come on and th3en off. If I connect to the power the apple logo comes on and then it open up with 70% power. I have used itune to restore my iphone recently. How can I make

    After I slide to power off my iphone 3GS it would not turn on again.Only the apple logo comes on and then it is off. If I connect to the power the apple logo comes
    and then it comes on . I have just used itunes to restore my iphone. How can I make my iphone work again?

    Keep using it untill it powers off, then charge it to full to re-calibrate the battery.
    If problem persist, maybe your battery needs to be replaced.

  • My sister and I share an itunes account so she can click on my email and receive my imessages how can I make sure this stops happening?

    My sister and I share an itunes account so she can click on my email and receive my imessages how can I make sure this stops happening?

    One of you needs to use a separate Apple ID for iCloud, FaceTime & iMessage.
    The Apple ID needs to be a verified email address. Once you have an email address, that can be verified, go here & create the ID:
    https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/wa/createAppleId
    Then on one of the phones, turn off Contacts, Calendars, etc. for iCloud. You'll be prompted to keep the data or delete it from the phone, then turn off iMessage, FaceTime & delete the iCloud account...Settings>iCloud...scroll down...delete account. Then, setup iCloud using the new Apple ID, turn on iMessage & Facetime.
    This will have no affect on the ID you both share for iTunes content, & you can continue to do so.

  • How can I make a weekly 'to do' list?  I don't want the list associated with a particular date and time; just a list of things to get done!

    How can I make a weekly 'to do' list? I don't want it associated with a particular day or or time, just the week, preferably with the ability to check off or remove when done.

    Thank you for the excellent reference Peddi. I had played with the OAMessageChoiceBean component yesterday, but I was able to tell from your instructions that "Picklist Display Attribute" and "Picklist Value Attribute" really are not for binding to the database EO. That was the key piece of information that had me confused.
    In addition to adding the messageChoice component to the page, I needed to write some code to synchronize the picklist value with the corresponding code value, which I placed in am OAFormValueBean (hidden form field) which I could then bind to my application's database EO in the controller, running in the processFormRequest procedure:
    /** Synchronize the catalog code with the selected catalog name */
    protected void syncCatalogValues(OAPageContext pageContext,
    OAWebBean webBean, MyApplicationAMImpl am) {   
    OAMessageChoiceBean mcb =
    (OAMessageChoiceBean) webBean.findChildRecursive("CatalogName");
    OAFormValueBean cc =
    (OAFormValueBean) webBean.findChildRecursive("CatalogCode");
    String catalogDescription = mcb.getText(pageContext);
    if (catalogDescription != null) {
    String catalogCode = am.getCatalogCode(catalogDescription);
    cc.setValue(pageContext, catalogCode);
    Along with a little code to get the catalogCode value from the LOVVO, that's all it took.
    Thanks again. This was a great help.
    Pete

Maybe you are looking for

  • PO order history report

    Dear SAP Gurus, My client has a requirement below. When a purchase order quantity/dates changes is there a report in MM that shows the PO order history report. I have tried ME2N/ ME80FN. It does not show me the results what I am looking for. For exam

  • AA3 library of audio clips and saving session

    Either I have lost my mind, or I've changed a setting somehow, or I'm just now noticing something that may have been this way forever. I could swear if you have 5 audio clips in your library and only 3 in the multi-track, when you save the session, a

  • Problems with GCC version - compiling OpenOffice

    I am trying to compile OpenOffice 4.1.1 to run on 10.6.8. When I run the ./configure it runs for a few seconds then shows the following error: "checking the GNU gcc compiler version... configure: error: found version "1.0.2", use version 3+ of the gc

  • Strange email content received when test email mailer on RedHat 3 -- HELP

    Hi, Please have a look at the two email contents below, they are sent by java mailer when I click the test mailer button in workflow manager, and they are actually the same message, but one of which has full content, the other doesn't seem to like pi

  • FCP won't start up at all...

    Hey there. I'm having a real problem with FCP at the moment. It all began when I installed some new effects plug in's. It ran fine for about a week, then FCP suddenly kept shutting itself down. I'd double click on the application icon, then it'd tell