How can I make the stage height shorter by "cropping out" the bottom portion of the stage?

Right now my stage dimensions are 980 X 800 px.  I need to cut or "crop out" the bottom portion of the footer because its height is too long.  So I changed the stage dimensions to 980 X 600 px (and changed the corresponding dimensions in the embed tag in the index.html file to match).  Doing this seems to cut out the bottom but at the same time adds space to the top and seems to distort the overall spacing.  Is there a simple way to crop out the bottom of the stage (just like cropping out a section of a photo)?

Forgetting about the html file and embed tag for now, I can't seem to get the .swf proportioned properly in the first place.  I just want the bottom portion of the stage cropped out.  How do I do that without distorting the spacing?  When I tried to reduce the stage height, it doesn't simply crop out the bottom - it reduces the stage's height but it also seems to add space to the top and "squeezes" lines together, distorting the vertical spacing.
Is there a way to simply crop out the bottom, just like cropping an image?

Similar Messages

  • How can I make a 1-Click short cut for a specific tool in Adobe Acrobat 9 Pro?

    How can I make a 1-Click short cut for Adobe Acrobat 9 Pro for the function "Create" > "PDF from Scanner" > "Black & White Document"?

    No, Acrobat can't do that.

  • In snow leopard, 2 fingers to the left on the mouse went back to the previous page. In Lion, it opens the dashboard. How can i make firefox go back to previous page with two fingers left on the mouse??

    In snow leopard, 2 fingers to the left on the mouse went back to the previous page. In Lion, it opens the dashboard. How can i make firefox go back to previous page with two fingers left on the mouse??

    Hi,
    I don't know of a preference, but have you used ⌘-T in iCal?
    Best wishes
    John M

  • How can I make word document window bigger. Have tried dragging bottom corner out & clicking on '+' sign but this does nothing?

    How can I make word document window bigger. Have tried dragging bottom corner out & clicking on '+' sign but this does nothing?

    Word - Microsoft Support

  • When I have many tabs open, & I am viewing the 1st one in the row of tabs, how can I make ctrl+T open tab next to it instead of down at the end of all the tabs?

    If, for example, I have 50 tabs open, and I happen to be working on the very first tab out of the long row of tabs (tab #1 out of 50 total tabs)....if I suddenly need a new tab next to the one I'm on so that I can do something else related to what I am doing on my current tab's website, pushing ctrl+t opens up the new tab clear down at the very end of the long row of tabs (i.e., the new tab would be tab #51). How can I make the new tab open up right beside the one I'm working on at the moment?

    You would need an extension to achieve this
    You can look at this extension:
    *Tab Utilities Lite: https://addons.mozilla.org/firefox/addon/tab-utilities-lite/

  • How can i make a graph y is unmber pasing from UDP port,x is the time stamp.and in the same time this graph can display several numbers to compare.

    how can i make a graph
    y is number(the blue wire)pasing from UDP port,
    x is the time stamp.
    plus in the same time this graph can display several differenr numbers to compare.

  • Hello. How can I make it so firefox remembers which links I've visited as on the music singles pages for longer periods of time and more links?

    I frequently use the singles pages on wikipedia, for example: http://en.wikipedia.org/w/index.php?title=Category:2012_singles&from=D
    So I had already clicked on the links some months ago on the 2012 singles pages, but firefox forgot that I had clicked on the links there. How can I make it so it remembers for longer periods of time without causing problems to firefox? Also, I want it to remember what links I've clicked on the 2013 singles pages, because I am also keeping up with that. Can I tell firefox to remember all history for these pages, such as 2012 singles, or 2013 singles specifically? I just want firefox to remember what links I've visited, as in, the songs in the 2012/2013 singles pages, and not forget those, because I have already downloaded those so I want firefox to keep track. What are my options? Please let me know, and I hope you understand the problem I am describing.

    My Firefox remembers history from over a year ago, and unless you are using a setting or external tool to clear it, or load huge numbers of pages/download huge numbers of files, Firefox should pretty easily remember links you've accessed in recent months.
    To see what Firefox has computed as the number of URLs to remember, you can check here:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''.hist''' and pause while the list is filtered
    (3) Look for '''places.history.expiration.transient_current_max_pages'''
    Mine's set to 104858. I don't know how that was determined.

  • How can I make iMessage work on 2 iPhones with 2 different phone numbers using the same Apple ID?

    My work requires me to split time between two countries (Ph and Bn). I had an iPhone 4 with a Ph number and a Nokia for the Bn number. iMessage was running on the iPhone 4 with the Ph number and my apple ID. I recently replaced the Nokia with an iPhone 5 which I set up using the iCloud back up of my iPhone 4. I cant seem to set up iMessage (and Facetime) the way I want it to work on the iPhone 5. Im not sure if iOS 6 would allow me to do this so I'm throwing this out to the forums to check if its possible.
    iPhone 4 w/ iOS 6
    - uses Ph sim card
    - Ph number set in Phone>My Number
    - iMessage>Send & Receive has the following data
    Ph Number - greyed outand checked
    Apple User ID - checked
    iPhone 5 w/ iOS 6
    - uses Bn sim card
    - Bn number set in Phone>My Number
    - iMessage>Send & Receive has the following data
    Ph number greyed out and not checked
    Same Ph number checked
    Apple User ID checked
    Ive tried turning on/off my iPhone 5 and logging on and off iMessage but I cant seem to get it to update the iMessage phone number to the Bn number. Any idea how I can do this?

    I believe because you migrated from a Nokia to an iPhone you need to register the Bn phone number with your Apple ID so it can be used for iMessage. The Pn number seems to be the only one registered
    Go here > https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
    Manage your Apple ID and see if that does the trick
    Hope that helps

  • How can I make addons available for enterprise users by an central service and forbid the installation from any other sources

    in the company I´m working for it´s not possible to install add-ons by the Users . That´s what I´m going to change.
    We use Firefox ESR 17 and Window 7.
    I want to make add-ons available for everybody by integrating an internal central service. That is possible by customizing the "extension.webservice.discoverURL" to the server I´m talking about. The Problem is that nobody should be able to install add-ons from any other source, for example addons.mozilla.org, local media,...
    Do you have an idea, how this problem can be solved?
    Maybe there is a possibility by using the lockPref "xpiinstall.enabled false" in conjunction with a whitelist defining my Server?

    Does any of this or similar blogs by the same author help
    *http://mike.kaply.com/2012/07/03/customizing-firefox-blocking-add-ons/
    Although with many hacks there could be some sort of workaround that advanced users may employ when attempting to circumvent the measures, such as the ability to use Firefox in safe-mode and then install add-ons, or even run a browser from a memory stick.
    You may well get a better answer on some other forum. This mozillazine forum deals with some coding issues, not sure but they may consider your sort of question on topic.
    * http://forums.mozillazine.org/viewforum.php?f=25

  • How can I make and wire reffercence signals(ramp,sine,square) to excite and evaluate the behaviour of the system wih PID control?

    Dear all,
    I am Tri, I am a beginer with LV program. Actually I used LV for my reasearch, I had tried wiht very simple thing but the problem arise because I am not familiar with LA. Why I know that problem is simple because I compare with MatLab that I had somtime used before.
    I make a loop of PID control, It worked properly but I don't know how to make a refference signal to wire to the loop for excitating to evaluate the behaviour of the system. Please give me your help.
    Thanks

    Hi Tri,
          I've employed the "simple PID.vi" without a problem, but your example is more complex.  I think you use a Function generator to modulate DAQ inputs?
    Perhaps someone else will be able to infer your intention and identify a flaw in the logic.
    In case someone else wants to run your VI, it may help to build/attach an .llb (some sub-VIs are needed by the VI you atached.)
    To build the .llb, save your VI with Development Distribution options (Alt-F,Alt-W) and attach the .LLB
    1) \File\Save with Options
    2) select Development Distribution
    3) Save
    4) choose "New VI Library"
    But first, It would be helpful to us if you clean-up the code - straighten wire-paths, minimize bends in wires, and try to avoid "tall" diagrams.  Scrolling diagrams up and down is "bad form".  If scrolling is necessary, left&right is preferrable!
    Cheers.
    (and, for the record: in my previous post, Exitation would be wired to "Process Variable", Not "Set Point" (ouch!))
    When they give imbeciles handicap-parking, I won't have so far to walk!

  • How can I make a control inside a loop in a subVI change value when the calling VI's control changes?

    Hi.
    I think this is a pretty basic LV question, but I have not been able to find a good solution.
    I am attaching VIs that show the problem I am having, but obviously, the real application is a lot complicated, which forces me to try to do it this way.
    The issue is: I have a subVI with a Boolean control inside a loop.  When the control is true I want some action to take place.  When the subVI is run on its own, it works fine, acting properly when I set the boolean control to true via the LV FPGA interface from the host.  However, when I use it as a subVI, in which the top-level VI calls several instances of the subVI, I have the Boolean controls in the top level VI.  What is happening is that the false Boolean value with which the top-level VI starts is passed into the subVIs, and not updated, even though the control is inside the loop.
    Can any one suggest a good solution?
    Thanks,
    AlejandroZ
    Attachments:
    CallingVI.vi ‏7 KB
    subVI.vi ‏8 KB

    Hi.
    I know the example I posted might seem silly, but it was just to illustrate the problem I am having.  In reality this is the application:
    I have some LV FPGA code which uses a few FPGA IO to implement a serial link to communicate with a device.  Most of the time we are getting data from the device, so the serial link is used to send a read command, read in the data and put it into a FIFO.  However, I also wanted the VI to support sending data to the device, so I added an array control to put the data you want to send, and a boolean control to tell it you want to send it.
    Since sending and receiving data are done using the same FPGA IO, they cannot be independent operations, because they would garble each other. Therefore, in the subVI I have a loop in which I first read data if there is any to read, then check the boolean write control to see if there is data to write.
    As I mentioned, this works perfectly for talking to a single device.  However, we run into the issue of this topic when trying to replicate this for several devices.
    One easy solution is to not have the loop in the subVI, and have it in the calling VI (I am favoring this simple solution right now).  The only reason why I have not done this yet, is that the subVI has more than one loop, so I am going to have to create several subVIs.  I just posted to see if there was an even simpler solution...
    There have been some other possibly good solutions proposed here, though I am not sure if they work in LV FPGA.
    Thanks for all your responses.
    AlejandroZ

  • How can we make one view field value to be copied to other field of the the

    Hi   
       I am new  in CRM2007 I have enhanced sap component & enhanced SAP View but I wanted the field value of the enhanced view to be mapped to the field value of the same view which is added from EEWB
    Pls tell me if the added new field can be made as Dropdown list box without fixed values & Design Layer customizing I mean to say through coding can we made the input field as Dropdown
    Appreciate any help in advance
    Thanks
    Neel

    Hi,
    You can write your own ligic in GET_V_<FIELD> method. Select the values which needs to be displayed in the drop down list based on your own condition. Some sample code is given below:
    METHOD get_v_zzverksomr.
      DATA: lt_ddlb           TYPE bsp_wd_dropdown_table,
              ls_ddlb           TYPE bsp_wd_dropdown_line,
              lv_display_only   TYPE string,
              gr_ddlb_verksomr  type ref to CL_CRM_UIU_DDLB,
              ls_verksomr_values  TYPE LINE OF vrm_values.
        SELECT verksomr verksomrtxt FROM zkb_verks
           INTO TABLE lt_ddlb.
        IF sy-subrc EQ 0.
          INSERT INITIAL LINE INTO lt_ddlb INDEX 1.
        ENDIF.
      IF gr_ddlb_verksomr IS NOT BOUND.
        FREE gr_ddlb_verksomr.
        CREATE OBJECT gr_ddlb_verksomr
          EXPORTING
            iv_source_type = 'T'.
        LOOP AT gt_verksomr_values INTO ls_verksomr_values.
          ls_ddlb-key   = ls_verksomr_values-key.
          ls_ddlb-value = ls_verksomr_values-text.
          APPEND ls_ddlb TO lt_ddlb.
        ENDLOOP.
        gr_ddlb_verksomr->set_selection_table( it_selection_table = lt_ddlb ).
      ENDIF.
      rv_valuehelp_descriptor = gr_ddlb_verksomr.
    ENDMETHOD.
    Thanks
    Swagatika

  • How can I make Firefox display Bookmarks tab instead of Top Sites when I touch the address bar?

    I am using Firefox on HTC One. When I touch the address bar, I want to be able to see the Bookmarks tab instead of Top Sites. By default, it always goes to Top Sites. Is there a setting that I can change, or change the order of the tabs? Thank you

    Hi:
    Unfortunately you cannot remove the top sites homepage but you can pin a site, remove a site by unpinning it and edit a pinned site's url.
    Please read [[Pin Sites on the Firefox for Android start screen|this article]] for instructions.
    Hope this helps!

  • I purchased an AAXA tech. p1jr and was wondering, How can I make it project my ipod 3rd gen out?

    Here is the description on the auction: http://i.imgur.com/kydpt4G.jpg
    Here is an album of everything I've received, could anyone tell me if I have everything to get going? Am I missing something? This is for an ipod 3rd gen. I think I might be able to do it, or I'm just missing 1 piece?
    Album here of EVERYTHING I got, and close ups of inputs: http://imgur.com/a/3hd9p
    Any help would be AWESOME!

    bump

  • How can I make that the cursor of a table ...

    Hello,
    how can I make that the cursor of a table (on the frontpanel) go to the starting position? I have placed a table that give back the number of the row if I doubleclick a row on the frontpanel, but when I restart the vi the cursor of the table is on this position. If I have many informations in the table and after restarting there are just one or two, I can`t see this information without scrolling to the top of the table. I want that the cursor (that I see) is at the first row. How can I make it?
    thankyou
    Schwede

    Hello,
    Sorry, I forgot to attach it in the previous post.
    Regards,
    Paulo
    Attachments:
    EditPos.vi ‏16 KB

Maybe you are looking for