How can I make the web server work on port 80 and not 443. I can only access my website using https.
On a Mac Mini server with OS X Lion 10.7.2, I am unalbe to get the web server working on port 80. It switches automatically to port 443 (https).
This situation complicates the access to FileMaker Web publishing, as I don't want my clients having to use https.
How can I change that? Does anyone know?
Thanks for any reply
in the server: I checked the SSL certificate. Tried several configuration.
Well, that's a problem for a start.
Your port 80 connection should NOT use SSL. Port 80 is the standard HTTP port, not HTTPS and most applications that connect to port 80 will not expect to use SSL
If you want to run a site under both HTTP and HTTPS then you create two sites, one on port 80 without SSL and one on port 443 with SSL
Similar Messages
-
How do you make OS X Lion work with excel and word? I have these programs that I use for work?
I up loaded Lion...now windows word and excle dont work. I use these for work. How do i get them to work with Lion.
jbeustis wrote:
I up loaded Lion...now windows word and excle dont work. I use these for work. How do i get them to work with Lion.
Upadte to the current version of Office, 2011 -
I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?
I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck! -
My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
How can I make the editor photoshop work
how can I make the editor photoshop work? it can not work at all.
please help me . thanksYou need to tell us at least what program you are referring to and some system info...
Mylenium -
How do I get Apache web server working ...
How do I get Apache web server working on my MacBook Pro, which is running Leopard 10.5.8?
When I enter 'http://localhost/~username/' (without the quote marks) as a URL in my Firefox browser on the MacBook, I do not see any result at all(!). I do have Web Sharing on in System Preferences on that machine. But the browser does nothing whatever for that URL ...
On my other computer, an iMac running Leopard 10.5.8, when I enter 'http://localhost/~username/' I see the default "Your Website Here" page. That same default page is in fact the index.html file I expect to see on the MacBook Pro. But it isn't getting invoked for some reason. Nothing is happening ...
When on the iMac I try 'http://10.0.1.18/~username/' (10.0.1.18 is the local IP address I see under 'Web Sharing: On' on the MacBook) I get "Unable to connect: Firefox can't establish a connection to the server at 10.0.1.18."
When on the MacBook I try 'http://10.0.1.5/~username/' (10.0.1.5 is the local IP address I see under 'Web Sharing: On' on the MacBook) I see the default "Your Website Here" page.
It is the same on my iPhone: Using the same local IP addresses and usernames, Safari can see the index.html page on my iMac but not on my MacBook.
It looks as if Apache is not working on the MacBook, while on the iMac it works fine.
On the MacBook I can see (after I use 'defaults write com.apple.finder AppleShowAllFiles TRUE' in Terminal) a /private/etc/apache2/ directory with what look to be(?) the usual contents. So it looks like Apache is duly installed, as far as I can tell.
On the MacBook I don't see a file at /private/var/log/apache2/error_log, which is the location for 'ErrorLog' given in the httpd.conf file.
That about exhausts my understanding of how to get a handle on my problem.
Any advice or suggestions from those who have more expertise with Apache will be much appreciated ...Okai, so we are getting somewhere, but not quit there yet :-)
I opened the Kenneth.conf file using the command: vi Kenneth.conf
This is what it said:
<Directory "/Users/Kenneth/Sites/">
Options Indexes Multiviews
AllowOverride AuthConfig Limit
Order allow,deny
Allow from all
</Directory>
"Kenneth.conf" [readonly] 6L, 139C
I therefore changed the AllowOverride from AuthConfig Limit to None, which was the only difference from what you posted above. Something did change, when I tried to open XAMPP it prompted me a password, but Apache still wont start :-/ -
How to make the mobile application work with firewall and anti-virus ON
Hi,
I keep on receiving internal processing error when i try to login sap mobile solution 1.3.0 on my ipad and i was provided a solution, that is to turn off my firewall and antivirus. I works by turn off both of it but i cant possible turn of the firewall and antivirus on the server.
Can anyone guide me how to make the mobile application work with firewall and anti-virus ON
Thank youDear Rajesh,
Create a policy in your fire wall to allow the port to send and receive data.
I believe the port for the mobile should be port 8080 and 8443.
And your license server port 30000 and 30001
nd.Q -
Been using Firefox (many years) version 3.16.. Received invitation to download Firefox version 4 for Mac this morning and did so (regretably losing 3.16 version) because now the new version 4 won't open. I just keep getting the error message "You can't open the application "Firefox.app" because it is not supported by this architecture." I'm using the latest Mac OS 10.5.8. The processor is 1.8 GHz Power PC G5.
I trashed the first download and downloaded a 2nd Firefox version 4 and had the same results.Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com -
Can't SEND email from Telus account in Alberta, Canada, unless I go to web mail. Does anyone know how to set up the Outgoing server? Incoming is fine. Outgoing used to work. We changed it when we went to another location, and can't get it back. Telus support can't fix it. Neither smtp.telus.net NOR mail.telus.net works for Outgoing server to send mail. Please help! Thanks.
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
How do I make the line tool work again?
Can you help me make the line tool operate properly again? I just now accidentally touched something on my keyboard. And now, when I click on the Line Tool in the Tools Panel, and then press the "x" key to toggle the color of the line tool between being black, or being white, neither options works anymore. Now, when I draw a line, it does not apply a black line to my drawing. And when I toggle and press the "x" key again, it doesn"t apply a white line to the drawing either. When the line tool is "white", and I draw a line across a black area, nothing happens. The white line tool doesn't apply to the drawing.
When I've gone to your "help" menu, I'm instructed to press the "Object Drawing Button" in the "Tool Panel". But I've looked at every item in the "Tool Panel" and I cannot find the "Object Drawing Button"..
Can you give me the steps that will help me make the line tool work once again?
Thanks, Mardty Anderson
(520) 975-8547Thank you for taking your time to respond. I'm using Adobe Photoshop
Elements 11.
A colleague was able to get the problem solved. He chose the "star"
instead of the line. The star worked fine and showed up on the drawing
I'm working on. Then he switched back to the "line". Lo and belold, the
line worked. It's been working fine ever since. Maybe it was a bug in
the program?
Do you know how to use the Picture Organizer in this Photoshop program?
I have several thousand illustrations. The Organizer seems to recognize
some of them (like 5 or 6). But most all of them only appear as a blue
box with a flower design in it. When I click on the blue box, more
pictures appear, but only very quickly does a picture flash up on the
screen, and then it disappears again.
I wish there was a tutor here in the Tucson, Arizona area that I could
hire who could come to our office and coach me. There are several of us
who don't understand this Photo Organizer. Do you know of any leads in
which we could hire a personal tutor for a morning?
Thanks again for your kind response to my first call for help, (Miss)
Mardty Anderson -
How do you failover the web server?
I have 2 servers running the web server on them. If one of them fails how do I reroute the users requests to the other one, seamlessly to the user? I am new to using the web server so any help, even remedial would help!! Thanks!
Ya, thats part of the problem. Right now we are using Sun Cluster to provide a network resource that handles which web server is to handle the request. A virtual ip address so to speak. We'd like to stop using Sun Cluster as it's a bit unstable, ie reboots the cluster randomly without error messages or warnings. We'd like to just use the web server/application server clustering capabilities and eleviate the extra layer of complexity with Sun Cluster. I know Sun Cluster has a Web Server agent to do this, but that is why we're trying to not go down that road. It is starting to sound like we may have to though as buying additional hardware isn't an option.
-
How do you make the 'places' function work in iphoto
`i have just imported a lot of old photos from my 2007 macbook onto a new macbook pro with ilife 09. `i am trying to make the places function work but can't get it to work. The 'i' icon does not appear in the bottom right hand corner of the events main photo as it's supposed too. Any suggestions?
Simply open an event; select 1 or more photos and select the i in the lower right corner of a photo thumbnail. You will get the Geocoding window. Start typing the address/place/country in the location area. For detailed addresses you select new place. You can resize the window. Maps from google appears and you select the place it finds. You can even drag the pin to a specific area. Press ok and your done.
-
Why I can't make the web camera run?
when i use the connect pro, in the classroom I can't make my web camera running. I alredy install FMS and opened port 1935. what can I do else?
oh recently I answer your by my e-mail account. so i plus the pic in a mail.
maybe i should plus a pic in the bbs. that will be monday in beijing. -
Dear all.
I currently have a WIFI-network established by a Time Capsule. I want to use my Airport Express as WIFI-receiver for my Samsung TV. How do I pair them up so that the 10/100BASE-T ethernet port works as a LAN-port? I used to do it by setting it up as WDS but I understand this is not suitable for a "n" network.
Thx.Under the wireless settings for the TIme Capsule, make sure that there is a check mark next to "Allow this network to be extended"
Then configure the AirPort Express to "Extend a wireless network". The Ethernet port on the Express is automatically enabled in this type of configuration and the AirPort Express will also provide more wireless coverage in the area where it is located.
See Apple's instructions in the link below. The iilustration shown in the support document shows an AirPort Extreme as the extending device, but the setup for the AirPort Express would be exactly the same
http://support.apple.com/kb/HT4259 -
How can I make the ${foo} syntax work?
Hello,
I have a jsp page and I am using Webwork with the action class exposing beans to the ognl value stack.
Should I be able to write ${foo} with JSTL? I get the expected value if I write <c:out value="${foo}"/> I do get the expected value.
The real reason I am asking is because I am trying to use a custom taglib and the parameters are not being evaluated. For example, ${accounts} should represent a collection and when I use <input:selectBox options="${accounts}"/> - the actual string "${accounts}" is passed to the tag. I would really appreciate some help. Thank you very much.
I am using apache-tomcat 4.1.39 with jakarta-taglibs-standard-1.0.6 for the JSTL implementation. Thank you very much for any help you might be able to offer.
Regards,
JoeThank you very much for the response... that makes a lot of sense. I still have 1 question though... this is the strange part;
The standard JSTL taglibs seem to be able to handle the ${} syntax yet I am also working with a custom taglib that does not seem to have the tags parsed. If you can help me fix this, I would be extremely grateful...
This works fine:
<c:forEach items="${accounts}" var="account">
<c:out value="${account.accountNumber}"/>
</c:forEach>
But, when using the custom taglib:
<input:selectBox options="${accounts}"/>
the options value in the tag class is actually "${accounts}" and no the list which ${accounts} represents. Do you have any idea as to why this would occur? Here is the tld (snipped to show the parts I am referring to)
<tag>
<name>selectBox</name>
<tag-class>example.SelectBoxTag</tag-class>
<body-content>JSP</body-content>
<display-name>selectBox</display-name>
<attribute>
<name>options</name>
<required>false</required>
<rtexprvalue>true</rtexprvalue>
<type>java.lang.Object</type>
<description>Any collection of elements to be added to select list</description>
</attribute>
</tag>
thank you very much.
Joe
Maybe you are looking for
-
How do I represent the apostrophe char in java? ''' doesn't work and ...
case '\u0027':doesn't either. what is the representation like: 'h' is h
-
Hi All, I need to report changes in employee vendor's personal details. That is, His name change (if any) address change bank information change where can i find these details Can anyone please suggest how can i do this? Thanks
-
Can't set settings or personalize HP Pavillion 20 Desktop, Windows 8 & Office 2013
HP Pavillion 20 running Windows 8 has several significant problems that need fixing: (1) system doesn't recognize DVD Drive despite it being clearly acknowledged in Computer; (2) Ditto User Account settings includin Administrator--cannot Refresh wit
-
I have a 7th generation ipod nano that is not showing in the itunes window? how do i change that?
-
Hi OBI Gurus , We are using prebuilt OBI rpd for demo to client. In that for the subject area named 'Sales - Orders, Backlog and Invoices' for the Fact - Sales Backlog Lines and for the column Financial Backlog Amount we are getting the problem in th