How can I midi Roland TD-9 KX2 with Logic EXpress 9?

Hello everyone,
Here is my setup:
I have the Roland TD-9 KX2 connected to M-Audio MIDI In & Out and Audio 1/4" In & Out, Then connected to Logic 9 thru USB on my MacBook Pro.
I create a new track and select Audio and then I create another track and this time I choose External.
When I hit record, the audio track shows waveform recorded but the External/MIDI does not.
Note: When I'm recording, I can see the MIDI notes (look like little blocks), but when I stop recording, They disappear...
Can someone please tell me how I can execute this or of if anyone has a tutorial that they can share link of it.
Thanks in advance,

I had a simular problem. Only I had Ver 9 and needed 9.1.4 to be compatable with Lion. I had installed Lion and didn't think I would have any problem with Apple apps. Not the case with Logic Express. Here is what I did.
First: I removed all versions that were previously installed on my Mac Pro. Then using the latest (9.0) I reinstalled. Important. DO NOT TRY TO OPEN APP. Next: down load (free) version 9.1.4 and install. Once everything is closed and disks are removed. Start Logic Express 9.1.4 and guess what...if just works.
I believe some of the residual files were residing in my library some place and I didn't see them. Before I reinstalled I was recieving the message that I didn't have a qualifing version of Logic Express. This is when I had two versions 9.0.0 and 9.0.1. Someone said to remove the older version, I didn and nothing.
Do what I say above and you will be rewarded.
Good Luck

Similar Messages

How can I route my audio interface inputs to Logic Express inputs?

Hello,
Logic Express can 12 inputs to record audio on.... fair enough.
My MOTU Traveler, together with ADAT connected Mackie Onyx 800F have 16 inputs...
How can I use the first 4 inputs (XLR) together with the last 8 input (ADAT)
Logic only seems to count from 1 to 12!
(After reading the manual, It seemed to be solved by making new Audio Input Objects in the Environment, but unfortunately these objects where removed from Logic Express)
Does anybody have the solution?
Thanks a lot.
Greetings,
Mark

Hi Michael, thanks a lot!
Unfortunately it didn't solve my problem yet. I tried
the audio/midi utility and found that the inputs
can't be turned off. Is there not a environment patch
possible, that I can load that puts the inputs in the
right order? I hope so!
Greetz,
Mark
The Environment doesn't route audio; it routes MIDI. There are audio objects IN the Environment, but you can't shuttle audio around like that.
You have to remember that LE is an entry-level piece of software. You might think Garageband is entry level, and I think it should be, but in reality, LE is VERY crippled. Don't get me wrong, I'm not ragging on Logic as a program; I think Logic is great. But Apple has made some poor choices with respect to the features of LP that get crippled in LE.
Sorry to digress from your original topic, but I think this is a bigger issue. The difference in price between LP and LE is enormous. That difference should be due to the fact that LP has plugs and effects (and other fairly esoteric features, like surround mixing, that most people don't need), and that justifies the price difference. Remember, when Emagic sold Logic (pre-Logic Pro 6), those effects and instruments cost a LOT more than the difference between LP and LE. LP is really a steal for what you get. LE is a poor substitute.
Seriously, LE is a lot less than just a lite version of LP; it's crippled by things like the 12 input/output thing (what is the point?), the useless Auxes, and numerous other little things that keep it from really competing with other 'lite' sequencers like Cubase SL or Audiodesk.
Anyway, I think the answer to your question is, if you need to record more than 12 simultaneous tracks, or you need flexibility in accessing your hardware's inputs and outputs, you need a better program.
Fortunately, the upgrade cost to LP isn't that much, nor is the crossgrade to Digital Performer...

How can I make firefox my internet connection with Outlook Express

My outlook express currently shares my internet connection settings with Internet Explorer. I want it to share with firefox but don't know how to make that happen.

Hi kentbull, this is a little confusing...
You and your wife have separate Windows accounts, or do you share a single Windows account and just have separate email accounts?
Outlook Express -- the stand-alone email program shipped with Windows XP -- doesn't depend on Firefox except if you click a link in a message in OE, it will open in your default browser, which may be Firefox. Really should not be a problem to open/close Outlook Express whether Firefox is open/closed/installed/missing.
If you have switched to Outlook.com, the latest iteration of Hotmail, the situation may be different. If you are sharing a single Windows account, then you most likely are sharing Firefox and Microsoft probably does not let you be in two accounts at the same time in one Firefox session without logging out of one account and then into the other.

How can i connect my mac book pro with retina display 2014 Mid to 5.1 channel? what is the connector am i to use? i wonder if anybody could probably let me know?

how can i connect my mac book pro with retina display 2014 Mid to 5.1 channel? what is the connector am i to use? i wonder if anybody could probably let me know?

https://www.youtube.com/watch?v=72l_FLsXNAg
I use Hercules found here http://www.hercules.com/us/Sound-Cards/bdd/p/123/gamesurround-muse-xl-pocket-lt3 /
also read this helpful thread Outputting 5.1 Channel Surround Sound from your Mac

How can I connect my 3gen apple tv with HDMI to my bush LCD32TV022HD which does not have an HDMI port but does have 1)S-Video I/P, 2)Video I/P, 3) L

How can I connect my 3gen apple tv with HDMI to my BUSH LCD32TV022HD
This does not have an HDMI port but does have:-
1) S-Video I/P,
2) Video I/P,
3) Audio Input (Left & Right)
4) Audio In jack (for VGA and DVI source)
5) DVI input
6) VGA input

Welcome to the Apple community.
The Apple TV doesn't officially support a DVI connection, however you may be able to get it to work. You will first need to check that your TV supports either 720p or 1080p as well as HDCP. If you are able to get the video working over the DVI connection, you may also require a DAC in order to connect with Apple TV's optical audio output to the TVs audio imput.
You may well wish to make sure that the DVI connection works before spending any money on a DAC..

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

How can I use the old Apple TV with new iTunes? It tells me to input a code in iTunes but iTunes no longer has a spot to input this code to allow sync. I can access the iTunes Store fine, just none of my Library

read this
https://discussions.apple.com/message/20429789#20429789

How can I create a new Care Plan with one or more care tasks

Hello,
I'm working on a Dutch website in the HealthVault Environment. I got difficulties in creating and updating a careplan with care tasks. Most likely it's due to lack of knowledge...
Following code works fine:
CarePlan plan = new CarePlan();
plan.Name = "test";
this.PersonInfo.SelectedRecord.NewItem(plan);
It creates a plan called [test]. But I don't know how to create a plan with one or more tasks in it: the tasks property is read only.
https://msdn.microsoft.com/en-us/library/microsoft.health.itemtypes.careplan.tasks.aspx
Half a year ago I was able to add an example of a careplan, which was a feature of the dev tools, but for some reason that's not possible anymore.
https://developer.healthvault.com/DataTypes/Overview?TypeId=415c95e0-0533-4d9c-ac73-91dc5031186c
So my question is, how can I add a new care plan with a task like the example from the HealthVault dev tools:
<tasks>
<task>
<name>
<text>Run 100 miles</text>
</name>
<description>Run 100 miles in 6 months</description>
<start-date>
<structured>
<date>
<y>2013</y>
<m>12</m>
<d>1</d>
</date>
</structured>
</start-date>
<end-date>
<structured>
<date>
<y>2014</y>
<m>6</m>
<d>1</d>
</date>
</structured>
</end-date>
<target-completion-date>
<structured>
<date>
<y>2014</y>
<m>12</m>
<d>31</d>
</date>
</structured>
</target-completion-date>
<sequence-number>279128532</sequence-number>
<recurrence>
<interval>
<text>Once</text>
</interval>
<times-in-interval>10</times-in-interval>
</recurrence>
<reference-id>p01vil21ckg7k2346y1g60337mmi20sg564l321l8pmpqev39n302572sewu76lh9019s3993e02924</reference-id>
</task>
</tasks>
Any help is welcome
Wilfred

Hi Wilfred,
Have you tried this?
CarePlan plan = new CarePlan();
plan.Name = "test";
plan.Tasks.Add(someTask)
If you have a task list already, you would need to enumerate through it and add one by one...
foreach (var task in existingList)
plan.Tasks.Add(task)

How can we get Dynamic columns and data with RTF Templates in BI Publisher

How can we get Dynamic columns and data with RTf Templates.
My requirement is :
create table xxinv_item_pei_taginfo(item_id number,
Organization_id number,
item varchar2(4000),
record_type varchar2(4000),
record_value CLOB,
State varchar2(4000));
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'USES','fever','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'HOW TO USE','one tablet daily','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'SIDE EFFECTS','XYZ','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'DRUG INTERACTION','ABC','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'OVERDOSE','Go and see doctor','TX');
insert into xxinv_item_pei_taginfo values( 493991 ,224, '1265-D30', 'NOTES','Take after meal','TX');
select * from xxinv_item_pei_taginfo;
Item id Org Id Item Record_type Record_value State
493991     224     1265-D30     USES     fever     TX
493991     224     1265-D30     HOW TO USE     one tablet daily     TX
493991     224     1265-D30     SIDE EFFECTS     XYZ     TX
493991     224     1265-D30     DRUG INTERACTION     ABC     TX
493991     224     1265-D30     OVERDOSE      Go and see doctor     TX
493991     224     1265-D30     NOTES     Take after meal     TX
Above is my data
I have to fetch the record_type from a lookup where I can have any of the record type, sometime USES, HOW TO USE, SIDE EFFECTS and sometimes some other set of record types
In my report I have to get these record typpes as field name dynamically whichever is available in that lookup and record values against them.
its a BI Publisher report.
please suggest

if you have data in db then you can create xml with needed structure
and so you can create bip report
do you have errors or .... ?

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the Component and Audio ports on my TV?

I have an Retina display MacBook Pro with HMDI out port. I also have an HDMI to Component cable with Audio Plugs. How can I get HDMI out to work with this cable when plugged into the MacBook Pro and connected to the TVs Component and Audio in ports.

Will not work. To my knowledge, dual converting like that isn't supported. The Mac must detect the connected video output device and that sort of info cannot be done across an analog component uni-directional connection.

How can i make a coppy both side with my hp 6500a plus all in one?

how can i make a both sides coppy with my hp 6500A plus all-in-one?

For windows:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02773085&cc=us&dlc=en&lc=en&product=4083977&tmp...
For MAC:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01935823&cc=us&dlc=en&lc=en&product=4083977&tmp...
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

I Don't have access to the previous computer on which i installed the photoshop, the m bord is broken and i have a new computer, how can i reinstall on my new comp' with my serial number?

I Don't have access to the previous computer on which i installed the photoshop, the m bord is broken and i have a new computer, how can i reinstall on my new comp' with my serial number?

You are allowed to have two machines with activated installations, so if you only had one installation, you still have the option to install on a second without doing anything further than that. If you originally downloaded the purchase thru Adobe then you might find a download link available in your Adobe account online. You can also download thru the following page if you can find your version:
Download and Installation Help -
https://helpx.adobe.com/download-install.html
You can have the first installation deactivated to free up the activation and have it available for another machine again as well. YOu need to contact Adobe Support thru chat for that. For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

How can we achive active/active cluster setup with Oracle

Hi Experts,
How can we achieve active/active database setup with oracle WITHOUT USING RAC.. As far as I know it's impossible (unless I'm wrong)..
We are using Oracle 11.2.0.1 64bit on Windows 2008 server. We deployed Oracle FailSafe but that's more of an active/passive solution based on a windows cluster.
The other solution we were thinking about is to use DataGuard and replication.. two servers.. the oracle instance running on one server generating logs, and the other server receive the logs and apply them to the physical standby db.. Still, this is not a real active/active setup.
So, is it possible to run 2 servers in an active/active cluster and have the oracle database in an active/active setup or have the instance running on multiple nodes (at the same time)?
Thanks

Let me give you a brief explanation of what the situation is and you can be the judge..
My client have four databases with the smallest one being 20GB and the biggest around the 35gb (SGA 750mb to 1.4gb (Tiny by DB standards) and probably on a normal day, you can run all four of them on a decent desktop).. The DBs are used to keep track of people information. Through out the year, the databases are almost sitting idle, and by idle I mean, the odd update here and there, the odd report..etc. No hard real processing of any sort. Two days of the year (end of year) we have all the operators consolidating records and what's not and they will be pounding away entering data and updating the tables - with hourly reports that goes to 3rd parties. The client expects a 99.99 up time and availability during those 2 days.
Now, tell me, How can I justify using RAC and spending hundreds of thousands of dollars in licensing and what ever extra costs introduced by the complexity of the environment for the above scenario knowing that I don't have any real use for RAC for 363 days of the year; and we MIGHT need it for 2 days of the year? This is the dilemma we're facing.
Thanks
Edited by: rsar001 on Sep 3, 2010 9:42 AM

How can my wife and I share cloud with 2 different login's

How can my wife and I share cloud with 2 different login's

If you each have separate iCloud accounts with different IDs, you can add the other person's account to your device(s) by going to Settings>Mail,Contacts,Calendars>Add Account>iCloud and signing in with their ID. These "secondary accounts" will sync mail, contacts, calendars, reminders and notes.

I was trying to add an itunes library to my computer, and now my itunes library can not be found. An ipod can be synced with only one iTunes library at a time. How can I find my Itunes library, complete with playlists ?

I was trying to add an itunes library to my computer, and now my itunes library can not be found. An ipod can be synced with only one iTunes library at a time. How can I find my Itunes library, complete with playlists ?

I have the same problem too and tried alot of things like time zone , restarting or changing DNS of wifi connection to 8.8.8.8 still nothing happens .. !!
iPhone 5s, iOS 8.3

How can I copy a Font Book library with "Collections" to my 2nd laptop?

How can I copy a Font Book library with "Collections" to my 2nd laptop?
I have a number of fonts (approx. 500) on my work laptop which are sorted to different Collections. I'd like to have a copy of the Font Book library with Collections on the laptop I use at home to work. I'd think there was a more straight forward way to do it, but I haven't found any posts regarding the matter so any help would be appreciated.
Thanks

To anyone who is reading this based on needing to copy their Font Book to another machine as I do, there is a way to make a copy of the fonts in Font Book by going to file/export fonts. Keep in mind that you will need to have all the fonts selected (command A) in your "All Fonts" list for them to be exported. You will then have a new folder saved to where ever you chose, with all your Font Book fonts in it.

How can I midi Roland TD-9 KX2 with Logic EXpress 9?

Similar Messages

Maybe you are looking for