How can I open raw CRF files with CS4

I have just purchased the olympus M1 and I have always used photoshop CS4.
I found that the raw files are CRF files and I cannot open them in photoshop
Do I have to download a plug in for CRF or is there another way
sandy

http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Mylenium

Similar Messages

  • How can I open a cpr- file with snow leopard ?

    How can I open a " cpr " file with my Mac OS X 10.6.8. ?

    Thank you for your fast reply ! The recommended software referes to video data. I received the cpr file from the ALDI fotobook software, if a want to secure a footobook layout. Therefor cpr must be a foto file.

  • How can I open quarkxpress 8 files with indesign?

    Hi, prior to purchasing CC a sales person whom I spoke with using online chat confirmed that InDesign would open QuarkXpress files and a plugin was already in the application.
    I can't open any quark files from InDesign. Can this be done without purchasing a third party plug-in?
    Thanks in advance

    InDesign can natively open Quark 4.x and 3.x files only. To open anything
    later you’ll need a copy of Q2ID from Markzware.

  • Can't open flash/fla files (with CS4) - might be version issue

    Hi,
    I am trying to edit a website for a friend (built with Flash and XML) and i can't seem to get into any of the .Fla files.
    I don't know if it is my version of Flash (CS4) or the files and not sure how i could test it. Could also just be a CS5 file hence i can't open it.
    Any help or suggestions would be great. Please help i don't know what to do, haha.
    Here is an upload of one of the files i am talking about
    http://www.2shared.com/file/kb2NKm0i/book-verification.html
    I wasn't sure which hosts were allowed so if i messed up please let me know.
    Thanks
    Asher

    Hi Asher,
    You  cannot open a file which is saved in future version such as CS5  version  in Flash CS4 .This is as designed .
    If you need to open a CS5 file in CS4 , You need to save the file as CS4 file  and then open in Flash CS4 .
    Thanks
    Sukhbir
    Flash Authoring

  • How can i open a pdf file with pdf paramter that extention is not ".pdf" in ie?

    for example: open in ie with url: "c:\\a.efb#toolbar=0 ", but it can not see anything,the "a.efb" is a sure pdf file that just change the file ext. however i can open  the file in ie without paramters!
    my english is not well,if you know what i say ,please write the answer,thanks!

    I do not know why you want to open a local file in IE, and not directly in Adobe Reader.
    Does it work if you rename the file extension to .pdf?
    If yes, then maybe it will work if you create a file association for .efb as AcroExch.Document to open with AcroRd32.exe

  • How can I take raw image files with my iPhone?

    I want raw image files from my iPhone so that I can process them with ACR.

    The phone only works in one resolution. You cannot reduce it. The back camera has a higher resolution than the front camera. That is in the specifications. You can check the camera information in the User Guide here. http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf

  • How can I open a .mov file with iMovie?

    Hi,
    I keep trying to open a .mov file in iMovie and it isn't doing it. Is that not a recognized file extension? Should I convert the video file somehow?
    Thanks!

    .mov is just a container for a variety of video codecs, some of which are not recognized by iMovie.  You will need to convert it first with a third party app such as Media Converter (which is free, see:   http://media-converter.sourceforge.net). 
    Another free app  VideoSpec (see:  http://videospec.free.fr) is useful for identifying all the details of a video clip
    Geoff.

  • How can I open a psd file with layers in touch?

    I want to edit a psd file with layers in photoshop touch. Is this possible?

    No. (Kind of, sort of.) You can export PS Touch projects for import into desktop Photoshop and have the layers intact for further editing but you cannot do the reverse; any imported PSD will be automatically flattened. (I'm guessing this was done to prevent crashing. PS Touch supports 12 layers max vs. the potential thousands available in desktop Photoshop.)

  • How can I open a .buc file with PSE6 from previous PSE6 back up?

    Hi!  I am trying to restore a back up catalog from an external hard drive onto our new PC (PSE6-Windows 7) as our laptop (PSE6-Windows XP) crashed.  I reinstalled PSE6 onto our new PC but somehow the Organizer nor the Editor recognise the .buc file it created!  The first back up I ever made was a complete back up, then I always backed up incrementally on the external hard drive.  I can see a .buc and a .tly file on the ext. hard drive through Windows Explorer 7 (new PC).  I cannot see the .buc file through Windows Explorer XP (old PC)... but that is probably not important...
    I succesfully restored what seem to be my last back up through the File/Restore back up.../ from external hard drive/ original location/... on both PC.  However, the categories do not appear, only the photos from my last incremental back up were restored.  1) Don't understand why it says that I need 30 discs to restore files when I always performed incremental back up on ext. hard drive under the same location (.tly).  Should I have changed the file name at each incremental back up? 2) I read on forum to copy and rename the .buc file as a .psa. file on the c:/ drive. I tried that through Windows Explorer AND through the Organizer but no success.  Exactly how/where can I do that?  I have all the photos saved as B000... on the ext. hard drive, I just want the catalog back as I don't fancy starting all over again, I have over 3000 photos categorised in that .buc file!  Thanks for your help!

    Hi Barb_O,
    Many thanks for trying to help!
    Hmmm.. it seems that I only have the last incremental back up then as I always saved under backup.tly... not a good news but not surprised!
    1 -- Do you have any other backups (taken with different software than PSE) of your photo files ? 
    Yes, I have the photos backed up either separately on Windows alone on ext. hard drive and/or through PSE as B000... on hard drive and CDs.
    2 -- Does the hard drive from your XP laptop still work ?
    Well, when it was last on the laptop, we could see the desktop but we could not do anything else than look at the desktop!  A message used to come up saying a failure was imminent with the hard drive, urging us to do a back up (but we could not as everything was frozen).  Then, I went into DOS (?) did something (?) and the message would not appear anymore but still the whole thing was frozen.  Still have the drive, might take it to a computer shop to recover the data, if possible. 
    3 -- Suggest that you post the folder names and folder structure of all the folders on that external hard drive.
    There are 4,524 item on that ext. hard drive so would be too long a list! I have folders for Word docs, music, etc but I have not structured the back up stuff at all so I open the ext. hard drive and I see PSE photo files from B0000000 to B0004798 including jpeg, .CR2 and .xmp files. Then there is one backup.tly and one catalog.buc and 17 video files.
    4 -- Also, how many .buc files are there on that external hard drive and what are the dates that each .buc file was written. 
    The only .buc file was created 30/10/09 (when I actually started to make back up copies following a mysterious wholeAdobe catalog disapearance, I spent hours re-building the catalog of my then 2,500 photos!) and last modified 11/03/10. Same date for the only .tly file.  Reading the back up command instructions for incremental back up, I assumed that each time I made a new back it was not overwriting it but only adding on to it!...  I have lost my catalog (again), haven't I?  I think I will start a good old hard copy album!!!
    5 -- You say that the Categories do not appear. What about the Tags - do you see all of your Tags ?  There are no tags and no albums, only 213 photos.  Any way I could at least restore the tagging/albums of these photos?
    Any hope to recover the original catalog on the failed hard drive?  I hope so now!
    Many thanks again!

  • How can I open raw files from my Nikon D7100 in CS4 or CS5?

    How can I open raw files from my Nikon D7100 in CS4 or CS5?

    Andy,
    In the simple and short form, what happens with the ACR (Adobe Camera RAW) module is that it gets updated with regularity, to accommodate the camera mfgr's. changes for their newer models. That ACR works within the host program, such as Ps, PsElements, Lightroom, etc.. At a point, Adobe ceases to support older host program versions. When that happens, the user has a few options:
    Upgrade the host program version
    Use another host program, such as PsElements or Lightroom
    Use the free DNG converter, per Curt's suggestion. That is not host program dependent
    Glad that the DNG Converter works for you.
    Good luck,
    Hunt

  • I have a new IMAC with a Maverick platform (I can update to Yosemite). I did all graphics on a G5 Power PC (very old), in Freehand (very old)... How can I open old Freehand files on this new Mac? Can I still open and work in Freehand on this new Mac?

    I have a new IMAC with a Maverick platform (I can update to Yosemite). I did all graphics on a G5 Power PC (very old), in Freehand (very old)...
    How can I open old Freehand files on this new Mac?
    Can I still open and work in Freehand on this new Mac?

    Let me see if I've gotten this right! You want to remove an account from BOTH machines? Do this for your new machine first, then for the other.
    Click the Apple logo on the top left of the screen, System Preferences, Users and Groups (under Systems), unlock the lock in the window if its locked (you need to know the password), select the user that you wish to remove, and click the - sign next to the + sign for Login options. A window will pop up with some options. Select Delete this user and securely, and click 'Delete user'.
    After this, do an update from the App Store.
    Thats all there is to it.
    For the other machine repeat the process except for one thing. Before you delete the user in this case YOU, you will have to give Administrator priviledges to your son bu checking the box 'Allow user to administer this computer'.
    Do NOT do anything from Finder ... if you dont know how to fix the consequences of the problems caused.
    There is no need to unauthorize your iTunes account on your new machine. Do it on the old machine though.

  • How can i open RAW files in Photoshop CS4 from Canon EOS 6D camera?

    How can i open RAW files in Photoshop CS4 from Canon EOS 6D camera?

    You can't directly but can use DNG Converter to convert your files so ACR can read and process them.
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications

  • How can I open RAW files from Nikon D7100 in Photoshop Elements 9?

    How can I open RAW files from my Nikon D7100 in Photoshop Elements 9

    Three choices:
    1. Upgrade to PSE11
    2. download the free Adobe DNG Converter and then convert your RAWs to DNG, which will open in PSE9
    3. Use manufacturer's software and convert to TIF (or JPG)

  • I can not open raw image files from my Cannon 5d mark iii with cs6 and my cs6 in mac

    I can not open raw image files from my Cannon 5d mark iii with cs6 and my cs6 in mac

    The Mk III requires an updated version of Camera RAw, so run Help --> Updates and install it.
    Mylenium

  • I can't open or save file with Java Web Start

    Hi,
    i can't open or save file with Java Web Start:
    import java.io.*;
    import java.util.*;
    public class MetaDataFileCreator {
    public String fileNameSpace = null;
    public String fileName = null;
    protected Properties file = null;
    public MetaDataFileCreator(String fileNameSpace, String fileName) {
    this.fileNameSpace = fileNameSpace;
    this.fileName = fileName;
    public void createMetaDataFile() {
    try {
    System.out.println("file METADATA");
    ClassLoader cl = this.getClass().getClassLoader();
    String nameFileMetaData = fileNameSpace + fileName + ".txt";
    FileOutputStream fileOS = new FileOutputStream(cl.getResource(nameFileMetaData).getFile());
    file = new Properties();
    file.setProperty("aaaaa", "aaaa");
    file.store(fileOS, "");
    fileOS.close();
    } catch (Exception e) {
    System.out.println("Error writing metadata-file: " + e);
    System.exit(1);
    e.printStackTrace();
    I have try also to open a file like this:
    ClassLoader cl = this.getClass().getClassLoader();
    file.load(cl.getResourceAsStream(nameFile));
    also like this:
    try {
    fos = (FileOpenService)ServiceManager.lookup("javax.jnlp.FileOpenService");
    fss = (FileSaveService)ServiceManager.lookup("javax.jnlp.FileSaveService");
    } catch (UnavailableServiceException e) {
    fss = null;
    fos = null;
    System.out.println("Error with JNLP");
    System.exit(1);
    if (fss != null && fos != null) {
    try {
    // get a FileContents object to work with from the
    // FileOpenService
    FileContents fc = fos.openFileDialog(null, null);
    //FileContents newfc2 = fss.saveAsFileDialog(null, null, fc);
    // get the OutputStream and write the file back out
    if (fc.canWrite()) {
    // don't append
    os = fc.getOutputStream(false);
    } catch (Exception e) {
    e.printStackTrace();
    also like this:
    File f = new File((System.getProperty("user.home")+"x.txt").toString());
    FileOutputStream fileX = new FileOutputStream(f);
    OutputX = new PrintWriter(new BufferedWriter(new OutputStreamWriter(fileX, "UTF8")));
    OutputX.println(....
    but it doesn't work with Java Web Start.
    Can someone help me?
    How can I open or save file?
    thank you.
    Sebastiano

    Did you specify <all-permissions/> in your JNLP file? Did you sign your code? What error are you getting?

Maybe you are looking for