How can I open the Create tab?

I want to make a greeting card following the instructions of the book "Adobe Photoshop Elements 8 Classroom in a Book", using the CD enclosed in the book. I follow the instructions from page 140 of that book, but when I click the purple Create tab above the Panel Bin, the image of the frames doesn`t open in the Edit pane. So, the Purple Create tab doesn`t open any image or tab in any part of the screen. It doesn`t work at all. I try again with my own pictures, but the result was the same. My computer is an iMac with Mac OSX (v10.6), and my Browser is Safari.
Many thanks for the help.
Hector.

Have you turned off the panel bin? First try doing a Reset Panels. If that doesn't do it, quit PSE, then go to library>application support>adobe>Photoshop Elements>8.0>locale>en_US (will be different if you aren't in the US) and delete mediadatabase.db3. (Note that this the library at the top level of your hard drive, not your username>library or system>library).
When you restart PSE don't do anything until you see the icons in the effects panel--give it time to rebuild everything.

Similar Messages

When I open a new tab, how can I get the second tab to be me my home page also?

I know how to right click and open a new tab when I am browsing but if I want to open just a blank new tab, how can I get the second tab to be my home page also?

I know how to right click and open a new tab when I am browsing but if I want to open just a blank new tab, how can I get the second tab to be my home page also?

When I start Firefox 4 two tabs open one is my homepage and the other is "google toolbar updated", how can i stop the second tab opening?

I have google toolbar installed on my Firefox 4, whenever I start firefox two tabs open, one is my homepage gmail and the other is "google toolbar updated".
How can I stop the second tab from opening?

See these articles for some suggestions:
* [[Firefox has just updated tab shows each time you start Firefox]]
* [[How to set the home page]] - Firefox supports multiple home pages separated by '|' symbols
* http://kb.mozillazine.org/Preferences_not_saved

How can I specify the default tab in a CHM Output?

My company uses CHM-based help for some of its products. We build the CHM files from RoboHelp 9, and while these CHM files don't really have a full Index attached to them, the Index tab shows up in the output anyway. Unfortunately, we are suddenly seeing that when the CHM file is launched from our program, the Index tab is displayed by default. We'd rather have the Contents tab be the default look, especially considering that the Index does not exist.
I have poked around into how you can specify a default tab for a CHM file, and the only information I have found suggests that using a CHM file creates a file (HH.dat) that specifies which tab should be displayed on a user-by-user basis, and that the last tab displayed when you close the CHM should be the first one displayed when you re-open it. While this is true if you open the CHM independent from the product, when you launch it from our program, it's all Index, all the time.
So, my question is: How can I specify the default tab for a CHM file? Or, failing that, how can I excise the Index tab from my CHM output.

Hi there
This will be something up to your application developer to resolve. When s/he issues the call to open the CHM, there are parameters that may be used to always open with the desired tab "in front".
Point your developer to the link below and advise that s/he is most likely interested in the section titled: Programming Tips.
Click here to view
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

How can I open the EP login page in the same pop-up window?

is it possible for me to using / only one window(Browser) pop-up to EP Page(Login or iView...).
In the firs general html page I create a EP login page link action[eg. "window.open('url', 'target_name')"],
but always launching new pop-up window(Browser).
How can I open the EP login page in the only one window(pop-up)?
Could anybody help me by giving suggestion and codding?
Thanks,
jin.

Hi,
if you want to redirect the root of portal system (http://portal/) to the login page, edit the
file and change the body tag as follow:
\usr\sap\J2E\JC00\j2ee\cluster\server0\apps\sap.com\com.sap.engine.docs.examples\servlet_jsp\_default\root\index.html
<body onload="location.replace('irj/portal' + document.location.search)"></body>

I can not open the bookmarks tab or use the right mouse button in firefox

''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/1053467 /questions/1053467]''
I recently downloaded firefox to my new laptop. I can not open the bookmarks tab or use any of the right mouse button options.

Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
*Download the full Firefox installer and save the file to the desktop https://www.mozilla.org/en-US/firefox/all/
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

How can i open the database by force?

my database is crash because the machine power problem, when i restart again, oracle error say the control file is older than the system tablespace file,
so i have to create the controlfile again, then , the database need recover , but my database is not archived, it can't take a media recoer , what should i do?
how can i open the database even lost some data?

Pallofa,
Try open img file using some software.
You need a software to mount the img file.
http://techie-buzz.com/how-to/mount-iso-files-as-a-virtual-cd-dvd-drive.html
If thinstead of using an img file, just use this command.
repair-bde e: d: -rp xxxx-xxxxx-xxxxxx-xxxxx -f -lf c:\log.txt
where d is the portable disk whereyou want the data and d drive should at least
equal to e drive.
Where xxxx-xxxx-xxxxx is the 48 digit recovery password.
-lf will generate a log file and point to a certain location, here I have pointed to c drive.
After repair-bde is completed, run chkdsk /f on D drive, then try to access your data.
Manoj Sehgal

How can I open the WD iView within the same pop-up window?

I have created a Web Dynpro(for ABAP) iView direct link that a hyperlink action.
(From different Web page)
And I used window.open(appointment to target) of javascript for opening only one window.
However When I click the link it opens in a new window every time.
(Also iview of different type is same)
How can I open the WD iView within the same pop-up window?
Could anybody help me by giving suggestion and codding?
Regards
Jin

Hi JinKyu,
Have you tried window.location() in place of window.open() something like
window.location = 'URL'
Rgds,
Vivek

How can I call the create method in BO from Application Service

Hello!
When I create a Business Object, CAF generates some methods automatically.
How can I call the create method in the BO from Application Service logic?
When i call the method then the entityManager and the sessionContext is NULL.
How can I initialize this?
Can anybody help me?
Thanks, Thomas

If you are using CE 7.11...
1) In the Application Services, add the BO as dependant object in dependencies tab.
2) In the implemention, add the following codes to call create method of the BO:
this.get<BO>.createMethod();
julius

How can i open the archived pst file in my Mac Air

How can i open the Archived outlook pst file in my Mac air, i want to access my old outlook mails.

System.setProperty("java.security.policy", "system.policy");Is this a new feature in JDK1.4? I don't see it in
the documentation for JDK1.3.1 that I'm currently
using.Look more closely. There is indeed a setProperty(String, String) in
http://java.sun.com/j2se/1.3/docs/api/java/lang/System.html
"Since 1.2"
- Marcus

I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to

I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to do that?

kahjot wrote:
Snow Leopard's Startup Disk pref can’t see Yosemite volumes. So the only way to switch from Snow Leopard to Yosemite is to do what Niel mentioned. Doesn't matter whether it's connected by USB or Firewire, although performance via FW would be faster.
Are you saying that Yos/10.10, as a volume located in a mounted external drive won't appear as an option in Snow Leopard's Startup Disc, in Sys Prefs? I've never heard this one before. AFAIK any mounted volume, regardless of OS, should appear there. I would think that, if it appears in the Boot Picker/Startup Manager it would also appear and could be booted to from Snow's Startup Disk. I can't test this myself, since I don't have Yos. Is what you are saying documented somewhere?

When I opened iweb it opened as a file I deleated. I have a published website with godaddy and would like to update. How can I open the existing iWeb app to the site that is already published?

When I opened iweb it opened as a file I deleated. I have a published website with godaddy and would like to update. How can I open the existing iWeb app to the site that is already published?

You cannot retrieve the already published site as iWeb CANNOT open it - it has no import facility.
You need your domain.sites file, which you can find under User/Library/Application Support/iWeb/domain.sites. You do not need any kind of account for this because it is your domain.sites file that resides on the hard drive of your Mac anyway. Find this file and you can alter your website.
Use a spotlight search to try and find it and if this does not work you can download something called Find Any File. If you really can't find it, then you'll have to start from scratch because iWeb cannot open a site that is already published.

I've downloaded Photpshop elements 13 : how can I open the application ?

I've downloaded Photpshop elements 13 : how can I open the application ?

Thank you Kglad and John
Your question about 32 bit or 64 bit was good. In fact, before our exchanges, I downloaded Photoshop but I didn't run the application.
After our messages, I tried to click the setup
First,when I clicked "setup" in the directory ""32 bit PhotoshopElem13" I had an error message , then, I clicked the setup in the second directory, it was the good one.... 64 bit !
All is OK
"Merci" from Paris

I have the iPhone locked How can I open the SIM-lock

I have the iPhone locked How can I open the SIM-lock

Contact the carrier that the phone is locked to. Only the carrier can unlock your phone.

I have an old Kodak Photo CD and Photoshop Elements 11 on Windows 7. How can I open the .pcd images?

I have an old Kodak Photo CD (1999) and Photoshop Elements 11 on Windows 7. How can I open the .pcd images?
Please help me open these photos. They are very important to me and I need to access them.
If I can't do it with any of the software installed on my computer, would someone be willing to open them, save them as jpgs and send them to me?
Thank you so much, Nancy

You can get the plugin here by downloading the Extra Content for Photoshop CS3 File 2
Just be sure to follow Note:Very Important Instructions or the link won't work.
http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html
After downloading the PHSPCS3_Cont_WWE.exe, double click on it to extract the contents, probably to your desktop.
Then in the Goodies folder, Optional Plugins folder, you'll see the Kodak PhotoCD folder
Open that and copy the Photo CD.8BI to C:\Program Files (x86)\Adobe\Photoshop Elements 11\Plug-Ins
Copy the profiles to C:\Program Files (x86)\Common Files\Adobe\Color\Profiles

How can I open the Create tab?

Similar Messages

Maybe you are looking for