How can I pair iPhone 6 / 8.1 with Audi and Mercedes until 8.1 is fixed?

How can I pair iPhone 6/8.1 with Audi and Mercedes

Generally your put the vehicle into discovery mode, turn Bluetooth on for the phone and the two should discover each other. I don't know what you mean about getting 8.1 fixed, as it is working just fine for me in my vehicle. Try going into the phone and removing the car(s) from the phone list. Turn off Bluetooth. Go into Settings>General>Reset Network Settings. Do a reset on the phone, hold the sleep/wake and home buttons together until you see the Apple Logo and release. The phone will reboot. Go into the vehicle(s) and remove all reference to the phone from the vehicle list. Turn the car off, then back on. Put the vehicle's system into discovery/pairing mode. Turn Bluetooth on for the iPhone. The two should pair after following any additional instructions from the vehicle's user guide, such as entering a PIN code.

Similar Messages

How can I resize a pdf page content with annotations and highlights in Acrobat Pro?

How can I resize a pdf page content with annotations and highlights in Acrobat Pro while maintaining page size and annotation/highlight interactivity? I've tried to use the crop tool in Acrobat Pro (9) and the page does resize, but the highlights and annotations go all over the place. I specifically need to scale the page content smaller (83%) but maintain page size and annotation/highlight to content connection and interactivity.

An old trick (not recommended) would be to print to a new PDF with the page size selected but a scaling of the content. Only print the document, not the markup, to a new PDF. Close that PDF when done and reopen the old one (or maybe a copy of the old one for safety) and use Document Replace pages and select the new document to replace your current pages. You will then have to go back through the markup to locate it all correctly. There may be a more elegant way, but this may be the fastest.

TS3999 how can I stop syncing my outlook calendar with icloud and not loose the existing calandar data in outlook? the calendar data which downloads to outlook, was also wiped off the gmail calendar after the icloud sync , how can I restore the data to g

How can I stop syncing my outlook calendar with iCloud and not lose the existing calendar data in outlook? The calendar data which downloads to Outlook was also wiped off the Gmail calendar after the iCloud sync, how can I restore the data to Gmail?

same issue, looks like nobody answered you from last JULY....

Can't pair iPhone 3G 3.0 with Unibody Macbook

I've updated my iPhone 3G to 3.0, but I can't pair it with any of my macs.
I've tried:
15" unibody Macbook Pro (last. gen, no SD slot)
13" unibody Macbook
24" iMac (latest gen.)
It pairs fine with my XP laptop.
When I pair it, it seems to work ok, I get the popup on the phone screen, "confirm you see XXXXX on the computer "Name"", I tap pair, and then nothing happens and on OSX, it says there was an error pairing.
What's up?

I had a similar problem with my iPhone and Macbook.
What I did that did work was this:
1) Make sure bluetooth is turned ON on your iPhone, but tethering off
2) System Preferences
3) Bluetooth
4) + Sign to add device (Launches Bluetooth Setup Assistant)
5) Click Continue
6) Select Mobile Phone, Click Continue
7) Click Continue to let it gather information
8) It will show a passcode, and this should also appear on the iPhone
9) Click allow/accept or whatever is says on the iPhone when promoted with the code
10) It will appear like its waiting for something else, just click continue on the Bluetooth assistant and it should continue the rest of the process.
11) It should then create that Bluetoon Pan network connection
What was failing for me before was after clicking allow/accept on the iPhone I was waiting thinking it should automatically detect this on the Bluetooth Setup Assistant on the mac, at which point it would fail.

Can't pair iphone ios 8.1 with mac

Am running Yosemite on my Mac and cannot get handoff to work. Tried to pair iphone with the mac and haven't been able to do it. Keep getting not connected on bluetooth.Am supposed to be able to get phone calls on Mac and make them using Contacts. No to both.

Exact same problem on my end.
MBA 2012 Yosemite with an iPhone 5s 8.1
Not only is the phone NOT pairing with my iMac, I can't seem to get handoff to work. When trying to pair in the system preferences, it shows that the phone is connected for a split-second, then I get the "Network Unavailable" message also.

How can i stop iPhone users from seeing my picture and home address and email on their phones? it just pops up. please help this stop.

My boyfriend has the iPhone 6 (regular not plus) and my information such as email home address and a picture i took in photo booth on my laptop a few years ago is what what pops up on his phone? he has me stored under a different picture and name but when he got the iPhone 6 this other pic and all my info popped up when i called him? how is this so? can others see my information too? how can i make this stop? i do not want other to have access to that info.

See, that's just the thing...it isn't checked. It never was.
It just keeps restoring the home page bookmarks for Safari, nothing more. I just downloaded an update for the NYTimes app, and it made my bookmarks reappear on the home screen again, so the only thing I can assume is that these are somehow linked to my Apple account...only question is, why?

How can one store hd video for use with ipad and apple tv?

I'm looking for solutions. I don't have a computer. Not interested in renting what i really like or collecting blu rays.
Buy enough hd video films from the store and the iPad runs out of hard drive. I could buy more storage from the iCloud. What else could I do? The new apple tvs don't have a hard drive for storage. Hypershop.com has a hyperdrive external drive for the iPad, but 720P, is that full HD? They also have a new kickstarter funded product cloudFTP which connects hard drives etc to the iPad wirelessly. Not sure if this would work ok.
Any other ideas?

There are some cables you can use. Depends on what model iPad you have and what interface is on the projector. You could also get a router to take with you and set up your wifi connection. There's some portable routers.
You can connect via a cable or wireless using an Apple TV.
http://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htmhttp://ipad.about.com/od/iPad_Guide/a/How-To-Connect-Your-Ipad-To-Your-Tv.htm
Connect an iPad to a Television or Projector
http://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-faq/how-to-connect-ipad-to-tv-te levision-projector.html
Connecting iPad iPhone or iPod to TV or Projector
http://www.disabled-world.com/assistivedevices/computer/ipad-tv.phphttp://www.disabled-world.com/assistivedevices/computer/ipad-tv.php
iPad Accessories: Connections for a TV or Projector
http://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.htmlhttp://www.dummies.com/how-to/content/ipad-accessories-connections-for-a-tv-or-p rojector.html
You may be interested in AirPlay on the Apple TV:
http://www.apple.com/airplay/http://www.apple.com/airplay/
http://www.apple.com/airplay/http://www.apple.com/airplay/
Alternately, there are Apple Digital AV Adapters for hardwired connections:
http://support.apple.com/kb/ht4108http://support.apple.com/kb/ht4108
http://support.apple.com/kb/ht4108http://support.apple.com/kb/ht4108
Portable routers http://compnetworking.about.com/od/routers/tp/travel_routers.htm
 Cheers, Tom

Nforce420: How can I upgrade BIOS on a computer with NTFS and no flopp

I have a multimedia PC in my living room hooked up to my TV and I am planning to use it as a PVR, MP3 jukebox, DVD player and photo album.
I build this machine in a small aluminium case, with the minimum components. I chose the nForce as the platform for this machine to minimise the number of components (and noise/heat).
I'm running Windows XP with NTFS and there is no floppy drive in this system. Do you guys have an idea about how I can upgrade the bios from 2.0 to 2.4 (or 2.6?)?
Thanks in advance

Well, if you have any kind of internet connection on the computer, then MSI LiveUpdate is the way to go. I had the same problem after I didn't quite plug in my floppy right the other day -- the burning smell was exhilirating but my computer was fine. I have only NTFS partitions too and no floppy, but with an Internet connection it was easy to update the bios.
For some reason LiveUpdate wanted to tell me that the latest BIOS is 2.4, so if you navigate to C:\Program Files\Setup Files\MS6373v240 and replace the BIOS image files there with the 2.6 ones you downloaded, and run Winflash.exe, it will flash you to 2.6.
Alternately you could just download all that stuff on another computer and burn a CD with it. You could make that CD bootable or you could boot off a Win98 startup CD or something and put your CD in after the computer boots up...not really sure how well that would work.
Winflash has worked fine for me the three times I've used it (from 2.4 to 2.5, then back to 2.4, and now to 2.6).

How can you keep iphone from connecting to unknown networks and stop asking about them?

When i have WiFi on, but "ask to join" is turned off, i've found that my iphone connects to open unsecured networks on its own whenever it can. These are not networks it has previously been connected to. I want it to behave like every other WiFi device out there where i have a list of known networks that it accesses when in range and i don't want it to ask me or connect to anything else when not in range. I understand i can turn WiFi off but this is a pretty big pain to have to manually do this every time i go in and out of range of networks i want to be connected to.
It also would be nice if anyone knows of a way to edit my know networks list as a list instead of having to be in range of the network and then one by one go through every visible network to figure out which ones it considers known. Especially when it has automatically added networks without my knowledge when the ask to join was turned off.

Let me give you an example. I'm at a United lounge at O'Hare Airport right now. They have WiFi here but it requires that you log on in order to connect to the internet. I connect to WiFi from my laptop. All good. Then, immediately, my iPhone connects to the same network. But because I haven't logged on from my iPhone, I can't get online. This kills the internet on my iPhone because I'm connected to a network with no internet access. If on my iPhone I "Forget this Network" and then come back next week, I'll find that it connects to the exact same network.
I travel a lot and almost all of the networks I use on a daily basis require a login of some sort.
I could turn off WiFi but then I have to remember to turn it on when I actually do want to connect to a network, like when I'm at home.
Any idea how to prevent the mirroring of WiFi connections? Or at a minimum make sure the "Forget this Network" option actually works?

How can I stop iphone updating same app with my Ipad

everytime when I downloaded new app. for my Ipad, my iphone will also download the same app automatically. I actually don't need this. So can I stop it?

Go into Settings, iTunes & App Store, turn off Automatic Downloads on the phone.

How can access my iphone 5 when my home button and my lock button are both broken? Can I turn it on with the volume button?

Can I set it up so my screen turns on when I change the volume? Can I use something else? PLEASE HELP ME! I already tried to call apple when my screen cracked and they said that they can't do anything about it without charging me at least 200 dollars.

You can get one for around $50 I think. I know it's expensive, but it's better than paying $200 to Apple.
If you aren't able to get the case, you can turn it on by plugging it in for just a moment to any power source. You can't turn it on using the volume buttons.

How can I get a list of locations with address and contact info?

In Adobe Story Plus, I've gone through the effort of entering address and contact info for all locations. I would like to now use this information.
When I choose Sets and Locations, I get the set names only, separated by Studio and Location. No locations, no addresses.
When I choose to export the Set List as XML, I get an XML file that seem to contain the address information. However, it does not appear to be a valid XML file, readable neither in Excel nor Google Docs.
Are there reports that I can create that include this information? Is there a useful way to export XML and open in Excel/Number/Google Docs/Word, etc?
I'm about to embark on a search to how the XML can be formatted properly but this isn't really where I wanted to be spending my time on this project.
Thanks.

Yes. I tried it on Windows version.
Would you mind doing the following steps to view that XML file as a table in Safari? Then from safari, you can copy paste it Excel.
1. Export the Set List XML from Story.
2. Extract the 'transformSetListIntoTable.xsl' file from the attached zip file and place it in the same directory in which Set List XML is present.
3. Open the Set List xml file in a text editor and paste the following text at its very beginning.
<?xml-stylesheet type="text/xsl" href="transformSetListIntoTable.xsl"?>
4. Save the changes.
5. Open the Set List xml file in Safari
6. In Safari, Select All and paste it inside Excel.

How can I merge two iTunes folder, one with music and the other without?

Two years ago Apple support suggested moving my iTunes folder out of my Home folder to the HD level in order to share it across users. This is no longer necessary. How do I move my music back to my Home folder since now I have an Itunes folder at the HD level (along with application, library, system, users folders) and an Itunes folder under Music in my Home folder. For example both those itunes folders have a mobile application, album artwork, and previous itunes library subfolder as well as itunes library extras.itdb and itunes library genius.itdb. How do I merge them or which ones do I delete? The files in the mobile app folder in my Home folder have a newer "last modified" date. Currenty under Itunes-->Preferences-->Advanced, it says Itunes media location is /itunes/itunes media/ music. I assumes that is the HD level folder. What happens if I hit reset?
I am using Itunes 10.6.3.
Any help tailored to a novice would be great. Thanks.

Thanks for the links, Limnos.
If you are willing to continue helping, here's what I found.
Just to clarify the two iTunes folders I am refering to are:
username-->Music-->iTunes
HD-->iTunes
I am presuming each location has a full set of files as outlined in the above links?
Not all the files are in both locations. Most are.
- The Itunes folder in my home folder does not have itunes library.xml.
- The Itunes folder in my home folder has a subfolder called Mobile Applications (username-->Music-->iTunes--> Mobile application). The Itunes folder at the HD level also has a Mobile Application folder but it is a subfolder of Itunes Media folder (HD-->iTunes--> iTunes Media-->Mobile applications) and has no files in it.
- I do not have an iTunes Media in the iTunes folder in my home folder.
- also the Itunes media folder (HD-->iTunes--> iTunes Media) has subfolders by type (books, movies, itunes u, music etc...) but the iTunes Media-->Music also has some of the same subfolders ( iTunes Media-->Music-->books, iTunes Media-->Music-->Movies, iTunes Media-->Music-->iTunes U). Is this normal repetition?
You say:
/itunes/itunes media/ music
but it is important to note what comes before all that.
There is nothing as far as I can tell before that first forward slash. Since the only iTunes Media folder I have is in the iTunes folder that resides at the HD level (HD-->iTunes--> iTunes Media folder) not the iTunes folder in my home folder (username-->Music-->iTunes) , I assume that's the one that holds the music.
Keep iTunes media folder organized and Copy files to iTunes Media folder when adding to library are both checked on
Does that give more clarity into my problem?

How can I prevent my screen getting covered with black and white lines while working on the internet which only happens with firefox and only go when I 'go back' or go down a page?

It happens as I surf - horizontal black and white lines particularly when I scroll down and only goes if I can go to a new page or go back a page. It is driving me crazy and only happens with firefox. I have disabled all plug ins but it still happens.

Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

How can I update firefox in a network with proxy and firewall?

Good morning,
I use firefox 10.0.1 and I am trying update to 10.0.2 but I can't.
My desktop is connected on lan of my job, and here have a proxy and a firewall. What can I do or release on servers to update the browser?

You can ask your IT to have you download the updates or give you the address of the proxy server. With proper description of request and the approval of your superior, I'm sure the support team will allow it.

How can I pair iPhone 6 / 8.1 with Audi and Mercedes until 8.1 is fixed?

Similar Messages

Maybe you are looking for