How Can I produce a Pro_Res files with 5.1 (6 channels of audio)

I need to screen a feature film in a digital Theater and I want to make sure the Dolby Digital Mix is heard the way the film was mixed and not the way FCP does a 2 channel mix down.
I have the timeline setup with the 6 channels but when I go to export the file to deliver one QT to the exhibitor, it won't let me export the 5.1 mix.
I've read several post, Exported the file with Compressor but when I check the channels my audio was not exported the right way.
Any ideas?

there is this tutorial online @ Creative Cow from Shane Ross:
http://library.creativecow.net/articles/ross_shane/multi-audio/video-tutorial
Are they screening from the QT or from tape?

Similar Messages

How can I open a cpr- file with snow leopard ?

How can I open a " cpr " file with my Mac OS X 10.6.8. ?

Thank you for your fast reply ! The recommended software referes to video data. I received the cpr file from the ALDI fotobook software, if a want to secure a footobook layout. Therefor cpr must be a foto file.

How can I automatically create the files with serie-name?

Hello, Everyone,
I have a question again.
How can I automatically create the file with a serie-filename?
e.g. I have a program, it will repeat 5 times, and every time it will create a bmp-file, and I want to let this program automatically save these 5 files with a Serie-filename like File001.bmp, File002.bmp, .... File005.bmp.
How can I do it?`
Thanks a lot.
Regarts,
Johnny

Hi Deepu,
one more comment
The format code should be "%04d" to get leading zeros and have filenames with same length...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How can I create a exe file with a tab control on it that work´s ?

I have a VI with many controls and indicators,these are spread on a tab control.This tab control works with out any problems but if i create a exe file then the tab control is fixed. How can I create a exe file so that the tab control on it work´s ?

I have made a new Posting with the same question but this time I added a screenshot of the VI.
Attachments:
project7.1.jpg ‏129 KB

How can (parse) i use XML file with missing EndTag

hi,
i have an application which writes an "XML file".
another application should read that XML file, build an DOM and
access the nodes with xpath.
my problem. if the first application is not finished there are tags
missing. e.g. </xml>. but the seconds application cannot wait until the first application finishes it task.
if i now read the XML file the parser cannot load it because the end tags are missing.
my question:
how can i deactivate the check or how can i read the XML file and access it via XPath (my application is using at the moment XPath to access the nodes and i dont want to change that)
as parser i am using XERCES
alex

As far as I know, you can't do this - xml must be well formed (this is sort of a bedrock of xml). There may be some work around's, but I'm not aware of any - and they would most likely be hacks.

How can i write a XML file with oracle data ?

How can i write a XML file using PL/SQL.
Can i do as follows.
1.Open a file using UTL_FILE.FOPEN(LC_DIR_LOC,'abc.xml','W')     ;
2.write all the required tag and value using UTL.put_line
that is enough. Is not, please guide me to write.
gk

Having Oracle 9i.
One more doubt. In the speck, some constand values are there, When i write the same into file, How can i write ?.
1. l_str := ' "E27" '
or
2. l_str := ' E27 '
UTL_FILE.PUT_LINE(L_FILE_POI,l_str,TRUE);
1 case : in XML file : "E27"
In 2 case : E27
When we write a XML file through editors , we have to define the constant within quote . is it?
Which one can i use ? Or any other way is there ..
Thanks and Regards
gopi

How can I generate a map file with LabVIEW?

We wish to use a product which inserts code into our executable to prevent tampering with it by crackers. The program, however, takes the executable file, as well as the map file (which is commonly generated by c++ compilers) and uses the map file to determine where in the exe the critical routines that need protection are at. I can not, however, determine how to create such a map file for a LabVIEW generated executable. Is there a special build option I need to invoke?

Yes, I'm familar with NI's licensing technology, having talked with someone (you, Dennis, I believe) about it before. The problem we have is our software is sold to factories in China where there are no internet connections. We have a physical key 'dongle' which must be present in order for the executable to be willing to run. However, it appears that people are taking the executable which LabVIEW creates and they are editing it, probably by using a a debugger and tracing to the the code which checks for the dongles presence and bypassing it. To my knoweledge, NI's products don't do anything to prevent this, right?
We found a company which sells a product that encryptes, checksums, etc... an executable file, but it needs to know the layout of functions in the exe in order to determine which areas to focus the obfuscation on. They were sort of matter of fact when they said it needs the exe and the map file, as if they expected any language which produced an exe could produce a map file.

How can I programatically identify PDF files with embedded images?

Our company has 27,266,949 .PDF files that we're planning to compress in order to save server space.
We don't want to compress any of the .PDF files that have embedded images as to not alter the image's state.
How can we programatically create a list to exclude from the compression process?

Ah, see told you we were new to this and no, my taxs already have enough digits to the balance.
Ok, so based on that, we should be able to use the preflighting tool to identify the PDF’s with images, factor them out, and then continue with lossless compression on the remaining balance.
That will give us the compression we need to save space, but also allow us to stand in the court of law (if the scenario was to ever occur) and proclaim that none of our medical images have ever been altered by compression.
Sound like a reasonable plan?

How can we load a flat file with very, very long lines into a table?

Hello:
We have to load a flat file with OWB. The problem is that each of the lines in the file might be up to 30.000 characters long (up to 1.000 units of information in each line, 30 characters long each)
Of course, our mapping should insert these units of information as independent rows in a table (1.000 rows, in our example).
We do not know how to go about it. We usually load flat files using table functions, but we am not sure that they will be able to cope with these huge lines. And how should we pivot those lines? Will the Pivot operator do the trick? Or maybe we should pivot those lines outside the database before loading them?
We are a bit lost. Any suggestion would be appreciated.
Regards
Edited by: [email protected] on Oct 29, 2008 8:43 AM
Edited by: [email protected] on Oct 29, 2008 8:44 AM

Yes, well, we could define a 1.000 column external table, and then map those 1.000 columns to the Pivot operator… perhaps it would work. But we have been investigating a little bit, and we think that we have found a better solution: there is a unix utility called “fold”. This utility can split our 30.000 character lines in 1.000 lines, 30 characters long each: just what we needed. Then we can load the resulting file using an external table.
We think this is a much better solution that handling 1.000 columns in the external table and in the Pivot operator.
Thanks for your help.
Regards
Edited by: [email protected] on Oct 29, 2008 10:35 AM

How can I create a zip file with LabVIEW?

I would like to compress my data (ASCII format) to an archive.
I use LVZlib.vi to compress and decompress data but I would like to be able to read the output file with a software archiver such as PowerArchiver/WinZIP.
Someone knows how I can create a file compatible with zip or gz standard format, thanks !

>> Yes but I have to install a special archiver (with ms-dos ommand line ability
>> such as pkzip,arc,rar,arj...) on the computer where I install my LV application.
Search for "gnu tools for windows" and get zip.exe, gzip.exe, bzip2.exe and others (even the source, if you like). These are about 50kB files that run in place (no installation) - easy to include in a distributed app. Oh, since I'm logged in I'll attach a couple, though I don't have the source on this machine).
Attachments:
bin.zip ‏67 KB

How can I save a XML file with JAXP1.1?

Dear All.
I write a program to create XML file with DOM model, but I can't know how to save it? My environment is JAXP1.1 and JDK1.3.1,I has been required not use other XML parser toolkits,only JAXP1.1.
How can I do? thank you.
Many person give me a idea the com.sun.xml.tree.XmlDocument, but I can't find the class in API document or JAXP1.1's packages. why?
what is it? How can i use it?
thank you very much.

The way to save an XML Document is using a Transformer.
To have access to a transformer use the packages :
import javax.xml.transform.*;
import javax.xml.transform.dom.*;
import javax.xml.transform.stream.*;
Then for saving your Document Object (named dXml) get a Transformer Object with the TransformerFactory Object :
TransformerFactory tf = TransformerFactory.newInstance();
Transformer t = tf.newTransformer();
Now you have got your Transformer Object, to save your Document Object use the method :
Document dXml = getMyDocument(); // this is your Document Object.
OutputStream osSave = getMySaveStream(); // this the OutputStream you need to save your Document.
try
t.transform(new DomSource(dXml), new StreamResult(new OutputStreamWriter(osSave)));
finally
osSave.close();
And your Document was now saved.

How can I move or delete files with PL-SQL???

I have Oracle 9i and Sun Solaris 5.8
I have a table (TABLE_FILENAME) with the files name in one directory. (I read the files name in a directory and put it in a table). I charge some files with external tables and then I have to move some fields to another directory and delete others files.
How can I delete files with PL-SQL and How can I move files with PL-SQL?
I have the names of files and the actions (Delete o Move) in a table (TABLE_FILENAME) (The files in this table are dynamics).

If you're using 9i then you will find that the new functions UTL_FILE.FCOPY and UTL_FILE.FREMOVE will allow you to do what you want. Check out the documentation for more details.
Cheers, APC

Developer: How can I let people open files with my program?

Hello Everyone,
I just finished my program for the Mac, and decided to make it an application.
I used Platypus to make my program into an application. Unfortunately when I try to open a file with my program (control + click on file + open with -> other), my application is grayed out and I can't select it. I see it there along with the other applications but I can't select it like I can Mail or TextEdit.
I read somewhere I had to use XCode to let people open files with my program but I have never used XCode and I have no idea how to do that. Any help would be appreciated.
Thanks,
Nick

You've posted in the wrong forum. This is the OS X Leopard Installation and Setup forum. You need to post your problem in the Developers forum. Also, since Platypus is not an Apple product, you should visit it's developers forum for assistance. The Apple Discussions is intended to assist users with problems and questions about Apple products only.
To use XCode Tools you need to install it from the Optional Installs folder on your OS X Installer Disc One. It comes with documentation. More assistance can be found at developer.apple.com.

How can I REPLACE original RAW files with JPG's and keep my 'Develop mode' edits?

An image describing my problem:
http://i.imgur.com/hcqMYkv.jpg
(Lightroom 5)
'edits' = Edits made in develop mode.
'CR2' = My RAW image file format.
I have existing CR2's with edits for them saved in Lightroom.
I want to replace the CR2's with JPG's, and do nothing else. I want those JPG's to inherit the CR2's edits, but I DO NOT want the edits to be permanently applied to the image.
If I export the CR2's (which have edits) to JPG's, the edits will be permanently applied to them. I do not want this.
If I export the CR2's to JPG's without the edits, I have no way of getting the edits back and will have to redo the work if I use that photo again.
Any solutions? I've been trying for a while and have no idea how to do this.
Q: Why not keep the CR2's?
A: I am uploading these files to an online host (S3) as my primary storage method and uploading CR2's takes way too long with my internet speeds. Furthermore, online storage costs money.
Q: Why not shoot with JPGs instead of shooting raw?
A: I do my initial edits with the raw files and then archive them as JPG's to save storage space. They won't be raw anymore if I apply future edits, but I still have the option of retouching them from the 'original' state and still have my old edits preserved.

Probably the best thing for you to do is simply use lossy DNG format (e.g. export as, or convert to..): raw data is re-formatted with jpeg compression (full-rez or reduced-rez), but all raw settings apply.
If you insist on trying to have a true jpeg file with (mostly) raw settings, then:
The simplest way I can think of to do it without a script or plugin:
* Reset the raw photo (consider preserving things that don't translate well, like profile-based lens corrections and white balance).
* Export jpeg
* Un-reset the image (e.g. using edit history or pre-reset snapshot).
* Sync settings from raw to jpeg (note: omit settings that don't transfer well, or that were not reset..).
* Optionally: Delete raw
To automate/streamline would require a script or plugin.

How can i run my .class file with out installing java ?

Hai friends..am new to java , plz help me any one.
I wrote a small program in java lang. i want to run this program in my friend's system , which is doesnt have java language .. How can i run this program in my friends system with out installing java language?
one of my friends told that ,it needs to copy the jvm in to ur directory where the java code is present . How can i copy the jvm from where to where ..?plz help me any one

Your friend will have to install the Java runtime if they want to run Java
programs.
Don't go copying files yourself - and especially don't go copying them to the
location of the Java code. After all, if your friend wants to run 42 different
Java programs they shouldn't have to have 42 copies of the runtime.
Just download and run the installer from this site:
http://java.sun.com/javase/downloads/index.jsp
Be careful to download the "Java Runtime Environment" not the JDK.

How Can I produce a Pro_Res files with 5.1 (6 channels of audio)

Similar Messages

Maybe you are looking for