How can I re-start when stuck on apple logo/spinning gear page for HOURS???

I uploaded 12 updates at once and when I went to restart, it became stuck on the page with the apple logo and spinning gear. Left it for hours and hours but no change. I have removed the battery and re-powered. I've also tried to use the install Disc 1... Urgh! Any solutions?
Thanks, Dot

If you are uploading anything it should not affect your machine unless your computer coincidentally failed while doing so. I am going to assume you mean you downloaded 12 updates.
I also assume you mean that when trying to start it after having removed and the replaced all sources of power it still will only get as far as the apple logo with spinning gear.
Are you holding the C key while starting it with the install DVD inserted? That should cause it to boot from the DVD after which you can use Disk Utility to repair the disk or to re-install the OS if needed.

Similar Messages

  • How to unfreeze ipod touch when stuck on apple logo

    It has been stuck on apple logo for over 24 hours. I have plugged it into my computer and it won't bring the ipod up. I have turned it off by holding the home button and the top button but when I turn it back on it goes to the apple logo again.  Help

    Try the remaining items of:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • IMac stuck on Apple Logo + Spinning gear

    I was having some pretty serious problems with my iMac, so I booted off the install CD and ran permission repair and disk repair. Everything seems to be OK now (SMART dhows "verified"), except that I cannot start from the hard drive. The iMac knows it's there and I can select it as startup disk (using either "option" startup or from within the install CD). I have no idea why it won't boot tho. The only think I can think is that I accidentally had my Leopard upgrade disk in once (the iMac came with Leopard) and double-clicked "install." I turned the iMac off before it booted though, so I would assume no harm done.
    Any help? It's getting frustrating.
    And yes, I've restarted with everything unplugged and have reset the PRAM.
    EDIT: Restarted in Verbose mode and got a "disk0s2: I/O error" followed by some "Level 3" comments.
    Message was edited by: Xian Rinpoche

    Hi Xian Rinpoche;
    Do you have a backup?
    You stated; "I turned the iMac off before it booted though, so I would assume no harm done.
    Shutting the computer off in the middle of an install has most likely totally corrupted your system.
    You might try an Archive & Install. If this procedure can find enough of the system remaining it might be able to salvage a system for you.
    If that fails then about your only other alternative is an Erase & Install. If you have no backup, this will cause you to lose everything.
    Allan

  • How can i fix white display only shows apple logo ond loading symbol

    How can i fix white display only shows apple logo ond loading symbol! Pls help me guys!

    shutdown your mac by holding power button. Then Hold CMD+V and press power button now it will start to show some text wait for few minutes and somewhere it will stop post that screenshot

  • How to reset ipod touch when frozen on apple logo

    hello
    i was upgrading to ios 6.1 on my ipod touch 4 g when it frozen
    but my my power button and home not working.
    is there anyway using me computer i can fix this
    how to reset ipod touch when frozen on apple logo
    with the problem i have
    thank you for your help.

    Hello,
    I am currently an owner of an Ipod Touch 4th generation. I see you are having problems with your Ipod Touch, so I will try to find a solution to your problem.
    Plug into your computer
    Go to ITunes
    Click on your Device
    Click on Summary tab
    Click on Restore
    Hope that helps!
    If none of the above solutions work, can you please respond back ASAP as I will try to find another solution to your problem (This might even help others with the same problem!)
    Cheers!
    Pizza98704

  • How can I stop iPhone 5s from blinking apple logo

    how can I stop iPhone 5s from blinking apple logo

    Hello tigersrock,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    Have a nice day,
    Mario

  • MacBook start up stuck on Apple Logo...what is wrong, how do I fix it?

    My friend has a new MacBook and when he starts it up, the apple logo appears in front of the white background as normal, but it just stays there...the black circular bars just spin and spin. He said this goes on indefinitely and at least over an hour. He also said at times he would get that dreaded question mark icon during boot-up, but then it would change to the Apple Logo and boot as normal from there on out. I tried shutting down and rebooting myself to no avail. Anyone know what this is or have any advice on what to do? Thanks!

    Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk.
    You could have some directory corruption. Let us know what errors Disk Utility reports and if DU was able to repair them.
     Cheers! DALE

  • IMac G5 start up stuck on Apple Logo

    My iMac doesn't start up all the way. I hear the bong then the Apple logo shows up with the spinning dial and that's as far as I get. I've tried leaving it on for awhile but all that happens is that the fans start to run and I have to shut it down using the power button. The computer does fall under the
    Extended Repair Program so I've already taken it in and had the power supply and logic board replaced hoping that it would solve the problem but it didn't (and I didn't have my computer for two and a half weeks). It worked okay for two weeks and then it wouldn't boot up again. Since then I've tried resetting the PRAMS and the SMU. I've also tried to run the hardware check from the OS CD and it fails before I can get any results and all repairs it tries to do also fail. I've even done an erase and install of the OS which got the computer running again for two weeks and then it won't start up again. I bought the iMac "used" so I'm trying to avoid having to pay for repairs if I can (forget about deep pockets because I don't have any at all right now). Does anyone know if this sounds more like a harddrive problem or is there another way for me to test the hardware? I'm writing this on my VERY reliable G3 but I miss my G5 so please help.

    Sorry I haven't posted for the last couple of days. I will take the computer back to the store tomorrow. I just wanted to try to find another way to test it before I took it in because if doesn't relate to the power supply or the logic board I'll have to pay Apple $85 just for diagnosing the problem (the 90 day warrenty on used Macs doesn't apply to be because I bought it from the prior owner and not Apple). I should have also said, in my original posting, that the other problems the computer had before I took it in the first time (i.e.-falling asleep, loud fans, distorted picture) have gone away since the new parts were put in and those symptoms were listed over and over again as being related to the power supply issue. I didn't notice anyone posting anything like my problem as an symptom of the power supply recall. I know I'm reaching for some magical answer but I thought I'd try. I'll let you know how it goes.

  • IMac not starting up/stuck on apple logo

    My iMac wasn't seeing one of my external hard drives so I thought I'd restart to try and fix
    It's now stuck on the apple logo with a spinning wheel underneath.. It won't boot to cd so I can't get into disc utility, I've tried an smc and pram reset but still got nothing..
    Got a feeling it's a HDD issue but am hoping not..
    Any suggestions would be greatly appreciated!
    Martin

    I tried all the usual options - safe mode, resetting PRAM, etc, plus a few others I'd not known prior - recovery mode, etc.  Nada.
    I couldn't even get mine to start from a CD.
    I went the Genius Bar at the Apple Store - they were able to run Disk Utilities, then Disk Warrior and fixed some minor issues, plus "blessed the hard drive" - in the end, however, I ended up needing the operating system reinstalled.
    The folks at the Genius Bar earned their rep for being extremely helpful.

  • Mac partiton not starting up, stuck on Apple logo.

    I am using a mid-2012 MacBook pro. I was using Yosemite when it started having issues.
    For the past few months I would have a grey loading bar on startup that would go away in a minute or less. This past week my Mac started running incredibly slow, freezing on every window. I tried to install updates in hopes it would fix it. However, after updating it would take minutes to boot, then it stopped booting.
    I tried RAM, hardware resets. Everything. I tried to reinstall Mountain Lion, now after the download/install all I have is the Apple logo and the cursor.
    However, the Windows partition works totally fine..
    Any ideas?

    I tried all the usual options - safe mode, resetting PRAM, etc, plus a few others I'd not known prior - recovery mode, etc.  Nada.
    I couldn't even get mine to start from a CD.
    I went the Genius Bar at the Apple Store - they were able to run Disk Utilities, then Disk Warrior and fixed some minor issues, plus "blessed the hard drive" - in the end, however, I ended up needing the operating system reinstalled.
    The folks at the Genius Bar earned their rep for being extremely helpful.

  • How can I modify the default styles or create new ones in pages for IPad?

    Hi, I have recently bought the pages for IPad App. It is nice, but I wonder How to modify the default styles or create My own ones...Can anyone help me?

    Unfortunately, pages on the iPad does not support editing styles. The mac version is an extremely powerful piece of software (I know someone who has recently completed their PhD thesis in it), but the iPad version has only a fraction of the features.
    The only word processor for the iPad I'm aware of that fully provides support for styles is UX Write - see http://www.uxproductivity.com (disclaimer: I've been involved with the development of this app). This is designed for the sort of high-end professional authoring tasks that you can do with Pages for Mac. Customisable styles are one of the most fundamental aspects of this app, and it provides extensive formatting options and the ability to define your own, new, custom styles.

  • How can I create a keyboard shortcut to export to pdf in Pages for Mac

    Can anyone explain how to create a keyboard shortcut that works in pages?

    Reluctant as I am to contradict Viking OS X, yes it is possible.
    This is for Yosemite, it is slightly different in other versions of OS X.
    Menu > Apple > System Preferences > Keyboard > Shortcuts > App Shortcuts > + > Applications > Pages > Menu Title: PDF… > Keyboard Shortcut > hold down whatever combination you want > Add
    As Viking says this won't choose Good, Better, Best but at least it gets you to that point. Unfortunately it always defaults to Good.
    NB that PDF… has to be typed with ALL CAPS and the ellipsis is option ; or copy from here. It has to be literally what is in the menu.
    You could make a more intelligent keyboard shortcut with 3rd party Apps like Spark [free] or QuicKeys or iKey or Shortcuts for Mac or Keyboard Maestro.
    Peter

  • What to do when stuck on apple logo

    My classic iPod had a low battery, and now, after trying to recharge (and reset), it is stuck on the Apple logo

    Hi two-rok,
    Welcome to the Support Communities!
    The article below may be able to help you with this.  Click on the link to see more details and screenshots. 
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Cheers,
    - Judy

  • New IPhone 5. Apple id is my email address. when I try to set up i cloud it automaticly changes my apple pass word to my provider pass word. How can I get it to stay my apple pass word?

    New IPhone 5. Apple id is my email address. when I try to set up i cloud it automaticly changes my apple pass word to my provider pass word. How can I get it to stay my apple pass word?

    Thanks for the flag J.K. - they contaced me and solved my problem.  On this account (which I created just to ask this question), I log in with my email rather than my user name (mtalldud). On the account that I was having trouble with, they told me to use my user ID instead of my email to log in and it worked. This is a bit confusing and seems a bit inconsistent but at least I don't need this temporary account any more to get into this community and find answers!

  • Ipad stuck in apple logo reboot loop to home page and then goes off

    my ipad2 stuck in apple logo to home page rebooting loop and cant charge to 100%

    Mine is doing the same thing and won't charge.  It stays at 2%....this happened suddenly.

Maybe you are looking for

  • How to put cursor in a text field

    hi, I have a text field in my jsf page.By default I want to put the cursor into this text field.when a letter is entered into this text field,the data table below this text field must change depending upon the value entered into the text field.After

  • Mac OS X Server 10.8 and Wiki Code Snippet Security Settings

    I want to disable the embed security settings in Server's Wiki Service because with the default settings you can't embed anything on to pages, which makes it a lot less useful. I know to do this you change: /Library/Server/Wiki/Config/whitelist.plist

  • Editing high resolution photos based on lower ones?

    Hi Photoshopper, I have taken 500 photos (in highest resolution, JPG, each ~5 MBytes) and want to crop them individually. With fewer ones I opened eg 30 at once, made my changes (eg cropping) and exported/saved these images via an action. But this me

  • Convert .xls to .numbers?

    I am probably missing something easy but just can't think of it. I have been trying to open an .xls spreadsheet on my iMac.  Numbers says the file can't be opened it is encrypted.  How can I open this file and convert it to a Numbers document? I am u

  • How to sound like a chimpunk on imovie08

    I realize that there is no way i can make my voice sound like a chimpunk on imovie 08 so i recently transferred my audio to garage band and did that successfully on that program so how do i save it now as a video file in which i can post it on youtub