How can I read the trace data into LabVIEW for E5071B

HI
I am setting up the measurement using vector network analyzer (VNA) E5071B controlled by NI 488.2. How can I read the trace data into LabVIEW and display on the graph? If anyone having an idea or know well about this process please give me the suggestion, I will much appreciate it.
Many Thanks

You want to start with the driver
In case you do not know it, you can do the driver search in LabVIEW from Tools>Instrumentation>Find Instrument Drivers. You might also want to bookmark the Instrument Driver Network for information on what a driver is and how to use it.

Similar Messages

How can I read the trace data from Agilent(HP)8510C in C++ using NI488.2 and PCI-GPIB ?

Hello! I am trying to develop an application in C++ for measurements with Agilent(HP) 8510C network analyser using NI488.2 and National Instrument's PCI-GPIB card. In HPBASIC the trace data is read using OUTPDATA command which contains PREAMBLE, SIZE and then the data string in real and imaginary pair for the required points. The ibrd function gives data only for one point. Kindly guide me how I can read the whole trace and and separate out the real and imaginary data values. Regards, kapil

Hey Kapil,
It seems that in HPBASIC you were using an instrument driver for the 8510C. OUTPDATA is not a native HPBASIC function. National Instrument has similar instrument drivers for LabVIEW and CVI.
http://zone.ni.com/idnet97.nsf/9b2b33e1993d877786256436006ec498/7b235254f3881ddb862568ab005fbd2e?OpenDocument
http://zone.ni.com/idnet97.nsf/9b2b33e1993d877786256436006ec498/24ca7db880ab78ae862568ab005fbc0f?OpenDocument
For example in the CVI instrument driver you will find a source file called hp8510.c. In the source code you will find a function called hp8510c_dataInRaw that sounds similar to the function that you described.
Note that this example is designed for CVI, but it is possible that you could extract the information you need for C++. If
you had a copy of CVI you could just add the files downloaded from the instrument driver to a project and then compile and run the project. It already contains a ready to run example that allows you to capture data and use your instrument.
If you want try CVI you can download an evaluation copy on-line at http://ni.com/lwcvi/launch.htm.
I hope this helps out,
JoshuaP
National Instruments

How can we upload the Time data into SAP system

Dear all,
ingeneral which method we can use to read the Time data and how can we upload that data into SAP system. Please any one can answer this asap.

In the recent project that I have done.. the time data is uploaded from the external time recording machine.. in the form a file...
The other way is through CATS... which in turn will populate the time entries as per hte work schedules... and will explicitly have to populate the deviations to the work scheudle by going through transactions..
Please reward the points if it is helpful...
Regards,
Suvan,
Yash Technologies Pvt Ltd, Hyderabad.
Message was edited by:
Suvan

How can I read the raw data by other program?

How can I use other program (such as C, MATLAB) to read the raw data acquired by biobench (*.bb)? Since the export function of biobench 1.0 is not convinient, I hope that I can read the data directly by decompressing the *.bb file. In other words, can one tells me the format of *.bb file?

Take a look at Top BioBench Support Solutions>>BioBench Support Files>>bbfileio.zip,here is the link: http://digital.ni.com/public.nsf/websearch/3ABE21AD33DA83B0862569B400810BAE?OpenDocument

How can I read the complex data for the stand-alone offline time-frequency analyzer, which only accept real data, that is one-column or one row data ?

I have real complex data (i,q data) for the ISAR imaging. I don't have any knowledge of Labview programming. I bought this signal processing toolset to use only stand-alone time-frequency analyzer.

In the LabVIEW functions palette on the block diagram, if you go to Numeric>>Complex you have to VI's that splits a complex number into rectangular or polar components. Click on the help file for those VI's to see the kind of datatypes you can wire to them.
Cyril Bouton
Active LabVIEW Developper

How can we read and write data into plist using javascript in a html5 widget to be implemented into iBooks?

I had been trying to read from a plist to get file names of data files and it works fine when i run it in safari but after making its widget and putting it into iBooks it doesnot works. Please tell me any new method to read p list or correct my function if there is any correction. my function is following.
function plistread(n)
          if (window.XMLHttpRequest)
               xhttp = new XMLHttpRequest();
           else
        xhttp = new ActiveXObject("Microsoft.XMLHTTP");
               xhttp.open("GET", "Spell_Check_3.plist", false);
    xhttp.send();
    xmlDoc = xhttp.responseXML;
    var x = xmlDoc.getElementsByTagName("dict");
    var imgnamex = x[n].getElementsByTagName("string")[0].childNodes[0].nodeValue;
    xlength=x.length;
          return imgnamex;

See i need to access a plist file in my html5 widget, i implemented it in java script but it's not working so is there any other way to take out values from a plist file.

How can I read the serial data from my mouse on com 1?

I just started using LABView so please have patience with me!
An error message says the resource is valid but VISA can not open a session with the device, in this case a Roller ball cannected to the comm port. Obviously windows is already using this device, I don't want to over ride it just monitor it.

If you are using LV 7 the attached VI demonstates how to use the new functions that are now included with LV.
I just stumbled across these earlier today and they worked right out of the box.
Have fun,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
mouse_position.vi ‏90 KB

How can i read the data fromtext fieldsin the form of bytes??

Hi friends,
How can i read the data fromtext fieldsin the form of byte string while using Socket connection.
I have two text fields. i need to send the data from the textfeilds to the server using a byte string.
Can anyboday help me???
KK

Does <cfdbinfo> work for Access DBs?
You might be better off asking this on a MS Access forum. It's more of an Access issue than a CF one.
Adam

How can I read the image from database into form

hi everyone
if I have table like this
create table test
(id number(10),
pic long raw);
in this table record
in form If I have block non database
how can i read the image into non database item
I try with this code but no good
select pic into :photo from test where id=5;
photo its non database item kind image
how can i invoke image into item
thanks alooooooot

Hello,
You can't select image with select query. You need to create another database block from test table which has item binds with database pic column. Now in where condition in test block's property you have to write id=5. Change test block's properties UPDATE ALLOWED, INSERT ALLOWED, DELETE ALLOWED to NO. Only Query allowed property set to YES.
Now in your particular trigger write the code
GO_BLOCK('test');
Execute_Query;
please mark if it help you or correct
Regards,
Danish

How can i read local excel file into internal table in webdynpro for abap a

Could someone tell me how How can i read local excel file into an internal table in webdynpro for abap application.
thank u for your reply

Deep,
File manuplations...............................
1. At the presentation level:
->GUI_UPLOAD
->GUI_DOWNLOAD
->CL_GUI_FRONTEND
2. At the application server level:
->OPEN DATASET : open a file in the application server for reading or writing.
->READ DATASET : used to read from a file on the application server that has been opened for reading
-> TRANSFER DATASET : writing data to a file.
-> CLOSE DATASET : closes the file
-> DELETE DATASET : delete file
If file is on the local PC,use the function module GUI_UPLOAD to upload it into an internal table by passing the given parameters......
call function 'GUI_UPLOAD'
exporting
filename = p_file
filetype = 'ASC'
has_field_separator = '#'
tables
data_tab = t_data
p_file : excel file path.
t_data : internal table
<b>reward points if useful.</b>
regards,
Vinod Samuel.

How can i get the meta data from database?

Hi, all java and db experts,
I need to write a tool to generate java file which will be used to hold the resultset of a stored procedure of Oracle. Is there any API call or tools to connect to db and then get the meta data of the return cursor instead of reading stored procedure definition on my own?
Please help, thanks a lot.
Hanna

if i execute a Oracle stored procedure, the resultset of a cursor is returned. It's easy to know the meta data at the runtime.
However, could i get the meta data about the resultset of a cursor before runtime? Such as by connecting to the database and ask it about meta data of a specified stored procedure?
Is it feasible?
DatabaseMetaData dbmd = conn.getMetaData();
ResultSet rs = dbmd.getProcedureColumns("", "%", "SP_NAME", "%");
while (rs.next()) {
String colName = rs.getString(4);
int colType = rs.getInt(5);
int colDataType = rs.getInt(6);
int colPrecision = rs.getInt(8);
int colLen = rs.getInt(9);
int colScale = rs.getInt(10);
long defaultValue = rs.getLong(11);
But what i get is a list of stored procedure parameters. In oracle, cursor is IN OUT parameter . How can i get the meta data about the resultset of cursor?

How can I restore the game data from an old ipod touch to a new one?

How can I restore the game data from an old ipod touch to a new one?

Restore it from the backup of the old ipod.

How can I convert the volume directory into a single file installer?

How can I convert the volume directory into a single file installer? I would like to hide all the miscillaneous files that I don't care for and be able to have the installer double click a single file and have it automatically install.

On the second prompt screen when prompted 'What kind of self-extracting Zip file file do you want to make?'
Are you choosing the second option (self-extracting Zip file for software installation)?
I have a word file that I created to help me remember - is there anyway to email it to you?

How can I read the bootstrap files and extract the fragment-URLs and fragment-numbers in plain text?

How can I read the bootstrap files of any HDS Live stream and extract the fragment-URLs and fragment-numbers in plain text?
Could it be that it is some kind of compressed format in the bootstrap? Can I uncompress it wirh f4fpackager.exe? Could not find any download for f4fpackager.exe. I would prefere less code to do so. Is there something in Java of JavaScript, that can extract the fragment-numbers?
Thank you!

Doesn't sound too hard to me. Your class User (the convention says to capitalize class names) will have an ArrayList or Vector in it to represent the queue, and a method to store a Packet object into the List. An array or ArrayList or Vector will hold the 10 user objects. You will find the right user object from packet.user_id and call the method.
Please try to write some code yourself. You won't learn anything from having someone else write it for you. Look at sample code using ArrayList and Vector, there's plenty out there. Post in the forum again if your code turns out not to behave.

HT204150 i have deleted all contacts in icloud but still have them on my iphone (which is backed up as well to iTunes) how can i restore the iphone data to the iCloud so it will resend it to my mac book and iPad?

i have deleted all contacts in icloud but still have them on my iphone (which is backed up as well to iTunes) how can i restore the iphone data to the iCloud so it will resend it to my mac book and iPad? I have switched my iphone to airplane mode so it is not connected to the internet and so icloud can not wipe it at the moment.
thanks roy

There's a menu choice (I think under "Files") that lets you sync purchased items on a device back to itunes. Look for that.
iCloud does not store music. If you want to do that you'd have to subscribe to itunes Match, but to get music to the match servers, you need the music in the itunes library on your computer.

How can I read the trace data into LabVIEW for E5071B

Similar Messages

Maybe you are looking for