How can I record the audio for a radio station I'm streaming LIVE?

How can I record the audio for a radio station I'm streaming LIVE?
I don't want to record the sound in my room, but only on the sound I'm streaming

Grane Duke wrote:
To reduce or make the room noise as low as possible (to get the best audio recording), I recommended the OP to try to record the radio live streaming audio in a silent room. Does it makes any sense to you....??
No. Preferably one records using direct input.
Your comment It doen’t matter whether he/she is recording the audio from the macbook or any external speakers because if the room is noisy than obviously the ambient room noise will be recorded. is pretty silly really. Think about what you just wrote.
And you do have a bad habbit in your posts of over using ???????? & !!!!!!!!!!!!!
One is enough.
Cheers
Pete

Similar Messages

How can I boost the audio for a quiet clip?

I am using a video that someone else shot, and the audio is very low. They did not use a microphone, just the one on the camera, so the lady talking is very quiet.
I pulled the yellow audio bar up all the way, but it is still too quiet. Which audio effects can help me boost the volume more?
I've attached a screen shot of the audio effects I have available to me. I'm not quite sure what some of these effects actually do...
Please let me know if any of the effects I have would help me...or, should I just copy & paste my audio track several times? (I just thought of that...)
Thank you!

This article covers several ways to attenuate/adjust Volume of an Audio Clip: http://forums.adobe.com/message/3472343#3472343
Good luck,
Hunt

How can I record an Audio Instrument (saxophone) and listen to a reference track at the same time?

How can I record an Audio Instrument, and listen to a reference track at the same time?

Are you using an external audio controller or the line-in and headphone jacks on the side of your computer? You shouldn't have an issue using headphones when you're recording through the line-in but you may want to make sure you have monitoring on and it's going to the right place.
If you're using an external audio controller, try making an aggregate device combining the controller and the "built-in output" into the same device. Go to Applications/Utilities/Audio MIDI Setup, click the "+" sign at the bottom left to make a new device and check the "use" boxes to the left of the physical devices you want to use as part of that aggregate device. That is how I use the computer's speakers or headphones to monitor my input as opposed to only being able to use the output on my audio controller.
Now that I see some of the questions on the side of this page I realize that the 13" MBPs seem to have only one combined input/output jack... That is an incredibly stupid feature. What on Earth could possibly justify that design decision? I suppose if that's the problem you're having you'll have to buy some sort of splitter (if they even make them) or get an external audio controller like an Apogee Duet or something along those lines. I would be furious if they combined those two jacks on all of the MBPs.

How can we do the validation for non visible records in table control.

Hi Experts,
I have a table control which displays list of material details. I have a button to upload the material details from excel file to table control directly. I have to validate all the customers which are exist in the table. But my item (Material) table control displays only 5 rows i.e only 5 entries are visible in module pool screen. The validation is done for 5 records only in PAI event, but i need to do validation for rest of the records too (Which are not visible on items table), if validation fails then needs to display error message.
How can we do the validation for non visible records in table control.
Regards,
Bujji

Hi,
try validating material before displaying it in table control...'
Rgds/Abhhi

How can I record an audio sound and convert it to a ringtone?

How can I record an audio sound and convert it to a ringtone?

Record your voice using iPhone (for ringtone only 35 secs or under are valid), sync iPhone with iTunes.
In iTunes the recorded voice is listed under Music as some_numbers.m4a.
Right click on the item and choose Create AAC version.
Drag the converted voice onto the desktop.
Delete the voice copy in iTunes. (important step)
On desktop, rename the some_number.m4a to something_more_intelligent.m4r
Drag it back to iTunes and you will find it under Tones.
Now select it (for sync) and connect your iPhone, do a sync.
If everything works out, it will be in Settings > Sounds > Ringtone.
Now choose a contact you want to assign this ringtone, tap Edit and add the ringtone.
Hope this helps.

How can I record the MASTER BUS?

We use Audition to record programs for airing. I would like to record the output of the effects rack (after applying a limiter, etc). How can I record the output of the Master or other Bus?
George Weston
KSFR-FM
Santa Fe, NM

You don't actually record it as such - you mix the master output down to a new file, which opens in Edit view where you can save it.
So in Multitrack view, that's Edit>Mix Down to New File, and select the particular option you want. So if you only want part of a session mixed, then make an appropriate time selection, and select that option.

How can I change the audio? On tv appear (english/portuguese) but I don't know how change

How can I change the audio no Apple tv? on the film appear (english/portuguese), but when the film begins the audio is in english and I want to change for portuguese.

Hold down the select (middle key in the ring) for several secs and chapter/audio options should appear if available.
AC

How Can I record the user's logging time?

How Can I record the user's login time?I create a table containing some column such as record_id,username,start_time,end_time,period.How can I create a process on logging in to record the start_time and a process on logging out to record the end_time?
Thanks for any help.

you can refer to the name of the currently logged in user using :APP_USER. to capture the login info, i'd add an htmldb process to my app that fired "After Authentication" and simply inserted :APP_USER and sysdate into my logging table. for the logout case, you could change the "Logout URL" of your current authentication scheme to one that does whatever it's currently doing plus the logging. so i Logout URL of...
wwv_flow_custom_auth_std.logout?p_this_flow=&APP_ID.&p_next_flow_page_sess=&APP_ID.:101:&APP_SESSION.
...and i changed it to something like...
my_schema_name.my_logout?p_user=&APP_USER.&p_app=&APP_ID.&p_session=&APP_SESSION.
...where my_logout was...
create or replace procedure my_logout(
p_user in varchar2,
p_app in varchar2,
p_session in varchar2) as
begin
insert into my_logging_table values (sysdate, 'logged out as '||p_user);
wwv_flow_custom_auth_std.logout (
p_this_flow => p_app ,
p_next_flow_page_sess => p_app||':101');
end;
...and things worked fine.
hope this helps,
raj

How can I display the range for LastFullMonth in the header of a report

How can I display the month for LastFullMonth in the header of a report run in the past so that a report that ran sept 1 2009 selecting data for LastFullMonth (august 2009) displays sept 2009 in the header even if there is no data selected by the report?

Good,
Sometimes I answer these questions and completly miss it....
( lack of understanding on my part )

How can we specify the Mailbox for Notes?

In Mail.app, how can we specify the Mailbox for Notes (where the new notes will be resided)? It is now 'On My Mac'. I wish to change to my IMAP Mailbox so it sync with my iPhone by just checking email (not by syncing on iTunes).
Thanks in advance.
Message was edited by: Ekapon

You could use the DecimalFormat or NumberFormat to do the job.
double number 1234.567;
DecimalForamt df = new DecimalFormat("###.##");
String s = df.format(number);or
double number 1234.567;
NumberFormat nf = NumberFormat.getNumberInstance();
nf.setMaximumFractionDigits(2);
/* if needed.
   nf.setMaximumIntegerDigits(value);
   nf.setMinimumFractionDigits(value);
   nf.setMinimumIntegerDigits(value); */
String s = nf.format(number);I didn't test the codes but they should work. For more information, please consult the documentations.

I no longer want to merge my work laptop with my icloud account on other devices. How can I change the setting for the laptop?

I accidentally agreed to set up my work laptop icloud account to merge with my other devices and want to keep the work information separate. How can I change the setting for the PC at work?

Sign out of iCloud.

How can I change the password for the USER in SAP.

How can I change the password for the USER in SAP?
also I want to change the Language and date Format b/c it's displaying in German language..

Hi,
Assuming that User has already his/her user-id and password, and now he/ she wants to change it.
select the client and provide Log-in credentials. Now, instead of 'ENTER' there is one Tab: 'New Password' (up, left hand). Click it.
Now, system will ask for new password to change.
If you are asking from Basis point of view, then T.code: SU01 - User Maintenance.
Enter User's id and Click Change icon.
It will lead to Page: Maintain User.
Here, Select tab: Logon Data
There is a Sub-Tab: Password.
Here, key-in change password and SAVE.
For Language and Date format, contact your Basis-Personnel.
Best regards,
Amit

Hi, how can i break the value for a row and column once i have converted the image to the array???????

Hi, I would like to know how can i break the value for a row and column once i have converted the image to the array. I wanted to make some modification on the element of the array at a certain position. how can i do that?
At the moment (as per attachhment), the value of the new row and column will be inserted by the user. But now, I want to do some coding that will automatically insert the new value of the row and the column ( I will use the formula node for the programming). But the question now, I don't know how to split the row and the column. Is it the value of i in the 'for loop'? I've tried to link the 'i' to the input of the 'replace subset array icon' , but i'm unable to do it as i got some error.
Please help me!
For your information, I'm using LABView 7.0.

Hi,
Thanks for your reply.Sorry for the confusion.
I manage to change the array element by changing the row and column value. But, what i want is to allow the program to change the array element at a specified row and column value, where the new value is generated automatically by the program.
Atatched is the diagram. I've detailed out the program . you may refer to the comments in the formula node. There are 2 arrays going into the loop. If a >3, then the program will switch to b, where if b =0, then the program will check on the value of the next element which is in the same row with b but in the next column. But if b =45, another set of checking will be done at a dufferent value of row and column.
I hope that I have made the problem clear. Sorry if it is still confusing.
Hope you can help me. Thank you!!!!
Attachments:
arrayrowncolumn2.JPG ‏64 KB

I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

Go to the bottom of the page, click the flag, then select your country.

How can we write the code for opening the command prompt and closing the

how can we write the code in java for opening the command prompt and closing the cmd prompt from eclipse (cmd prompt should close when click on the turminate button in eclipse)

rakeshsikha wrote:
how can we write the code for opening the command prompt and closing theBy typing in Eclipse (which you seemingly have)?

How can I record the audio for a radio station I'm streaming LIVE?

Similar Messages

Maybe you are looking for