How can I register for a jabber video account

Anybody figured out how to register for the above when you already have a Cisco login?
I have three e-mail addresses which, over the years of CCNA and network support, I've used to register with Cisco. Now, when I try to register for telepresence, it tells me the addresses are in use. There must be a way of extending an existing Cisco account to access Jabber (or am I being naive?).

Hi Steve,
Free Cisco Jabber Video accounts can be obtained from www.ciscojabbervideo.com.  If your email accounts are already in use, then use the forgot password link to reset your password.
If you are referring to a different product of Jabber Video, please reference the link you are inquiring about.  It's possible you may have to call TAC for further assistance, but please specify further if the above is not what you are looking for.
Regards,
Jason

Similar Messages

  • No incoming video and audio for new Jabber video account

    We have registered a couple of jabber video account, but they all have the same issue, couldn't successfuly establish a call.
    However, it seems working fine for old jabber video account.
    Anyone can help?                  

    I have no incoming video for my Jabber account. I was doing some testing for one of my customers who had this issue. Here is what I found. I have a EX90 registered to VCS on a corporate network. I have my Jabber Express client I downloaded and installed. When I call to or from either I don't receive video on Jabber Express but I get audio from the EX90. I get Audio and video on the EX90 from Jabber. What I found when I was troubleshooting is that if you leave the call up for 30 seconds I finally start recieving video on Jabber from the EX90. After testing a few calls this happened every time. I then checked the call settings on both sides during the call. Both endpoints are experiencing 50% or so packet loss until the video started being sent to Jabber and then the packet loss dropped to 0. So I would assume there is something wrong on the Jabber Express end that is causing a 30 second or so delay when the video is being sent through the proxy. Has anyone else had this exact issue?

  • HT5687 Its 1 year 4 months of the purchase.  How can I register for the warranty for now.  Please help.

    Hi,
    I bought MacBook Pro in Sep/2012.  I did not buy the warranty at the time of purchase.  Its 1 year 4 months of the purchase now.  
    I lately came to know, that we cant register for apple warranty if we dont purchase it earlier.  
    However I want to get my Mac covered under the apple warranty.  How can I do so.  Please guide & help.
    Thanks,
    Anita

    This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
    If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running a program at the instance of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
    Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
    You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking  anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    clear; shopt -s extglob; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='User %s%%\t\tSystem %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; R () { o=; [[ r -eq 0 ]]; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */   /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o="${o##+( )}"; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=`system_profiler SPDiagnosticsDataType | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; egrep -q 'No th|pms' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* && ls *.{crash,hang,panic} | tail | awk -F_ '{$NF=a[split($NF,a,".")]; print}'`; Pm "${D[$i]} diagnostics"; done; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; [[ o -lt 5120 ]] && Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 90 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Pm "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process $s of user ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process $s of user ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; for d in {/,}L*/{La,Priv,Sta}*; do o=`ls -A "$d" | egrep -v '^(\.DS_Store$|com\.apple\.)'`; Pm "$d"; done; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep :`; Pm "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist ! -exec sh -c 'plutil -s "$1" >&-' {} {} \; -print`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
    Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
    If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
    If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
    The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There is no indication of progress until it's done. Wait for the line "[Process completed]" to appear in the Terminal window. If you don't see that line within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
    When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
    Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • HT2534 How can I register for an Apple ID without having a credit card?

    Hi guys!
    So this is my problem:
    I just bought a new iPod Touch 4th Generation - 32gb last week and I am having trouble in registering for an Apple ID. I don't have any credit cards with me and I don't plan on having one soon. So far, the choices for payment method are Visa, Mastercard and AmEx. I'm from the Philippines. Please help!

    If you only want the free apps, take a look here:
    http://support.apple.com/kb/HT2534
    Read the steps carefully as the order in which you follow them is  critical. Note that you can do this only when creating a new Apple ID. You cannot use an existing ID. 
    You will of course not be able to get anything other than the free apps without entering in some sort of payment method (credit card, prepaid iTunes card, gift certificate, etc.)
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • How can I register an iPod to my account that is currently registered to another one?

    I bought an iPod Classic, 1.3 version, from a friend and it is registered under another account. I can't get in touch with this person to get the account password so I can sync my iPod to my account. I want to re-register the iPod under my account. It doesn't matter if all the music is lost in the proccess. Does anyone know how I can do this?

    You don't HAVE to register the iPod with your account, but here is the link to register the product with Apple under your info.
    https://register.apple.com/cgi-bin/WebObjects/GlobaliReg.woa
    Simply connect the iPod to your PC and restore it via iTunes.  This will associate the iPod with your iTunes library and content.
    Restoring iPod to factory settings
    B-rock

  • How can I register my ibook in paid account from Mexico

    If I open a paid account, apple asks me for a tax id, but the thing is that I am from Mexico, so what can I do to sell my ibooks from Mexico in the iTunes Store.

    You get a tax id like everyone else, it doesn't matter what country you are in.  Just read the FAQ:
    http://www.apple.com/itunes/content-providers/book-faq.html

  • How can i make a free facetime video call? There's always appearing that my provider might charge for the call?

    How can i make a free facetime video call? There's always appearing that my provider might charge for the call?

    If you make a call then tap the Facetime button to connect Facetime, the duration of call up to Facetime connection will be charged under your regular airtime.  However, duration during facetime conversation will not consume airtime.
    But if you tap the Facetime button on the Contact Page, then the whole duration will not consume airtime.
    For Facetime to work, both parties must be connected to wifi.

  • How can I register a number with iMessage for my iPad2?

    I've got a 3G card with a mobile phone number. How can I register this number with iMessage?

    Good afternoon;
    So to confirm your posting,
    lllaass wrote:
    If it is a number/email address yu are calling:
    - Is it entered in a contact in your Contact app.
    - Does the person have the number/email address registered as their messaging number/emai addrrss.
    the other person needs to register thier information?

  • How can I determine the type of video out connector I need?

    Howdy,
    I have a white macbook purchased Jun/2008. I want to connect to a TV but don't know what adapter I need. How can I determine the type of video out jack my macbook has?
    System Profiler says the model identifier is "MacBook 4,1". Under Graphics/Displays the only thing it says about the "Display Connector" is that no display is connected. Too bad it doesn't tell me what type of connector it is. If I knew the name of the connector I'd probably be home free. But it seems like every macbook model has a different video connector (since the state of the art has advanced over the years) and I haven't been able to keep up with the names.
    Now, I have a 6" long adapter that will convert this connector to VGA. And searching the Apple store for VGA adapters, the existence of mine says my connector is might be one of "Mini DisplayPort", "Apple Mini DVI", "Apple DVI", or "Apple Micro-DVI". But then there is also the connector at
    http://store.apple.com/us/product/M8639G/A?mco=MTY3ODQ5OTY
    and that looks like the one I have. But unlike the other adapters, this one is just called a "VGA Display Adapter". Does the connector have a name? How can I find adapters that have that same connector?
    I know I could use the adapter I have, plus a VGA to VGA cable, to hook up to a TV. But the quality of the VGA signal is poor in the digital world. My goal is to hook up to the TV via HDMI. Is this even possible? By which I mean, will my macbook generate the signals necessary to be able to be converted to HDMI?
    Thanks for any help,
    Zebulon T

    Thanks, Ded,
    You're right, the cable that I have won't work. I't from my previous, 2004 iBook. This is pretty embarrassing... I looked at the cable but didn't bother to try plugging it in.
    Looking at the close-up picture of the Mini-DVI to VGA adapter, that does look like the right connector. So I have Mini-DVI, and the other apter you pointed to can convert this to DVI. I'll take a look to see what makes the most sense, connector wise, downstream from that.
    Thanks very much.
    Zeb T

  • How can I register the iTunes without a credit card? No "None" can be selected but only different kinds of credit cards. Thanks!

    How can I register the iTunes without a credit card? No "None" can be selected but only different kinds of credit cards. Thanks!

    Get an iTunes gift card & redeem that in iTunes using your existing Apple ID.
    Then the option for none, regarding a credit card should appear.

  • HI GUYS, HOW CAN I REGISTER THE ADOBE CREATIVE CLOUD ON MY MACBOOK AFTER REGISTERING IT ON MY IMAC THX TO ALL

    HI GUYS, HOW CAN I REGISTER THE ADOBE CREATIVE CLOUD ON MY MACBOOK AFTER REGISTERING IT ON MY IMAC THX TO ALL

    I am not clear on what you mean by "register" but if you mean you want to install it on another machine then you just need to install it the same way you did for the first machine.

  • Somebody uses my apple id for facetime on his iphone how can i remove his phone from my account?

    somebody uses my apple id for facetime on his iphone how can i remove his phone from my account?

    Last Spring I received a couple of emails to an alias I set up a long time ago under mac mail with mac.com - not my main ID - at mac.com.   The mail had the Icloud extension.     I just deleted it.
    I then received a couple of e-mails forwarded to the same alias that came from a non-apple account that led me to search to see if the company was legit - it was.     Using a non-apple hidden account I sent that non-apple account an email informing them apparently when they registered the ID or alias as an ICLOUD extension - apple did not check for duplication in accounts or aliases that were not in the Icloud.
    I also sent feedback to Apple telling them to fix it and apparently they did - along with the person who replicated my alias.
    On this site there were a number of postings from people who also had problems with mac mail and Icloud who resolved it by contacting Apple and getting the accounts cleared up.

  • I bought iPad air. How can I download for free the app : iPhoto, iMovie, Pages, Numbers and Keynote?

    I bought iPad air. How can I download for free the app : iPhoto, iMovie, Pages, Numbers and Keynote?

    Before you can download free apps:
    1. Make sure you are using IOS 7 (ignore)
    2. Make sure your iPad is registered in My Support Profile.
    https://supportprofile.apple.com/
    3. Try downloading again; it should be free.
    If you need serial number, it's here:
    Settings>General>About

  • How can I create a custom sized video in PP cs6?

    How can I create a custom sized video in PP cs6? I have read references to the "desktop" setting but cannot find it. I am trying to find the right settings for a 1080 px x 486 px video (which I need to qualify for hi res on Vimeo).  I need to output a 450 x 1000 px video for
    my website. Ideally, I'd like the sequence settings as well as the output settings. I am using still shots- no actual video.

    What are the exact properties of the still images, particularly the pixel dimensions and pixel aspect ratio (PAR).* The letterboxing (black bars top & bottom) is most likely a result of a mismatch in these settings. If this is the case, then the easiest fix is to make sure not only the dimensions but the PAR match.
    Say for instance your source images are 1000x1000 with a PAR of 1.0 (square pixels) and your sequence is set also set to 1000x1000 but with the PAR set to D1/DV NTSC (0.9091), the result would be letterboxing as seen here:
    *if you're not sure about the PAR of your source images, right click on one of them in the Project panel and select Properties.

  • How do people register for more than one person on a form?

    We had a lot of complaints last year from organizations who sent several employees to our training.  It took a long time for them to process these one at a time.  How do people register for more than one person on a form?

    Hi thearcca,
    This entirely depends on the form you create, you can add multiple choice button and ask for the no. of employees the organization wants to register.
    Also, you can add corresponding text field for the names.
    Thanks,
    Vikrantt Singh

Maybe you are looking for

  • IMessage not working on iPad

    In the house we have 3 iPhones and I have a iPad 2 they all share the same iTunes acct. and we have wi-fi at home. I cannot send iMessage from my iPad to my daughters iPhone in the other room? My iPad is wi-fi only.

  • Is there a way to add custom functions to the Report Generation Toolkit?

    I would like to be able to delete unused sheets from an Excel report without having  to reopen the file (and Excel) to do it using ActiveX. It is probably not possible since the NI_Excel.lvclass is locked but maybe there is some other way to do it. B

  • What is the use of valuation view?

    hi , could you brief me about valuation view and its purpose? regards

  • Stopping sounds in an embedded MC

    is there a way to stop the sounds of a movieClip (with embbeded video) and still keep the clip playing?... I know i've seen this on the videoGallery example, but i can't make their method work... ><

  • EA1 - SQL History Timestamp format

    Feature Request "SQL History Timestamp - NLS Date format" (Use the current NLS Date or Timestamp Format preference for formatting the Timestamp displayed in the SQL History window) is listed as Scheduled for 1.5 but has not been included.