How can I remove print margins when manually setting them to zero doesn't work?

I'm trying to print a web page that I've created with a custom paper size of 4.5x10.25 inches. I want the page to be printed right to the edge of the paper, with no margins at all.
I've been reading for a few days and the best thing I can find is to use Mac's Page Setup dialog to create a custom paper size and custom margins, which I've done and set to the default for all of my printers. (Hopefully I'm able to post links to images --> http://i.imgur.com/kVbOZLk.png). No matter what I do though I can't get the margins to go away. There's always always always a .75 inch margin when I print and when I print preview (Again, hoping I can post links to images --> http://i.imgur.com/cxlVS8o.png). Just to note: The same thing happens printing other websites and documents (i.e it is not a problem with my website).
Things I've tried:
I've read that the margins are only visible in print preview and printing the page will remove them. This didn't work.
I've tried tricking the system by setting my margins to 0.01 inches
I've tried adjusting the website to not be exactly the size of the page (I made it smaller) and the margins were still there.
I've set "print.print_extra_margin" to 0 in Firefox's about:config page.
I've tried a different printer.
I've tried a co-worker's machine running a newer version of OSX.
I've made absolutely sure that my page size it set correctly.
I'm using OSX 10.6.8 with Firefox v21.0.
The closest I can come to this is using Google Chrome, where there is a specific option for "none" in margins and the Chrome preview looks okay, but I'm not able to specify paper size unless I click "Print using system dialog" which gives me the same problems as above.
How do I remove the margins and just fit to the exact size of the page?

Welcome to Apple Support Communities. We're all users here.
Does your Print dialog offer photo 'borderless printing' settings for various paper sizes?
Every photo printer I've ever encountered leaves some unprintable margin, unless 'borderless' and/or 'photo' media are specifically selected.
On many of the Canon inkjet color printers I've used, borderless printing is only available when one of the photo papers is selected, even when a custom size specified that is smaller than the actual paper, trying to make it 'borderless'
I stitch together and print panoramas of theatre sets for my local community theater, so I end up with an image about 4.5 inches by 11.5 inches to be printed.
Selecting a photo and opening in Preview and selecting 'Fill Entire Paper' illustrates the standard unprintable borders for my specific printer.
When I open the panoramic image in Preview, I get this print preview. (The set image is of course rotated left)
By selecting Letter and Borderless in the Paper Size dialog for my Canon MG5320 printer, I get this result.
This particular Canon printer of course does NOT actually 'know' what paper is inserted, but the ink is applied assuming that a photo paper is being used, so it will saturate a standard paper.
Hope this helps!
Message was edited by: kostby

Similar Messages

How can I remove unread messages when I know I don't have any?

How can I remove "unread messages" when I know I do not have any?

Hit the num lock button again. Num lock forces only the numeric keypad underlying keys to work as a numeric keypad, and the rest of the keyboard won't work. Unfortunately Apple stopped including the numeric keypad hidden keyboard key labels on its keyboards. They used to include them. They are known as mouse keys: http://docs.info.apple.com/article.html?path=Mac/10.5/en/cdb_moskys.html

HT201371 How can I remove touch ID when the handset is turned off?

How can I remove touch ID when the handset is turned off?

Off it off. The only thing you can do when the phone is off is turn it on either by plugging it into power or by pressing the power button...
Please rephrase the question.

How can I fix my search engine? Google, Yahoo and Bing doesn't work.

How can I fix my search engine? Google, Yahoo and Bing doesn't work. I try to change them and they doesn't work. Its there a way to fix this problem?

Power off the router. Unplug it from the wall. Wait for few minutes.
Power off the router. Wait a while.
Connect the router back to to the wall.
Power the router back on. Wait until all lights are lit properly. It will take a while.
Restart the computer.
Start up in Safe Mode.
http://support.apple.com/kb/HT1455

HT4623 if the phone we are updating is locked how can we 6.1 to 5.0 and what if restoring doesn't work at all...

if the phone we are updating is locked how can we 6.1 to 5.0 and what if restoring doesn't work at all...

iTunes will only ever install the latest version of iOS for the device, in the case of the 3GS that is 6.1.

HT201263 how can i go to DFU mode if my sleep/wake button doesn't work? my phones been stuck on the logo for too long.

how can i go to DFU mode if my sleep/wake button doesn't work? my phones been stuck on the logo for too long.

You can't. Either get your phone fixed at a third-party repair shop, or go to an Apple store & they will replace your phone for US $199.

How can I remove "click" sounds when buttons are clicked?

I have created a Captivate project for an online tutorial.
There is no audio in the project but Captivate has embedded a
"click" audio which occurs when the user clicks on "Next", "Back"
and "Menu" buttons.
How can I remove these "click" sounds?

Hi dyageme and welcome to our community
Fellow Adobe Community Expert Paul Dewhurst offers up just
such a fix.
Click
here to visit Paul's site.
Cheers... Rick

How can I remove sites listed under "Most Visited?" Clearing history doesn't accomplish this.

The tool bar has a category "most Visited" sites and lists the top site. How can I remove this? Clearing the history has not accomplished this.

Hi,
Usually the category is emptied when the entire history range is erased. You can also permanently remove the '''Most Visited''' category by right-clicking on it and '''Delete'''.
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://addons.mozilla.org/en-US/firefox/addon/whats-that-preference/ What's That Preference? add-on] - Quickly decode about:config entries - After installation, go inside about:config, right-click any preference, enable (tick) MozillaZine Results to Panel and again right-click a pref and choose MozillaZine Reference to begin with.
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[https://support.mozilla.com/en-US/kb/Viewing%20video%20in%20Firefox%20without%20a%20plugin Viewing video in Firefox without a plugin]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[https://support.mozilla.com/en-US/kb/Basic%20Troubleshooting Basic Troubleshooting]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://kb.mozillazine.org/Testing_plugins Testing Plugins]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins Troubleshooting Plugins]

How can I generate printer spreads when using an Indesign Book?

Our design team utilizes the Indesign Book feature to tackle magazine design. This convenient feature has become part of our workflow for both print and dps versions of the content since we do not work in the same locations yet share design responsibility. We're able to see when someone else is working in a "chapter" and keep our overall content synced.
Is there a way from the Indesign Book palette to generate a pdf that is in printer's spreads? The export options included within the Book Palette appear geared to reader spreads only. It seems the only automated option is to work from 1 large Indesign file and use the File > Print Booklet option. Is there a better solution that is geared more toward the Indesign Book user that offers the same outcome without a lot of manual work?

I usually (when needed as sometimes is) export the entire book to a PDF using the pdf settings- bleeds etc. but I don't include inside bleeds.
I then create a new document the original size - and use the MultiPage importer script http://indesignsecrets.com/zanelli-releases-multipageimporter-for-importing-both-pdf-and-i ndd-files.php
You can then offset the PDF to the bleed using a negative value in the placement options (it's tricky to get the hang of this so try a few pages first)
Then I can use File>Print Booklet and Choose PDF.
It's a hack and a half but it can work - but I'd never send this particular file to a printers to be printed.
As always - be careful.

HT3771 How do I adjust print margins when printing from Safari?

When I try to print email from Safari, my messages go all the way to the edge of the paper and get cut off. I can't find any page set up adjustments for margins when in Safari, like I can in other software (Word, Excel, etc.). All I can find are page size, orientation, etc.

Welcome to Apple Support Communities. We're all users here.
Let me hazard a wild guess that you're using Outlook, formerly Hotmail, for email in your web browser.
When the forced 'downgrade' from Hotmail to Outlook occurred, they decided to hide some frequently used commands and made simple message printing from a browser print command nearly impossible, at least for Mac users.
The trick is to use the Print command now hidden within the Outlook menu bar.
It's in the "..." section of the Outlook top menu bar following Categories along with "Mark Read, Mark Unread, Flag, Unflag, and View Message Source".
Select Print from there, it will open a new Outlook Print Message window. You should once again be able to print emails in their entirety.

How can i remove MobileMe now when I am using iCloud

And why can't I synk Notes whitout a [email protected] account/adress ??
Followup question. How do I remove my old MobileMe account and the [email protected] adress??
/Jesper

If you bought the apps then that is one problem, but I am wondering if you bought the machine with all the apps installed already since you said the previous owner removed only his data? If so then that is not supported by Apple. The apps "belong" to the account that purchased them and that is the account that has to be logged in to get updates to them as well.
If that sounds like your situation then I am afraid you will have to delete any apps that you haven't purchased yourself. If you leave them on the machine then you won't be able to update them and they will eventually stop working. You should also make sure the computer is deauthorised in the App stiore and then re-authorised with your account and you ought to check if it is registered under "Find my Mac" to your iCloud ID or the previous owner's. This last one matters if the unit is stolen or if his account gets compromised someone could wipe the computer you have bought from him.

How do I remove automatic margins when using list tags?

Hi there,
i'm trying to create a list of links on my webpage using Dreamweaver CS4. I've created a .li tag using CSS so that no bullets/numbers show up and i've then created .ul a:link, ul a:hover etc compound tags to make all list items into rollovers.
However, the text in the lists indents automatically (as if I have set some sort of margin) and is thus, out of line with the text above it. No margin/padding is set in any of the CSS elements so I am confused.
Any help would be appreciated.

yeah sure...
code:
</head>
<body class="twoColFixLtHdr">
<div id="container">
<div id="header"><img src="../images/navbar_footer/navbar_ips.gif" alt="International Project Space" width="334" height="90" border="0" /><img src="../images/navbar_footer/navbar_ex.gif" width="128" height="90" alt="IPS- Exhibitions" /><img src="../images/navbar_footer/navbar_pro.gif" width="148" height="90" alt="IPS- projects" /><img src="../images/navbar_footer/navbar_info.gif" width="142" height="90" alt="IPS- Info" /></div>

<div id="sidebar1">
</div>
<div id="mainContent">
<ul>
    <li><a href="../index.html">Current</a></li>
    <li><a href="../index.html">Forthcoming</a></li>
    <li><a href="../index.html">Archive</a></li>
    <li><a href="../index.html">NOICES</a></li>
</ul>
</div>

<br class="clearfloat" />
<div id="footer"><img src="../images/navbar_footer/footer.gif" width="193" height="80" alt="IPS- Contact Us" />
</div>
</div>
</body>
</html>
CSS:
@charset "UTF-8";
body {
font: 100% Verdana, Arial, Helvetica, sans-serif;
background: #666666;
margin: 0;
padding: 0;
text-align: center;
color: #000000;
.twoColFixLtHdr #container {
width: 780px;
background: #FFFFFF;
margin:0 auto;
text-align: left;
.twoColFixLtHdr #header {
margin: 0;
background: #FFFFFF;
padding: 0 0px 0 0px;
.twoColFixLtHdr #header h1 {
margin: 0;
padding: 0px 0;
.twoColFixLtHdr #sidebar1 {
float: left;
width: 334px;
background: #FFFFFF;
padding: 0px;
height: 529px;
.twoColFixLtHdr #mainContent {
margin: 0 0 0 334px;
padding: 0 7px;
.twoColFixLtHdr #footer {
background:#FFFFFF;
width: 334px;
padding-top: 0;
padding-right: 10px;
padding-bottom: 0;
padding-left: 0px;
.twoColFixLtHdr #footer p {
margin: 0;
padding: 10px 0;
.fltrt {
float: right;
margin-left: 8px;
.fltlft {
float: left;
margin-right: 8px;
.clearfloat {
clear:both;
    height:0;
    font-size: 1px;
    line-height: 0px;
ul a:link {
font-family: "Courier New", Courier, monospace;
font-size: 12px;
color: #000;
text-decoration: none;
ul a:visited {
font-family: "Courier New", Courier, monospace;
font-size: 12px;
color: #000;
text-decoration: none;
ul a:hover {
font-family: "Courier New", Courier, monospace;
font-size: 12px;
color: #F00;
li {
list-style-type: none;

HT5661 how can I recver origonal password when I set up my ipad 3

How can I recover my origonal password used to set up my ipad 3 I forgot it

https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

How to reboot a guest domain when hung and ldm stop-domain doesn't work

Hi, the configuration is as follows.
SF T1000 (32 threads/16gb) memory
Latest Firmware and the LDOM patch (-02) applied.
This is how the LDOMs are setup.
Instance CPUs Memory
Service domain 4 2g
ldom1 4 2g
ldom2 4 2g
ldom3 4 2g
ldom4 4 2g
ldom5 4 2g
ldom6 4 2g
ldom7 4 1.9g
All guest domains are running on disk-images on mirrored BE on service domain. Size around 7 gb and SUNWCXall installed.
However, I have had a few hangs, especially when working over the virtual switch on the domains.
At the moment ldom1 is totally hung. See below for info:
bash-3.00# ldm list-domain
Name State Flags Cons VCPU Memory Util Uptime
primary active -t-cv SP 4 2G 0.5% 1d 1h 17m
ldom1 active -t--- 5000 4 2G 25% 2h 14m
ldom2 active -t--- 5001 4 2G 0.2% 2h 35m
ldom3 active ----- 5002 4 2G 0.2% 47m
ldom4 active ----- 5003 4 2G 0.2% 1d 1h 10m
ldom5 active -t--- 5004 4 2G 0.3% 1d 1h 10m
ldom6 active -t--- 5005 4 2G 0.2% 1d 1h 10m
ldom7 active -t--- 5006 4 1900M 0.2% 7h 29m
bash-3.00#
bash-3.00# ldm stop-domain ldom1
LDom ldom1 stop notification failed
bash-3.00#
bash-3.00# telnet localhost 5000
Trying 127.0.0.1...
Connected to localhost.
Escape character is '^]'.
Connecting to console "ldom1" in group "ldom1" ....
Press ~? for control options ..
<COMMENT: ~w sent!>
Warning: another user currently has write permission
to this console and forcibly removing him/her will terminate
any current write action and all work will be lost.
Would you like to continue?[y/n] y
< COMMENT: I don't get any response when hitting enter and ~# (break) doesn't seem to work....>
I cannot ssh to ldom1 since it appears to be dead!
Anyone know if I can send some sort of reset to this hung domain? How can I troubleshoot it?
Regards,
Daniel

UPDATE 2
=========
When I attached to ldom3 through the console services, this domain also had
hung.
Below is some LDOM information.
bash-3.00# ldm list-services
Vldc: primary-vldc0
Vldc: primary-vldc3
Vds: primary-vds0
vdsdev: vol1 device=/ldoms/be/ldom_1.img
vdsdev: vol5 device=/ldoms/be/ldom_5.img
vdsdev: vol6 device=/ldoms/be/ldom_6.img
vdsdev: vol7 device=/ldoms/be/ldom_7.img
vdsdev: vol2 device=/ldoms/be/ldom_2.img
vdsdev: vol3 device=/ldoms/be/ldom_3.img
vdsdev: vol4 device=/ldoms/be/ldom_4.img
Vcc: primary-vcc0
port-range=5000-5100
Vsw: primary-vsw0
mac-addr=0:14:4f:f8:66:9f
net-dev=bge0
mode=prog,promisc
Vsw: primary-vsw1
mac-addr=0:14:4f:f9:dd:53
net-dev=bge1
mode=prog,promisc
bash-3.00# ldm list-devices
vCPU:
vCPUID %FREE
MAU:
Free MA-Units:
cpuset (0, 1, 2, 3)
cpuset (4, 5, 6, 7)
cpuset (8, 9, 10, 11)
cpuset (12, 13, 14, 15)
cpuset (16, 17, 18, 19)
cpuset (20, 21, 22, 23)
cpuset (24, 25, 26, 27)
cpuset (28, 29, 30, 31)
Memory:
Available mblocks:
PADDR SIZE
0x3fec00000 20M (0x1400000)
I/O Devices:
Free Devices:
bash-3.00# ldm list-domains
Unknown command list-domains; use --help option for list of available commands
bash-3.00# ldm list-domain
Name State Flags Cons VCPU Memory Util Uptime
primary active -t-cv SP 4 2G 0.7% 1d 4h 8m
ldom1 active -t--- 5000 4 2G 0.3% 1h 24m
ldom2 active -t--- 5001 4 2G 0.6% 5h 26m
ldom3 active ----- 5002 4 2G 25% 3h 38m
ldom4 active ----- 5003 4 2G 0.1% 1d 4h 1m
ldom5 active -t--- 5004 4 2G 0.1% 1d 4h 1m
ldom6 active -t--- 5005 4 2G 0.7% 1d 4h 1m
ldom7 active -t--- 5006 4 1900M 0.1% 10h 20m
bash-3.00#
bash-3.00# ldm list-bindings
Name: primary
State: active
Flags: transition,control,vio service
OS:
Util: 0.5%
Uptime: 1d 4h 11m
Vcpu: 4
vid pid util strand
0 0 0.9% 100%
1 1 0.8% 100%
2 2 0.2% 100%
3 3 0.3% 100%
Memory: 2G
real-addr phys-addr size
0x8000000 0x8000000 2G
Vars: reboot-command=boot
IO: pci@780 (bus_a)
pci@7c0 (bus_b)
Vldc: primary-vldc0
[LDC: 0x0]
[(HV Control channel)]
[LDC: 0x1]
[LDom primary   (Domain Services channel)]
[LDC: 0x3]
[LDom primary   (FMA Services channel)]
[LDC: 0xb]
[LDom ldom1     (Domain Services channel)]
[LDC: 0x22]
[LDom ldom5     (Domain Services channel)]
[LDC: 0x27]
[LDom ldom6     (Domain Services channel)]
[LDC: 0x2d]
[LDom ldom7     (Domain Services channel)]
[LDC: 0x10]
[LDom ldom2     (Domain Services channel)]
[LDC: 0x18]
[LDom ldom3     (Domain Services channel)]
[LDC: 0x1d]
[LDom ldom4     (Domain Services channel)]
Vldc: primary-vldc3
[LDC: 0x14]
[spds (SP channel)]
[LDC: 0xd]
[system-management (SP channel)]
[LDC: 0x6]
[sunvts (SP channel)]
[LDC: 0x7]
[sunmc (SP channel)]
[LDC: 0x8]
[explorer (SP channel)]
[LDC: 0x9]
[led (SP channel)]
[LDC: 0xa]
[flashupdate (SP channel)]
Vds: primary-vds0
vdsdev: vol1 device=/ldoms/be/ldom_1.img
vdsdev: vol5 device=/ldoms/be/ldom_5.img
vdsdev: vol6 device=/ldoms/be/ldom_6.img
vdsdev: vol7 device=/ldoms/be/ldom_7.img
vdsdev: vol2 device=/ldoms/be/ldom_2.img
vdsdev: vol3 device=/ldoms/be/ldom_3.img
vdsdev: vol4 device=/ldoms/be/ldom_4.img
[LDom ldom1, dev-name: vol1]
[LDC: 0xe]
[LDom ldom5, dev-name: vol5]
[LDC: 0x25]
[LDom ldom6, dev-name: vol6]
[LDC: 0x2a]
[LDom ldom7, dev-name: vol7]
[LDC: 0x30]
[LDom ldom2, dev-name: vol2]
[LDC: 0x13]
[LDom ldom3, dev-name: vol3]
[LDC: 0x1b]
[LDom ldom4, dev-name: vol4]
[LDC: 0x20]
Vcc: primary-vcc0
[LDC: 0xf]
[LDom ldom1, group: ldom1, port: 5000]
[LDC: 0x26]
[LDom ldom5, group: ldom5, port: 5004]
[LDC: 0x2c]
[LDom ldom6, group: ldom6, port: 5005]
[LDC: 0x31]
[LDom ldom7, group: ldom7, port: 5006]
[LDC: 0x15]
[LDom ldom2, group: ldom2, port: 5001]
[LDC: 0x1c]
[LDom ldom3, group: ldom3, port: 5002]
[LDC: 0x21]
[LDom ldom4, group: ldom4, port: 5003]
port-range=5000-5100
Vsw: primary-vsw0
mac-addr=0:14:4f:f8:66:9f
net-dev=bge0
[LDC: 0xc]
[LDom ldom1, name: vnet1, mac-addr: 0:14:4f:fa:1e:4d]
[LDC: 0x23]
[LDom ldom5, name: vnet0, mac-addr: 0:14:4f:f9:ae:a1]
[LDC: 0x28]
[LDom ldom6, name: vnet0, mac-addr: 0:14:4f:f8:27:b8]
[LDC: 0x2e]
[LDom ldom7, name: vnet0, mac-addr: 0:14:4f:f9:1f:5d]
[LDC: 0x11]
[LDom ldom2, name: vnet0, mac-addr: 0:14:4f:f8:c9:7c]
[LDC: 0x19]
[LDom ldom3, name: vnet0, mac-addr: 0:14:4f:fb:d9:6d]
[LDC: 0x1e]
[LDom ldom4, name: vnet0, mac-addr: 0:14:4f:fb:df:2c]
mode=prog,promisc
Vsw: primary-vsw1
mac-addr=0:14:4f:f9:dd:53
net-dev=bge1
[LDC: 0x2b]
[LDom ldom1, name: vnet2, mac-addr: 0:14:4f:fa:b1:f0]
[LDC: 0x24]
[LDom ldom5, name: vnet1, mac-addr: 0:14:4f:f9:b2:b0]
[LDC: 0x29]
[LDom ldom6, name: vnet1, mac-addr: 0:14:4f:fb:f5:c3]
[LDC: 0x2f]
[LDom ldom7, name: vnet1, mac-addr: 0:14:4f:f8:3a:3e]
[LDC: 0x12]
[LDom ldom2, name: vnet1, mac-addr: 0:14:4f:f9:88:a0]
[LDC: 0x1a]
[LDom ldom3, name: vnet1, mac-addr: 0:14:4f:fa:aa:57]
[LDC: 0x1f]
[LDom ldom4, name: vnet1, mac-addr: 0:14:4f:f9:33:59]
mode=prog,promisc
Vldcc: vldcc1 [FMA Services]
service: ldmfma
service: primary-vldc0 @ primary
[LDC: 0x4]
Vldcc: vldcc2 [SP channel]
service: spfma
[LDC: 0x5]
Vldcc: vldcc0 [Domain Services]
service: primary-vldc0 @ primary
[LDC: 0x2]
Vldcc: hvctl [Hypervisor Control]
service: primary-vldc0 @ primary
[LDC: 0x0]
Vcons: SP
Name: ldom1
State: active
Flags: transition
OS:
Util: 0.3%
Uptime: 1h 27m
Vcpu: 4
vid pid util strand
0 4 0.5% 100%
1 5 0.6% 100%
2 6 0.1% 100%
3 7 0.0% 100%
Memory: 2G
real-addr phys-addr size
0x8000000 0x88000000 2G
Vars: auto-boot?=false
boot-device=/virtual-devices@100/channel-devices@200/disk@0:a vdisk
nvramrc=devalias vnet /virtual-devices@100/channel-devices@200/network@0
use-nvramrc?=true
Vnet: vnet1 [LDC: 0xb]
[Peer LDom: ldom5, mac-addr: 0:14:4f:f9:ae:a1] [LDC: 0xd]
[Peer LDom: ldom6, mac-addr: 0:14:4f:f8:27:b8] [LDC: 0xf]
[Peer LDom: ldom7, mac-addr: 0:14:4f:f9:1f:5d] [LDC: 0x4]
[Peer LDom: ldom2, mac-addr: 0:14:4f:f8:c9:7c] [LDC: 0x6]
[Peer LDom: ldom3, mac-addr: 0:14:4f:fb:d9:6d] [LDC: 0x8]
[Peer LDom: ldom4, mac-addr: 0:14:4f:fb:df:2c]
mac-addr=0:14:4f:fa:1e:4d
service: primary-vsw0 @ primary
[LDC: 0x1]
Vnet: vnet2 [LDC: 0xc]
[Peer LDom: ldom5, mac-addr: 0:14:4f:f9:b2:b0] [LDC: 0xe]
[Peer LDom: ldom6, mac-addr: 0:14:4f:fb:f5:c3] [LDC: 0x10]
[Peer LDom: ldom7, mac-addr: 0:14:4f:f8:3a:3e] [LDC: 0x5]
[Peer LDom: ldom2, mac-addr: 0:14:4f:f9:88:a0] [LDC: 0x7]
[Peer LDom: ldom3, mac-addr: 0:14:4f:fa:aa:57] [LDC: 0x9]
[Peer LDom: ldom4, mac-addr: 0:14:4f:f9:33:59]
mac-addr=0:14:4f:fa:b1:f0
service: primary-vsw1 @ primary
[LDC: 0xa]
Vdisk: vdisk1 vol1@primary-vds0
service: primary-vds0 @ primary
[LDC: 0x2]
Vcons: [via LDC:3]
ldom1@primary-vcc0 [port:5000]
Vldcc: vldcc0 [Domain Services]
service: primary-vldc0 @ primary
[LDC: 0x0]
Name: ldom2
State: active
Flags: transition
OS:
Util: 0.1%
Uptime: 5h 29m
Vcpu: 4
vid pid util strand
0 8 0.6% 100%
1 9 0.1% 100%
2 10 0.0% 100%
3 11 0.2% 100%
Memory: 2G
real-addr phys-addr size
0x8000000 0x108000000 2G
Vars: boot-device=vdisk
Vnet: vnet0 [LDC: 0x2]
[Peer LDom: ldom1, mac-addr: 0:14:4f:fa:1e:4d] [LDC: 0x3]
[Peer LDom: ldom5, mac-addr: 0:14:4f:f9:ae:a1] [LDC: 0x4]
[Peer LDom: ldom6, mac-addr: 0:14:4f:f8:27:b8] [LDC: 0x5]
[Peer LDom: ldom7, mac-addr: 0:14:4f:f9:1f:5d] [LDC: 0xd]
[Peer LDom: ldom3, mac-addr: 0:14:4f:fb:d9:6d] [LDC: 0xf]
[Peer LDom: ldom4, mac-addr: 0:14:4f:fb:df:2c]
mac-addr=0:14:4f:f8:c9:7c
service: primary-vsw0 @ primary
[LDC: 0x1]
Vnet: vnet1 [LDC: 0x7]
[Peer LDom: ldom1, mac-addr: 0:14:4f:fa:b1:f0] [LDC: 0x8]
[Peer LDom: ldom5, mac-addr: 0:14:4f:f9:b2:b0] [LDC: 0x9]
[Peer LDom: ldom6, mac-addr: 0:14:4f:fb:f5:c3] [LDC: 0xa]
[Peer LDom: ldom7, mac-addr: 0:14:4f:f8:3a:3e] [LDC: 0xe]
[Peer LDom: ldom3, mac-addr: 0:14:4f:fa:aa:57] [LDC: 0x10]
[Peer LDom: ldom4, mac-addr: 0:14:4f:f9:33:59]
mac-addr=0:14:4f:f9:88:a0
service: primary-vsw1 @ primary
[LDC: 0x6]
Vdisk: vdisk2 vol2@primary-vds0
service: primary-vds0 @ primary
[LDC: 0xb]
Vcons: [via LDC:12]
ldom2@primary-vcc0 [port:5001]
Vldcc: vldcc0 [Domain Services]
service: primary-vldc0 @ primary
[LDC: 0x0]
Name: ldom3
State: active
Flags:
OS:
Util: 24%
Uptime: 3h 42m
Vcpu: 4
vid pid util strand
0 12 100% 100%
1 13 1.4% 100%
2 14 1.4% 100%
3 15 1.4% 100%
Memory: 2G
real-addr phys-addr size
0x8000000 0x188000000 2G
Vars: boot-device=vdisk
Vnet: vnet0 [LDC: 0x2]
[Peer LDom: ldom1, mac-addr: 0:14:4f:fa:1e:4d] [LDC: 0x3]
[Peer LDom: ldom5, mac-addr: 0:14:4f:f9:ae:a1] [LDC: 0x4]
[Peer LDom: ldom6, mac-addr: 0:14:4f:f8:27:b8] [LDC: 0x5]
[Peer LDom: ldom7, mac-addr: 0:14:4f:f9:1f:5d] [LDC: 0x6]
[Peer LDom: ldom2, mac-addr: 0:14:4f:f8:c9:7c] [LDC: 0xf]
[Peer LDom: ldom4, mac-addr: 0:14:4f:fb:df:2c]
mac-addr=0:14:4f:fb:d9:6d
service: primary-vsw0 @ primary
[LDC: 0x1]
Vnet: vnet1 [LDC: 0x8]
[Peer LDom: ldom1, mac-addr: 0:14:4f:fa:b1:f0] [LDC: 0x9]
[Peer LDom: ldom5, mac-addr: 0:14:4f:f9:b2:b0] [LDC: 0xa]
[Peer LDom: ldom6, mac-addr: 0:14:4f:fb:f5:c3] [LDC: 0xb]
[Peer LDom: ldom7, mac-addr: 0:14:4f:f8:3a:3e] [LDC: 0xc]
[Peer LDom: ldom2, mac-addr: 0:14:4f:f9:88:a0] [LDC: 0x10]
[Peer LDom: ldom4, mac-addr: 0:14:4f:f9:33:59]
mac-addr=0:14:4f:fa:aa:57
service: primary-vsw1 @ primary
[LDC: 0x7]
Vdisk: vdisk3 vol3@primary-vds0
service: primary-vds0 @ primary
[LDC: 0xd]
Vcons: [via LDC:14]
ldom3@primary-vcc0 [port:5002]
Vldcc: vldcc0 [Domain Services]
service: primary-vldc0 @ primary
[LDC: 0x0]
Name: ldom4
State: active
Flags:
OS:
Util: 0.2%
Uptime: 1d 4h 4m
Vcpu: 4
vid pid util strand
0 16 0.4% 100%
1 17 0.3% 100%
2 18 0.1% 100%
3 19 0.0% 100%
Memory: 2G
real-addr phys-addr size
0x8000000 0x208000000 2G
Vars: boot-device=vdisk
Vnet: vnet0 [LDC: 0x2]
[Peer LDom: ldom1, mac-addr: 0:14:4f:fa:1e:4d] [LDC: 0x3]
[Peer LDom: ldom5, mac-addr: 0:14:4f:f9:ae:a1] [LDC: 0x4]
[Peer LDom: ldom6, mac-addr: 0:14:4f:f8:27:b8] [LDC: 0x5]
[Peer LDom: ldom7, mac-addr: 0:14:4f:f9:1f:5d] [LDC: 0x6]
[Peer LDom: ldom2, mac-addr: 0:14:4f:f8:c9:7c] [LDC: 0x7]
[Peer LDom: ldom3, mac-addr: 0:14:4f:fb:d9:6d]
mac-addr=0:14:4f:fb:df:2c
service: primary-vsw0 @ primary
[LDC: 0x1]
Vnet: vnet1 [LDC: 0x9]
[Peer LDom: ldom1, mac-addr: 0:14:4f:fa:b1:f0] [LDC: 0xa]
[Peer LDom: ldom5, mac-addr: 0:14:4f:f9:b2:b0] [LDC: 0xb]
[Peer LDom: ldom6, mac-addr: 0:14:4f:fb:f5:c3] [LDC: 0xc]
[Peer LDom: ldom7, mac-addr: 0:14:4f:f8:3a:3e] [LDC: 0xd]
[Peer LDom: ldom2, mac-addr: 0:14:4f:f9:88:a0] [LDC: 0xe]
[Peer LDom: ldom3, mac-addr: 0:14:4f:fa:aa:57]
mac-addr=0:14:4f:f9:33:59
service: primary-vsw1 @ primary
[LDC: 0x8]
Vdisk: vdisk4 vol4@primary-vds0
service: primary-vds0 @ primary
[LDC: 0xf]
Vcons: [via LDC:16]
ldom4@primary-vcc0 [port:5003]
Vldcc: vldcc0 [Domain Services]
service: primary-vldc0 @ primary
[LDC: 0x0]
Name: ldom5
State: active
Flags: transition
OS:
Util: 0.2%
Uptime: 1d 4h 4m
Vcpu: 4
vid pid util strand
0 20 0.6% 100%
1 21 0.0% 100%
2 22 0.3% 100%
3 23 0.0% 100%
Memory: 2G
real-addr phys-addr size
0x8000000 0x288000000 2G
Vars: boot-device=vdisk
Vnet: vnet0 [LDC: 0x2]
[Peer LDom: ldom1, mac-addr: 0:14:4f:fa:1e:4d] [LDC: 0xd]
[Peer LDom: ldom6, mac-addr: 0:14:4f:f8:27:b8] [LDC: 0xf]
[Peer LDom: ldom7, mac-addr: 0:14:4f:f9:1f:5d] [LDC: 0x3]
[Peer LDom: ldom2, mac-addr: 0:14:4f:f8:c9:7c] [LDC: 0x5]
[Peer LDom: ldom3, mac-addr: 0:14:4f:fb:d9:6d] [LDC: 0x9]
[Peer LDom: ldom4, mac-addr: 0:14:4f:fb:df:2c]
mac-addr=0:14:4f:f9:ae:a1
service: primary-vsw0 @ primary
[LDC: 0x1]
Vnet: vnet1 [LDC: 0x7]
[Peer LDom: ldom1, mac-addr: 0:14:4f:fa:b1:f0] [LDC: 0xe]
[Peer LDom: ldom6, mac-addr: 0:14:4f:fb:f5:c3] [LDC: 0x10]
[Peer LDom: ldom7, mac-addr: 0:14:4f:f8:3a:3e] [LDC: 0x4]
[Peer LDom: ldom2, mac-addr: 0:14:4f:f9:88:a0] [LDC: 0x8]
[Peer LDom: ldom3, mac-addr: 0:14:4f:fa:aa:57] [LDC: 0xa]
[Peer LDom: ldom4, mac-addr: 0:14:4f:f9:33:59]
mac-addr=0:14:4f:f9:b2:b0
service: primary-vsw1 @ primary
[LDC: 0x6]
Vdisk: vdisk5 vol5@primary-vds0
service: primary-vds0 @ primary
[LDC: 0xb]
Vcons: [via LDC:12]
ldom5@primary-vcc0 [port:5004]
Vldcc: vldcc0 [Domain Services]
service: primary-vldc0 @ primary
[LDC: 0x0]
Name: ldom6
State: active
Flags: transition
OS:
Util: 0.3%
Uptime: 1d 4h 4m
Vcpu: 4
vid pid util strand
0 24 0.5% 100%
1 25 0.3% 100%
2 26 0.5% 100%
3 27 0.0% 100%
Memory: 2G
real-addr phys-addr size
0x8000000 0x308000000 2G
Vars: boot-device=vdisk
Vnet: vnet0 [LDC: 0x2]
[Peer LDom: ldom1, mac-addr: 0:14:4f:fa:1e:4d] [LDC: 0x6]
[Peer LDom: ldom5, mac-addr: 0:14:4f:f9:ae:a1] [LDC: 0xf]
[Peer LDom: ldom7, mac-addr: 0:14:4f:f9:1f:5d] [LDC: 0x3]
[Peer LDom: ldom2, mac-addr: 0:14:4f:f8:c9:7c] [LDC: 0x5]
[Peer LDom: ldom3, mac-addr: 0:14:4f:fb:d9:6d] [LDC: 0xa]
[Peer LDom: ldom4, mac-addr: 0:14:4f:fb:df:2c]
mac-addr=0:14:4f:f8:27:b8
service: primary-vsw0 @ primary
[LDC: 0x1]
Vnet: vnet1 [LDC: 0x8]
[Peer LDom: ldom1, mac-addr: 0:14:4f:fa:b1:f0] [LDC: 0xc]
[Peer LDom: ldom5, mac-addr: 0:14:4f:f9:b2:b0] [LDC: 0x10]
[Peer LDom: ldom7, mac-addr: 0:14:4f:f8:3a:3e] [LDC: 0x4]
[Peer LDom: ldom2, mac-addr: 0:14:4f:f9:88:a0] [LDC: 0x9]
[Peer LDom: ldom3, mac-addr: 0:14:4f:fa:aa:57] [LDC: 0xb]
[Peer LDom: ldom4, mac-addr: 0:14:4f:f9:33:59]
mac-addr=0:14:4f:fb:f5:c3
service: primary-vsw1 @ primary
[LDC: 0x7]
Vdisk: vdisk6 vol6@primary-vds0
service: primary-vds0 @ primary
[LDC: 0xd]
Vcons: [via LDC:14]
ldom6@primary-vcc0 [port:5005]
Vldcc: vldcc0 [Domain Services]
service: primary-vldc0 @ primary
[LDC: 0x0]
Name: ldom7
State: active
Flags: transition
OS:
Util: 0.4%
Uptime: 10h 23m
Vcpu: 4
vid pid util strand
0 28 0.6% 100%
1 29 0.1% 100%
2 30 0.3% 100%
3 31 0.2% 100%
Memory: 1900M
real-addr phys-addr size
0x8000000 0x388000000 1900M
Vars: boot-device=vdisk
Vnet: vnet0 [LDC: 0x2]
[Peer LDom: ldom1, mac-addr: 0:14:4f:fa:1e:4d] [LDC: 0x6]
[Peer LDom: ldom5, mac-addr: 0:14:4f:f9:ae:a1] [LDC: 0x7]
[Peer LDom: ldom6, mac-addr: 0:14:4f:f8:27:b8] [LDC: 0x3]
[Peer LDom: ldom2, mac-addr: 0:14:4f:f8:c9:7c] [LDC: 0x5]
[Peer LDom: ldom3, mac-addr: 0:14:4f:fb:d9:6d] [LDC: 0xb]
[Peer LDom: ldom4, mac-addr: 0:14:4f:fb:df:2c]
mac-addr=0:14:4f:f9:1f:5d
service: primary-vsw0 @ primary
[LDC: 0x1]
Vnet: vnet1 [LDC: 0x9]
[Peer LDom: ldom1, mac-addr: 0:14:4f:fa:b1:f0] [LDC: 0xd]
[Peer LDom: ldom5, mac-addr: 0:14:4f:f9:b2:b0] [LDC: 0xe]
[Peer LDom: ldom6, mac-addr: 0:14:4f:fb:f5:c3] [LDC: 0x4]
[Peer LDom: ldom2, mac-addr: 0:14:4f:f9:88:a0] [LDC: 0xa]
[Peer LDom: ldom3, mac-addr: 0:14:4f:fa:aa:57] [LDC: 0xc]
[Peer LDom: ldom4, mac-addr: 0:14:4f:f9:33:59]
mac-addr=0:14:4f:f8:3a:3e
service: primary-vsw1 @ primary
[LDC: 0x8]
Vdisk: vdisk7 vol7@primary-vds0
service: primary-vds0 @ primary
[LDC: 0xf]
Vcons: [via LDC:16]
ldom7@primary-vcc0 [port:5006]
Vldcc: vldcc0 [Domain Services]
service: primary-vldc0 @ primary
[LDC: 0x0]
bash-3.00#

Acrobat Pro for Mac bought on Amazon;how can I register it?. registration code they give me, it doesn't work. (It has letters and the registration boxes won't accept letters.) How do I get this to work?

I purchased Acrobat Pro for Mac on Amazon. When I try to register with the registration code they give me, it doesn't work. (It has letters and the registration boxes won't accept letters.) How do I get this to work?

If you don't have original install disks for your Mac, you can order replacements disks directly from Apple at a nominal cost. The original install DVDs are required to reset the password.
If you have no data on your drive that you want to keep, you can boot up from the OSX Snow Leopard disk and install OSX SL.
Insert the Snow Leopard DVD and hold the C key during startup. The Mac should boot from the CD/DVD drive into the installer.
Follow the prompts, erase the disk and install OSX Snow Leopard.

How can I remove print margins when manually setting them to zero doesn't work?

Similar Messages

Maybe you are looking for