How can i restore all my emails from time machine after mavericks installation?

ALL of my emails disappeared from all my mailboxes after Mavericks was installed. When I try to restore from external Time Machine from earlier yesterday, for example, nothing happens. Can anyone help me with this huge problem?

Another one that Apple doesn't make obvious. 
See #E3 in Time Machine - Troubleshooting. 

Similar Messages

  • How can I restore Parental Control Settings from Time Machine Backup?

    I was trying to adjust one of the parental controlled accounts for my child.  I disabled parental controls, rebooted, and re-enabled it.  Now all the settings that I had setup before are gone.  How can I restore Parental Control Settings from Time Machine Backup?

    Hi ...
    I've found a solution to my problem.
    Time Machine locates extenal HDD backups differently depending if they were done via a network or via a USB/FireWire/Thunderbolt connection.
    My initial backup was done via a direct Thunderbolt connection. I ran into the above issue b/c the second time when I tried looking for the backup file the HDD was conencted to my iMac and I was accessing it via a network conenction.
    I simply connected the drive directly to my MacBook pro and ... voila. I was able to see the backup, select the iPhoto library and begin the restore.
    Hope this helps.
    BTW - I found this out by reading the 'blue box' selection on this page: http://pondini.org/TM/E2.html
    (Thanks goes to Pondini!)

  • How can you restore your backup files from time machine?

    Hi how can you restore your backup files on your mac book pro from time machine? i lost all my pic and files on my phone and then restored it from the last back up which was when i lost all my files i dont know what i did? someone please help!
    Thank You
    Jon

    YOu might get more info if you post in the MAC forum.

  • How can I restore just one application from Time Machine?

    Hello, I have just one application that is really acting quirky and won't load correctly anymore and I would like to restore that application from Time Machine but am just not sure how to do that. Can someone please walk me through step by step on how to restore just one application. Thank you. Jean
    Message was edited by: anokienurse

    Before you restore an application from a Time Machine backup it would be wiser to remove the current installed copy then reinstall from the application's original distribution medium - download, CD/DVD, etc. The reason for this is that Time Machine backs up every hour. By now the bad version of this application is now backed up to your Time Machine backup drive. Restoring from the backup won't resolve your problem.
    First, uninstall the old program. If the program came with an uninstaller then use it. If not then start by deleting the application from the Applications folder. Then locate all the support files associated with the application and remove them, too. Look for these in:
    /Users/yourusername/Library/Preferences
    /Users/yourusername/Library/Applications Support
    Applications may come with a separate uninstaller program that could also be in your Applications folder. Some applications may install other files in other locations on your computer. If you tell us what the application is we may be able to provide additional help.
    You may find more information here: The XLab FAQs. Read the FAQ on uninstalling software.

  • How can I restore a deleted calendar from time machine

    I accidentally deleted one of my calendars.  How can I restore it from time machine?

    I'm not sure why it didn't work.  I deleted the old Calendar folder and then replaced it with a Time Machine version of the same folder from the previous day.  Then I opened iCal and there was still nothing there.
    The reason I just deleted Calendar folder and it's sub-folders and tried to start from scratch is because I could tell which sub-folder was for any one specific calendar since the sub-folder names were in some sort of code.

  • How can I restore saved e-mail from time machine in 10.7.2?

    My saved e-mails just vanished. I have dire need to restore them. They contain vital information. Where are they in Time Machine and exactly how can I restore them? Thanks in advance for any help.
    Jim

    Hi James,
    sorry for my delay.
    You mean that you found the folders in your Library/Mail/etc...  ??
    Strange that you have the messages there and not in your Mail program. It is clear a matter of a database corrupted.  Inside Mail there is a command Rebuild. this should do the job but there is a risk of a demage to the present Mail.  Of course you can explore each single file in the librari folder but you see they are down in a comples structure and you may not find everithing.
    I am not so expert to give you a safe suggetion.
    Before tryoing a rebuilt I would do as follows to be more safe about the possible result.
    Create a new user Account in your Mac and copy your complete Mail folder into the Library of the new account.
    Then try the rebuild option in the new user account and see what happens. You today mail system will not be affected and you can decide what to do.
    To postpone a rebuilt can be an option but if you have a demaged database and you se you can live with the result of a rebuild in the "test" account I would rebuild also your.
    For some reason before doing any action I wouyld repair the permission and also check the HD to be sure you do not have any write-read problem.
    Let me know if it works.

  • External hd that I used for data died... it is backed up on time machine... how do I restore all my data from time machine to a new external hd?

    I installed the Lion OS this weekend. After Spotlight tried to index my external hard drive (that I use to store all my data), the external hard drive died. I expected that to happen at some point. The hard drive was an old FireWire 400 LaCie that I had working with my 2009 iMac (FireWire 800) by using an adaptor cable.
    My Time Machine backs up both my Macintosh (internal) HD and my external data HD. I know I need to buy a new external drive to use to store my data.
    But, then what? How do I get all the content from the backups of the old external (data) HD to the new one?

    Another one that Apple doesn't make obvious. 
    See #E3 in Time Machine - Troubleshooting. 

  • How can I restore an old backup from Time Machine to my iPhone 5?

    I have the iPhone 5 that I had previously transferred my apps and other data to from my iPhone 4. Due to poor battery life, I had to restore the iPhone 5 as a new phone. This helped battery life but now I habve lost my text messages, App data and photos. I use Time Machine on my Mac so whayt do I need to do to get the data back on my phone. I'd like to do this without restoring the phone but rather syncing it with data recovered from Time Machine. I don't want to screw up the battery life again.

    Hi ...
    I've found a solution to my problem.
    Time Machine locates extenal HDD backups differently depending if they were done via a network or via a USB/FireWire/Thunderbolt connection.
    My initial backup was done via a direct Thunderbolt connection. I ran into the above issue b/c the second time when I tried looking for the backup file the HDD was conencted to my iMac and I was accessing it via a network conenction.
    I simply connected the drive directly to my MacBook pro and ... voila. I was able to see the backup, select the iPhoto library and begin the restore.
    Hope this helps.
    BTW - I found this out by reading the 'blue box' selection on this page: http://pondini.org/TM/E2.html
    (Thanks goes to Pondini!)

  • Can I restore Yosemite Public beta from Time Machine with Mavericks bootable recovery drive

    I had Yosemite beta running on an SSD in my Mac Book Pro. This drive has failed and is no longer recognized. I do have a Time Machine backup of this drive. When I restored it to a new SSD it would not boot.(formatted to MAC OS Extended (Journaled) with a single GUID partition)  I do not have a Yosemite recovery drive. My question is, can I boot to the SSD using the Mavericks recovery USB drive and do a full restore of my Yosemite drive from Time Machine? I am unable to re-download the Yosemite beta as my code has already been redeemed.

    Yes, this did work. I booted to the Mavericks recovery drive and pulled the backup off of Time Capsule and resolved the issue.

  • How can I restore my Address Book from Time Machine, iCloud keeps overwriting

    This was all done on my MacBook Pro, using Mavericks updated.  With the Address Book, and iCloud.
    Ok, this is really a mess.  I have close to a 1,000 contacts in my address book.  I'm not going to manually sort them.  I have a bunch of groups in my address book.  These groups are very important, and not something simple to sort out.  I have already read this thread:  https://discussions.apple.com/message/18790074?searchText=How%20can%20I%20restor e%20my%20Address%20Book%20from%20Time%20Machine,%20iCloud%20keeps%20overwriting# 18790074 
    My situation is similar, and yet a little different.
    I accidentally deleted a group in my address book.  So, with my handy dandy Time Machine backup, I quickly went into Time Machine, and restored the group.  However, I was connected to the internet, and iCloud promptly deleted the nicely restored group.  So I went into Time Machine again, and restored the username/Library/Application Support/Address Book folder.  Again, opened the Address Book, was content to see my group was intact and there.  After about 20 seconds it disappeared before my very eyes.  I was now starting to get frustrated.  iCloud had again erased my ‘restored’ group.
              I promptly disconnected from the internet, restored my address book, and exported a copy in abbu format.  I then reconnected to the internet, and as I expected, iCloud once again deleted my ‘restored group’.  I then imported my abbu ‘backup’ file, and everything was once again intact… for about 20 seconds before iCloud again deleted my group. 
              Ignorantly, I deleted everything in my address book (while connected to the internet).  I then allowed iCloud to update everything.  After it seemed like it was done (it doesn’t tell you what is going on).  I went ahead and imported my abbu file.  This again resulted in nothing in my address book.  I again disconnected from the internet, and imported the abbu file.  I then exported all my contacts and each group in the vcf format.  I started importing each group into iCloud.com online, and everything was working smoothly.  Then, it started getting errors, and not importing all the contacts. 
              OBVIOUSLY there is a bug, or problem, or something wrong here.  iCloud is being extremely stubborn, and extremely un-friendly to it’s user.  I’m kind of at my wits end with this.  If anyone has any ideas, I really could use some help  I think that iCloud could use some help too.  Perhaps some lessons in politeness.  Perhaps a lesson in ‘restoration.’ Perhaps a compatibility with Apples own Time Machine???  Please any help would greatly be appreciated!
    Shane

    I don't know why you moved the app. Move the application back into your "Applications" folder which is where it belongs and should always stay. Then drag the app down to your Dock, if the Dock icon is not there already.
    Now, open AddressBook. The click on the TM icon on your Dock. Now do you see the TM screen with AB open? Good. Use the TM time arrow back button until AB appears the way it used to be. Then click restore.
    -mj
    [email protected]

  • How can I restore an iPhoto library from Time Machine (ML) - when I TM doesn't see the backup??

    Hi,
    I recently did a Time Machine backup of my MacBook Pro (Mountain Lion) onto an external HDD. Around the time of the last backup, my system was behaving funny so I decided to rebuild the OS X.
    Because the last TM backup was of a system that as mentioned, was somewhat 'unstable', and I only had a few backups available (didn't have TM running too long beforehand) - I decided not to use TM to 'restore' my system. I just did  a clean install of ML and planned on pulling files over manually. I'd done this before and it worked a treat.
    This time ran into a snag. The backup disk TM used was an external HDD which I wanted to upgrade (suffice to say it works fine). So, I needed to move the backup.backupdb directory to my other HDD. The copy seemed to work fine ... so far so good.
    I installed the new ML OS on my MacBook Pro and that was fine too. I was able to pull most of my files over by going into the TM backup and copying what I needed.
    BUT, for some reason, this didn't work for the iPhoto library?
    Alas, I found that you need to do a 'restore' iPhoto library file from whithin TM. So I fired up TM and noticed that it didn't recognise the old backup file located on the HDD. I.e. when I turned on TM, pointed it to the external HDD (where I copied the previous backup to), it started a fresh backup.
    So ... my question is - "How do I restore the iPhoto library if I can't get to it from TM?"
    Thanks in advance to anyone that can help! The last 15 years of photos are stored in this library!

    Hi ...
    I've found a solution to my problem.
    Time Machine locates extenal HDD backups differently depending if they were done via a network or via a USB/FireWire/Thunderbolt connection.
    My initial backup was done via a direct Thunderbolt connection. I ran into the above issue b/c the second time when I tried looking for the backup file the HDD was conencted to my iMac and I was accessing it via a network conenction.
    I simply connected the drive directly to my MacBook pro and ... voila. I was able to see the backup, select the iPhoto library and begin the restore.
    Hope this helps.
    BTW - I found this out by reading the 'blue box' selection on this page: http://pondini.org/TM/E2.html
    (Thanks goes to Pondini!)

  • How can I restore my iTunes library via Time Machine after an erase/install and upgrade to Snow Leopard?

    Actual problem:
    I reinstalled all my programs that I need without a hitch. Meanwhile, I've been trying to recover the few files (mostly music) I actually store on my computer's hard drive as opposed to on my external HDs. I use one external HD for my graphic files and the other is strictly for Time Machine backups. I tried to recover my iTunes music, but I got a message that says: "The file: "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes." I restored (I thought) my iTunes library Username/Music/iTunes." Additionally, I was going to upgrade to Mountain Lion, but I have seen that there were issues with Lion and iTunes libraries so I'm a little wary of this.
    Excuse the long explanation, but I figure the problem may possibly be in the details of the weeks prior this problem:
    I have recently been having issues with my iMac. I brought it in to see a Genius twice within the past month and they couldn't seem to find the problem. (It would restart Finder of it's own accord while I was using Adobe CS programs) I figured it was worth backing everything up via Time Machine and doing a complete erase/install/factory reset. I did so and had a problem again, and brought it in again, third time. The Genius did another diagnostics tests and found nothing and said my erase/install probably did the trick, but time will tell. I am, after the erase/rewrite and upgrade running Mac OS X 10.6.3 and previous to this was still running Tiger.

    So, I didn't update iTunes and the rest of it after installing Snow Leopard. My stupidity, I figured that the OS was more up to date than the one I had previously so that all the programs that come with it probably were more current than the ones I was using. However, now that I have updated all my software, I am still getting the same message from iTunes that I was previously. I cannot open iTunes at all, same "The file: "iTunes Library.itl" cannot be read because it was created by a newer version of iTunes." message. I'm confused again. Checked a few other threads and whatnot and cannot seem to figure this out.

  • Can you restore 10.5.8 from Time Machine after installing 10.6?

    After problems with Mail, I'd like to go back to 10.5.8 to get my files back. Can you use Time Machine to restore the whole system?

    Yes. Check Pondini's tips in the Leopard Time Machine forum.

  • I have Photoshop Elements 10 on a new Mac, using Yosemite 10.1.1 - PE locks up every time I try to sign in. This software was restored to this computer from Time Machine after a theft of my old Mac. How can I fix this?

    I have Photoshop Elements 10 on a new Mac, using Yosemite 10.1.1 - PE locks up every time I try to sign in. This software was restored to this computer from Time Machine after a theft of my old Mac. How can I fix this? It keeps telling me that there are missing files, too. If I upgrade to Elements 12 or beyond, will this fix the problem?

    You can't sign in because there is nothing to sign in to. For PSE 10 the only sign in was to photoshop.com, which has been dead and gone for a year and half. Just skip the sign in. Reinstalling will not change this.
    PSE 8, 9, 10 Can’t Sign In, Error 404 | Barbara's Sort-of-Tech Blog
    PSE is locking up because it's looking interminably for the non-existent photoshop.com server.

  • I was using osx 10.5.8 and upgraded to mavericks 10.9.4,after when restoring all my data from time machine ,the new mavericks os was replaced by the old OS 10.5.8 any solution

    I was using osx 10.5.8 and upgraded to mavericks 10.9.4,after that ..when restoring all my data from time machine ,the new mavericks os was replaced by the old OS 10.5.8 ...any solution to get back to the upgraded mavericks OS????

    Hi, how did you get MavX from 10.5.8, since it requires 10.6.8 to get MavX from Apple's App Store?

Maybe you are looking for

  • Cannot display the folder. Microsoft Outlook cannot access the specified folder location.

    Hi, guys I cannot view delegate mailbox in Outlook. Following is my configure. I have two mailbox A-User and B-User Login Outlook as A-User, click File -> Account Settings -> Delegate Access, add B-User and give Editor permission of Inbox. Right clic

  • Open Sub Report in New Window

    Hi, We have an application which is integrated with crystal reports. So when you open a report from the application it opens up in a new window. (Ours is a web based application and crystal reports opens up in IE browser) We have some reports which h

  • How to convert dd/mm/yy in ddmmyy in java

    Can any one tell ,how to convert dd/mm/yy in ddmmyy in java

  • Weblog and Groups

    I have the weblog up and running on our 10.4.8 server. I can log in to weblog with my short username and password. So now I would like to create a group weblog so multiple users can make entries to a single blog. In WGM I created a group called "Tech

  • Doubt about actions.xml with actions and roles

    Hi all, we are using a file like actions.xml for use them in Web Dynpro applications describing actions like: Is it possible to describe GROUPs assigning roles to them in the same XML instead of doing this using the useradmin application? We need to