How can I return my elements 13 windows (just bought) because I need it for a Mac (this elements also just bought).?

how can I return my elements 13(just bought) because I need it for a Mac (this elements also just bought(.?

Whats with the MBP lid? Dont close it ... if you're so concerned! Just go to System Preferences/Energy Saver and set it to how you like it.

Similar Messages

  • Our home network has multiple devices connected by iCloud. Having problem with Calendar. On one iMac, all the events are duplicated. How can I correct that problem? Under the Calendar accounts, I had my Apple id listed and also just iCloud.

    Our home network has multiple devices connected by iCloud: 2 iMacs, 2 iPhone 4s, 1 MacPro Laptop, and 1 iPad 2.  When using Calendar, all the events were
    duplicated on my husbands iMac.  On his computer, under Calendar accounts, I had included iCloud and also my iCloud ID.  I thought that because I had two accounts listed that were connected to iCloud, that might be the cause of the duplication.  When I deleted ithe calendars from one of the accounts, it resulted
    in deleting all of the events on all of our network devices!
    I have since entered some new events into Calendar from my iMac and from my iPhone.  These appear correctly on all devices except my husband's iMac where they are again all duplicated.
    I have two questions: 1)  How can I eliminate the duplicated events on my husband's computer and 2) How do I retrieve the old wiped out Calendar events from
    Time Capsule.  I don't know how to find Calendar in the Time Capsule.  If I find the Calendar information in Time Capsule, how do I transfer it to my current Calendars?
    I was obtaining phone help from one of the Apple techs at Apple Support, but our call was disconnected part way through.  Didn't know how to reconnect with the tech.
    Thanks for any help.

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.

  • How can I unlock my iPhone is with tmobile and I need it for att

    How can I use my iPhone 5 it was from t mobile store but I need it for AT&T

    Since you bought it from T-Mobile, T-Mobile will unlock the iPhone if you have had service wit T-Mobile for 45 days and the phone must be paid off through T-Mobile with no balance owed.
    This is for US bought T-Mobile iPhones in the US.

  • How can I return multiple values with PL/SQL Web Services

    Hi,
    I'm new to developping Web Services. I'm doing some tests with JDeveloper and OC4J on my local machine with a Web Services based on a PL/SQL function within a package. Right now that function only returns one value. So the xml response only has one output.
    I'd like to know how can I return multiple values with my PL/SQL Web Service. For example, if I want to return an employee's name and id? And that the xml contains two output : <employee>, <empid>?
    Reginald
    ps : I have searched the forum and I couldn't find an answer to this question, if that has been discussed AND answered before, can you please post the link? Thanks

    Alright, I actually found my answer. Since this was asked I think as a followup somewhere else I'll give my answer.
    It is very simple, all you have to do is create an Object Type and then Return that object type. After that, JDeveloper will take care of everything and you will have an xml response with multiple values. Here
    {color:#ff0000}
    create or replace TYPE person AS OBJECT
    ( id_interv number,
    first_name VARCHAR2(50),
    last_name VARCHAR2(50),
    date_birth date
    );{color}
    Then your function used in your Web Service should look something like this :
    {color:#ff0000}
    function info_emp (p_empno IN VARCHAR2) RETURN person AS
    l_emp person := person(-1,'','','');
    BEGIN
    SELECT first_name
    ,last_name
    ,emp_no
    INTO l_emp.first_name
    ,l_emp.last_name
    ,l_emp.emp_no
    FROM emp
    WHERE upper(emp_no) = upper (emp_no);
    {color}
    {color:#ff0000}
    RETURN l_emp;
    EXCEPTION WHEN NO_DATA_FOUND THEN
    l_emp := person (-1,'n/a','n/a','n/a');
    RETURN l_emp ;
    END info_emp;{color}
    {color:#ff0000}{color:#000000}After that, this is what the xml response looks like :{color}{color}
    &lt;first_name xsi:type="xsd:string"&gt;John&lt;/first_name&gt;
    &lt;last_name xsi:type="xsd:string"&gt;Doe&lt;/last_name&gt;
    &lt;emp_no xsi:type="xsd:string"&gt;0250193&lt;/emp_no&gt;

  • How can I return to use OSX (Yosemite) after installing Windows 8.1?

    How can I return to use OSX (Yosemite) after installing Windows 8.1?
    I cannot find Boot Camp on my iMac (late 2013) with windows installed. So I downloaded it, but I cannot run it because of an error (x64...). I tried to use my USB stick with bootcamp installed but nothing. When I turn my iMac on it starts automatically with windows. I tried to search it, but I found only the setup and it doesn't work. How can I get back to my APPLE iMac? How can I use OSX?
    Excuse me for the (maybe) uncorrect language, I speak Italian.

    Hello!
    You can start your Mac up with the [alt] (sometimes [option]) key pressed and you will get the Startup Manager.

  • I just upgraded on May 11 and find I cannot open a fold for bookmarks. I research and bookmarks are my lively hood. How can I return the bookmark functionality?

    MS 7 and long time user of Firefox so this is the recent upgrade of May 11. Unlike the prior bookmark functionality, I cannot indicate I want to bookmark a link and designate a new folder for a new topic in two to three clicks. This is critical to what I do for a living. How can I return the prior format and be sure bookmarks are backed up automatically. Does going back to the older and more functional tool bar restore this? And why does clicking the bookmarks toolbar show getting started, most visited and the printer icon? Getting started takes one to a new user set of instructions. But there are no functional operations in the tool bar? I am not going to go thru a lot of commands, this should be a automatic as before.

    '' the bookmark facility is not functional in 29 ... Bookmark puts all bookmarks there into "recently bookmarked" ''
    It does not.
    It works much the same as the old system does. Or at least it should do and does do for me.
    * Carefully reads the following article so you are certain what should be happening '''[[How to use bookmarks to save and organize your favorite websites ]]'''
    # From an unbookmarked page click the bookmarks star.
    #* That results in the bookmark being added, and yes initially it is just as an unsorted bookmark. (No doubt that is where most people put most bookmarks)
    # IMPORTANT click the star a second time. (But not so rapidly it counts as a doubleclick)
    #* You now have the options you had in the old version of Firefox <br /> Create new folders <br /> Save to a recently used folder <br /> Show all bookmark folders - and expand nested folders
    If your bookmarks are not working possibly the file is corrupted in which case see
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox#Damaged_Places_database
    I am hoping it is just that you are doubleclicking the star too quickly.

  • Just upgraded my 3GS to OS5. AoK. But audio spelling assistant is now MALE!  How can I return to the lady voice for spelling suggestions? thanks for any suggestions.

    Just upgraded my 3GS to OS5 - AoK But spelling assistant is now MALE!
    How can I return to the lady's voice for spelling  suggestions?  - should be possible?
    Thanks.

    Just to close out ... the 'supervisor' was clueless as it turns out.  Apple does NOT have a deal with UPS on handling the Mini, so the person who gave me the info was wrong.  Did he call back?  No ... he just let me go out and find out myself.
    So I called again, and this time eventually ended up with a manager, who told me that the UPS Store thing wouldn't work, but that a box would arrive and then there would be a 'forced replacement'.
    About 10 minutes later he called back and said he discovered that EVERYTHING the supervisor did was wrong ... he didn't actually properly flag for auto-replace, so I would have gone through an identical cycle again!  So he had to restart the whole process, meaning I would get TWO 'coffins', but that I would then get an auto-replacement and would see that indicated in my support email.
    I got the email, saw 'auto-replace'.  Got the box on the 28th and immediately turned it around.  Apple got the box on the 31st, and on the 1st I got emails that my Mini would arrive on the 2nd and it also had the new serial #.
    Yesterday I grab the box from FedEx and go home to check it out.  As expected, it IMMEDIATELY worked on my WiFi without issue ... and has worked perfectly since.
    So ...
    - it was NOT my home network.
    - it WAS a hardware issue with the Mini
    - Apple does NOT do proper testing on the Mini to detect what appears to be a fairly common issue.
    - non-retail customers ARE treated as second-class by support.
    This issue took FOUR WEEKS to resolve, involved FOUR shipments back & forth, and the ONLY reason it got resolved was that *I* did the troubleshooting that Apple either would not or could not do.
    For someone who has been an Apple customer for more than 30 years, this has been a sobering experience ... I quite frankly expected much better from them.

  • HT201269 I just found someone's damaged Iphone5 (?) how can I return it to them?

    I live near a major University and just found someone's lost/damaged IPhone5. Screen is cracked but it will power up, not legible though. How can I return this to the Owner, named Merideth?

    If you can tell who the carrier is, turn it in to them. They should be able to get it returned to them. If you can't, you can try and take the SIM out and see who the carrier is that way.
    If all else fails, turn it in to the local police.

  • How can I return software that I can't use

    Just recently purchased Photoshop Elements 13 on line, however it's a Windows version and I'm using  Mac. How can I return this or get the correct software?
    Thank you
    Darlene

    Or are you merely asking how to remove the wrong version from your cart and haven't paid for anything, yet?  Since you said "return" that suggests payment and a serial number.
    If you haven't actually paid, then just edit your cart and delete the version you put there:
    My cart
    Once your cart is empty, go to the Products link at the bottom of every adobe.com page and click the Buy button next to Elements:
    Products

  • How can I return my ipad 1 to pre OS5?

    how can I return my ipad 1 to pre OS5?
    Ive been reading the forums all over the place to find the solution to my ipad 1 continually crashing. it does it mainly in safari and the app store.
    Its really annoying when you're halfway through composing a long e-mail message and it just reverts back to the home screen.
    I'm perfectly happy to give up the advantages of IOs 5, because I would rather have a stable machine (like it used to be) than use the cloud and multitasking. (I don't use them anyway). I know that some of my apps might stop working but its more important to me that the basics work.
    cheers
    Andy

    You cannot downgrade the iOS.  Once you upgrade, you're stuck with it.
    Part of your problem is that your iPad is old and it probably having difficulty keeping up with the data and protocols for the newer software.  It's probably time to send a note to Santa. 

  • How can I move my PC (Windows 7) iTunes library (with my cps ripped) to my Mac iTunes library?

    Just for my curiosity and knowledge,
    I have a PC (Windows 7) and a Mac (OS X 10.10).
    Both of them with the latest version of iTunes.
    Both of them with the exact music library (genre, artist, album, etc).
    All my music is coming from iTunes Store, so very easy to re download at any time I want with my Apple ID
    My PC (Windows 7) computer has a CD/DVD drive. I would like to RIP some music from my CDs and add them to my PC (Windows 7) iTunes library. 
    Once I finished, how can I move my PC (Windows 7) iTunes library (with my cps ripped) to my Mac iTunes library?
    Thank you so much

    If you've downloaded the media idependently to each library so far then thet won't be exactly the same as there are different naming rules for the files and folders in OS X and Windows. See Make a split library portable for some general advice. You can move a portable library between Mac and Windows, but there is a delay opening the library after each change of OS.
    tt2

  • How can I return to the top of an array indicator

    I have in my UI a 1D array indicator that I will navigate to and populate with different lists of items depending on other selections.  Always text elements.
    I have limited the number of visible rows to 20 max even though some lists will contain dozens if not hundreds of elements while others may have less than 10.  Problem is, if I scroll down the list for one population, then come back and the next list happens to have only 10 elements, the scroll bar is still way down where I had scrolled to earlier.  It is basically showing unpopulated positions in the array. (Not blank list items)
    How can I return the scroll position back up to the first element in the array when I populate it with a new list?  I looked through every property node and could find nothing.  Seems like there should be a method to refresh the display or it should go back to the top when you write a new value to it.
    Any thoughts?
    Thanks
    Doug
    "My only wish is that I am capable of learning each and every day until my last breath."

    Index Values, I think, is the property you are looking for.  Set the index to 0 to be at the top.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • When I open a file in Photoshop CS4, how can I resize My Open Window File?it is stuck on full screen

    When I Open a File in Photoshop CS4, How can I Resize My Open Window File? It is stuck on Full Screen?

    Which operating system are you using?
    On a windows os, usually one can just double click on the title bar in the open dialog.

  • How can we navigate between two windows of same component in webdynpro ABAP

    Hi
    how can we navigate between two windows( not views ) of same component in webdynpro ABAP. its an urgent requirement
    Thanks in advance.
    Regards
    Laeeq

    Hi Laeeq,
    You cannot navigate between windows of one component. You can only call a dialog box showing the contents of a second window, or you can embed the contents of a window of a different component.
    Just add all the views you need to the one and only main window of the component.
    Ciao, Regina

  • How can I get a small window to open when a link is clicked (AS2)

    Hi i,m developing a HTML site and used one animated flash button(AS2) I want a small sized window to open when a user clicks on a button.
    The window will contain information that i want to display.It dosnt require a normal 800x600 window to open. I just want a 1/4 size of 800x600 etc. Is this possible and if so how.
    I havnt done this before
    Thanks
    Manoj

    HELLO NED,
    I WAS RECEIVING MANY MAILS FROM YOU, BUT I DON'T UNDERSTAND WHY DOESN'T RELATED WITH MY PETITION, I SEND
    TO YOU AGAIN MY QUESTION, AND IF YOU CAN HELP ME I APPRECIATED VERY MUCH LET ME KNOW.
    THIS IS MY QUESTION....."ABOUT DATAGRID AS3
    Hello Ned, I appreciate very much your soon answer, I believe you have understand me, but how can I do that? could you give some help? This is part of the code and this is the function that I use
    var url: String = "xmls/rests.xml";
    var req:URLRequest = new URLRequest(url);
    var myLoader:URLLoader = new URLLoader();
    myLoader.addEventListener(Event.COMPLETE, completeHandler);
    myLoader.load(req);
    function completHandler(event:Event):void {
           var myLoader:URLLoader = event.currentTarget as URLLoader;
           var xmlDP:XML = new XML (myLoader.data);
           XML.ignoreWhitespace = true;
           dp = new DataProvider(xmlDP);
           dp = sortOn("name", Array.CASEINSENSITIVE);
           dDg.dataProvider = dp;
           aDg.addEventListener(Event.CHANGE, changeHandler);
           function changeHandler(event:Event): void {
                var thisItem:Object = eve.target.selectedItem;
                descripTa.text = thisItem.description;
                aUI.source = (thisItem.image);
                preloader_mc.visible = true;
    My intention is that when a button from a main (swf) loads the swf it displayed the first selected item with a image (UILoader) and the description (TextArea)
    Thanks in advance Ned
    Joselyn             .................."
    THANKS AGAIN NED
    REGARDS
    JOSELYN
    Date: Thu, 13 Oct 2011 07:49:02 -0600
    From: [email protected]
    To: [email protected]
    Subject: How can I get a small window to open when a link is clicked (AS2)
    Re: How can I get a small window to open when a link is clicked (AS2) created by Ned Murphy in Flash Pro - General - View the full discussion
    Look at the Methods section and choose whichever suits your needs, the first one listed does not.
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3969302#3969302
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3969302#3969302. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Flash Pro - General by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Maybe you are looking for