How can I RUN a download instead of SAVING a download to a file?

I downloaded a file, then tried to run the file from the download window. It comes up with an error that "install SWP32.exe is not a valid Win32 application" The website suggested that I "RUN" it directly from the website. How do I go about doing that? The download automatically goes directly to the download file. Then I have to go to the start-run- then go to the downloads....
What can I do?

As far as I know you can not change these keystrokes without changing the Program files. I am sure it is possible there, but I have no idea where to even start to tell you where to find it.
Your best bet it to go to the Keynote Menu>Provide Keynote Feedback and let Apple know you would like the option to change them.

Similar Messages

How can I run sequentially each SequenceCall that is present within a sequence file in NI teststand

I have a sequence file which tests a number of DUT's. Each DUT has its own SequenceCall within the Sequence File.
I have set up each SequenceCall to create a New Execution and run in Single Pass to create a separate report for each DUT.
My problem is that when the Sequence File executes, it Calls all SequenceCall's and they begin to run in parallel, I want them to run in sequence. I tried using the PreCondition and Evaluate Precondition option of each SequenceCall to make sure the first/previous SequenceCall had completed but this did not work, the Sequence File still called each SequenCall at same time.

Why are you spawning a new execution each time?
Next to the Exeuction Options there is a button with a hammer and a wrench on it. When you click on that you get the Sequence Call Advanced Settings. Change the Wait for Execution to Complete: to Before executing next step.
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

How can I get a downloaded application to run when security settings won't allow it?

I am trying to run an application today that I downloaded from Safari. I run this every single business day by control - clicking to open it in Finder. Today it won't allow me to open it all because of my security settings. When I temporarily remove my security settings it still will not let me open it. How can I run an application every time, when I want to run it, regardless of my security settings?
I am using Safari, Mavericks, and MacBook Pro.

Your control is allowing the app to run or not. I'm not sure what other type of control you could possibly mean since any app, once running, does whatever it does; you can't control any app past that point.
If you prefer not to disable the settings in the System Preferences, then right click on the app and choose Open. That will allow that app to run while still leaving the basic security feature on. You only need to do this once. The app will be assumed as trusted after that.

How can I purchase and download the standalone LR6 here at Hong Kong? There's no such option for me instead of forcing me to use the CC!

How can I purchase and download the standalone LR6 here at Hong Kong? There's no such option for me instead of forcing me to use the CC!

Try this link:
http://www.adobe.com/products/catalog.html
Otherwise I suggest you contact your local office for help:
Hong Kong office
Suite 4102, 41/F
The Lee Gardens
33 Hysan Avenue
Causeway Bay
Hong Kong
Tel: +852 2916 2100
Fax: +852 2970 2277

How can i get or download the apple hardware test for a macbook pro made in 2012 running Mavericks 10.9.3

Does anyone know how can i get or download the apple hardware test for a macbook pro made in 2012 running Mavericks 10.9.3. Thanks.

Sean and Andy -
I have to agree with Andy here. I am having the same problem on a mid 2010 MBP (6,2). I have already read the AHT info provided by Sean's link, and they are less than helpful. I'm sure they will be helpful to those who find that they work, but they are confusing if this is not the case. For example, my MBP(6,2) came with ONE (not two) installation disks, so the instructions don't work for me. Another issue is the instructions confound the descriptions related to the MBP, the original (delivered) software (OS X version), and the current installed OS X upgrade software.
So here's what does NOT work for me...
     (A) I cannot install 'Disk 2', since I never received this with my original (new) purchase in mid 2010.
     (B) I have checked my firmware versions and they are all up to date, as per Apple's information.
     (C) As suggested in another thread, I looked for /Library/Core Services/.diagnostics and it was NOT present. I followed his instructions, downloaded the correct (I believe) dmg, and installed it. It is in the correct place, and I can see all the invisible files using Pathfinder.
     (D) When I re-start holding down the D key (immediately), it just goes through the normal boot routine; no evidence of AHT.
     (E.1) When I re-start holding down OPT-D, I get a spinning globe, and then it prompts me for a network (wi-fi) connection.
     (E.2) For some unknown reason, the prompt identifies between 2 and 5 of my --neighbors'-- routers, but does not show mine. (??!!)
     (E.3) The routers are listed alphabetically; however, my router SHOULD be at the top of the list by this criterion, but it is nowhere to be seen.
     (E.4) The 'internet recovery' process then allows me to enter a network name AND password. I do this, for my current wi-fi router, and the process rejects it as an incorrect login ID. It is NOT an incorrect login ID!
So, now asking Sean and Andy (or anyone else) for further suggestions... ??? As Andy suggested, many people ask questions here because they have -already- worked through the 'official' recommendations, and have found them to be inadequate.
Any advice would be appreciated! TIA.
Ed

How can I run all tasks in sequence container in sequence instead parllel

Hi,
I Have a foreach loop container. in that container having multiple execute process tasks. when I am executing the package all tasks are running parallel instead of sequential.
so please kindly help me, how can I run the tasks sequential?
Thanks

As Sorna already wrote, connect the Tasks with a precedence constraint = green arrow, then they will be executed one by one.
Olaf Helper
[ Blog] [ Xing] [ MVP]

How can i run the java bean sample program download from OTN

hello to all
i have a p[roblem. i have downloaded the sample progam from oracle web site which is a java code that connect with the oracle and shows a form. how can i run the from.
can any body help me pleaSEEE
thanks
kamran ahmed

Hi Darryl.Burke
So your telling, we cannot run our Java Program when system shutdowns...In my application, when user has schedule for next days and he shutdown his PC. On the next day when System Started i should able to get back my schedule on the Specified time(I'm TimerTask class in Java)... How can i achieve this using Java? can u tell me clearly..

How can I tell the download size in mb of a movie before I purchase it? running short on storage space. Specifically American Horror Story II.

how can I tell the download size of a movie, in mb, before I purchase it? specifically, American Horror Story II. Need to see if i have enough storage left for download. thanks.

When you select the film, the size of each episode is under the titile.
Example:
1. Welcome to Briarcliff
46minutes, 1.98 GB for HD format, 622 MB for SD format.

How can i run the example programme without hardware

Hi,
We are using NI-9233 for our Project. We would like to run the example programme, the NI-9233 getting started(host).vi ... I would like to ask that how can i run the Programme without Hardware.& How shall i get the input signal (simulating signal)?because we would like to test it while we are waiting for the hardware to be delivered .
thanks
Best regards

As Mike indicated , " you can use MAX to simulate some (not all) DAQmx devices. There's a NI-USB-9233 device that you can probably use. Open MAX, then expand "My System", the expand "Devices and Interfaces", then right-click on "NI-DAQmx Devices" and select "Create New NI-DAQmx Device -> NI-DAQmx Simulated Device". Select the device from the list. See the online help for MAX for further help.
If you don't see "NI-DAQmx Devices" in MAX you need to install NI-DAQmx. You can download it from NI here. "
hi,
the link you gave me to download is "NI-DAQmx Devices" ... There is no software to download for Labview 8.2.1. So should i use 8.1 or 8.3 instead of 8.2.1 ? If not, can you tell me the CD no. that includes the "NI-DAQmx Devices" folder of Labview 8.2.1 version? Because we can get the cd from our school's component store. Thank you so much.
Best Regards,
Su

How can I run the report for different input values at the same time?

Reports version: Report Builder 6.0.8.13.1
Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
How can I run the report at the same time for all the input values and save the time?
Thanks in advance.
Kishore.

Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
and then atleast 4 or 6 reports will run simultaneously.
For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
Thanks
Subodh

Upgraded to OSX 10.8.2 and now I can't run any downloaded dmg files.

Upgraded to OSX 10.8.2 and now I can't run any downloaded dmg files. Says "the Following disk images couldn't be opened". and then say's there "isn't enough disk space" I'm pretty sure it has something to do with apps that are not approved by the app store. How can I turn it off?

Select your hard drive in the Finder and choose File -> Get Info. What is the available space?

How can I run 2 keynote presentations on 2 different macs with only one keyboard?

How can I have 2 different keynote presentations that I want to run simultaneously through 2 different projectors, but I'd like to try and avoid using 2 keyboards - and use a hardware solution, rather than relying on my 2 fingers!! (it's a long conference!!!) thanks for any help.

Open the CSS in DW, and use F10 to open the Code Inspector.
Place the
latter as needed.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Random_Yggdrasil" <[email protected]> wrote
in message
news:gi2htb$j4j$[email protected]..
> How can I run 2 Dreamweaver windows at the same time on
my PC?
> basically I have 2 monitors and I want to edit CSS on
one monitor and have
> the
> html page open on the other so I can quickly look from
one to another with
> in a
> split second instead of taking that extra time to switch
back and forth
> using
> the tabs at the top, I know I should probably invest
into a mac so i can
> work
> out side of the Dreamweaver application window and I
will in the future
> but is
> there any way i can do this on my windows XP pro PC?
>
> Thank you
> Maurice
>
>
>

How can I run a vi developed with 7 Express?

How can I run a vi developed with LabView 7 Express on another machine ? Do runtime versions exist ?

Apparently, you want to run it on a machine that does not have LabVIEW installed.
To make a standalone executable of your LabVIEW program, you need to have the Application builder (included in LabVIEW professional and higher, avaliable as an add-on for base and full).
To run the application, the target system need to have the LabVIEW 7.0 runtime installed (available as a free download).
There is also the LabVIEW Player. In this case you need to digitally sign your VIs and there are a few limitations. It is meant for for sharing code ideas and is not a viable substitute for the appl
ication builder.
Of course you could also get a second copy of LabVIEW.
Some other options that would work in a very narrow set of situations: Read your LabVIEW license agreement. Under certain conditions you are allowed to install a second copy of LabVIEW on your home computer. If this is for personal educational use only and you qualify, you could also buy the LabVIEW student edition.
LabVIEW Champion . Do more with less code and in less time .

How Can I Run a SQL Loader Job from Schedular

How Can I Run a SQL Loader Job from Schedular , So that It Runs every Day.

Depends on a couple of factors.
If you are on a UNIX platform, you can create a shell script and schedule it with cron.
If you are on a Windows platform, you can create a batch file and schedule it with the Windows scheduler.
Or, if you are on Oracle 9i or 10g, you could use the external table feature instead of SQL*Loader. Then you could write a stored procedure to process the external table and schedule it using the Oracle scheduler (DBMS_JOB). This would probably be my preference.

How can I run 2 Dreamweaver windows at the same time?

How can I run 2 Dreamweaver windows at the same time on my
PC?
basically I have 2 monitors and I want to edit CSS on one
monitor and have the html page open on the other so I can quickly
look from one to another with in a split second instead of taking
that extra time to switch back and forth using the tabs at the top,
I know I should probably invest into a mac so i can work out side
of the Dreamweaver application window and I will in the future but
is there any way i can do this on my windows XP pro PC?
Thank you
Maurice

Open the CSS in DW, and use F10 to open the Code Inspector.
Place the
latter as needed.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Random_Yggdrasil" <[email protected]> wrote
in message
news:gi2htb$j4j$[email protected]..
> How can I run 2 Dreamweaver windows at the same time on
my PC?
> basically I have 2 monitors and I want to edit CSS on
one monitor and have
> the
> html page open on the other so I can quickly look from
one to another with
> in a
> split second instead of taking that extra time to switch
back and forth
> using
> the tabs at the top, I know I should probably invest
into a mac so i can
> work
> out side of the Dreamweaver application window and I
will in the future
> but is
> there any way i can do this on my windows XP pro PC?
>
> Thank you
> Maurice
>
>
>

How can I RUN a download instead of SAVING a download to a file?

Similar Messages

Maybe you are looking for