How can I run all tasks in sequence container in sequence instead parllel

Hi,
I Have a foreach loop container. in that container having multiple execute process tasks. when I am executing the package all tasks are running parallel instead of sequential.
so please kindly help me, how can I run the tasks sequential?
Thanks

As Sorna already wrote, connect the Tasks with a precedence constraint = green arrow, then they will be executed one by one.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Similar Messages

How can you delete all the e mail at one time instead of one at a time?

How can you delete all the e mail at one time instead of one at a time?

you'd have to do it from the computer,

How can I backup all my apps and contains in my iPhone to iCloud?

I was trying to backup my iPhone to iCloud through my laptop. It was backing-up normally at first, but then, it stopped for a sudden. I retried again but its not been backup. I tried again for a several times and I did check my iCloud storage and it's nothing. It only appeared "Your iPhone has never been backed up to iCloud". I checked all my iPhone setting and as well as my laptop; it's all fine, nothing is wrong with it. But I just can't backup my iPhone to the iCloud.

Check the apps and features below the settings > iCloud
features that are activated on this list, they will be backed-up.

How can I edit ALL photos in an album at once instead of one at a time?

I have approximately 300 new photos in an album and would like to rename all of them 'Rome Vacation'. Is there a way to change all of the titles at once, or do I have to change them one at a time?
Thanks,
Paul

Photos Menu -> Batch Change
Regards
TD

I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?

I am running out of memory on my hard drive and need to delete files. How can I see all the files/applications on my hard drive so I can see what is taking up a lot of room?
Thanks!
David

Either of these should help.
http://grandperspectiv.sourceforge.net/
http://www.whatsizemac.com/
Or search 'disk size' in the App Store.
Be carefull with what you delete & have a backup BEFORE you start, you may also want to reboot to try to free any memory that may have been written to disk.

Multiple calendars have appeared on my Iphone and I am unable to sync all of them to my PC, running Windows 7 and Office 2010. How can I sync all the calendars to my PC, or, merge the calendars on the Iphone so there is only 1 calendar to sync?

Multiple calendars have appeared on my Iphone and I am unable to sync all of them to my PC, running Windows 7 and Office 2010. How can I sync all the calendars to my PC, or, alternatively, merge the calendars on the Iphone so there is only one calendar to sync?

If the hard drive that crashed is the one that stored the itunes library, be sure to restore the library from Time Machine (mac) or whatever backup you use on windows. That will get back your music. I suspect that the replacement drive has an empty itunes library and thus, perhaps, the itunes match used that to sync to its servers.
Try posting in the iTunes Match forum, you'll probably find more knowledgeable folks there.
https://discussions.apple.com/community/itunes/itunes_match

How can I clean all the junk files from my iMac so that it can run faster?

How can I clean all the junk files from my iMac so that it can run faster? Its been slowing down ever since I started using it.

Before doing anything, we might be able to help with your iMac issues here.
Please download, install and run Etrecheck.
http://www.etresoft.com/etrecheck
Copy/paste its report here in another reply thread so that we have a complete profile of your Mac's hardware and installed software.

How can I run a SubVi in background when a sequence is running in the main VI

What I want to do is this
When I push a button on the main VI, a SubVI (#1) must run and take data.
At the same time, a sequence, in which there are other subVIs must run.
My problem is that the subVI #1 does not run when I push the button. The sequence is running well. How can I run both the sequence and the subVI at the simultaneously?
Solved!
Go to Solution.

Hey Hugo,
Sounds like you'll just want to do some parallel loops. I'll attach a screenshot of a VI that has a sequence where the counter goes up to 3, then restarts, each time it reads the iteration count from the subVI above. (The subVI is just a while loop with the iteration count attached to the global)
Each iteration of the sequence shows an increased count from the subVI via a global variable.
Is this what you are looking for?
Keep in mind that I just threw this together to show functionality, its got a lot of rough edges to it.
Message Edited by Chris_VH on 03-30-2009 03:59 PM
Chris Van Horn
Applications Engineer
Attachments:
iteration.jpg ‏43 KB

I have a new IMAC 5k running Yosemite and when I log in I am asked a whole series of questions as to what keychain can access. How can I authorise all of these to be available upon login? Items concerned are such as "Talagent", "Messages agent" etc

I have a new IMAC 5k running Yosemite and when I log in I am asked a whole series of questions as to what keychain can access. How can I authorise all of these to be available upon login? Items concerned are such as "Talagent", "Messages agent" etc

Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
          Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
          Keychain Access ▹ Preferences... ▹ First Aid
There are four checkboxes in the window that opens. Check all of them. if they're not already checked. Close the window.
Select
          Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.
If you use iCloud Keychain, open the iCloud preference pane and uncheck the Keychain box. You'll be prompted to delete the local iCloud keychain. Confirm. Then re-check the box. Follow one of the procedures described in this support article to set up iCloud Keychain on an additional device.

Multiple calendars have appeared on my iPhone and I am unable to sync all of them to my PC running Windows 7 and Office 2010. How can I sync all the calendars, or, alternatively, merge them?

Multiple calendars have appeared on my Iphone and I am unable to sync all of them to my PC, running Windows 7 and Office 2010. How can I sync all the calendars to my PC, or, alternatively, merge the calendars on the Iphone so there is only one calendar to sync?

If the hard drive that crashed is the one that stored the itunes library, be sure to restore the library from Time Machine (mac) or whatever backup you use on windows. That will get back your music. I suspect that the replacement drive has an empty itunes library and thus, perhaps, the itunes match used that to sync to its servers.
Try posting in the iTunes Match forum, you'll probably find more knowledgeable folks there.
https://discussions.apple.com/community/itunes/itunes_match

Hi I am new on the Mac, I need help, how can I run my apps from my library on my Mac Pro? All my apps I was used in my iPad, thanks guys!!!!

Hi I am new on the Mac, I need help, how can I run my apps from my library on my Mac Pro? All my apps I was used in my iPad, thanks guys!!!!

The Mac OS X and iOS versions are separate products

How to get running Daqmx task handles

HI,
We are creating a TestStand module using CVI 8.5, in that module we have to close all the running Daqmx tasks, please provide help on how to get running Daqmx task handles. We could not find any API function which can return list of running Daqmx task handles so that we can close one by one.
Thanks in advance for the help

I just had a similar issue. Stumbled on this forum in the hopes of getting an answer and found no reply to the original message. I think this is what we are both looking for DAQmxGetSysTasks.
I havent used it yet. Still in the excited I found something stage.

How Can I Run A SQLJ Normal Project In SAP NWDS

I have a question about SQLJ in SAP NWDS.
1.I created a java dictionary project,and then create the table , then depoly it.it's ok.
2.I created a java normal project including the above java dictionary project.
3.I used the SQLJ tech in the java normal project,exporting the opensqllib.jar,sqljapi.jar,sqljc.jar,sqljimpl.jar.
4.I coded the normal project,and export the project .jar,everything is ok.
<b>5.But when i runed the project in NWDS,the error appeared:java.lang.NoClassDefFoundError: com/sap/sql/log/OpenSQLException
at com.ezkj.deom.sqlj.MainApp.main(MainApp.java:21)
Exception in thread "main"</b>
How Can I Run A SQLJ Normal Project In SAP NWDS?
PLS Help me and don't let me alone!

Tony,
Why not try to import your SQLJ project in SAP NWDS. Add all the jars mentioned to the project path both for compile time as well as runtime. Now try running he project. Once you are able to bypass java.lang.NoClassDefFoundError, you will get other errors related to SQL statements. These Oracle SQL statements needs to be converted to OpenSQL format.
Chill out!!!
Sukanta Rudra
Note: If helpful, plz donate some points.

How can I run the report for different input values at the same time?

Reports version: Report Builder 6.0.8.13.1
Oracle version: Oracle8i Enterprise Edition Release 8.1.7.0.0
I want to run the same report for different input parameter values and spool each o/p to different file and ftp to a server. For this, as a first step, I am spooling different input values in to a file, reading those values through a loop and calling the report for that input values. Each report run/execution is taking 15 minutes. Total report execution is taking approximately 4 hours (assuming 16 different input values) to complete. So I have to wait 4 hours to see ALL outputs.
I would like to run the report parallel for ALL the input values and I should be able to see the ALL outputs with in 15 or 16 minutes.
In my shell script, I added & symbol at the end of the report call to start/run the job in the background. Due to this the control passed to the next step after the report call. At this place I have an ftp command to send the output file to a different server and it is giving error some thing like o/p file is not available/created yet". This is due to the fact that report writer is NOT yet completely started/initiated or it is NOT completed the spooling.
How can I run the report at the same time for all the input values and save the time?
Thanks in advance.
Kishore.

Increase the number of server engines running right now it seems there is only one engine running ,increase it to 4 or 6
and then atleast 4 or 6 reports will run simultaneously.
For FTPing the output add to your sript to check whether it is locked and if not then only try to ftp .
Also for more better functionality read the document (chapter 15 ) for 10g reports for its new fuinctionality.
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/toc.htm
Thanks
Subodh

How can I transfer all my info from my old mac to a new one?

how can I transfer all my info from my old macbook to my mac mini?
My Mac mini chash about one month ago and I got it back from apple, I didnt have a time michine back up for this one but in my old mac I have almost all my files, so I want to transfer all the data to the Mac mini with no problem

You can use migration assitant which is located in the Utility Folder under Applications. The compters can be connected via ethernet, fire wire, or wifi. My recommendation is not to use wifi.
You run migration assistant on both machines and you can choose to transfer everything or just data.
Another way is to use migration assistant to restore from a time machine backup.

How can I run all tasks in sequence container in sequence instead parllel

Similar Messages

Maybe you are looking for