How can i safely bring an 27 inch imac from us?

how can i safely bring an 27 inch imac from us?

Only your airline can answer if you can bring it as checked luggage or what it will cost to do so. You should compare that cost to what a shipper will charge.
In addition to the other comments concerning packing, I would recommend you use the original packing material  if you still have it. The box it came in was designed to ship the iMac long distances safely.  If you want to add to the original package then put the original box into something else.
good luck

Similar Messages

  • How can I have my 21.5-inch iMac replaced?

    In October last year, I decided to buy a 21.5-inch iMac, but I have had a few problems since receiving it in November last year.
    Firstly, about a month after receiving the iMac, my son noticed a grey "mist" forming underneath the glass display. Due to it being beneath the glass, I was unable to clean it. I took it to an Apple Store where they removed the display and explained that it was caused by my partner and myself smoking around it. Since we discover that smoking had caused the "mist", we have had a total ban on smoking in our home, but I have recently noticed that a "mist" seems to be forming underneath the screen again. Only this time I do not know how nor why.
    Additionally, we are unable to play DVDs on the iMac. During some DVDs, the DVD Player application becomes unresponsive and displays the "skipping over damaged content" message, and other DVDs are ejected a few seconds after being inserted. Strangely enough, CDs seem to work without any problem. There is no issue with any of the DVDs as they are all in perfect condition, undamaged and work on other DVD players in our home. I have read online that if the iMac is still under warranty, I should be able to have the SuperDrive replaced, and that may fix the problem.
    However, since I am still having issues with the reoccurring "mist" under the display, despite having had the problem "fixed" and taking precautions to prevent it from happening again, I would prefer to have the iMac replaced. There is no issue with content on the hard-drive as it is relatively new. I would also like to mention that when we received it, there was a "dead-pixel" in the centre of the display that is still present and does bother me when using it.
    I am happy I brought it as it is a very good computer, but these small faults are very annoying and are ruining our experience with owning an iMac. I was wondering if someone could perhaps advise me on what to do? It is still under the one-year limited warranty, and I have an AppleCare Protection Plan, but I have yet to register it incase I have my iMac replaced, or would the AppleCare Protection Plan be transferred to the new iMac if it is replaced?
    Thank you.
    *Additional Details*
    The "mist" is like a greyish tar on the underside of the glass. It extends from the far left corner with a radius of approximately 5-inches. It is located only on the left of the display and is visible when the iMac is switched off, and when the iMac is switched on. When switched on, the "mist" is not as visible, but it dilutes the colours of the pixels, thus making it visible. The coloration of the pixels in the "misted" area appears less saturated, with some small areas appearing almost black-and-white.
    This "mist", as I have described it is very much a problem. Over time, it appears to be moving down the display towards the bottom left corner.
    Message was edited by: Patricia Bywater

    As the anti-smoking people will point out at every turn, that stuff gets into EVERYTHING, and you'll never get rid of all of it. It's like the joke about Indian food, and how you have to burn the house down to get rid of the smell.
    The "mist" is likely remnants of the tar from the cigarettes. It doesn't matter if you're smoking outside or 10 miles away, it will get on your hands, in your clothes, you'll even exude it from your skin. It could also be that this is just whatever managed to get into the system before you took it in to be cleaned off the first time. It may take a few more cleanings before it's more or less gone. You will probably never be completely rid of it, but the problem will likely decrease in frequency if you continue to smoke elsewhere.
    Personally, I wouldn't push this issue too much. They probably would have been well within reason to just void your warranty when you took it in the first time. They didn't so, take that as a gift. You keep pushing the replacement idea, you may find you run into someone who has no problem just saying that you've damaged the system, and refuse to service it.
    Now, the DVD thing could also be a result of you having smoked in the house. That tar and other garbage in cigarettes is just as bad for electronics as it is your lungs. It will have a way of coating, and sticking, to things where you don't want it coating or sticking. Like the lens that focuses the laser to read DVDs. That has to be very precisely calibrated for it to work. Anything that messes with the focusing of that laser is not good.
    However, since you have other devices that work, and presumably have been exposed to the environment of your home for far longer, you probably just have a bad drive, and you can get that replaced. You can also ask them nicely to clean off the glass again since they have to take it off to replace the drive. But I would not take my chances if they give you any kind of resistance to that idea. You can go on all you want about how unfair you think it is, but unless you're willing to take it to court, where your odds of success are probably pretty low... Unfair or not, that's how it is.
    The AppleCare plan I'm torn on. Normally I'm all for this, but I'd hate to see you end up wasting your money because they decide that the effects of smoking are the cause of the damage, and thus lumped in with things like liquid damage. I'd call Apple's AppleCare department, decline to give the serial number for your system, and just ask them what their policy is on smoking related incidents as far as warranty claims go. Then you can make a decision about whether or not you want to return the AppleCare package for a refund, and your system won't necessarily be flagged, unless they do it at the store.

  • How can I restore my music to my imac from my ipod?  Imac hard drive crashed and I lost everything.

    My hard drive on my imac crashed and I want to restore my itunes libraries from my ipod....how can I do this?
    Thanks!

    See this user tip from another forum member turingtest2:https://discussions.apple.com/docs/DOC-3991
    B-rock

  • External hard drive that stored music has crashed.  How can I safely get my songs from my I Pod back onto computer in a new external drive?

    External hard drive that stored music has crashed.  How can I safely get my songs from my I Pod back onto computer into a new external drive?

    See this older post from another forum member Zevoneer discussing different ways to copy content from your iPod back to your PC.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • Hello everyone. I've got a macbook pro running on mac os x 10.6.8; trying to set up norton antivirus and it requires mac os x 7 or later. How can I safely upgrade to mac os. 7?

    Hello everyone. I've got a macbook pro running on mac os x 10.6.8; trying to set up norton antivirus and it requires mac os x 7 or later. How can I safely upgrade to mac os. 7?

    leroydouglas is correct, DO NOT install Norton or any other commercial anti virus software.  They all work very poorly with Macs.  If you insist on AV software, consider Sophos, it is free.
    If you do wish to update your OSX, here are the available options:
    http://store.apple.com/us/product/D6106Z/A/os-x-lion?find=lion
    http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion
    http://www.apple.com/osx/how-to-upgrade/
    Ciao.

  • How can I safely clean my Mac of old folders etc to make it run faster?er

    How can I safely clean my Mac of old folders, etc to make it run faster?

    The only real and safe way to do this is to do it manually  looking through each folder individually.
    Many third party utilities claim to clean out a hard drive of various detritus, but some times will delete data that it shouldn't  and delete any other  important data that it shouldn't have.
    The only "safe" way to accomplish what you need to accomplish is to do this manually.
    Stay away from the OS X system folder!!!!!
    Hard drive getting full?
    You can download an app called OmniDiskSweeper.
    This app will allow you to see where files maybe able to be delete are located.
    If your Mac is running a fairly recent version of OS X, here are some general guidelines.
    Follow some of my tips for cleaning out, deleting and archiving data from your Mac's internal hard drive.
    Have you emptied your iMac's Trash icon in the Dock?
    If you use iPhoto, iPhoto has its own trash that needs to be emptied, also.
    If you have images stored in iPhoto,,the only way to weed out duplicates is to do this manually.
    When you delete them, they go to iPhoto's Trash. Remember to empty this when you are done.
    If you store images in other locations other than iPhoto, then you will have to weed through these to determine what are duplicates and what isn't
    If you use Apple Mail app, Apple Mail also has its own trash area that needs to be emptied, too!
    Other things you can do to gain space.
    Delete any old or no longer needed emails and/or archive to disc, flash drives or external hard drive, older emails you want to save.
    Look through your Documents folder and delete any type of old useless type files like "Read Me" type files.
    Again, archive to disc, flash drives, ext. hard drives or delete any old documents you no longer use or immediately need.
    Look in your Applications folder, if you have applications you haven't used in a long time, if the app doesn't have a dedicated uninstaller, then you can simply drag it into the OS X Trash icon. IF the application has an uninstaller app, then use it to completely delete the app from your Mac.
    Download an app called OnyX for your version of OS X.
    When you install and launch it, let it do its initial automatic tests, then go to the cleaning and maintenance tabs and run the maintenance tabs that let OnyX clean out all web browser cache files, web browser histories, system cache files, delete old error log files.
    Typically, iTunes and iPhoto libraries are the biggest users of HD space.
    move these files/data off of your internal drive to the external hard drive and deleted off of the internal hard drive.
    If you have any other large folders of personal data or projects, these should be archived or moved, also, to the optical discs, flash drives or external hard drive and then either archived to disc and/or deleted off your internal hard drive.
    Good Luck!

  • How can you safely clean your magsafe and other ports on a macbook pro?

    How can you safely clean your magsafe and other ports on a macbook pro?

    MagSave, yes. Other ports cannot be safely cleaned although you can blow air in to clean out dust.

  • How can i safely segregate certain cookies (such as my bank's) so that i can use the delete all cookies feature but preserve those cookies?

    how can i safely segregate certain cookies (such as my bank's) so that i can use the delete all cookies feature but preserve those cookies? windows xp, firefox 13.0.1

    You can't delete all cookies if you want to preserve some of them.
    You will have to let all cookies expire when you close Firefox and create an allow exception for cookies that you want to keep and only clear cookies manually and not via Clear Recent History.
    *Tools > Options > Privacy : History: [X] Clear history when Firefox closes > Settings
    *https://support.mozilla.org/kb/Clear+Recent+History
    You can also consider to access website in Private Browsing mode if you do not want to store data to disk form those websites.
    *https://support.mozilla.org/kb/Private+Browsing

  • How can I reinstate/bring back the play trait after blocking it?

    I'm using version 1.0 of OSMF.
    I  block a bunch of traits while pre-loading another video:
    traitsToBlock=new Vector.<String>();
    traitsToBlock.push(MediaTraitType.LOAD);
    traitsToBlock.push(MediaTraitType.PLAY);
    traitsToBlock.push(MediaTraitType.SEEK);
    super.blockedTraits=traitsToBlock;
    When the other video loads I try to bring back the full set of traits with:
    blockedTraits=new Vector.<String>();
    and I see the following - because a new video has been loaded
    added trait  audio
    added trait  buffer
    added trait  time
    added trait  displayObject
    But I never see the playTrait.
    How can I reinstate/bring back the play trait?
    regards

    Reasons why you might not see the PlayTrait being re-added include:
    - your ProxyElement previously called addTrait with a PlayTrait of its own
    - the proxiedElement doesn't have a PlayTrait (i.e. it's not playable media)
    If neither case applies, please post a complete, small, runnable sample with source that demonstrates the problem.

  • I recently had to redownload itunes onto my computer, how can I safely transfer everything on my ipods to itunes without losing it all?

    I recently had to redownlaod Itunes onto my computer, how can I safely transfer everything on my iPods onto itunes without losing everything?

    The ipod is not a backup device.  The music sync is one way - computer to ipod.  The only exception is itunes purchases:  File>Transfer Purchases
    It has always been very basic to always maintain a backup copy of your computer, particularly before any restore, update, etc.
    Use your backup copy to put everything back.

  • How can I disappear the lines of the grid from the picture?

    Please help!
    This photo was made through a grid.
    http://www.flickr.com/photos/apexivision/4468964280/sizes/o/in/photostream/
    My question is: how can I disappear the lines of the grid from the picture with Photoshop CS2?  Thanks!!!

    Select the offending parts with a fuzzy-edged selection and adjust the curves to get some relief.
    Then Burn and Dodge can be your friends as well.
    Some things that can help:  Make a duplicate layer so you have the original to compare against (and to go back to as needed.  Work in 16 bits / channel and (ideally) at an upsampled resolution.  Add a Curves adjustment layer above with the curves pulled up so you can lighten up the shadows as needed and see that you're getting things right even in the dark shadows.
    You may need to do some selective noise reduction in the places you've enhanced, as the lightening and darkening will bring up the noise.
    -Noel

  • How can i measure BAPI runtime which has called from JAVA

    Hi abapers
    how can i get run time for BAPI called from JAVA through JCO.
    i know that i can use SE30 from ABAP by executing from SAP.
    may be ST05 useful for me i did it but when display trace
    i am getting big list by seeing this list i am not able to find the runtime for that BAPI.
    please any one can explain
    reagdrs
    ramesh

    Hi Ramesh,
       Irrespective of whether the call is from an external system or within sap, the bapi will be executed in R/3 only.
    So, you can safely measure the runtime using se30 only.
    If it is taking more time when called from JCo , then you can be sure that the problem is not with SAP and is actually due to the JCo connectivity with R/3.
    Regards,
    Ravi

  • How can I get iTunes to display the tracks from a CD in their original (album) order?

    To be absolutely honest, I don't really understand what this box is for, so I shall just use it to repeat and expand on my question. (I have already sent a "Feedback" comment on the same topic).
    How can I get iTunes to display the tracks from a CD in their original (album) order?
    It seems to me that there is something very basic wrong with the way iTunes handles CD Tracks.
    Professionally produced CD tracks are seldom if ever in a randomised order. Why then does iTunes seem unable to display the tracks in the order they appear on the original CD source - whether from a personally owned CD or from a download from the iTunes Store?
    Some music demands a specific, non-alphabetic sequence in order to make sense. Why does it seem that iTunes only offers Alphabetic, or reverse alphabetic order - both of which make a nonsense of the original, often intended order of tracks?
    Why not replace the so-called "cover-art" in the bottom left hand corner if the iTunes window - which, while it may look attractive to some, gives the barest of information concerning the original disc, with a list of the original CD tracks in their original order, so that the user can easily reestablish the order in which they should be played.
    As I would expect legibility might be a problem with doing this, why could not the original contents, (in their original order), at least, be displayed when the "cover art" is double clicked-on - the result of which at present gives me an enlarged version of the "Cover Art". While on the subject of the contents of the source disc, what about all the album notes which someone takes trouble to write in order to increase the appreciation of the music on the CD and the listener's general background knowledge of the artists involved. Such notes, it seems to me, have considerable intrinsic value in their own account. I would, I think, normally be prepared to buy such "Sleeve notes" - so long as a "taster" was supplied (as it is for the music) - for something like the cost of a single 'Tune" on iTunes.
    These two aspects let Apple iTunes down enormously, in my opinion. I think that by chopping even quite protracted sequences of music up into bits does no one any favours - except perhaps Apple's already quite substantial bank balance. People have to be aware that two and a half, to three and a half minutes is a very short time to develop a piece of worthwhile music, and that there are many, many composers, not all of whom are alive today who have written music that huge masses of mankind value for the enrichment of their lives and the human condition in general.
    Please make the viewing of iTunes tracks in their correct order by default possible. By all means have the alphabetical variations available as offering a different approach to the music, but not the sole approach to it - PLEASE.
    Frustratedly yours
    Alan Whitaker
    PS I work at my old 24" iMac Intel Core 2 machine which runs OS "Tiger" - because it is more beautiful to look at, the screen is more pleasant to work on, and because, in some ways it is more capable (it will run FreeHand MX without needing a "patch"), than my more recent 21.5" which runs "Snow Leopard". (I don't find it that much slower, either).

    Dear Mike
    Thanks for the support. I am utterly amazed that after all the hype about how good iTunes is that it cannot play a downloaded CD in the correct order, and that what that order should be is not available directly from within one's own iTunes installation. (I know that one can go back to the iTunes Store to check what the order should be, but having downloaded the tracks surely iTunes is clever enough to retrieve this important information.
    My iTunes to differ from yours in that I have also noticed that it seems unable to download copies of my "talking books" in the correct order either. But in my case it downloads them - from a CD - in order, but with the first track downloaded first - so that it appears at the bottom of the column of tracks so that it would get played last! (At least this is, while being inexplicable, a relatively "logical" bit of blundering and because of this is relatively easy to put right!).
    I like many genres of music, some of which are not really programmed except perhaps by the artist performing them. I know that Frank Sinatra was very careful to programme his album songs to obtain a particular effect and in relation to the keys of the music. iTunes presumes to know better.
    Film scores may be totally randomly put together, in some cases, but in others the order is vital to one's appreciation of the music as a whole and how it relates to the plot of the film.
    In symphonic music most works are divided into sections and are conceived by the composer that way. Some individual sections may gain a life of their own if played separately, but they are never complete in the sense that the composer envisaged them without being placed in their proper context.
    Opera and probably most choral music too, is similar except that the words may well become meaningless if the order is changed at the whim of a piece of ill-written computer code, while ballet music has to be heard totally within its sequential context or it becomes meaningless.
    Finally, I would venture that iTunes, by jumbling up the order of the tracks as recorded on a CD, does an immense disservice, not only to the music on a particular CD, but to music in general, by expressing everything in terms of "Songs" - which it seems to interpret as stand-alone items of between 2 and 4 minutes whatever the genre. Even the way the iTunes publicity speaks of how many "songs" it can store instead of how many minutes or hours of recorded sound. This has to be another brick in the wall of "dumming-down" of people's expectations, and the shortening of their attention spans.
    I don't know about anyone else, but I feel betrayed by Apple over this. Perhaps the look, feel and general presentation of an item are not the most desirable features of a consumer product. Maybe it should be judged more on it fitness for the purpose for which it was sold. There is one other possibility - that Apple are trying to redefine "Music" - and that everything that lasts longer than about 3.5 minutes or is in the form of what could for want of a better term be called symphonic in the broadest sense is something else - not "Music" within Apple's new definition, at all!
    Well that's off my chest! now I can get down to creating some sort of order in my iTunes Libraries, knowing that I have to reconsult all the sources in order to confirm the source playing order.
    Anyway thanks again. At least I know that it is not just me
    alanfromthatcham

  • Iphone4 would not restore Error -50. I have tried to restore and it restored it to the point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out.

    Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????

    It tells you to go to Error 13 and 14 if you receive error (-50).
    Here is what I have tried...
    Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
    Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
    Put a USB 2.0 hub between the device and the computer. Didn't change anything.
    Try a different USB 30-pin dock-connector cable.
    Eliminate third-party security software conflicts. Removed all virus protection and firewall.
    There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
    Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
    Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.

  • I have copied my CDs into iTunes  (currently running v11) to play on my iPod.  I have now bought a non Apple mp3 player to use when I am out running.  How can I copy the many tracks I want from iTunes onto the new player?

    I have copied my CDs into iTunes  (currently running v11) to play on my iPod.  I have now bought a non Apple mp3 player to use when I am out running.  How can I copy the many tracks I want from iTunes onto the new player?
    Thanks

    I tried Notpod but can't get it to work.  Part of the problem, I suspect, is that I can't create a folder on my player (a SanDisk Clip+).  I also can't do this in Windows Explorer.  Whilst I can see the Clip+ in Explorer, the option to create a new folder isn't there.
    The error mesag I get in Notpod is:
    "Unhandled exception has occurred in your application.  If you click Continue, the application will ignore this error and attempt to continue.  If you click Quit the application will close immediately.
    InvalidArgument=Value of '0' is not valid for 'SelctedIndex'. Parameter name: SelectedIndex"
    Then, when I plug the Clip+ into a USB port, iTunes thinks it is my iPad - which is because, I guess, Notpod hasn't worked.
    I can drag and drop files from the Music folder where my iTunes tracks are stored onto the Clip+ and they get converted but I'd rather synchronise a Playlist from iTunes if I can.
    Thanks anyone who can help

Maybe you are looking for

  • PK Columns in Tabular Form not able to hide

    Hello everyone, I'm running Apex 2.0 on 10.2.0.1 Standard Edition. When I create a tabular form on a table with a primary and secondary key, the primary and secondary key columns appear in the actual tabular form, despite the "show" checkbox being un

  • Creating a dynamic SQL query builder class

    I have a jobs table where each row contains information about jobs run on a machine. I have a web view of this database which shows different information and queries for this information are built using the following fields: TYPE TITLE NODE STATUS (a

  • Read Serial USB Input

    I am trying to read the inputs from an analyzer communicating with the computer through a USB port.  I have tried to use the RS232 Input module in DASYlab, but it always says it is waiting for a signal.  I have attached the protocol for the analyzer.

  • BW Administration Docs

    Hi I am an rookie in basis administration and I got a chance to prove my self to work on BW and SCM administration, can some one  please help me out in getting some information on this i.e.. how the administration differs from Basis to BW what are th

  • Purchase or wait ??

    I have been patiently waiting for ilife 08 as I really want to start to get my bands website looking more professionally ( I only have ilife 05 and have been using the foc package NVU ) and then I discovered I also need OS 10.4 onwards ( I still have