How can I save zoom setting for a DOCUMENT so it opens at that setting?

I find an optimal zoom setting for a document I'd like to use (say 42%) and want the document to open at that setting.  I save the document with File>Save Copy.  However when I open the document, it opens at the DEFAULT zoom setting set in the Preferences for program.  If I change the zoom level here to what I desire for that document, obviously all documents will open at that default setting.
How can I save my desired zoom level for a document, which will most likely be different for EACH document, and have the saved document open at that setting?
This seems like a trivial exercise / feature that should be easy to implement BOTH by the programmers of the software and the user setting the zoom level.
Also, I want to suppress the bookmarks sidebar.  I save without the bookmarks but the documents opens with the side bar.  Can't THIS be set for each document?
Why is it so difficult to tailor the viewing of a document to exactly what the viewer wants?

OK.  Sorry for the mistake in posting the question here.
Again it seems like it should be trivial to save a document in the Reader with a viewer's desired zoom setting.  I find this very helpful as I like to use a zoom setting that when scrolling down the document only one full page of the document is viewed (like turning the pages of a book).  Without this feature, partial pages are displayed when scrolling unless one experiments to find the correct zoom setting (often it is 60%).  One must do this every time one opens the same document, unless one remembers the zoom setting.
Oh well ....

Similar Messages

  • How can I save an e-mail to documents on our macbook Air?

    How can I save an e-mail to documents on our macbook Air?

    It's pretty impossible to figure out what you're really trying to do ...
    If you're literally trying to save an e-mail to your documents folder (which I doubt), then you can open the e-mail, do a File > Save As ... from Mail's menu and do it from there.
    Good luck.

  • HT1904 How can I get a refund for apps in the apple App Store that do not work and are not what they said they wer

    How can I get a refund for apps in the apple App Store that do not work and are not what they said they wer

    You've tried deleting and redownloading them and seeing if they then work and tried contacting the developers ? If you have and they can't/won't help then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • How can i save my annotations for future use?

    Hi,
    I have several ePub files in iBooks that I annotated, with the highliter as well as the post-it feature.
    Now how can I save those for fututre use? I'm not talking about iTunes sync/restore. I'm talking about removing the book from the iPad and use it back in, say, 4 years, or even pass it to someone else along WITH the highlighted sections.
    In a word: keep the book with the annotations on the side OR keep the book embeding the annotations.
    This is for ePub of course, not purchased in iTunes, but free books or purchsed ePub from external sources (like O'Reilly).
    After playing with DiskAid, I got a copy of the internal annotation database (my iPad is not jailbroken) and was able to see all the notes in it. But any existing tool to actually extract and link those notes to a specific book would be exactly what I would need...
    Possible? Hopefully yes...
    Thanks for any help.
    Steve

    Anyone?

  • How can I save a clip for later use?

    When I am editing a project and going through my footage I often find a short clip that I'd like to use maybe later in the timeline or possibly to use in a different project. How can I do that?
    This may be obvious but I want to rename and save that clip somewhere (I'm assuming the event library) so do I have to create a new clip from the original and save it or what?
    Again, sorry of this is basic but its these litle things that seem to be the hardest to find out but make the biggest difference to the workflow and editing speed.
    Cheers

    If this is a one-off thing, mark the clip as a Favorite.
    http://help.apple.com/finalcutpro/mac/10.0.6/#ver30ccd91f
    If you have a volume clips that you notice would be good for a particular purpose later, mark them with a keyword.
    http://help.apple.com/finalcutpro/mac/10.0.6/#ver68416335
    Then create a Smart Collection that contains clips with your keyword.
    http://help.apple.com/finalcutpro/mac/10.0.6/#ver7a77eb6c

  • How can I retrieve a password for a document?

    You won't believe this....
    I made a document in Acrobat 9 on my Win7 computer, password protected it, typed it in a 2nd time, then saved the document. Just seconds later, I went to test the document to make sure it'd open, so I tried to open it, and ..... it wouldn't open. It said 'wrong password'. So I must have had my fingers on the keyboard in the wrong home base position, and typed something other than I thought. I typed the same "password" with my fingers in different spots on the keyboard, but couldn't replicate the mistake.
    How can I retrieve a password?
    1) I thought there was something on computers where you could find out previous keystrokes, especially if you've not yet turned off your computer. I read one time where you do some steps then paste the results onto a .txt file, and it will show your previous keystrokes.
    2) I almost bought one of those Password Recovery software programs online last night from Daosoft. I wonder if they're a scam, or if they really work?

    You can't recover the password. If you could, I could have as well and the whole purpose of encryption would be moot. This is why it is a good practice to save the original PDF before you secure it.
    If the password that you created was a really strong one (other than word 'password' or some other word) I doubt that the password recovery programs would do the work. They are usually good only for fairly simple passwords.
    Acrobat X added new way of encryption that is almost impossible to crack and Acrobat XI added the password strength indicator which tells you how good the password that you're entering is.

  • How can i Save my Changes in a Document Location = SD-CARD ?

    i use kingsoft Office and i have a xls document, After update to 14.3.A.0.681 i can't save my changes.
    i can't add a new document on the SDCARD.   smileyangry:
    Why ???????  smileyangry:
    how i became the function back before 14.3.A.0.681 ???????????   
    cu

    This sounds like an issue with the app and compatibility so this would need to be directed to the developer
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • How can we save smartform output as word document

    Hi Friends,
    Can anybody help me, how to save Smartform output as Word document instead of PDF file.
    Thanks,
    Ramana.

    Hi Venkat,
    I think you can do it manually.
    After the print preview, Select the menu <b>Goto->List Display</b>.
    Now select the menu <b>System->List->Save->Local File</b>.
    Now you can select the radio buttion <b>Rich Text Format</b>.
    Now you save the document as a .doc file (say test.doc)
    That is it!!!!!
    <b>Award points if found useful.</b>
    Regards,
    SP.

  • How can I save my login for website ?

    My iPad no longer saves my login even when instructed to "remember me". It used to before the update last week. Is there a setting that is stopping Safari from doing this.

    I upgraded my iPad2 from ios7 to 8 last week. In iOS8, some websites like outlook.com force entry of Username and Password every time the sites are accessed, even if the device is not powered OFF or put into sleep mode. I have turned Password Auto Fill ON in iOS7. On another thread someone suggested removing sites that are not auto filling from the list of password autofill sites and toggling the ON/OFF button for Auto Fill. I've done both but still nothing is working.
    Do I have any options other than using Chrome?
    Does anyone from Apple ever reply to these posts?
    Thanks,
    Mike

  • How can I save a Keynote 6.5 file to be opened in Keynote 6.2.

    With the upgrade to Yosemite, Keynote was upgraded to 6.5. I have recently found out that you can not open Keynote 6.5 files in Keynote (6.2) for Mavericks. There is an option to save out to Keynote 09 but that really downgrades the deck messing up master slides at times as well. Anyone know how to Save out a 6.5 to 6.0+?

    Here is a support article that tells you how to do it - Save documents as a package or a single file in iWork for Mac
    Hope that helps.

  • How can i send my SWF for others (without Flash) to open?

    I have just finished making my interactive portfolio in Flash and after opening it in the SWF file it works perfectly. I now want to be able to E-Mail it to potential employers to see, but if they don't have Flash then they won't be able to open it with an SWF file. I tried setting the default program to open it with as Internet Explorer but have had all sorts of problems. Is there any easy way to be able to send them the file, and have them open it without having to sift through loads of unblock buttons or have the videos not play (two recent problem).
    Any help would be appreciated, many thanks
    Flasher87

    Your best bet is to place the swf on a web page on a server and simply send links to the web page.  Having an online portfolio is often a must have for certain professions, such as web design and similar trades.
    Emailing an swf file may hit a security wall on some servers.  A potential employer may not appreciate the extra work they might have to follow thru with to deal with a file you send them if they do not have the software for viewing it on hand.
    If you do email the swf file to anyone, then they need the Flash Player to be able to play the file.  So you should probably include a link for them to the Adobe site where they can download a player that supports your file.

  • How can you save your bookmarks in a different doc or file so that they won't get lost if a system reinstall happens..?

    i'd like the ability to save bookmarks to a separate doc or file so that i can ensure i have them if a system reinstall happens.

    https://support.mozilla.com/en-US/kb/Backing+up+and+restoring+bookmarks
    http://support.mozilla.com/en-US/kb/Backing+up+your+information

  • How can I save my contact sheets in Photoshop Lightroom?

    How can I save my contact sheets in Photoshop Lightroom? I see that you create the sheets under the Print tab but how can I save them as jpgs to my desktop?

    Kittie,
    I use this workflow and it works really well for me; it's really strange that it
    i did
    work for you and now it doesn't.
    I had a quick dabble and
    i may
    have an explanation. If I read your error message it looks like "New Folder" is trying to create a folder ~kittie/Desktop/3 Working/Contact Pages. However, the automator "create folder" won't create folders recursively like that - it will only work if "3 Working" already exists. Certainly I was able to reproduce the 'quick flash error message and bomb out with no results' effect by asking it to produce a directory from one that didn't already exist. When I added two Finder actions it didn't work as I expected - producing 74 files in subdirectories that just looped round and round when I expected one file and one directory.
    I added a shell script that renames the files too and it all works just dandy for me. If you let me know your e-mail I'll post the automator "app" file and shell script I use. It gives you sensibly named files instead of the sdkjfdfadkljfb.jpeg thing that comes out of automator.
    Damian

  • How to obtain the default serie for a document

    Hi,
        Anybody know how can obtain the default serie for a document throw a query??
    I can`t see the relation between the ONNM and the NNM1 tables because the 'dfltseries' field of the ONNM not corresponding with the 'Series' field of the NNM1.
    For example for an A/P Invoice
    Thanks!!

    Hi Mariano,
    According to the SDK Help file, you need to query the NNM2 table
    Series Default
    Table name: NNM2
    ObjectCode     UserSign     Series     DocSubType
    So, the query to retrieve the A/P default series for the manager user would be:
    SELECT T0.Series FROM [dbo].[nnm2] T0 WHERE T0.ObjectCode='13' AND T0.UserSign = 1
    From the SDK you can replace the T0.UserSign = 1 for T0.UserSign = oCompany.UserSignature to retrieve the default series for the current user...
    Regards,
    Vítor Vieira

  • How can I save the order of photos in albums? Even though I have set as album order they revert back

    How can I save the order of photos in albums in Elements 11? Even though I have set as album order they revert back to original order.

    Could you confirm that when you re-open the sorted album, the display order on the top bar just over the browsing space is still in 'album' order ? That order may have been changed to a date order. For me, I get the order of the last album I opened, not necessarily the 'album' order of the present album.

Maybe you are looking for

  • URGENT help needed in creating external xml video plalist. Please help!

    I was given an assignment to  create and external video playlist using an xml file.  I have never used  flash before, know nothing about encoding and all that was given to the  class in terms of instuctions was a short tutorial that has no  resources

  • Onekey & Partitioning - IdeaCentre K210 - 53134BU

    Hi, I Partitioned the (BIG) K210 "C" Drive into a "C" Drive for Vista and Onekey Rescue & Recovery, a "D" Drive which I use to install programs and apps, an "E" Drive where I keep the data files and a "F" Drive for photos. My question is, if I ever n

  • Slow sync on iPod Touch 2g

    i have a ipod touch 2nd gen 8gb and it syncs really slow on windows 7 x64, backing up is fast and itunes works great but when i sync about 800 songs it takes forever it has ios 4.2 on it. i also have quite a few apps. it seems like in windows 7 when

  • I have installed windows 7 on my MBP but cant get the drivers

    i have installed windows 7 home premium on my MBP running mountain lion from the windows official disc that came with a Dell lappy but i cant download the drivers , when i go to boot camp and try downloading drivers , it shows network error. the func

  • Cursor is Off When Using Adjustment Brush

    Is anyone else having or solved this problem? In Lighroom 3.5 (all updates installed), when I attempt to use the Adjustment Brush tool, my mouse cursor appears to be off. After choosing the tool, if I click a location on my picture, it acts as if I a